#WELCOME_USER# show only "Welcome:" when use custom template

I created custom page template and place #WELCOME_USER# in body:
<div id="header">
<div id="logo"><a href="#HOME_LINK#">#LOGO##REGION_POSITION_06#</a></div>
#REGION_POSITION_07#
<div id="navbar">
    #NAVIGATION_BAR#
    <div class="app-user">#WELCOME_USER#</div>
    #REGION_POSITION_08#
</div>
</div>
...... (other divs)If logged, I see on page with this template only "Welcome:",but on other pages (with standard apex templates) username shows normally.
Please help and sorry for bad english.

Replacing *#WELCOME_USER#* with *&APP_USER.* did not work for you?

Similar Messages

REPOST:Timing does not show up when using custom templates

all,
When I create an unstructured template and use it in a report with show timing set to true, the timing does not show up.
any tips

Correcting my previous reply,
Timing will NOT show if you are using custom template.
null

Page designer show small view when using page template and cannot be run

Dear Experts,
I need to make some page templates.
I have build 2 simple page templates, let say template0 & template1 which template1 using template0.
It show no any problem until I close my Jdeveloper & reopen it.
When I reopen template1, it show so small in designer (Jdeveloper window).
Is there any wrong?
I have build another template, just 1 template.
When I used it at the first time, no any strange behavior occur.
After ... (I don't exactly when), it give me the same view in my designer.
Then I force to use my first tempate (template1 which used template0 inside), I cannot run my application at all.
After wait several minutes, I found error log in my log messages.
*#### Server Instance DefaultServer could not be started: Server Instance was terminated.*
Above the message, I found another error messages:
*Jun 7, 2009 5:40:19 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: null/tag:xmlContent/id:dte_160d74a
org.xml.sax.SAXParseException: <Line 69, Column 7>: XML-20100: (Fatal Error) Expected 'EOF'.
* at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)*
Is there anyone that can help me to find out why this error occured?
Should I raise this problem to metalink or just can post it in this forum?
Many thanks for your supporting...
N.B: Below I attach my template0 (AHM000.jspx) and template1 (AHM001.jspx)
Best regards,
Dominic Chandra
AHM000.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM000"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:panelSplitter orientation="vertical" splitterPosition="60">
<f:facet name="first">
<af:decorativeBox theme="dark" topHeight="0px">
<f:facet name="center">
<af:panelHeader text="#{attrs.pageTitle}">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend">
<af:panelGroupLayout>
<af:outputText value="#{attrs.pageName}"/>
<af:outputText value="#{sessionScope.userState.userName}"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
<f:facet name="info">
<af:statusIndicator/>
</f:facet>
</af:panelHeader>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelSplitter orientation="vertical" positionedFromEnd="true"
splitterPosition="20">
<f:facet name="first">
<af:decorativeBox theme="light" topHeight="0px">
<f:facet name="center">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="top"/>
</af:decorativeBox>
</f:facet>
<f:facet name="second">
<af:panelGroupLayout inlineStyle="text-align:right;">
<af:outputText value="#{ahmwebtemplateBundleAHM000.VERSION} #{attrs.appVersion}"
inlineStyle="color:Navy;"/>
<af:outputText value="© 2009 PT Astra Honda Motor"
inlineStyle="color:Navy; font-weight:bold;"/>
<f:facet name="separator">
<af:spacer width="10" height="10"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM000</display-name>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
</component>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>
AHM001.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="ahmwebtemplateBundleAHM001"
value="#{adfBundle['com.ahm.lib.view.template.AHMWebTemplateBundle']}"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<af:pageTemplateDef var="attrs">
<af:pageTemplate viewId="/template/AHM000.jspx">
<f:facet name="mainArea">
<af:panelSplitter splitterPosition="#{attrs.searchAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="searchArea"/>
</f:facet>
<f:facet name="second">
<af:panelSplitter positionedFromEnd="true"
splitterPosition="#{attrs.infoAreaPosition}">
<f:facet name="first">
<af:facetRef facetName="mainArea"/>
</f:facet>
<f:facet name="second">
<af:facetRef facetName="infoArea"/>
</f:facet>
</af:panelSplitter>
</f:facet>
</af:panelSplitter>
</f:facet>
<f:attribute name="pageTitle"
value="#{attrs.pageTitle}"/>
<f:attribute name="pageName" value="#{attrs.pageName}"/>
<f:attribute name="appVersion" value="#{attrs.appVersion}"/>
</af:pageTemplate>
<af:xmlContent>
<component xmlns="http://xmlns.oracle.com/adf/faces/rich/component">
<display-name>AHM001</display-name>
<facet>
<description>Search Area</description>
<facet-name>searchArea</facet-name>
</facet>
<facet>
<description>Main Area</description>
<facet-name>mainArea</facet-name>
</facet>
<facet>
<description>Info Area</description>
<facet-name>infoArea</facet-name>
</facet>
<attribute>
<attribute-name>pageTitle</attribute-name>
<attribute-class>java.lang.String</attribute-class>
<default-value>Page Title</default-value>
<required>true</required>
</attribute>
<attribute>
<attribute-name>
pageName
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
ahmxxyyynnnznn
</default-value>
<required>
true
</required>
</attribute>
<attribute>
<attribute-name>
appVersion
</attribute-name>
<attribute-class>
java.lang.String
</attribute-class>
<default-value>
1.0.0
</default-value>
</attribute>
<attribute>
<attribute-name>
searchAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
<attribute>
<attribute-name>
infoAreaPosition
</attribute-name>
<attribute-class>
java.lang.Integer
</attribute-class>
<default-value>
200
</default-value>
</attribute>
</component>
<af:decorativeBox>
<f:facet name="center"/>
<f:facet name="top"/>
</af:decorativeBox>
</af:xmlContent>
</af:pageTemplateDef>
</jsp:root>

Hi...
Thanks for asking....
As I put in my post before, I include template0 in my template1, as seen in template1 (AHM001):
<af:pageTemplateDef var="attrs">
*<af:pageTemplate viewId="/template/AHM000.jspx">*
I use AHM000 inside AHM001. I use this approach to build many template based on one basic design.
Actually, I don't think the problem is in page template usage because as I submitted paralel to Metalink, I've already not called template0 in template1 but I copy template0's contents to template1.
Unfortunately, page designer show small view and below error messages still occured.
*Jun 7, 2009 10:25:20 PM ComponentMetadataHandler _error*
WARNING: error parsing component tag in file: /AhmTestTemplate-ViewController1-context-root/template/AHM001.jspx/tag:xmlContent/id:null
org.xml.sax.SAXParseException: <Line 115, Column 51>: XML-20100: (Fatal Error) Expected 'EOF'.
Fortunately my application can be run already altough the error message still logged.
Many thanks,
Dominic C.

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How can i set "Createdby" attribute When using Custom JheadStart Security

Hello
We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object?
thanks

See a similar question at History Attributes when using Custom Authentication Type

HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display. I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities. It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker. What to do?

Hi jlk166,
I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
http://support.apple.com/kb/ts5196
Thanks for using the Apple Support Communities. Have a good one!
-Braden

PO PDF errors when using custom RTF Template, but works with custom xsl

Hi,
I have done following set up steps for PO PDF
Setup / Organizations / Purchasing Options / Control TAB / set 'PO Output Format' = 'PDF'
setup / purchasing / document types / select "Standard Purchase Order" / Set the Document Type Layout to your new template.
But with the RTF template the PO Output for communication completes with error. However when I use custom XSL-FO style sheet, it works.
Can anyone help me how I can make my RTF work? When click on the preview of the template, it shows the PDF output though. Am I missing any other set up steps? Your help is greatly appreciated.
Thanks,
Sharmila

I think the only way to have control over the html output is to enclose the tags or any information within a borderless table and align the text and table as necessary...
Thanks,
Bipuser

When use custom authetication it shows some characters on screen after logo

Dear All,
I have developed a application and use custom authentication schema for that. It works fine on my local pc and then I have moved it to another pc (export and then import) it works fine on that as well.
Now I have moved it to the production server. When authentication failed it shows error message and stay in log on page. But when I provide the correct user name and password, then it shows multiple occurance of login url in page body.
Did anyone has any idea about this.
When authenticate success I get below output.
Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 Location: f?
p=ETLUI:COM_LOGIN:2888953545161107 Location: f?p=ETLUI:COM_LOGIN:2888953545161107 * ETLUI means my application alias and COM_LOGIN is my login page alias. So basically it shows link to the login screen multiple time. At this time url is looks like below
http://prodsrv:8080/apex/wwv_flow.accept Development and Production Apex Version: 4.0.2.00.07
Development OS: Windows 2000
Production OS : Linux
Thanks in advance.

Works ok after using Apex Listener.

"Type mismatch" error in IE7/8 when using custom Actions Menu Image

Hi all,
in APEX 4.2: when using a custom image in the "Actions Menu Image" attribute in an interactive report, I get a "Type mismatch" error in IE7/8 when refreshing the report through PPR (filtering, sorting, paginating etc.). When I leave the "Actions Menu Image" field empty, everything works fine. The error doesn't seem to happen in IE9 (unless using compatibility mode), or in any non-IE browser.
I've been able to reproduce the issue in an application on apex.oracle.com:
http://apex.oracle.com/pls/apex/f?p=69347:1
Some debugging seems to indicate that the following line in widget.interactiveReport.js is the culprit:
lTemp.parentNode.replaceChild($x('apexir_WORKSHEET'), lTemp);Does anybody know if this is a known issue, or if there is some workaround?
Thanks,
Tobias

Hi,
Great solution Paul! It cost me a while before I found out the Action Menu Image was causing my interactive reports to stop refreshing in IE10 and not other browsers. Your solution works great, I've implemented it with a few minor adjustments:
- Put the css in report template (for some reason it didn't work in our own application stylesheet)
- replace 'url("/c/action_dropdown.gif")' with 'url("&APP_IMAGE_PREFIX./<path_to_image>")'
- place one dynamic action on page 0: after refresh of '#apexir_DATA_PANEL' , set event scope to "Dynamic".
- Let the Dynamic action also fire on page load.
- To make sure the dynamic action only works for pages with an interactive report add condition of type 'Exists' with expression:
select 1
from   dual
where :APP_PAGE_ID in (select page_id
                                        from   apex_application_page_ir
                                        where application_id = :APP_ID
Best regards,
Vincent Deelen

No preview in FCP X when using custom icc profiles

Hello,
since I switched to Lion 10.7.4 from Snow Leopard I have no preview when I want to playback videos from the event browser. I calibrated my Eizo Display with the latest ColorNavigator6 software using a Spyder4 device. The generated Eizo icc profiles are version 2.2. My second display is calibrated with the Spyder Pro4 Software. This icc profile is v2.4.
What I found out so far:
- I open System Preferences > Displays > click on "Color" tab and check "Show profiles for this display only". When I change to a profile that is listed everything works fine. But my custom icc profiles both are not available now.
- when I uncheck "Show profiles for this display only" my custom icc profiles get listed. When I select one of them Final Cut Pro X (10.0.5) doesn´t preview anything and hangs.
- I compared my custom profiles with one that is listed "for this display only" using ColorSync. The only difference that I found were some missing and different tags in the custom profiles.
Do I have to modify my profiles to work with calibrated Displays in FCP X? How / what do I modify?
Regards, Thomas

So how does color managment work in FCP X when I can´t calibrate my monitor or use icc profiles from a calibration software?

StandardView button is being selected in the ribbon even user clicks on Datasheet view of a library created using custom template.

Hi,
We have an issue with one of the library created using custom library template. Eventhough user selects Datasheet view from the ribbon it's showing Standard view button as selected. However content is being correctly in the grid view. Can some one help me
in sorting this issue.
NB: Functionality is working as expected with library created using OOB document library template.
In the above screen shot Datasheet was selected.but Standard View was highlighted.
Is that something should be done in schema.xml file?
Thanks,
Venugopal

Hi Venugopal Pulagam,
This seems a weird issue, based on my understanding, it is not caused by SharePoint. I haven’t seen that there is settings in list instance schema file can effect this to happen.
To narrow down this issue, would you please check whether this can be reproduced in other type of browser?
And as this only happens for this specific library, please create a new list based on the template, check the result.
How you create the list template, please share the steps to reproduce the issue.
Thanks,
Qiao Wei
TechNet Community Support

Trouble using Custom Template and Saving Resulting Document. Help!

I created a Custom Template in Numbers '09. When I go hit "New from Template Chooser", there it is. I've tried entering info directly into the template, as well as duplicating it and entering info in the duplicated document. I can enter the info just fine, but.... Either way, when I'm done I do not have an option to Save, Save As or anything like that. I only see "Save As Template".....but it's already a perfectly good template. I don't want to Save As Template and create another template!!!. I want a named document saved, using the great template I already put together. Is this a problem? What's up? Why can't I do this???? Please help!

I'm on an iMac running 10.7.5. (Afraid to go further because I have FInal Cut Pro 7 and I'm very attached to it....I'm afraid to upgrade my OS and have FCP not work! I'm a pro and not so willing to go to FCP 10). Anyway, I'm on an iMac 3.06 GHz Intel Core 4 GB, 1333 MHz RAM.
I'm running Numbers ''09 and don't have 13, so it's an 09 template entering 09 info. It's perfect. I run webinars and it contains all of the status for media and every detail of any upcoming webinar production. My goal is to open the template, enter the info, and save it with the name of the webinar client. Then open again, enter for another client, save, etc.
It's just 09 all the way through. It says I can Save a Version or Save as Template.
Should I open a template and then Duplicate so it's a fresh document? I do that sometimes in hopes of seeing an option to SAVE AS. Sometimes I open and Don't Duplicate, but just use the template. Either way I see no way of saving the document with the specific information for the client. I don't want to Save As Template! Who wants hundreds of templates running around that are all virtually the same except for the info entered within it.
Am I missing the boat here?

Anychart: Bug when using chart template and Javascript

Hi all,
When I create a chart using custom xml and a template -
<templates path="#IMAGE_PREFIX#Chart_templates/my_chart_template.xml"/>If I call toggle a series using some javascript:
   var chart = getChart(); // function created by the chart embedding javascript to capture a reference to the chart object
   chart.showSeries('population_average', $('input[is_series_toggle="true"]').is(':checked'));
   chart.refresh();The series is toggled correctly but the chart is refreshed without applying the chart template, so it looks ugly.
Anychart claim this is an Apex specific issue because Apex uses a special build of Anychart? Anyone else encountered this problem and have a workaround. Or any other suggestions would be welcome.

Hello Sara,
The behavior you are describing is a long time known issue. It is a bug that should have been resolved by now, but for some reason was not. Maybe it’s because none of the default (built-in) page templates is using images with TABs.
The workaround is to create your own img tag in the appropriate page template section, using the #TAB_NAME# substitution string. The principle is to name your corresponding images like current_#TAB_NAME#.gif and non_current_#TAB_NAME#.gif, where the #TAB_NAME# part in the file name is replaced with the actual tab name. So, for a TAB called EMP, you’ll have two image files by the names current_EMP.gif and non_current_EMP.gif.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

#WELCOME_USER# show only "Welcome:" when use custom template

Similar Messages

Maybe you are looking for