Went from wrt 310n to 610n now i can't get it to connect to the internet.
Hi, I was wondering if anyone had this problem. I changed my router from an old linksys wireless G speedboost to the wrt 310n. The setup disc was wonderful and I had no problems at all. What surprised me was that the setup disc knew I had a router and guided about changing the router.. Everything went well and I had no problems for a day. Then I saw the dual band 610n wireless n. So I took out the wrt 310n and exchanged it for the 610n. During the setup disc which looked almost similar to the 310n one, I encountered a slight problem. It states that I don't have an internet connection. I rebooted everything and still does not work. I'm connected to the network but no internet connection. My computer gets an IP address of 192.168.1.100. I checked my username and password because I'm using a PPPOE DSL connection. I hooked up my modem directly to the computer and I got an internet connectoin. So I did the setup disc. When it was time to switch to the router, it still does not pick up an internet connection. Any tips in solving this? Is my stuff defective?
Thanks for responding. I tried that method and it didn't work for me. Also, I need the MTU to be above 1400 for online play. However, I found this on amazon review about the WRT610N. http://www.amazon.com/review/product/B001AZ01EO?showViewpoints=1 Seems like everyone is either enjoying this router or having problems with it.
This guy says the solution is to change the router's address to 192.168.2.1. Ok I'm confused, but why does changing the router's address seem to work for some people. I'm gonna try this when I get home from work later. But can anyone tell me why changing the router's address may be the answer to get this router to connect to the internet? Has this solution worked for anyone else that was having the same problem. Also, why isn't this implemented in wrt610n, but all the router versions before it seems to be fine? (WRT310N, WRTGS, etc.) You would think the wrt610n is almost like the top of the line router you can get for your home that they would have implemented this in the setup disc or the router. For it being Dual band maybe? Who knows, this is a mystery to me.
Solution
http://www.amazon.com/review/R16YOJTVKHJI15/ref=cm_cr_pr_cmt?%5Fencoding=UTF8&ASIN=B001AZ01EO&nodeID...
I also found this answer in the linksys docs as well under step #2. Almost makes the setup disc useless to me.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687&lid=7783210227B...
Not too sure why that would work. I'm kinda embarassed to ask this since I graduated in networks and security of a Comp Sci degree. . Hope my teacher isn't reading this.
Similar Messages
-
I just upgraded my iMac to OS 10.8.5 from 10.6.8 and now I can not get the calendars on my Mac and my iPhone 4s (running iOS 8.3) to sync. I already tried replacing the calendars on the phone with those on my computer but nothing happened.
Set up iCloud
Set up iCloud (2) -
I recently downloaded a movie from itunes from my work computer and now I can't get it on my home computer. I have already hit the button add recent downloads. Any suggestions?
If it's a purchase, click here and follow the instructions.
If it's a rental, you can't.
(91159) -
New Netgear Router and now I can't get a wireless connection for my K5400 printer.
I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP
On the printer: Setup > Network > Restore Defaults. From the same Network menu, run the Wireless Setup Wizard.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.
-
I'm trying to learn how to use Xcode. I've create a simple Hide App app from a youtube video tut, but I can't get it to export with the icon I've chosen. Any clues why?
We didn't do that video. Why are you asking here?
Those videos are usually outdated....
Use the current tools etc., in the iOS Dev Center and iTunes/iTunes U ~ Stanford. -
I have a new computer an Dell Inetel Celeron 2020 with Windows 8. I had interent connection on my old desktop and to my Iphone and Ipad, however now I cannot get my Ipad to connect to the internet whatsoever. i have messed with this since Wednesday of last week and I am exhausted from it. Please help.
So just the ipad cannot connect to the network? Does it connect to any other network?
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, turn wifi off. Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Go to settings/genreral/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer suppot website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199 -
I tried to update my browser from 3.6 to4.0. On restarting the computer I found I could no longer connect to the internet. I then connected to the internet using Internet Explorer and removed the mozilla browser and reinstall Mozilla firefox 4.0. Again the browser using this updated version didn't work. So reinstalled Mozilla firefox 3.6 and it worked.
It appearsMozilla firefox 4.0 has a problem.
My operating system is Windows XP pro.Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only -
why cant itunes download songs from the itunestore,the download fails and thr error msg says check your connectivity,however the internet is connected and working fine.I did reinstall itunes
I have the same issue...I called Adobe and they said that Acrobat 8 is not compatible with Windows 7 ...so I tried installing the suite again without Acrobat and still the same issue....does anyone know if this issue is resolved by getting the new CS5 suite??? That is my only option it seems like...no one knows what's going on with the internet issue....even Adobe
HELP -
My computer restarted while it was installing the shuffle for the first time. Now I cannot get my computer to register the connection and I cannot put music on my shuffle. How can I get my computer to install the driver again and start using my shuffle?
Hey jessandmatt17,
If you cannot get your iPod Shuffle to show up in iTunes, check out the following articles depending if it shows up on your computer within Windows Explorer. With the iPod Shuffle plugged in check in Windows Explorer to see if it shows up as a removable device. They both will help no matter how the iPod Shuffle shows up.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I changed the batteries in my 10 key and now I can't get it to connect
I have changed the batteries in my 10 Key and now can't get it to connect with my computer. The keyboard works fine but the 10 Key green light comes on then turns off immediately.
Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
Note: Apps are forever tied to the Apple ID used to originally obtain them. They cannot be updated using any other Apple ID other than the one they were originally obtained with. -
I am looking at setting up a Local Wifi Network using a Mac and Airport Extreme.
I wish to store presentations on the Mac.
I wish to teach from the presentations through Apple TVs in my classrooms using IPad to control presentation, annotate etc
I don't want to have to upload presentation to iPad from Mac as this will be in server room.
I don't want to access internet so iCloud Drive is out of the question.
What options do I have?
Many thanks
DaveYou would need to find an app that lets you remotely access the Mac (e.g. Logmein). You would need to be aware of how much the network can handle.
-
I messed with basically everything in the Display Settings and Phone Settings, trying to get it back to the same display I had on my old phone. But now it won't do anything?
I literally just bought it and activated it within the last 30 minutes. If someone has an idea as to what I did, that would be great. Thanks so much in advanced.Let's get your phone back to work as intended pronto cowsbark! Please contact our prepaid customer service team at 888-294-6804.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport -
I changed the password on my Yahoo mail account and now the phone will not let me enter the new password. The mail account is greyed out in the settings menu.
Try deleting the account and set up a new one. Also make sure to not sync the phone with old email settings.
-
I accidentally got into Full Screen mode in iPhoto, and can't figure out how to get out of it. The last item in View is unresponsive (Exit full Screen). I've looked online but can't find any way to get out of iPhoto full screen--no arrows show on top right or bottom right. I cannot find 'events' or crop photos, the only option I have is to scroll through a certain number of photos that I don't want to see. Please, I just want to get out of Full screen mode. Please help. Thanks.
Give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try full screen again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.
Maybe you are looking for
-
so i finally repurched time capsule after the first was a defect now i wanna connect both my d-link and time capusle together but it seems its not working ive tryed logging in to my own wep connection and a new one still not working i connected the d
-
I purchased my iPad in the States, can I charge it in the UK with an adapter or do I need a voltage converter?
-
I just talked to an apple representativ and.....
she told me..because i ordered my nano last night...it would come with a pouch that did not protect the nano very well...but she told me that the material that the nano was being made with was replaced with a " new space age " material that would pre
-
Communication between Clusters Problem
Hi all 1. Is it possible for a bean, being hosted in a cluster to call a bean which is hosted in another cluster? We have a problem with the role information, which gets wrong at every second call. We have the following
-
Awkey for awtyp = 'BKPF' and awtyp = 'MKPF' in BKPF table
At my current client, there is the following situation in the BKPF table: When the awtyp is 'BKPF' in the bkpf table, the awkey is number/company/year, as expected. But when the awtyp is 'MKPF' in the bkpf table, the awkey is just number/year, with n