What action shouldbe taken

Enqueue: Elem. lock 0 contains unpermitted lock modes.lock object WD_HEADE

gpaai wrote:
> Hi Everyone!
>
> I'm sure that the following will be silly simple to
99.9% of the users here so
> here goes...
>
> On the sync of a tweened layer I have
stream>repeat>1. What I want is for the
> tweened layer to play through once then have it go to
another page immediately
> after playing.
>
> Thanks,
> Gary
Stream sound is timeline based, it must have enough frames to
run to complete playback.
So, simply place stop action on the last frame of your stream
sound layer to prevent it from
going back to first frame, and getURL action, which takes you
to the new URL after the playback
is done.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Wanted to know what actions are taken on the database

Dear Sir
I wanted to find out what actions are performed explicitly on the database.For example I apply a patch on the database of create object,drop object,insert object,update object ...etc.Does Oracle Maintain any logs for such object.?....
.I wanted to find out what actions are performed on the database on daily basis?....Can we maintain the log of it?
Appreciate your help on the above?
Regards

[email protected] wrote:
Dear Sir
But I wanted to know If anybody firing any DML,DDL OPERATION IN THE DATABASE.CAN ORACLE MAINTAINS ANY AUDIT OF THAT?
RegardsPeople dont perform commands on the database level but they do it on the tables. So you would be setting the auditing on the objects actually. Not to nick pick but the terminology should be correctly used as it may come as an confusion later on. Depending on what you need, that type of auditing can be set on the table.
Also make a habit to post your db version and o/s for sure in all the posts.
HTH
Aman....

How to find Latch and what actions need to be taken when there is a latch

Hi
Can you please tell me how to find Latch and what actions need to be taken when there is a latch?
Thanks
Regards,
RJ.

1. What is a latch?
Latches are low level serialization mechanisms used to protect shared
data structures in the SGA. The implementation of latches is operating
system dependent, particularly in regard to whether a process will wait
for a latch and for how long.
A latch is a type of a lock that can be very quickly acquired and freed.
Latches are typically used to prevent more than one process from
executing the same piece of code at a given time. Associated with each
latch is a cleanup procedure that will be called if a process dies while
holding the latch. Latches have an associated level that is used to
prevent deadlocks. Once a process acquires a latch at a certain level it
cannot subsequently acquire a latch at a level that is equal to or less
than that level (unless it acquires it nowait).
2. Latches vs Enqueues
Enqueues are another type of locking mechanism used in Oracle.
An enqueue is a more sophisticated mechanism which permits several concurrent
processes to have varying degree of sharing of "known" resources. Any object
which can be concurrently used, can be protected with enqueues. A good example
is of locks on tables. We allow varying levels of sharing on tables e.g.
two processes can lock a table in share mode or in share update mode etc.
One difference is that the enqueue is obtained using an OS specific
locking mechanism. An enqueue allows the user to store a value in the lock,
i.e the mode in which we are requesting it. The OS lock manager keeps track
of the resources locked. If a process cannot be granted the lock because it
is incompatible with the mode requested and the lock is requested with wait,
the OS puts the requesting process on a wait queue which is serviced in FIFO.
Another difference between latches and enqueues is that
in latches there is no ordered queue of waiters like in enqueues. Latch
waiters may either use timers to wakeup and retry or spin (only in
multiprocessors). Since all waiters are concurrently retrying (depending on
the scheduler), anyone might get the latch and conceivably the first one to
try might be the last one to get.
3. When do we need to obtain a latch?
A process acquires a latch when working with a structure in the SGA
(System Global Area). It continues to hold the latch for the period
of time it works with the structure. The latch is dropped when the
process is finished with the structure. Each latch protects a different
set of data, identified by the name of the latch.
Oracle uses atomic instructions like "test and set" for operating on latches.
Processes waiting to execute a part of code for which a latch has
already been obtained by some other process will wait until the
latch is released. Examples are redo allocation latches, copy
latches, archive control latch etc. The basic idea is to block concurrent
access to shared data structures. Since the instructions to
set and free latches are atomic, the OS guarantees that only one process gets
it. Since it is only one instruction, it is quite fast. Latches are held
for short periods of time and provide a mechanism for cleanup in case
a holder dies abnormally while holding it. This cleaning is done using
the services of PMON.
4. Latches request modes?
Latches request can be made in two modes: "willing-to-wait" or "no wait". Normally,
latches will be requested in "willing-to-wait" mode. A request in "willing-to-wait" mode
will loop, wait, and request again until the latch is obtained. In "no wait" mode the process
request the latch. If one is not available, instead of waiting, another one is requested. Only
when all fail does the server process have to wait.
Examples of "willing-to-wait" latches are: shared pool and library cache latches
A example of "no wait" latches is the redo copy latch.
5. What causes latch contention?
If a required latch is busy, the process requesting it spins, tries again
and if still not available, spins again. The loop is repeated up to a maximum
number of times determined by the initialization parameter SPINCOUNT.
If after this entire loop, the latch is still not available, the process must yield
the CPU and go to sleep. Initially is sleeps for one centisecond. This time is
doubled in every subsequent sleep.
This causes a slowdown to occur and results in additional CPU usage,
until a latch is available. The CPU usage is a consequence of the
"spinning" of the process. "Spinning" means that the process continues to
look for the availability of the latch after certain intervals of time,
during which it sleeps.
6. How to identify contention for internal latches?
Relevant data dictionary views to query
V$LATCH
V$LATCHHOLDER
V$LATCHNAME
Each row in the V$LATCH table contains statistics for a different type
of latch. The columns of the table reflect activity for different types
of latch requests. The distinction between these types of requests is
whether the requesting process continues to request a latch if it
is unavailable:
willing-to-wait If the latch requested with a willing-to-wait
request is not available, the requesting process
waits a short time and requests the latch again.
The process continues waiting and requesting until
the latch is available.
no wait If the latch requested with an immediate request is
not available, the requesting process does not
wait, but continues processing.
V$LATCHNAME key information:
GETS Number of successful willing-to-wait requests for
a latch.
MISSES Number of times an initial willing-to-wait request
was unsuccessful.
SLEEPS Number of times a process waited a requested a latch
after an initial wiling-to-wait request.
IMMEDIATE_GETS Number of successful immediate requests for each latch.
IMMEDIATE_MISSES Number of unsuccessful immediate requests for each latch.
Calculating latch hit ratio
To get the Hit ratio for latches apply the following formula:
"willing-to-wait" Hit Ratio=(GETS-MISSES)/GETS
"no wait" Hit Ratio=(IMMEDIATE_GETS-IMMEDIATE_MISSES)/IMMEDIATE_GETS
This number should be close to 1. If not, tune according to the latch name
7. Useful SQL scripts to get latch information
** Display System-wide latch statistics.
column name format A32 truncate heading "LATCH NAME"
column pid heading "HOLDER PID"
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+)
and a.latch# = c.latch#
order by a.latch#;
** Given a latch address, find out the latch name.
column name format a64 heading 'Name'
select a.name from v$latchname a, v$latch b
where b.addr = '&addr'
and b.latch#=a.latch#;
** Display latch statistics by latch name.
column name format a32 heading 'LATCH NAME'
column pid heading 'HOLDER PID'
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+) and a.latch# = c.latch#
and c.name like '&latch_name%' order by a.latch#;
8. List of all the latches
Oracle versions might differ in the latch# assigned to the existing latches.
The following query will help you to identify all latches and the number assigned.
column name format a40 heading 'LATCH NAME'
select latch#, name from v$latchname;

As a Mac user, what action do I take in relation to the Heartbleed bug?

As a Mac user, what action do I take in relation to the Heartbleed bug?

None except don't visit servers that have not updated their openssl server.

HT1386 when i plug my iphone 4s into my computer is does not show in itunes, When the menu comes up on my computer for what action I want to take it shows no options for itunes. My phone worked before, Im not sure why it is not working now??

I just recently tried to plug my iphone 4s into intunes. It comes up with the menu of what action do you want to take. My only options only involve photos and videos nothing to do with syncing or music. When I open itunes it does not even show my device in itunes. What do I do??

uninstall itunes
you may have to manually delete anything related to itunes in regedit
reboot and reinstall itunes

I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== Today

Me too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

Buying and item from iTunes, What action do you take in between having chossen an item to purchase and then being able to click on the word BUY. I have clicked on the price as it satates in the tutorial and I get a list of actions such as gift this item

This question is for anyone who has purchased an item from iTunes.
What action or actions do you take inbetween having selected the item to be purchased and having the word BUY appear on your screen for you to clic on it?
I have been told to clic on the price. When I do that this list appears; gift this, add to wish list, tell a friend, copy link, share on Facebook & share on Twitter.
Should I clic on one of thses or press enter after having clicked on one of these?
What action do you take inbetween having chossen an item to purchase and being able to see the word BUY?

Thank you for the answer. Apple support has been working on this question for several days.
I don't think they see any difference between the two tabs as I didn't think there was any seperation and the arrow was the place to clic on the price.
What would it take to get your statment added to the iTune tutorial?
For that matter what would it take to get actual tutorials listed under the heading Tutorials listed at the bottom of most iTunes screens. If you clic on the heading Tutorials at the bottom of iTunes pages it lists ads not tutorials.
Thanks again for your help.

What action do I take when this error warning appears? Whilst executing onClick in Media Query Manag

What action do I take when this error warning appears? Whilst executing onClick in Media Query Manager.htm, the following JavaScript error ocurred: At line 157 of the file "Macintosh HD: Application: Adobe Dreamweaver CS5>5: Configuration Commands: Media Query Manager.js": getDocumentDOM: Argument nember 1 is invalid
Thank you

You'll get better answers in teh DW forum...
Mylenium

What actions will trigger azure worker role reboot

Hi team,
we have a application host in worker role, the worker process will create a new process if it receive a request,
i we want to update the worker and keep new process still working smoothly, what we should do during the Udate.
we did some test for this and found that when updating the worker role via portal, the worker role VM will not reboot,
will all update not cause worker role reboot?
another question, what actions will cause worker role reboot,so that we could avoid them when doing update.
thanks in advance.

Hi,
Thanks for Posting. I see that no one in the forum community has answered the question. hope the following resource points you in the right direction.
There are certain implicit and explicit factors that may force the runtime to reboot or re-launch the role instances. Implicit factors are internal to Azure environment and explicit factors are those that are initiated through the change in configuration
files or by performing an in-place upgrade.
Refer to this link :
http://yourstory.com/2012/03/understanding-windows-azure-runtime-part-ii/
and
http://msdn.microsoft.com/library/azure/ff729422.aspx
Regards,
Nithin.Rathnakar

550 Requested action not taken: mailbox unavailable (from website form)

Hi there. I hope somebody can help me with this one.
We are running an Exchange 2010 server. We also have a website hosted externally where users can submit info via a form. The website form sends an email to [email protected]. It has been working fine, but all of the sudden, emails from the
website are not coming through. Emails sent to [email protected] from anything but the website work just fine. The error message is "550 Requested action not taken: mailbox unavailable."
I am at a loss as to how to fix this. This happened a couple of months ago. I spent hours trying to fix it, when *poof*, it just seemed to fix itself. I couldn't tell that anything I had done even fixed it(and I hadn't done much).
Here is the full text of the email error message:
From: Mail Delivery System [[email protected]]
Sent: Friday, December 27, 2013 11:19 AM
To: INFO
Subject: Mail delivery failed: returning message to sender
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its recipients. The following addresses failed:
<[email protected]>
SMTP error from remote server after RCPT command:
host mail.domain.com[76.164.20.91]:
550 Requested action not taken: mailbox unavailable
--- The header of the original message is following. ---
Received: from icpu2798.perfora.net (infong530.lxa.perfora.net [74.208.16.79])
by mrelay.perfora.net (node=mrus0) with ESMTP (Nemesis)
id 0Mb6xv-1WCEwr3vhL-00KIuD; Fri, 27 Dec 2013 14:19:15 -0500
Received: from 64.122.5.254 (IP may be forged by CGI script)
by icpu2798.perfora.net with HTTP
id 3ovjx0-1VVVbA3OuE-011ONA; Fri, 27 Dec 2013 14:19:14 -0500
X-Sender-Info: <[email protected]>
Precedence: bulk
To: [email protected]
Subject: Update Owner Info Request
Date: Fri, 27 Dec 2013 14:19:14 -0500
From: Update Owner Info Form <[email protected]>
Message-ID: <[email protected]>
X-Priority: 3
X-Mailer: PHPMailer [version 1.73]
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="b1_8695b5d02b44c4eae95033f81b999a98"
X-Provags-ID: V02:K0:53ln0xw/tvQG8M7ifWOUO4iaRNVVQ/2jTej143S0V/6
GRlTqQmDPYAeqkJzzZiA4c2yn28akfnnD3XGDQuBU4mWjgGGr1
JbNurwD0ZL+1a8T6O0hfhVwyZxiaGZkIvYdFjRMVb0p/mZ+WTl
TAIXGQHL7ov8pwmIfVwRiNuxFnOWignDb8VLJNIJ43klDr0wwE
BDC/pJUTxAPor11ikmcqgIvBhdnHVYNHCcigEDuIl4hKcFQ+B8
cxowzMn5zTNz5Esbu7GGlkk6icWV6SFRCSiwqMTtqV1YoawRhW
ikXUAyVFnBfZLScBES/PmoDItpJxmdE2/+MDZVzSZaZAApTRss
fNDXreUJEoLfl5YttLeUY1PSkaLg1+6m1mX2RwGZFnVpTL34z5
p4C4oknHf0lNmoaYTD/H7848a4Bu67bNVE=

Hello,
Thank you for your update.
If you have any othere question, please free let me know.
Cara Chen
TechNet Community Support

DB -What action have been done by until cancel?

ORALCE 8174/Hotbackup:
SQL> SELECT TO_CHAR(CHECKPOINT_CHANGE#) DATAFILE_SCN, TO_CHAR(LAST_CHANGE#) DATAFILE_LASTSCN FROM V$DATAFILE;
2 /
DATAFILE_SCN DATAFILE_LASTSCN
9220396163609
9220396163791
9220396163711
9220396163711
9220396163764
9220396163764
9220396163789
9220396163611
9220396163624
9220396163791
9220396163655
DATAFILE_SCN DATAFILE_LASTSCN
9220396163655
12 rows selected.
SQL> SELECT TO_CHAR(CHECKPOINT_CHANGE#) DATAFILE_HSCN FROM v$datafile_header
2 /
DATAFILE_HSCN
9220396163609
9220396163667
9220396163687
9220396163711
9220396163748
9220396163764
9220396163789
9220396163611
9220396163624
9220396163791
9220396163640
DATAFILE_HSCN
9220396163655
12 rows selected.
SQL> recover database using backup controlfile;
ORA-00279: change 9220396163609 generated at 07/28/2007 00:01:07 needed for thread 1
ORA-00289: suggestion : /data1/newdb/orcl/arch/arch_1_13876.arc
ORA-00280: change 9220396163609 for thread 1 is in sequence #13876
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00279: change 9220396171447 generated at 07/28/2007 01:31:22 needed for thread 1
ORA-00289: suggestion : /data1/newdb/orcl/arch/arch_1_13877.arc
ORA-00280: change 9220396171447 for thread 1 is in sequence #13877
ORA-00278: log file '/data1/newdb/orcl/arch/arch_1_13876.arc' no longer needed for this recovery
ORA-00308: cannot open archived log '/data1/newdb/orcl/arch/arch_1_13877.arc'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
SQL> SELECT TO_CHAR(CHECKPOINT_CHANGE#) DATAFILE_HSCN FROM v$datafile_header;
DATAFILE_HSCN
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
DATAFILE_HSCN
9220396171447
12 rows selected.
SQL> SELECT TO_CHAR(CHECKPOINT_CHANGE#) DATAFILE_SCN, TO_CHAR(LAST_CHANGE#) DATAFILE_LASTSCN FROM V$DATAFILE;
DATAFILE_SCN DATAFILE_LASTSCN
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
9220396171447
DATAFILE_SCN DATAFILE_LASTSCN
9220396171447
12 rows selected.
SQL> SELECT TO_CHAR(CHECKPOINT_CHANGE#) DB_SCN,TO_CHAR(CONTROLFILE_CHANGE#) CONTROL_SCN FROM v$database;
DB_SCN CONTROL_SCN
9220396163608 9220396171447
SQL>
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/data1/newdb/orcl/datafile/system01.dbf'
*********why still show above error and can't open db?
SQL>[color=Red] recover database using backup controlfile until cancel;[color]
ORA-00279: change 9220396171447 generated at 07/28/2007 01:31:22 needed for thread 1
ORA-00289: suggestion : /data1/newdb/orcl/arch/arch_1_13877.arc
ORA-00280: change 9220396171447 for thread 1 is in sequence #13877
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
[color=Red]AUTO[color]
ORA-00308: cannot open archived log '/data1/newdb/orcl/arch/arch_1_13877.arc'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
[color=Red]SQL> recover database using backup controlfile until cancel;[color]
ORA-00279: change 9220396171447 generated at 07/28/2007 01:31:22 needed for thread 1
ORA-00289: suggestion : /data1/newdb/orcl/arch/arch_1_13877.arc
ORA-00280: change 9220396171447 for thread 1 is in sequence #13877
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
[color=Red]CANCEL[color]
Media recovery cancelled.
SQL> alter database open resetlogs;[color=Red][color]
Database altered.
*********What action have been done by UNTIL CANCEL?
Message was edited by:
[email protected]

I'll say it again in case you missed it the first time: V$ views are NOT part of the data dictionary. You can't read the data dictionary until the database is opened.
If you've performed a recovery 'until cancel', your datafiles are all in synch with each other. They may even agree with checkpoint change number in the controlfile. But what about your redo logs? By definition, they will have changes in them from a time after the point in the redo stream you got to when you said 'cancel'.
Therefore, the redo logs will be ahead of where the rest of the database has now gotten to.
And that is why you HAVE to open the database with a resetlogs operation (that is, 'alter database open resetlogs;'). That causes the existing redo logs to be wiped clean and thus cleared of any redo from a time after the time the rest of your database has been recovered to.

550 Requested action not taken : mailbox unavailable

would you like to help me to solve my problem? i receive bounce back email like this :
From: Mail Delivery System [mailto:[email protected]]
Sent: Monday, November 03, 2014 2:57 PM
To: [email protected]
Subject: Mail delivery failed: returning message to sender
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
   [email protected]
    SMTP error from remote mail server after RCPT TO:<[email protected]>:
    host mx2.hotmail.com [65.55.92.184]: 550 Requested action not taken:
    mailbox unavailable
------ This is a copy of the message, including all the headers. ------

Hi Ristake,
I got the same NDR as yours when I sent to
[email protected] .
Please check whether the recipient is valid and his mailbox is available.
Thanks

Requested action not taken: message refused

Hello,
I get the following error message:
ibs-mail.domain.local #5.7.1 smtp;550 5.7.1 Requested action not taken: message refused
where i can send out emails, but not recieve.
Any help is truly appreciated
K Amro

5.7.1 is a standard SMTP error code for an unauthorized delivery. I suspect you either have a filter that is blocking too much mail, or you may have an account problem with your BIS account and need to contact your carrier.
posted by DigitalFrog
WARNING: May contain traces of nuts.

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

Yikesyou have helped me before and I thank you for that. Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days. I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that. I still have remnants of catalogues etc so I am never quite sure where I am. I ran a search and found more than one .lrdata files. I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne

Requested action not taken: message refused (in reply to end of DATA comman

Hello!
When trying to send an email to one particular domain (that I know of) the email is being rejected from the recipient mail server and my mail logs are showing this error:
said: 550 5.7.1 Requested action not taken: message refused (in reply to end of DATA command))
Can anyone tell me where to start looking?
(I have full logs of the postifx transaction within my mail server).
regan.

There's a myriad of reasons why the remote mail server may refuse your message. Since it's happening so quickly I'd bet on incorrect reverse DNS for your server, but it could also be an number of anti-spam filters that are running.
Do you have valid, working DNS for your server? in other words if you lookup your server's public IP address do you get the same hostname that the server thinks it is?
For example:
Good: nslookup mail.domain.com -> 12.34.56.78; nslookup 12.34.56.78 -> mail.domain.com
Bad: nslookup mail.domain.com -> 12.34.56.78; nslookup 12.34.56.78 -> some.hostname.your.isp.net
The latter is almost guaranteed to get your mail blocked at most of the big ISPs.

What action shouldbe taken

Similar Messages

Maybe you are looking for