What are difficulty between oc4j included Jdeveloper and oc4j extended?

Hi all!
I don't know why i deploy application on oc4j included Jdeveloper when it's run ok but i deploy on Oc4j extented when it's run not ok.
I want to know the difficulty between oc4j included Jdeveloper and oc4j extended? How to config oc4j extented?
i've tried deploy appliction on oc4j extended. i get this error:
JNLPException[category: Download Error : Exception: java.io.IOException: HTTP response 404 : LaunchDesc: null ]
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getDownloadSize(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
thank a lot!

The main difference is the version of OC4J. They do not often match. If the extended OC4J is a later version than the one packaged in JDeveloper, then applications developed in JDeveloper are not guaranteed to work in extended OC4J. It is always recommended
to develop and test against the OC4J in JDeveloper.
If you are using JDeveloper 10.1.2 make sure to use the right admin.jar (always point the path to the one in OC4J install ) in your OC4J connection.
In future release Oracle is trying to address such problems by allowing user to configure JDeveloper against a particular version of OC4J.

Similar Messages

What are differences between the target tablespace and the source tablespac

The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
Why create so many errors?
How to avoid these errors?
What are differences between the target tablespace and the source tablespace?
Is this datapump action really successfull?
Thw following is the log output:
[oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
. . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
. . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
. . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
. . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
. . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
. . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
. . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
. . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
. . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
Processing object type TABLE_EXPORT/TABLE/COMMENT
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/TRIGGER
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
Justin

What is difference between Oracle Application Server and OC4J

Thanks in advance
Regards
Sunil

OC4J is only the Oracle Container for Java, using a inner HTTP Server.
Oracle Application Server, the components depend of the installation type.
Components
1. OC4J : Oracle container for Java ... without inner HTTP Server, this component use Apache to presentation tier.
2. OC4J_SECURITY (SSO) : Single SingOn
3. Forms and Report Server, Wireless ....
4. Apache : Presentation Tier (use .so or .dll) for OC4J
All the components of this suite are controlled by the OPMN (This component is installed in the OC4J).
OPMN : Oracle Process Manager to control all the components.

What are different between software VM-FEX and hardware VM-FEX?

Hi everybody,
I am confuse software VM-FEX and hardware VM-FEX.
Does the software VM-FEX is Emulated mode and hardware VM-FEX is VMdirectpath mode?
If i design a VM-FEX, is there must have nexus 1000V or not ?
Is Nexus 1000V and VM-FEX must work together or select one of them?

Have a look at http://keepingitclassless.net/2013/06/cisco-vm-fex-and-the-nexus-1000v/
VM-FEX in hardware requires on the host side a VIC adaptor, and a UCS FI or N5k as a switch (and control plane)
VM-FEX in hardware has 2 submodes (PTS = Emulated Mode) and UPS (path Through)
VM-FEX makes use of the VEM module (same as N1K; it is operated in a different mode however)
VEM can do N1k local switching or VM-FEX path through, but not both !

What are different between gateway and mangement server in scom ?

Hi all,
can anyone let me know What are different between gateway and mangement server in scom ?
thanks,
Sengottuvel M

Hi,
Hope this can answer you question
About Gateway Servers in Operations Manager
http://technet.microsoft.com/en-us/library/hh212823.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

What are differences between Java and C#

What are differences between Java and C#?
I was looking at C# and it looks very similar to java, does anyone have any input on what the primary differences are?

C# has ventricles, being a more modern, hip,and
stylin language.Yeah, but it can't use them properly unless youbolt
on an after-market turbo charger and paint some
go-faster stripes.
Java doesn't need ventricles, as the language is
built as a bifurcative scrobbidibbit from theground
up.
And here I thought you were smart.The ventricles add power on the backswing and keep
down the humpty-B count, and those stripes don't
really do much except to impress the PHBs. A
ventricle here and there wouldn't do Java anyharm.
Oh, I see.
I didn't realize you were concerned with humpty-B. So
I suppose you put 17 firewalls in front of your VM's
Jeffries tubes too huh? And measure productivity in
fleems per wonkle?
That may have worked back when you carved FORTRAN on
stone tablets, and then went to look for a nice young
lady to club and take home. But modern software
development techniques demand a focus on the
regressive thromboid paradigm, and ventricles only
get in the way when you're trying to calibrate that
against the latest fractal suppository data.At least I have actual experience in carving FORTRAN on stone tablets, so I know what I'm talking about. (The clubbing was the other way around but that's neither here nor there.) As for your regressive thromboid paradigm, regressive is exactly what it is. Progressive paradigms, whether thromboid or rhomboid, require ventriculation to achieve their maximum potential.
And I suppose if you're still using those Jeffries tubes in your VM, it's not surprising that it's humptied to the max. Try installing Apache Fallopian if you really want to dehumptify it, or Apache Eustachian for 64-bit VMs.

What is difference between 4.6c version and 4.7ee version

Hello to all,
Pls, help me.
what is difference between 4.6c version and 4.7ee version?
It is urgent tommorow I have an interview.
thanks & regards,
raju.

Hi
Check these links
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
One major difference is that 4.6 runs on what they call the basis layer, in 4.7 the basis layer was majorly modified to include new web technologies, hence the renaming of Basis to Web Application Server. 4.7 runs on the Web Application Server 6.20. With this, was the introduction to BSPs or Business Server Pages.
Also have a look at the link:
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Here is a quick short list though:- Statements for character processing have additions IN BYTE MODE and IN CHARACTER MODE, this affects statements like DESCRIBE LENGTH, OPEN DATASET
Header lines should not longer be used for tables (in OO context this is not even possible)
TABLES statement in reports should no longer be used
PNPCE for concurrent employement (new logical DB for HR)
For OO abap there a plenty of short forms for method calls that were not previously available.
One very cool feature is that data reference's can have actual data types and van be referenced directly without field symbols.
Additions to many abap statements, for example there is now a ALL OCCURENCES addition to the replace statement.
Class based exceptions are now available (although it is debatable how usefull these are seeing as there is no FINALLY part to the try catch statement, very disappointing but maybe that is just me).
Friends have been introduced for OO abap.
Dynamic program has plenty of improvements, for example there is now a TYPE TABLE OF variant for create data which lets you dynamically create an internal table with a structure type, your can also now call a class constructor with different importing parameters dynamically.
Regards
Kiran

Whats the difference between an iPhone 5s and a iPhone 5c

Whats the difference between the iphone 5s and the iphone 5c???

Rider11 wrote:
The 5c has plastic backs with different colors just for fun other then that nothing is different.
You'd better look up the above linked comparison as well if you believe you are correct....

What are differences between nokia N95 8gb new upd...

what are differences between nokia N95 8gb new update V20 and previous update V15 and what are the bugs in new update V20??

Does your search not work?
/discussions/board/message?board.id=swupdate&thread.id=31380

What are the advantages of using CACHE and NOCACHE Hint

What are the advantages of using CACHE and NOCACHE Hint & difference of them.I saw one of oracle.sql script have CACHE & oracle rac script include NOCACHE .Why is that

924250 wrote:
In a SOA product include db scripts,when we install the product we want to execute the db script to create sequence both oracle RAC & Oracle db
Oracle DB
CREATE SEQUENCE REG_LOG_SEQUENCE START WITH 1 INCREMENT BY 1 NOCACHE
Oracle RAC DB
CREATE SEQUENCE REG_LOG_SEQUENCE START WITH 1 INCREMENT BY 1 CACHE 20 ORDERas sb mentioned, this has nothing to do with oracle hints.
you'll want to search the documentation about sequences.

What is difference between 4.7c BW and R/3 s/w

what is difference between 4.7c BW and R/3 s/w

Please refer
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
Please check the below link for the differences between the two releases..
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Select the source and target versions of release and the solution area and the module...you will get the list of all the differences.
I hope it will reach your req.
Regards
Chandra

What are function modules used in alv,and its explanation

what are function modules used in alv,and its explanation

hi..
The important function modules are
Reuse_alv_fieldcatalog_merge
Reuse_alv_list_display
Reuse_alv_events_get
Reuse_alv_grid_display
Reuse_alv_commentary_write.
REUSE_ALV_FIELDCATALOG_MERGE
 This function module is used to populate a field catalog which is essential to display the data in ALV.
 If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter (I_structure_name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
Note : Fieldcatalog can be filled manually also by filling up all the required details into the internal table
The important parameters are:
 1. Export:
 a. I_program_name : report id
 b. I_internal_tabname : the internal output table
 c. I_inclname : include or the report name where all
 the dynamic forms are handled.
 2. Changing
 ct_fieldcat : an internal table with the type
 SLIS_T_FIELDCAT_ALV which is declared in the
 type pool SLIS.
REUSE_ALV_LIST_DISPLAY
This is the function module which prints the data.
The important parameters are:
1. Export:
 I_callback_program : report id
 I_bypassing_buffer : X
 I_buffer_active :
 I_callback_pf_status_set : routine where a user can set
 his own pf status or change the
 functionality of the existing pf status.
 I_callback_user_command : routine where the function codes are
 handled.
 I_structure name : name of the dictionary table
 Is_Layout : structure to set the layout of the report
 It_fieldcat : internal table with the list of all fields and their
 attributes which are to be printed (this table
 can be populated automatically by the function
 REUSE_ALV_FIELDCATALOG_MERGE
 It_events : internal table with a list of all possible events
 of ALV and their corresponding form names.
2. Tables:
 a. t_outtab : internal table with the data to be output
REUSE_ALV_EVENTS_GET: 
 Returns table of possible events for a a list type
1. Import:
 Et_Events :
 The event table is returned with all possible CALLBACK events for the specified list type (column NAME). For events to be processed by the Callback, their FORM field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field FORM filled and the entry modified using constants from the type pool SLIS.
2. Export:
 I_list_type:
 0 = simple list REUSE_ALV_LIST_DISPLAY
 1 = hierarchical-sequential list
 REUSE_ALV_HIERSEQ_LIST_DISPLAY
 2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
 3 = hierarchical-sequential block list
 REUSE_ALV_BLOCK_LIST_HS_APPEND
REUSE_ALV_GRID_DISPLAY
A new function from 4.6 version, to display the results in grid rather than a
preview.
Parameters : same as reuse_alv_list_display
REUSE_ALV_COMMENTARY_WRITE
This is used in the Top-of-page event to print the headings and other
comments for the list.
It_list_commentary : Internal table with the headings of the type
 slis_t_listheader.
 This internal table has three fields:
 Typ : H - header, S - selection, A - action
 Key : only when typ is S.
 Info : the text to be printed
plz reward pts if helpful.
regards
vijay.

What is difference between G50-70 442243 and G50-80 80L0006CIN?

What is difference between G50-70 442243 and G50-80 80L0006CIN? Both listed same specification. and same price tag. I am planning to purchange one but which one is better?

There are 2 RAM slot in this laptop model. You can extend RAM upto 16 GB.

What are differences between IDES Solution?

Hello Guru,
Could you tell me what are differences between IDES Solution as detail below?
I try to find a documentation but I can not found them in info page.
I would like to install IDES ECC6. Which is IDES Solution I should to download.
You can go to the path: Installations and Upgrades -> SAP Application Components -> IDES SOLUTIONS
IDES SOLUTIONS
IDES EA-DFPS 6.03
IDES IS-CWM 6.03
IDES IS-PS-CA 600
IDES OIL-600
IDES RETAIL-600
IDES SEM-BW 6.0/7.00
Thank you very much.
Regards,
Thanarat T.

Hi,
Firstly, IS is meant for Industry Solutions which means the SAP Components are specifically developed for respective Industries, for example: IS-OIL, IS-MINING, IS-RETAIL, IS-SEM, is for Oil basin companies [Industries], Mining companies, Retail Industries, and SEM for Strategic Enterprise Management respectively.
So, the SAP Components which are required for CLIENT IMPLEMENTATION those can be dowloaded or purchased from SAP Service Market Place.
I hope you understand the scenario.
Regards,
prabhu kishore reddy.

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

What are difficulty between oc4j included Jdeveloper and oc4j extended?

Similar Messages

Maybe you are looking for