What are steps followed in aggregation level in multiprovider

what are steps followed in aggregation level in multiprovider

I am kind of new too. But this site helped me to understand and deploy the example in weblogic.
Hope it helps you.
http://e-docs.bea.com/wls/docs81/webserv/example.html#1052582

Similar Messages

How to create queries on multiproviders& what are steps to be taken.

Hi all,
How to create queries on multiproviders& what are steps has to be take care.
Thanks,
cheta.

Hi,
Following scenario for sample for slow moving items for multiproviders.
Slow Moving Item Scenario
You want to define a query that displays all products that have been purchased only
infrequently or not at all. In other words, the query is also display characteristic values for
which no transaction data or only low values exist for the selected period.
Procedure
In the Administrator Workbench;
1. Create a MultiProvider consisting of a revenue InfoCube, containing the InfoObject
Material (0MATERIAL), and the InfoObject 0MATERIAL. The InfoObject must be set as
an InfoProvider in InfoObject maintenance. In other words, you need to have assigned
the InfoObject to an InfoArea. (also refer to Tab Page: Master Data/texts [Ext.]).
In the BEx Analyzer:
2. Select your MultiProvider in the Query Designer.
3. Define a query that contains the InfoObject 1ROWCOUNT in the columns.
The InfoObject 1ROWCOUNT is contained in all flat InfoProviders, that is, in all
InfoObjects and ODS objects. It counts the number of records in the InfoProvider.
In this scenario, you can see from the row number display whether or nor values
from the InfoProvider InfoObject are really displayed.
4. Save the query and execute it. All values are now displayed, including those for materials
that were not purchased.
If you filter by time (0CALYEAR, for example), values from the InfoProvider
InfoObjects are not displayed since 0CALYEAR is not an attribute of
0MATERIAL. You can see this from the absence of values in the 1ROWCOUNT
column in the query. If you want to restrict by time, you need to proceed as
follows:
Constant Selection for the InfoObject
You need to set the constant selection for the 1ROWCOUNT key figure in order to be able to
set a filter by time in this query.
1. In the Query Designer, via the context menu for 1ROWCOUNT, choose Edit.
2. On the left hand half of the screen, under the data package dimension, select the
characteristic InfoProvider (0INFOPROV) and drag it into the right-hand screen area.
3. From the context menu for the InfoProvider, choose Restrict, and restrict across the
InfoProvider InfoObject.
4. Also from the context menu for the InfoProvider, choose the function Constant Selection.
5. Save the query and execute it. You can now also set a filter for a time characteristic, the
materials display remains as it was.
Displaying Slow Moving Items
If you want to display a list of slow moving items, excluding products that are selling well, you
need to proceed as follows:
1. In the Query Designer, via the context menu for 1ROWCOUNT, choose Edit.
2. Via the context menu for InfoProvider, choose the function Display Empty Values. Also
select Constant Selection.
3. Save the query and execute it. The result is that the system displays the materials for
which there was no revenue.
Displaying Products with Small Revenues
If you want to display a list of products that have not been sold or have only been selling
badly, you need to proceed as follows:
1. Set constant selection as described above, but do not select the display empty values
function.
2. In the Query Designer, define a condition for the 0MATERIAL InfoObject. Specify a value
that is to be the upper limit for a bad sale.
3. Save the query and execute it. The result is that the system displays all materials that
have not been sold or have been selling badly.
Thanks,
Sankar M

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

DHCP Option 60: Go HERE.

What are the components & support package levels required in 4.7 to extract

Hi All,
In my landscape we have ECC 6.0 and 4.7EE, as of now we are extracting data from ECC 6.0 to BI 7.0.Now we have requirement to extract data from 4.7EE.
Could you please suggest me what are the components & support package levels required in 4.7 to extract data from BI 7.0
i am copying current compnents and support package level below
SAP_BASIS            620        | 0065 | SAPKB62065           | SAP Basis Component                                         |
SAP_ABA              620        | 0065 | SAPKA62065           | Cross-Application Component                                 |
SAP_APPL             470        | 0025 | SAPKH47025           | Logistics and Accounting                                    |
SAP_HR                 470        | 0113 | SAPKE470B3           | Human Resources
ABA_PLUS            | 100        | 0009 | SAPKGPBA09           | PLUGIN ZU ABA_PLUS                                          |
EA-IPPE                  200        | 0013 | SAPKGPIB13           | EA-IPPE 200 : Add-On Installation                           |
PI                   | 2004_1_470 | 0001 | SAPKIPZI51           | R/3 Plug-In (PI) 2004.1 for R/3 Enterpri                    |
PI_BASIS             | 2004_1_620 | 0003 | SAPKIPYI53           | Basis Plug-In (PI_BASIS) 2004_1_620                         |
ST-PI                | 2008_1_620 | 0000 |      -               | SAP Solution Tools Plug-In                                  |
EA-APPL              | 200        | 0007 | SAPKGPAB07           | SAP R/3 Enterprise PLM, SCM, Financials                     |
EA-DFPS              | 200        | 0007 | SAPKGPDB07           | SAP R/3 ENTERPRISE DFPS                                     |
EA-FINSERV           | 200        | 0007 | SAPKGPFB07           | SAP R/3 Enterprise Financial Services                       |
EA-GLTRADE           | 200        | 0007 | SAPKGPGB07           | SAP R/3 Enterprise Global Trade                             |
EA-HR                | 200        | 0011 | SAPKGPHB11           | SAP R/3 Enterprise HR Extension                             |
EA-PS                | 200        | 0007 | SAPKGPPB07           | SAP R/3 Enterprise Public Services                          |
EA-RETAIL            | 200        | 0007 | SAPKGPRB07           | SAP R/3 Enterprise Retail
Thanks & regards
Mani.
Edited by: manohar kumar on Nov 18, 2010 7:36 AM

Hi,
As far as my view there is no such dependancy as our customers are running in same Environemnt (R/3 4.7 EE and BI 7.0) .
Are you facing any problem durng extraction or its just a proactive approarch .
I hope extraction will work with your current landscape.
Regards,

What are the following entries doing in the following configuration file?

What are the following entries doing in the following configuration file?
Thank you
<include>coherence-pof-config.xml</include>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>

<include>coherence-pof-config.xml</include>

<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>

<allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
<allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
<user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
<include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
http://wiki.tangosol.com/display/COH35UG/user-type-list
http://wiki.tangosol.com/display/COH35UG/pof-config
Thanks,
Everett Williams
Coherence Team

What are the following script doing?

What are the following script doing? What does symbol *<* stand for?
protected Map<Member, List<String>> divideWork(Set members, List<String>
fileNames)
Thank you

su_penguin wrote:
Side note: http://en.wikipedia.org/wiki/Operator_overloading
Extra credit: What trick does Java's syntax use to allow Generics to compile with or without whitespace between the angle brackets? Ex: Map< Member, List< String > >
Why doesn't it work in C++?Does this have something to do with the comment "Note that it is not an LL(1) grammar"? [http://java.sun.com/docs/books/jls/third_edition/html/syntax.html]

HT204382 I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?

A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan

What are steps to take music from ipad itunes and add to ipod nano?

what are steps to take music from ipad itunes and add to ipod nano?

You will need to transfer any music that you have purchased on the iPad directly from the iTunes Store app to the iTunes app on the computer to which you sync the iPod. You can do that by directly downloading the media from Apple to the computer's iTunes app or by connecting the iPad to the computer and before syncing the iPad transferring purchases that you have made to the computer's iTunes media library. One place that you will find that command is in the iTunes app's File menu.

What are the following Fields meant to contain...?

What info are the following Fields in iTunes meant to contain?
'Comments', 'Description', 'Category', 'Grouping'?
Thanks.

They're not meant to contain anything, so they may be blank. However, those fields are there for various purposes. For example, pick any song or Podcast in your Library:
Comments: this field can have a note about the song, Podcast etc. etc. Amazon use the Comments field to make a note of the Amazon ID they assign a song when they sell it to you. You can edit the Comments field if you wish, adding any note that you want, for your own purposes.
Description: is used by Podcasters. They enter a description of their Podcast, typically a little information about that particular show. This field for a song etc, can be found (and edited) on the Videos tab of the song, (even if it's not a video!). Not all Podcasters make use of this field and not usually used in songs.
Category: Used by iTunes Radio services, to identify the type of programming they offer. Also used by Podcasters. Not always used by either service and not usually used in songs.
Grouping: Ah! Now, this is a good and useful field. Suppose you want a song to be in two different genres. Well, that cannot be done. However, if you want one song with genre "Rock" to also be included with all your "70's Pop" genre, simply type Rock into the grouping field and then create a Smart Playlist which has the rules: Genre is 70's Pop and Grouping is Rock. This Smart Playlist will have all the "70's Pop" genre in it and any song that you have typed "Rock" into the Grouping field. It will not have any of the other Rock genre in the list.
Actually, a Smart Playlist can make use of any of the fields you have mentioned. So it's possible to create a Smart Playlist that picks out any song or Podcast etc. containing a particular word in the Description field and a different word in the Comments field.

What are steps to upgrade old BC site to new BC site"

I have an existing clint BC site in the system and we have built a new site also in BC and now need to make the change so new one is live and old one goes away. URL will remain same. What are the steps in doing this?
Thanks
H~

HI Henry,
These would be the steps:
- Upgrade the new site
- remove the domain from the old site and add it to the new site
- cancel the old site
Cheers,
-mario

What are steps for transitioning from my current CC team account to new CC individual account?

Hi, I can not find any info to this question. I currently have a team (company) membership that is to expire soon. I will be getting a new CC individual (educational) licence then. What are the steps to install this new license onto my computers? I can not seem to find this info anywhere. Thanks!

CN1982 wrote:
Hello myFico subscribers, How can I improve my current scores? 1-Unsecured CapOne platinum CC $1200, 1-CapOne QuickSilver Secure CC $15001- FingerHut-$500, Victoria Secret- $300. How do I use the CC for me to see the benefits from usagae. Am I suppose to use less than 15% and pay it down before the statement is generated? Or, the CC needs to report a small balance each month. Current scores: July 7, 2015EQ: 622, TU: 659, EX:637I would also ask how long you have had each card? I would also suggest making a small purchase with the cards pretty much every month or at least every other month to show that you are 'interested' in their cards. And of course, keeping an eye towards getting the QuickSilver to be unsecured, and if you use it for expenses, it should be that way in time. For the unsecured cards, you could check to see if they have a CLI request button online, or maybe a chat option to ask for an increase. I believe Cap1 is once every 6 months. I do not have any experience or knowledge about asking for a CLI on a secured card, not sure if that's possible or not. Other than that, keep everything paid on time and your scores will rise over time, as mentioned. hth ETA: The benefit to getting larger CLIs is that it will help your utilization and that as you get larger CLIs, it will promote or suggest that other CCCs also offer you a larger CLI or in the case of a new card, a larger SL. It will also happen as your scores increase. Also, Jackielee explained everything very well and I didnt mean to overwrite anything, just to supplement it.

Aggregation Level on Multiprovider

Hi All,
I have a planning function on aggregation level built on multiprovider.
When I try to Execute the planning function,the report is throwing an error as below-
*InfoProvider YF2_OTIFA is being used in manual planning or in a planning function. YF2_OTIFA is a MultiProvider or an aggregation level based on a MultiProvider. You are trying to create a data record for InfoProvider YF2MM_C1 but this InfoProvider is not contained in the MultiProvider.
System Response
The data record is invalid.
Procedure
Correct the entries in manual planning or check the parameterization of the planning function.*
Any Inputs?
regards,
Rajendra

Hi Einstein,
Thanks for your valuable answer.
And sorry for delayed responce.
Yes you are right.I am using Web as front end and using data binding with query results.
Can you pls elaborate what you mean by use Infoprovider as a condition in the planning function
regards,
Rajendra
Edited by: Rajendra.Vmath on Jun 1, 2009 8:07 AM

Aggregation Level Vs Multiprovider

Hi Folks,
Can some one can explain me what makes to use Aggregation Levels as we have an option of building Read Input Queries on Multiprovider it self?
Is it a mere performance issue or else thats the only way we need to go build a Input Query.
Also can some one tell me how I should final Layout after I have designed a RI Query in Bex Designer. So far my understanding is to Execute that Query
1. Bex Analyzer or else
2. Go and hook this query by using WAD.
What difference that really makes me in terms of functionalities between both layouts except for the Visual Feel might be different one in Excel and other on Web. Any major bottle necks here?
I really appreciate any kind inputs here for my above concerns.
Points will be assigned.
Thanks in advance for every input on this.
BI-IP Guest

Ravi/Manyak,
Thanks for your responses. I appreciate that and I understand that we cant build Input Ready Queries on regular Multiprovider.
How to decide like whether we should go with Multiprovider or Aggr Level for building my Ready Input Queries.
Ravi saying that it's when we want to do manipulations or else while using Planning Functions.
I find BPS more easy to understand when seen with IP especially when I built Lay outs. Atleast in BPS we can feel on what we are building. But here in IP Iam getting Confused on how to build Rolling Forecast Layouts and also using Aggregate Levels/ Multiproviders. Iam saying this in general what my situaion is.
Any comments for Knowledge Transfer will be highly appreciated.
Thanks,
BI-IP Guest

Unable to create Aggregation level on Multiprovider

Hello Experts,
I am getting the following error when activating a newly created aggregation level on a certain Multiprovider.
Error : Aggregation level B2MP01L02: InfoProvider 0COMP_CODE cannot be used for definition.
0comp_code is a characteristic that I have included in a dimension of the Multiprovider. In the same dimension, i have another characteristic opcomp_code whose reference characteristic is also 0comp_code.
Could this be the source of the error? There are already many queries built on the Multiprovider, I am reluctant in deleting opcomp_code and check the impact while activating the Agg level.
Has anyone encountered this issue?
Any help will be greatly appreciated.
Thanks,
Nitish.

Hi Nitisch,
it seems that you get message RSPLS192, cf. long text of the message.
Not all multiproviders can be used as a basis for an aggregation level. The multiprovider has to contain at least one real-time InfoCube and not aggregation levels (aggregation levels cannot be nested).
Regards,
Gregor

Input-ready query and aggregation level or multiprovider

Hi,
is it true that input-ready querys can only be created based on an aggregation level and not a multiprovider?
thanks.
regards
P.Rex

Hi,
Input Ready Queries can only be built on aggregation levels.
If you want to create an input ready query on a multiprovider, first create an aggreagtion level on top of this multiprovider and build your query on this aggregation level.
If you have any problems in getting the input readiness, you can always revert.
Regards,
Srinivas kamireddy.

What are steps followed in aggregation level in multiprovider

Similar Messages

Maybe you are looking for