What are the reporting options

hi
what are the reporting options

Hi,
in addition to the report XXX we can add
i)No standard page heading.
ii)message class name
iii) line size
iv)line count
for eg:
REPORT  ZXXXXXX no standard page heading message-id zXXX line-size 124 line-count 100.
regards,
vineela

Similar Messages

  • What are the reporting performances can we do?

    What are the reporting performances can we do?

    Hi,
    General tips
    Using aggregates and compression.
    Using  less and complex cell definitions if possible.
    1. Avoid using too many nav. attr
    2. Avoid RKF and CKF
    3. Many chars in row.
    By using T-codes ST03 or ST03N
    Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
    Try table rsddstats to get the statistics
    Using cache memoery will decrease the loading time of the report.
    Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
    Also try
    1.  Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
    2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
    Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
    It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
    3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
    Open the Aggregates...and observe VALUATION and USAGE columns.
    "---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
    if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
    In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
    In usage column,we will come to know how far the aggregate has been used in query.
    Thus we can check the performance of the aggregate.
    Refer.
    http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
    Note 356732 - Performance Tuning for Queries with Aggregates
    Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
    4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
    Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
    Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
    http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
    /people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
    Generate Report in RSRT  
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
    Achieving BI Query Performance Building Business Intelligence
    http://www.dmreview.com/issues/20051001/1038109-1.html
    Business Intelligence Journal Improving Query Performance in Data Warehouses
    http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
    Achieving BI Query Performance Building Business Intelligence
    http://www.dmreview.com/issues/20051001/1038109-1.html
    Hope this helps.
    Thanks,
    JituK

  • What are the reporting changes in BI 7.0 and sap 3.5

    Hi,
    what are the reporting changes in BI 7.0 and sap 3.5.
    can anybody know the other name of BI 7.0.
    what are the min,max no of load times.
    what is the load timings if the onsite office is at USA.
    Thanks & Regards,
    cheta.

    Hi Cheta,
    New Features in BI:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
    /people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
    BI 7.0 reporting features
    http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
    http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
    Some features of BI 7 are
    1. In Infosets now you can include Infocubes as well.
    2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
    3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
    4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
    5. Search functionality hass improved!! You can search any object. Not like 3.5
    6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
    check these link's
    http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
    In this one - check out slides 28-34
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
    Check this link to get PDF doc on SAP BI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
    Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
    http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
    check the presentaion
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
    http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
    http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
    Web Blogs & Threads in SDN
    /message/502929#502929 [original link is broken]
    /people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
    Refer these links
    There is lot of Info Reg BI7.0 including Reporting also.
    Regards
    Karthik

  • What are the report-relevant settings in the hierarchy maintenance?

    What are the report-relevant settings in the hierarchy maintenance?

    Hi,
    See these links.
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
    assign points if this helps.
    Thanks.....................
    vasu...................

  • What are the proposal options available?

    What are the proposal options available?

    Hi,
    please use meaningful subjects as well as  well explained questions. See also the rules of engagement.
    kind regards
    Siggi

  • What are the Reports are Avialable for Kuwait Localisation ..

    Hello sir,
    We are Implementing HRMS with the Version of 12i for the Kuwait localisation, I am wondering that what are the Reports are available in the Kuwait Localisation. pls help me on this ...
    with regards
    User600722

    Refer to Note: 231369.1 - Oracle HRMS Reports (HTML listing)
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=231369.1

  • What are the reports we can get from OPM Quality

    Dear All,
    What are the reports we can get it from OPM Quality module.
    I am unable to get any reports abouts Tests, Samples specifications.
    Can someone please suggest me.
    Regards,
    Jon

    Pl post details of EBS version.
    If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
    The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
    HTH
    Srini

  • What are the two options of entering PLAN DATA?

    Dear SAP Gurus
    What are the two options of entering PLAN DATA?
    AA

    Dear Friend AA
    Such two options are :- FORM BASED ENTRY & FREE ENTRY.
    FORM BASED ENTRY-Here you fill in th eplan data in the rows corresponding to the characteristic values displayed on the screen.But in free entry you have the freedom of inputting even the chrcteristic values.
    Regards
    Vivek

  • What are the best options for running windows on a Mac Pro

    what are the best options for running windows on a Mac Pro

    For gaming and other CPU intensive stuff: Boot Camp – https://www.apple.com/support/bootcamp/
    For the rest: any virtualization software (Parallels/Vmware Fusion/VirtualBox)

  • What are the best options to replace the SSRS parameter panel?

    Hello.
    One of the biggest weakness of Reporting Services is definitely the fact that we can't design ourselves panel parameter.
    Indeed, This one is totally generated by SSRS and cannot be changed. Moreover its design and features are very limited. This weakness is a regular problem for me in my work, when I integrate reports into a web site, for example.
    So, we are using some workarounds, such as using the ReportViewer object and fully develop report parameters ourselves in our website. But this is problematic because it must be repeated for each report, this is time consuming and the code behind must query
    the OLAP Cube directly to fill the parameters values.
    I have seen other solutions like to rewrite the CSS ReportViewer. But again, this is problematic because this change will apply to all the reports deployed on the server.
    So, what solution you use? Have you found a magic answer? Or you let the default design?

    hello,
    Base on my experience,you may only use azure VM to host your project in your scenarios . Because your website and rest service used different program language.
    In your scenarios , you could create Sql Azure database to store data and create VM to host web service and website.About how to host website on azure VM, I suggest you could refer to same thread (http://stackoverflow.com/questions/20034341/hosting-an-mvc-web-application-in-a-windows-azure-virtual-machine
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What are the kernel option required for udev in 2.6.28 kernel

    Hi All,
    I just want to know the exact options that we need to enable in the
    kernel configuration for the latest udev. Some options specified in
    http://webpages.charter.net/decibelshel … rimer.html is
    not available ( or changed position ) in the 2.6.28 kernel.
    I know that copying the existing config file from linux distro will do
    it. But want to know about the exact kenel modules/support needed for
    udev to get everything working. Please help.

    B wrote:
    OK I was definitely not qualified to answer that question .
    May I ask what you are trying to do exactly?
    If you are rebuilding your own kernel you might as well check the documentation in the kernel building utilities (gconfig, qconfig, xconfig, ...). Granted, it takes longer, but you get to know your way around. Also, I don't think those options are specific to 2.6.28 either - it would surprise me if they get altered so frequently you'd need to inquire about a specific kernel version.
    I am using the kernel 2.6.28. Thats why I specified the kernel version as 2.6.28. Yes, those options are generic to latest version of 2.6 kernel. But things were changed from 2.6.13 kernel and again as per the comment from kay sievers, it again going to change in next version.
    Yeah, SIGNALFD only in the next, the to be released version
    http://www.spinics.net/lists/hotplug/msg02162.html
    I am just searching to find out the kernel configuration options to get the udev working. The udev primer is for 2.6.13 and I know there are lots of changes in newer version of kernel/udev. I know how to build kernel and I like menuconfig than the GUI utilities.
    Thanks for all the answers/comments.

  • Selling a 'Collection' or 'Series' of Folios, not a subscription -- What are the Buying Options

    We have a collection of how-to books with illustrations and interactive features we want to publish using our Pro account. Each book is set up as a folio. The books are related to each other and are used as a resource set from the app. We want to offer a multi-folio app with the core of several folios loaded in advance, and then let each customer buy additional folios if they are needed or when they become available.
    -- Can we set up a multi-folio viewer app library to display only those folios that have been purchased? We would rather not have the library cluttered up with new folios with buy buttons that the customer might not want. We could put out a sample of each additional folio but we’d like the buy option to the full edition handled in a more discreet way.
    -- All marketing and sales will be from our website sending people to the Apple and Android app stores so we are not that concerned about sales initiated from the app. In most cases the day-to-day user/reader is not the purchaser or decision maker about the additional folios..
    -- Can we disable the archive button or have it bring up a dialog box with some options? I have read others have a problem with this also.
    Any suggestions?

    I would say you need a custom entitlement server that connects to your user database. We can set it up for you.
    When Adobe allows customizing the library you can probably remove the Archive button as well.
    Best,
    Tristan

  • What are the assessment options in Captivate 8 for the following scenario:

    I have one Captivate  project with five modules, after each module I want to have mandatory questions (user need to answer to proceed and pass the course) and optional questions (user can skip, not included in the final score). I am using Oracle LMS. it seams Adobe didn't change the limited quiz preferences in Captivate 8.
    I would like to hear from the experts before I proceed into a lengthy option. I have the option to chop the project into five separete projects with 5 quizes ( with manadatory questions) . then make the optional quiz questons as a sperate projects, and organize them ( learning objects)  in the LMS to play after each module, where the use can skip.

    As Lieve suggests, since you need to score various quizzes separately, you need to have those CP quizzes as separate files...which, again as she states, is a SCORM requirement.
    You could put all those separate CP files together in one package with Captivate's 'Multi-SCO Packager' but in every case I've seen, the LMS breaks those up into separate lessons anyway...so you'll need to use the LMS to open one, go through it, close it, have it scored, open the next through the LMS, etc.
    So the LMS would be the 'Main File' Lieve mentions.
    If you don't NEED to see the individual quiz scores, you could put all sections in one main CP file...then all section quizzes would be scored cumulatively to show one overall score in the LMS...
    ...and if your LMS supports 'interaction data' you could report on the actual answers to each question to find out how well a user did in each quiz section, but that again depends on your LMS capabilities (and that data will meet the requirements).
    Overall though, if you need to see separate quiz scores in the main LMS interface, each quiz has to be its own file. That would be the case with ANY tool you use, being a SCORM limitation.

  • Inbound Logistics:  What are the best options to capture freight costs?

    We attempted to implement a freight payables solution which was built on Inbound Deliveries> Inbound Shipments> Inbound Shipment Cost Documents.  The PO line items were flagged with a conf.control key which made the above inbound documents relevant.
    Very long story short, we had to remove this functionality because of two major issues:
    1.     The Inbound Deliveries were created with incorrect quantities some of the time.  When the Inbound Deliveries were created with incorrect quantity those errors caused major problems (e.g., over accrual of freight cost to the tune of several millions of dollars!!!).
    2.     Also, when the Inbound Deliveries were created with incorrect quantity MRP went berserk (e.g., when the IB delivery has the wrong quantity that shows up in MD04 and the planners are left scratching their heads wondering why the supplier is shipping so much or so little).
    I wonu2019t get into the details of how the Inbound Deliveries were being created but suffice to say they were manually entered by the supplier without the benefit of an EDI transaction- it was more of a manual entry- hence the data accuracy problem.
    The point of this post is to gain feedback from other customers who have implemented an inbound freight payables solution with success & understand what processes were used to make your project successful.
    For example, if I had a u201Cwish listu201D Iu2019d request the following:
    1.     The IB delivery document type Iu2019d like to use should be non-MRP relevant.  This will eliminate the confusion that occurred when planners run MD04 and see all of the shipment notifications.  Also, if the MIGO_GR transaction is used to receive the POu2019s, they will see the quantities on the PO, not on the IB delivery.  This would be good for us from a business continuity stand point.  However, if the IB delivery is not MRP relevant, than your GR does not accrue the freight cost defined on the SCD which short circuits the entire point of having these documents.
    u2022     Q:  Have you had any success implementing an IB freight solution with minimum impact to planning / inventory / operations?
    2.     As mentioned above, the data accuracy of the IB delivery was problematic.  Because of this issue we have changed our thinking so that we would require a EDI ASN to be sent from our supplier to our SAP system.  Using EDI we feel that greater accuracy would be obtained since the quantities defined would map to what is being picked or at least aligned with what we would expect to be invoiced for.  The problem is we donu2019t know how EDI capable our suppliers are.
    u2022     Q:  Has anyone had success implementing this with your suppliers on a large scale?
    3.     Are there other inbound freight payment solutions that Iu2019m not thinking about u2013 custom or other that you have implemented & can share some of the specifics about?  Iu2019d enjoy hearing about them.  Since we are re-thinking what we implemented Iu2019m open to any suggestions. 
    Thanks so much for your time!
    Rich Wortmann

    Chandra,
    Thank you for your reply.  I'm aware of the freight condition approach you suggest & the ability to define the carrier in the freight condition.
    We explored this functionality in the past.  The problem/limitations we've experienced were as follows:
    1. Essentially you have to know your freight cost & the carrier by PO line item at the time the PO is created.  Both of these variables we typically cannot predict in our environment.
    2. We have a lot of situations where the PO is considered a u201Cblanketu201D where it will remain open for a month up to a year.  Knowing the entire freight cost for these PO's once they are created is impossible to predict so to support the freight conditions we would have to change our business process which would be a big effort for our organization.
    3. Our suppliers ship product based on multiple PO's / PO lines, again it is impossible to predict what the per unit freight cost would be at the time a PO is generated.
    These factors are what led us to the IB delivery solution which handles each one of these scenarios quite well provided you have good data when the IB delivery is created.
    Regarding your second post:  Thanks!  This information is helpful.
    Sincerely,
    Rich Wortmann

  • What are the different options for implementing web security?

    Hi,
    Right now I am working on an internet website. We are using JSP for presentation and running Weblogic Application Server. I want to know different options for implementing website security. One of the options that I am aware of is to use LDAP. But we donot want to go and buy a LDAP Directory Server now. So I would really appreciate if somebody could let me know my choices here.
    Thanks in advance.

    Hi,
    If you are working on a Windows 2000 platform, the most obvious choice would be Active Directory Server as this is shipped free with Server 2000. It is LDAP compliant, although does have a few differences that set it apart from the other X500 standard based solutions which I will mention in a moment. Details on these differences can be found at http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnactdir/html/msdn_activedirvsnds.asp
    Other options are openldap, an open source implementation of an ldap server or iPlanet's Directory Server. If you are initially doing an evaluation, a trial version is available of the iPlanet software and can be downloaded from their site. I found this particularly easy to get to grips with and their is excellent documentation available. There is also an offering from Novell, but I have no experience of this.
    Hope this helps.
    Jon

Maybe you are looking for

  • Can i use standard workflow for invoice block ? (BUS2081 . WS20000397)

    Hi Experts , Please any one help me to use the standard workflow for Handlinig invoices blocked(T-code MIRO ).  I want an email sent , when  PO invoice is posted and blocked with attched PDF format . checked Business object BUS2081 . and Workflow WS2

  • After upgrading to snow leopard 10.63

    After upgrading to snow leopard 10.63 Itunes doesn't recognize my iphone or ipad for syncing. 

  • Work around to display large .txt files in Nanos?

    I'd like to read a large .txt file on a Nano...breaking the .txt file into 4k increments isn't feasible. Anyone know how to display a large .txt file on a Nano's screen -- from the Notes folder, or, elsewhere? Thanks!

  • Plant Specific Info record

    I want to create the plant specific info record. For this in the initial screen of ME11, the plant field should be mandatory. In the define screen control for ME11, I made the plant field as required entry, but the system is able to create the info r

  • Facebook crashing on ipad

    Is anyone having prob with Facebook on the ipad crashing