What BI-object must be changable when saving a Broadcasting object ?

HI,
I want to save a Broadcasting-Object (e.g. a query with given variables using e-mail).
Before I can schedule the job, I have to save my settings.Whenever I try this, it's telling me that the system is not changable and I need to open it by using SCC4 or SE06.
It's our Production System, therefore I don't want to open it generally, but I certainly can open the object(s) which would allow me to save my Broadcasting settings..
Would anyone of you know, what I have to open. ?
Thanks

Have you tried changing the BEx Changeability settings for Broadcasting objects in the Transport Connector?
RSA1 -> Transport Connection -> Object Changeability -> BRSE (Broadcast Setting)
If you change this to be changeable you should be able to save new Broadcast Schedules.

Similar Messages

Untagged physical object must be assigned to a tagged parent object   ?

Hi friends ,
I am using Auto-ID Test tool as simulattor of Device Controller . When i tried to trigger Tag commissioning from AII , I have sent the proper informations like GTIN , Device Controller ID , command etc.,
        It is triggering the rule TAGCOM_AA but i was getting the error at the activity POBJ_CREATE as   " Untagged physical object must be assigned to a tagged parent object "
    If i do the tag commissioning via Auto-ID Cockpit it correcly processing and sending the XML message to the appropriate destination .
    Please clarify !
Thanks & regards.,
V.Rangarajan

Hi Michael,
Thank you very much for your valuable answer . But, i stuck up   at the printer assignment .
My question is
1.If Tag commissioning will be taken care by the Device Controller ( Not by AII ) but command has to go from the AII to device controller . If assign the printer to device group then AII will send directly print command to Printer right ?
         Please clarify the Printer assignment steps . I have referred the Slap and Slip configuratuion Guide but still doubt
     1. In Device Master Data Settigns - under Device Group Settings i have done as
AII_DC     WRITE_DEV_GRP     Writer     Fixed Device     Tag Commissioning     Door     WRITE_STATION
    But i have not assigned the Printer , Where to Define this printer is it RFC Destination ? Pls , clarify this point .
   2. If i do that Tag commissioning via Auto ID **** pit AII is sending Print Command Message to the Device Controller (RFC Destination - which is assigned to the Device Controller )
Once agin thanks for the good reply .
Thanks & regards.,
V.Rangarajan

What happened to all the compressors when saving a wav file?

When saving a wav file in Soundbooth CS3 you had your choice of 7 different compressors. In Soundbooth CS4 you can only save a wav file uncompressed. My office has to save wav files using the CCITT u-Law compressor for uploading to Verizon's VoIP system when we create auto-attendant messages.
I could download a program that will save audio files into other formats, including the CCITT u-Law format, but I would prefer to just use Soundbooth and copying the CompilerWave.prm file from CS3 into CS4 doesn't work. Is there any way to get these compressors back without having to use another program?

Hi,
Several of the WAV compressors available in Soundbooth CS3, including the CCITT u-Law, will be available soon. There were some issues with including them in CS4, but those problems have been resolved. I apologize for the inconvenience. On the upside, the codecs are now faster and several bugs were addressed.
I'll post an announcement here when this is available, and I believe it will show up in the Adobe Updater tool.
Durin

What is causing a disk error when saving psd files or writing to cache?

The problem only happens when running Photoshop CC (2104) and Bridge (actually these are the only two programs I really use my external drive for) during a save or write operation to an external hard drive. I can work for hours, with multiple files open, saving, creating, etc. without a problem and then suddenly I'll get a message from Photoshop saying, "Could not save .... because of a disk error." or from Bridge saying, ".. unable to write to cache..".
When I quit and try to troubleshoot the problem, I find that, for some reason, Mavericks has put system files on my external (non boot) drive or, for whatever reason, thinks there is a system file on it. Consequently, the drive cannot be ejected (Error message: "... one or more programs may be using it...") and I cannot repair it using Disk Utility (Error message: " ... live file system repair is not supported"). I also cannot write to it (Error message: "... unexpected disk error has occurred (error code: -50)"). The problem persists even after quitting all other programs, which wouldn't surprise me if Mavericks thinks there is a system file on it.
I have force ejected the drive a couple of times but became concerned that I might be compounding the problem. Now I just restart my computer and run Disk Utility Repair Disk. (Don't know which is worse.) Disk Utility either doesn't find a problem or, if it finds one, it repairs it. After that, Photoshop and Bridge work fine for a while.
System information:
MacBook Pro 13" 2.4GHz with 16GB RAM, 500 GB HD (recently upgraded)
Apple Cinema Display
Mavericks (up to date)
G-Technology G-Drive (Gen 5) 2TB HD connected via Firewire 800 (latest firmware)
Unconfirmed observation: I believe the first few times this problem occurred, Firefox was up an running. I made a point of quitting all programs except System Monitor when running Photoshop and Bridge and I can't remember having the problem again. The the last time the issue occurred, today, however, Safari was up and running.
Is this an OS problem, a hardware (disk drive, cable, etc.) problem, a software problem (PS, Bridge) or some combination? I have put this much detail in the post hoping someone can share some insight into the cause. I will be sending this report to Apple and G-Technology and I will report any resolution, if and, hopefully when, I find one.

The only thing that will cause a disk error is an actual error from the disk.
Photoshop is just telling you what that OS told it about the error.
It sounds like you need to boot off another disk and try to repair your disk.
Also, make sure you have a backup. And check the SMART status to see if it is failing and needs to be replaced.

CrystalReport into Business Objects - Change default name when saving

Hello everyone,
i'm asking a question here because I don't know anywhere else people who have sufficient skill to answer.
I hope the thread is posted in the right section, if not, sorry and please move it where it belongs.
I'll try to simply explain my problem.
I have Business Objects XI 3.1 enterprise and i use InfoView to open a CrystalReport report.
When I export it, (the extension does not matter) the location window opens and the default name is CrystalReportViewer.xxx .
What I need is to not show to the customer the default name but the name of the report itself.
Anyone has an idea?
Thank you a lot!
Cric

We have a similar request for our companies deployment. Unfortunately I found that this is normal behavior for the application and that an enhancement request has already been opened (ADAPT01550068).
SAP note 1491438 can provide you with additional information. Hope this helps.
Edited by: Rodney Barrera on Feb 17, 2012 5:11 PM

Printing in LR4: what printer profile must be use when using an Epson Stylus Pro3800?

Please help. Thank you.

The printer profile should be something like <Epson Stylus 3800 Epson Ultra Photo Paper Luster>; in other words the profile has to be specific for your printer AND the paper you are using for this specific print.
Your printer came with several profiles for Epson paper. If the paper you are using is not among them, or if you are using a non-Epson paper, you have to download the icc profile for this paper from the paper manufacturer's website, and after downloading it you have to install it. Some profiles are compressed files; these have to be un-compressed (un-ZIPPed) before installation.

Objects 'jumping' too far when trying to drag objects, loss of incremental moves

im on a mac using indesign cc. when i try to drag objects with my cursor they dont move in small increments anymore... i feel like i hit some command that i can figure out what.
here are my setting in grids and guides...
i thought i was snap to grid but i dont have that checked.
ideas?

Try to "capture" your first page thru the menu Format > Advanced > Capture Pages"
Then you will be able to insert a new page with the defined attributes from the menu entitled "Sections" in the toolbar.
Yvan KOENIG (from FRANCE jeudi 23 juillet 2009 19:09:05)

When saving a pdf the objects on the page appear offset of the page boundries.

This happens mostly in illustrator but it just happened again to me while printing a .ps booklet out of indesign and converting to a pdf using distiller.
See the image below:
The left shows my InDesign Document. On the right is the pdf that results from the save. As you can see the page boundaries are being completely disregarded when saving the pdf and everything is equally shifted down and to the right.
Here is an example of me having the same problem in illustrator:
As you can see there is sometimes zero correlation between what is on the artboard and what page the objects end up on in the pdf.
This problem also has another strange symptom, it seems to have to do with dragging images from firefox onto an artboard in illustrator. The image is place automatically in the center and all objects in the file move together in one direction. see before and after photos below:
Before:
After image dragged in:
You can even continue to drag images in and it will move in the same direction the same amount every time:
I'm running Adobe CS6 on OSX 10.9.1.
Thanks in advance!

In so many words: We can't know. You have not provided any details about your exact settings, what version of Acrobat, your placed images, color settings, color profiles and a million other things including perhaps providing your test fioles for inspection by other people. That aside simply ask in teh relevant ID/ AI/ Acro/ PDF forums. This place here is a dead place and only meant for general sales, install and activation questions, not specific workflow questions.
Mylenium

HELP! When saving a pdf the objects on the page appear offset of the page boundries.

This happens mostly in illustrator but it just happened again to me while printing a .ps booklet out of indesign and converting to a pdf using distiller.
See the image below:
The left shows my InDesign Document. On the right is the pdf that results from the save. As you can see the page boundaries are being completely disregarded when saving the pdf and everything is equally shifted down and to the right.
Here is an example of me having the same problem in illustrator:
As you can see there is sometimes zero correlation between what is on the artboard and what page the objects end up on in the pdf.
This problem also has another strange symptom, it seems to have to do with dragging images from firefox onto an artboard in illustrator. The image is place automatically in the center and all objects in the file move together in one direction. see before and after photos below:
Before:
After image dragged in:
You can even continue to drag images in and it will move in the same direction the same amount every time:
I'm running Adobe CS6 on OSX 10.9.1. Please let me know what other settings you might need to know to help solve this problem.
Thanks in advance!

In so many words: We can't know. You have not provided any details about your exact settings, what version of Acrobat, your placed images, color settings, color profiles and a million other things including perhaps providing your test fioles for inspection by other people. That aside simply ask in teh relevant ID/ AI/ Acro/ PDF forums. This place here is a dead place and only meant for general sales, install and activation questions, not specific workflow questions.
Mylenium

Delay when querying from CUBE_TABLE object, what is it?

Hi Guys,
We are using Oracle OLAP 11.2.0.2.0 with an 11g Cube, 7 Dimensions, Compressed and partitioned by Month.
We have run into a performance issue when implementing OBIEE.
The main issue we have is a delay while drilling on a hierarchy. Users have been waiting 7-12 seconds per drill on a hierarchy, and the query is only returning a few cells of data. We have managed to isolate this to slow performing queries on CUBE_TABLE.
For example, the following query returns one cell of data:
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('E01' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885' )
AND FINSTMNT_VIEW.TIME IN ('JUN11' ) ;
1 Row selected in 4.524 Seconds
Note: FINSTMNT_VIEW is the automatically generated cube view.
CREATE OR REPLACE FORCE VIEW "SCHEMA1"."FINSTMNT_VIEW" ("BASE","REPORT_TYPE", "COMPANY", "SCENARIO", "PRODUCT", "ACCOUNT", "SITE", "TIME")
AS
SELECT "BASE", "REPORT_TYPE", "COMPANY", "SCENARIO", "PRODUCT", "ACCOUNT", "SITE", "TIME"
FROM TABLE(CUBE_TABLE('"SCHEMA1"."FINSTMNT"') ) ;
If we increase the amount of data returned by adding to the query, it only increased the query time by .4 seconds
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('E01' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885', 'C010886', 'C010891', 'C010892', 'C010887', 'C010888', 'C010897', 'C010893', 'C010890', 'C010894', 'C010896', 'C010899' )
AND FINSTMNT_VIEW.TIME IN ('JUN11' ) ;
12 rows selected - In 4.977 Seconds
If we increase the data returned even more:
SELECT FINSTMNT_VIEW.BASE, FINSTMNT_VIEW.REPORT_TYPE, FINSTMNT_VIEW.COMPANY, FINSTMNT_VIEW.SCENARIO, FINSTMNT_VIEW.PRODUCT, FINSTMNT_VIEW.ACCOUNT, FINSTMNT_VIEW.SITE, FINSTMNT_VIEW.TIME
FROM "SCHEMA1".FINSTMNT_VIEW FINSTMNT_VIEW
WHERE
FINSTMNT_VIEW.REPORT_TYPE IN ('MTD' )
AND FINSTMNT_VIEW.COMPANY IN ('ET', 'E01', 'E02', 'E03', 'E04' )
AND FINSTMNT_VIEW.SCENARIO IN ('ACTUAL' )
AND FINSTMNT_VIEW.PRODUCT IN ('PT', 'P00' )
AND FINSTMNT_VIEW.ACCOUNT IN ('APBIT' )
AND FINSTMNT_VIEW.SITE IN ('C010885', 'C010886', 'C010891', 'C010892', 'C010887', 'C010888', 'C010897', 'C010893', 'C010890', 'C010894', 'C010896', 'C010899' )
AND FINSTMNT_VIEW.TIME IN ('JUN11', 'JUL11', 'AUG11', 'SEP11', 'OCT11', 'NOV11', 'DEC11', 'JAN12') ;
118 rows selected - In 14.213 Seconds
If we take the time for each query and divide by the number of rows, we can see that querying more data results in a much more efficient query:
Time/Rows returned:
1 Row - 4.524
12 Rows - 0.4147
118 Rows - 0.120449153
It seems like there is an initial delay of approx 4 seconds when querying the CUBE_TABLE object. Using AWM to query the same data using LIMIT and RPR is almost instantaneous...
Can anyone explain what this delay is, and if there is any way to optimise the query?
Could it be the AW getting attached before each query?
Big thanks to anyone that can help!

Thanks Nasar,
I have run a number of queries with logging enabled, the things you mentioned all look good:
Loop Optimization: GDILoopOpt     COMPLETED
Selection filter: FILTER_LIMITS_FAST     7
ROWS_FAILED_FILTER     0
ROWS_RETURNED     1
Predicates: 7 pruned out of 7 predicates
The longest action I have seen in the log is the PAGING operation... but I do not see this on all queries.
Time Total Time OPERATION
2.263     27.864          PAGING     DYN_PAGEPOOL     TRACE     GREW     9926KB to 59577KB
1.825     25.601          PAGING     DYN_PAGEPOOL     TRACE     GREW     8274KB to 49651KB
1.498     23.776          PAGING     DYN_PAGEPOOL     TRACE     GREW     6895KB to 41377KB
1.232     22.278          PAGING     DYN_PAGEPOOL     TRACE     GREW     5747KB to 34482KB
1.17     21.046          PAGING     DYN_PAGEPOOL     TRACE     GREW     4788KB to 28735KB
1.03     19.876          PAGING     DYN_PAGEPOOL     TRACE     GREW     3990KB to 23947KB
2.808     18.846          PAGING     DYN_PAGEPOOL     TRACE     GREW     3325KB to 19957KB
What is strange is that the cube operation log does not account for all of the query time. For example:
SELECT "BASE_LVL" FROM TABLE(CUBE_TABLE('"EXAMPLE"."FINSTMNT"'))
WHERE
"RPT_TYPE" = 'MTD' AND
"ENTITY" = 'ET' AND
"SCENARIO" = 'ACTUAL' AND
"PRODUCT" = 'PT' AND
"GL_ACCOUNT" = 'APBIT' AND
"CENTRE" = 'TOTAL' AND
"TIME" = 'YR09';
This query returns in 6.006 seconds using SQL Developer, if I then take the CUBE_OPERATION_LOG for this query and subtract the start time from the end time, I only get 1.67 seconds. This leaves 4.3 seconds unaccounted for... This is the same with the my other queries, see actual time and logged time below:
Query     Actual     Logged      Variance
S3     6.006     1.67     4.336
L1     18.128     13.776     4.352
S1     4.461     0.203     4.258
L2     4.696     0.39     4.306
S2     5.882     1.575     4.307
Any ideas on what this could be or how I can capture this 4.3 second overhead?
Your help has been greatly appreciated.

The last few days I have been constantly saving my file. About an hour ago I opened my file and the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the

The last few days I have been constantly saving my file. A couple of hours ago I renamed the file and then reopened my file a little while later, but the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the fields aren't populated when I open it up. Fyi, I have the free subscription.

Hi Constance,
As i understand your changes in the pdf were not saved...Are you still facing this issue?
Regards,
Rahul

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again. Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
Thanks
phil

I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

I am using a MacPro running OS 10.6.8. When saving an image in PS CC I no longer have a thumbnail of the image in my folder , just a generic PS symbol thumbprint. What do I do to get my image thumbnail back?

I am using a MacPro running OS 10.6.8. When saving an image in PS CC I no longer have a thumbnail of the image in my folder , just a generic PS symbol thumbprint. What do I do to get my image thumbnail back?
Adobe Creative Cloud

Photoshop CC needs at least OSX 10.7-10.9
You may be able to install and run it on 10.6.8, but as I understand it the rules for generating thumbnails has changed with Apple and CC writes them to suit the required OSX.
Photoshop CS6 will always give you image thumbnails but CC and CC 2014 have had thumbnails generated differently for the required OSX.
You will have to upgrade to 10.7,10.8, or 10.9
My file saving preferences are set like this:

I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"- it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"… it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

Any help here...
http://support.microsoft.com/kb/288117
http://www.macworld.com/article/1154785/welcomebackvisualbasic.html

What BI-object must be changable when saving a Broadcasting object ?

Similar Messages

Maybe you are looking for