What causes  carriage returns to become page turns in Epu  docs from Pages?

I converted a long document from pages to Epub. Towards the end a section adds a new page at each carriage return. I tried everything. still can't fix it.

I think that both your pages have a missing </div> at the end somewhere.
Opps... that happened when I was stripping down the page to create a working example of my issue. I've fixed the missing div and re-uploaded both pages. The problem is still there.
Change display: inline; to float: left; and add margin: 0 0 4px 4px; (as shown below)
I had already tried using float, but something else in the code was forcing the columns to 2 instead of 3.
Have you used "Apply Source Formatting" ?
I use that religiously. I'm quite anal about visually clean code.
Well, I just fixed the problem while replying... funny... I removed the margins from the actual img element (.imageThumb img) and placed it on the div which surrounds the img (.imageThumb). I also reapplied the float. Thanks all for the help - it helped me rethink. But I could have sworn I had once placed the margins on .imageThumb before and it didn't work.
.imageThumb {
    width: 100px;
    height: 75px;
    display: inline;
    float: left;   
    margin: 0px 10px 10px 0px;
    cursor: pointer;
.imageThumb img {
    /*margin: 0px 10px 10px 0px;*/

Similar Messages

  • What cause black screen down with forced turn off notice?

    My mac book pro is just 4months old. I had some probelm and replaced logic boad a month ago.
    But I suddenly experience that black screen going down with forced turn off notice.
    I was so scared I will have a serious probelm again or not. Hence is there anyone when this sign shows?
    And ther other issues, just checked console
    Thus I checked console there is error apple: dock.agent KCGError IllegalArguement: CGSSet Window trasform at placment: singular matrix (please attach the file).
    is there anyone who knows what causes this error and how I can fix it?
    Thank you in advance.
    Best wishes
    Joon

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • What causes my screen on ipad to turn red?

    What would cause my ipad screen to turn red?

    The first thing I would do to try to end this behavior is reset the iPad.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.  Hopefully that will end the redness.
    If not, the next step would be a restore.  Plug your iPad into iTunes, let it sync, then press the "Restore" button on the right of the iTunes display.

  • Carriage returns changed to soft returns

    Hi all,
    I have a microsoft word document that's been written in "single spacing", or what I think is single spacing. Basically I've got it so that every Return hit, it leaves no space between the paragraphs (like a soft return).
    When I imported the file into InDesign using the Place comand, all the carriage returns were twice as big as they were in Microsoft Word. Is there any way to change how much space a carriage return creates under a paragraph? Specifically I would like all my Carriage Returns to become the size of soft returns (Forced Line Break), is that possible?
    I signed up to Lynda.com and I've done lots of research to find the answer by looking through forums but this is still my first week into using InDesign and I can't understand a lot of the language involved. The microsoft word document is over 3 thousand pages long and so fixing each paragraph one by one is a very last resort for me. Here's what I've tried:
    1) Changing Leading throughout the entire document. This doesn't work as it ruins the paragraphs themselves, and didn't change the carriage returns much.
    2) I used the Find/Change tool to find all Carriage returns "\r" and replace them with soft returns "\n".   I was sure this was a genius move but for whatever technical reason I can't understand, it OBLITERATED the structure of my document.
    So anyway, back to square one Been stuck on this for a good 7 hours now haha.
    Cheers to anyone that bothers reading this, especially if you know the solution

    Well, if you typed this Word document yourself, you have been going at it the wrong way right from the start. Compare with your post; did you insert a return at the end of each line, or did you just type on and let the forum software break the lines for you?
    1) This leads to nothing. "Leading" defines the distance between lines, and does nothing special with Hard returns. The lines will still be broken as they were.
    2) This leads to nother either. A hard return says: I want all of the next stuff on the next line. A soft return says the same. They only add stuff that makes individual lines justify.
    You should (a) not expect InDesign to automagically fix badly typed files, and (b) replace each hard return with a single space. That ought to make your text behave slightly more natural.

  • HT4906 what iPhoto update do i need to turn on photo stream

    How can i turn on photo steam from icloud    it says i need an i photo update in order to turn on photo stream   what update??  I want to turn photo stream on from my mac

    OS X 10.7.4 and iPhoto '11 9.2.2. Or later
    http://support.apple.com/kb/HT4486 for full info
    LN

  • When synching my ipod 80 gig classic, I get this message " iPod cannot be synched.  A duplicate file name was specified"  And yet, any new music in iTunes is added.  What causes this message?

    When synching my ipod 80 gig classic, I get this message " iPod cannot be synched.  A duplicate file name was specified"  And yet, any new music in iTunes is added.  What causes this message?

    Try deleting the iPod Photo Cache from the nominated folder that you have set up to sync photos to the devices.
    See iTunes: Understanding the iPod Photo Cache folder for more info.
    tt2

  • SQLLDR ignoring carriage returns

    Can SQLLDR ignore carriage returns? I am trying to load records
    from Access to Oracle. The columns I am loading contain content
    for displaying on the web (Text inter-mixed with HTML code).
    Because these columns were created/updated via a web interface,
    they contain a lot of carriage returns. The problem I am having
    in SQLLDR is when it sees a carriage return, it thinks it is a
    new record. Can I prevent this without manually removing the
    carriage returns in the Access records?

    Hi William,
    The Workbench should help you since it uses the following SQL
    Loader syntax :-
    "str '<er>'" specifies that the end of record delimiter is <er>.
    This means carriage returns will be preserved. Also <ec> is the
    end of column delimiter.
    load data
    infile 'AUTHORS.dat' "str '<er>'"
    into table AUTHORS
    fields terminated by '<ec>'
    (AU_ID ,
    AU_LNAME ,
    AU_FNAME ,
    PHONE ,
    ADDRESS ,
    CITY ,
    STATE ,
    ZIP ,
    CONTRACT )

  • Ask your question.Can't render get File error access denied. Whats causing this? FCP 7.0.3

    I Can't render get File error access denied. Whats causing this? FCP 7.0.3

    Its an was update from an earlier version.
    What earlier version?
    And you're saying when you using File>Import>File and select a JPEG you get the error message?
    You can't or shouldn't import MP3s into FCP.
    Have you try creating a new porject and importing into that?

  • Mac randomly crashes, screen turns green and white, and it works fine upon restart. What causes this and how can I fix it?

    My MacBook Pro 13 inch (I've had it for about a year and a half) has started crashing randomly. It happens about once a week and it will happen when I'm in the middle of either watching a video, typing a paper, playing a game, etc. The computer clicks loudly and the screen becomes a series of green and white lines. It works fine upon restart, but it's still annoying whenever it happens. What causes this? Is it fixable?

    The image suggests an issue with the graphics board.
    The issue may happen more when your machine is generating additional heat, as when you're watching or processing video, or gaming. I can't say for certain, of course, but certain things will reduce the chance of the problem recurring:
    1. Keep your machine as cool as possible. When there's additional heat, turn up the fan, or use an app like HD Fan Control to reduce the heat. Use your computer the way you see fit, but be conscious of heat.
    2. Back up on a regular basis. Logic board problems can lead to more serious issues down the line, so backing up is a good way of safeguarding your data.
    3. Look up "Logic Board Woes" on Google for a comprehensive discussion of the issue.

  • What causes blank pages appearing suddenly in an autoflowed-text document?

    CS5.5, english version.
    The complete book was built-up and all master pages were applied . When reopening the file, several blank pages appeared at two places in the document. The text flow was not interrupted, but seamed «hidden» under a non-existing white layer. The software showed «Master page applied», but the pages were blank, imposible to select any object or to place a new text frame. It was also impossible to reapply the master page (the pages were still blank after). We could not access the hidden part of text, even if it was obviously still present, and we had no choice but rebuild a new document.
    We don't know what caused this very disturbing bug, and we would avoid it to reappear again! If someone knows a trick, you're welcome!
    Version : Indesign CS 5.5, en anglais.
    Le livre était monté en entier avec pages maîtresses appliquées. Lors d'une réouverture du fichier, plusieurs pages vides sont apparues, à deux endroits dans le document. Le texte n'était pas interrompu, mais semblait «caché» sous un calque blanc. Le logiciel affichait l'icône de la page maîtresse appliquée, mais la page demeurait vide. Impossible de sélectionner une boîte de texte ni de parvenir à réappliquer la page maîtresse. Nous n'avons pas réussi à accéder à la portion de texte «cachée» sous ces pages vides, bien qu'elle n'ait de toute évidence pas été perdue.
    Nous n'avons pas trouvé d'autre solution que de recommencer le montage à zéro à partir d'un nouveau document, mais nous ne savons pas ce qui a causé ce problème, ni comment éviter qu'il survienne à nouveau.
    Si quelqu'un a déjà rencontré cette anomalie et peut m'informer, bienvenue!

    I'm afraid I don't have any good news for you, though I was able to get the text to reappear by deleting the blank pages and inserting new ones, then rethreading. Youy could do this, but I suspect it is a short-term fix that won't last a day and more important, that output will fail.
    ID seems to think the frames on the blank pages are lines with astronomically long lengths and they seem to be sheared as well. Needless to say that seems to be some sort of corruption in the file. The reason that I don't have good news is that I've been completely unable to export anything useful for repair out of the file and reimport it-- neither .idml or tagged text. In all cases I get an error message that the  either the file does not exist, it is in use or I don't have permission. I know the files exist -- I can open the text file in a text editor, and I can see the components of the .idml file if I change the extension to .zip, but I can't convince any version of ID to access either of them.
    I looked through the file history and noticed that this file began life as a CS4 file that was converted to CS5.5 in August of 2011. I think that's the source of the problem. From time to time we get reports of unexplainable glitches or files that will not output, or just refuse to open at some point, even though they were fine hours earlier, and quite often it turns out that these are legacy files that were directly updated in a newer version. Because of this I now recommend that all legacy files that are to be converted be exported to .inx or .idml from the original version, then that exported file should be opened in the new version.
    Actually I had one more thought, and it seems to have been at least partly successful. As I mentioned, I was able to export the main story to InDesign Tagged Text and open that in a text editor (Notepad in this case, since I'm on PC). I tried saving the file from notepad with a new name and lo and behold I can now import it into a new file or use it to replace the text in the original. I tried the replacement, and exporting another .idml. but that still fails to reopen, so the corruption is not in the text of the main story. A .idml file export from a new .indd with the resaved tagged text placed in it also is working.
    This means you actually have a good shot at rebuilding this file fairly quickly. Export the stories to tagged text, open those in a plain text editor of your choice and resave as plain text, then place them into a new document with the same page dimensions and margins (rebuild the master pages from scratch in the new file). Make a backup copy of the file with just the text, and make sure it is working properly and that you can export to .idml and PDF, then add the images and check again. I think this is going to work, though it may take a few hours.
    DON'T overwrite any of the files you have already -- use new names, and do a save As a the end of each session or at any major change point adding a version number to the name so you have a good backup version chain in case something goes wrong again. Good luck.

  • What is escape character for for Carriage Return, Line Feed, Form Feed

    Hi
    I need to a text file which should have following characters
    Carriage Return, Line Feed, Form Feed
    How do i insert them in a string
    i know "\f" is carriage return,
    but what are characters for line feed and form feed
    Ashish

    uncle_alice wrote:
    jverd wrote:
    remus.dragos wrote:
    I forgot that it does not exist in Java. A good thing
    from my point of view.Running the following makes my computer beep.
    public class Bell {
    public static void main(String... args) {
    System.out.println("\u0007");
    Sure, sending a BEL character to the console rings the bell, but that has nothing to do with Java. Anyway, I think he meant Java doesn't support the \a escape sequence in string and char literals.
    >
    >
    >I forgot that it does not exist in Java. A good thing
    from my point of view.
    Running the following makes my computer beep.
    public class Bell {
    public static void main(String... args) {
    System.out.println("\u0007");
    } Sure, sending a BEL character to the console rings the bell, but that has nothing to do with Java. Anyway, I think he meant Java doesn't support the \a escape sequence in string and char literals.
    Ah, I thought he was saying Java doesn't support ringing the bell.

  • Apostrophe cause a carriage return when sig is selected

    I've got no clue on this one folks, only seems to happen in mail when a sig file is selected as a default, regardless of whether a new signature is created from scratch or a pervious one is chosen.  If none is select it appears to not happen or the adding of an apostrophe does not invoke a carriage return?
    All clues and observations welcome!
    Mr. "P"

    Yes as it turns out someone had turned on smart quotes in the keyboard system preferences.
    Case closed...

  • What do you enter for a Carriage Return in Find&Replace?

    I'm using TextEdit to find and replace all instances of a string in an exported .txt with Carriage Returns (CRs). Only, I can't figure what to press in the 'Replace with:' field to tell TextEdit that I want the CR to go in there. Obviously, if I just press Enter, it will just Find then next occurrence of the 'Find' string.
    Any tips?
    What I have been doing as a clumsy work-around is type a CR in the .txt file, and then copy-paste in into the 'Replace with:' field. Only I thought maybe there's a cleverer way of doing it.

    Alex Zachopoulos wrote:
    What I have been doing as a clumsy work-around is type a CR in the .txt file, and then copy-paste in into the 'Replace with:' field.
    I don't know of a better way to initially set up the Carriage Return in the "Replace with:" field. However once you have done that, you can get it back from the drop-down list associated with that field (it will appear there as a blank line).

  • TCS2 Inline graphics hidden by conditional text cause unwanted carriage returns

    I have some FrameMaker documents where there are some small icons in the text.  Their anchored frames are set to be "at insertion point" in FrameMaker. They work fine normally, but when the icons are hidden by conditional text, they cause unwanted carriage returns in the RoboHelp output. The text is split into different paragraphs in the middle of the sentence.
    For example, this is the FrameMaker input:
    And this is the RoboHelp (WebHelp) output:
    I notice that if I manually edit a topic in the RoboHelp editor, I can manually apply a conditional tag to an inline graphic without causing a line break.
    So, I'm wondering if there's a way to avoid this when using linked FrameMaker documents.
    Thanks,
       Philip.

    Your logs are generated automatically by your system as it runs - there is nothing further that you need to do. They are ordinary text files, so you can display them on a terminal using any of the usual tools - cat, less, grep, etc.

  • My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    This has happend to my ipod once...
    did u keep it somewhere so tightly pressed??
    that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

Maybe you are looking for