Doubt on set locale and translate

Hi,
If we use Set Locale then if the file is having multi Lingual data then what will happen when Translate is used ????
Thank you

hi check this...
DATA text_tab TYPE HASHED TABLE OF string
              WITH UNIQUE KEY table_line.
INSERT: `polo`    INTO TABLE text_tab,
        `pollo`   INTO TABLE text_tab,
        `chunky` INTO TABLE text_tab,
        `crunchy` INTO TABLE text_tab.
SET LOCALE LANGUAGE 'E'.
SORT text_tab AS TEXT.
PERFORM write_text_tab.
SET LOCALE LANGUAGE 'S'.
SORT text_tab AS TEXT.
PERFORM write_text_tab.
SET LOCALE LANGUAGE ' '.
FORM write_text_tab.
FIELD-SYMBOLS <line> TYPE string.
LOOP AT text_tab ASSIGNING <line>.
    WRITE / <line>.
ENDLOOP.
SKIP.
ENDFORM.
regards,
venkat.

Similar Messages

Setting locale and S2X Editor

Two questions:
1. Is it possible to set the locale of a webDynpro-Application in the coding?
2. Does an (S2X) editor for the xlf-files exist. The persons that will translate our application do not have eclipse (SAPnetweaver developer) installed.

ifaigios wrote:I edited Beginner's Guide yesterday replacing the old method of setting the default locale and the hostname, with localectl and hostnamectl. However, as you discovered, it seems that these commands require DBus to be running to work, so they are of no use in the chroot. Thankfully, thestinger reverted my edits as soon as you found out the problem, so the page contains the correct information again. I am sorry for the inconvenience and for any trouble I caused.
No problem, thanks for helping! However, I think you missed a few 'systemctl' commands. There's three here and one here. I don't know how to fix them, so for now I'll just configure them on reboot.

Setting Locale and Hostname on New Installation Fails

Hello,
Tried doing an Arch install on my Acer Aspire One D255 today, but when I try to set the hostname and locale while chroot'ed into /mnt, I get:
Failed to get D-Bus connection: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
This occurs when running hostnamectl and localectl as per the Beginners' Guide. I had to set the locale manually in /etc/locale.conf, but I don't know what to do about the hostname, and something seems to indicate there's a more serious issue.
Any idea?

ifaigios wrote:I edited Beginner's Guide yesterday replacing the old method of setting the default locale and the hostname, with localectl and hostnamectl. However, as you discovered, it seems that these commands require DBus to be running to work, so they are of no use in the chroot. Thankfully, thestinger reverted my edits as soon as you found out the problem, so the page contains the correct information again. I am sorry for the inconvenience and for any trouble I caused.
No problem, thanks for helping! However, I think you missed a few 'systemctl' commands. There's three here and one here. I don't know how to fix them, so for now I'll just configure them on reboot.

Setting Up and Coordinating Translation

Hi Friends,
AFter the upgrade to ecc we need to do Setting Up and Coordinating Translation which is according to note 1149631, did any one already done this, if so can u please let me know what you followed , as when i see in help.sap.com , it is nearly 150 pages http://help.sap.com/saphelp_nw04s/helpdata/en/f4/89c26829c311d5b2be0050da3f31b1/frameset.htm
or if you have any notes can you forward the same. I would be very greatfull to you.
Please help.
Thanks
anuroop

Friends please reply and help

I set my cRIO from 'DHCP' to 'link local' and lost contact with it.

I set my cRIO from 'DHCP' to 'link local' and lost contact with it.
I changed the setting at the placed labeled "2" to link local only, then I think I hit save at "3". Then poof, I had no network contact with my cRIO.
I tried;
Hitting the reset button
Opening a closing MAX
Going to safe mode
Throwing the Reset IP switch
Power cycling the cRIO
Running cat 5 cable directly from the Host to my target
None of it worked, and I have no contact with my cRIO.
This is what MAX looks like now. How can I fix this?
Solved!
Go to Solution.

Make sure to disable the firewall on your computer.
Otherwise you can check through the steps in this documentation:
http://digital.ni.com/public.nsf/allkb/ABE4BC247E8AC9BC8625734E005CAB42
Note specifically that one option is to read the console out from the target VIA the serial port will a null modem cable during boot and it will indicate what IP the system is using.
Craig H. | CLA | Systems Engineer | National Instruments

Exporting pdfs to word and excel file formats and translating

Hello, I am new to this forum and came here because I am a professional translator. Although we should be given documents in their original file format, in the real world translators have to convert pdfs such as manuals or annual reports into word or excel files. Given the fact we often work for agencies, and/or do not work directly with the people who created the original files inthe first place, with the best will in the world we normally have to make do with converting the pdf file, or lose the job.
I would like advice on the best way to learn more about pdf to word and excel conversion and ways of keeping formatting when it is helpful and removing what is not.
The general problem is (well the problem is really ignorance on my part!) of course getting the "look and feel" similar in the converted document and knowing more about manipulating the formating and elements which get converted.
Any help or pointers to online tutorials whether multimedia or text much appreciated.
David Hardisty (david1610)

Thank you Lori, this is so clear! I am a teacher as well and there are clear presentations and wonderfully clear presentations and this is in the latter category.
A tiny suggestion. You would not believe how many pdf files exported to word I have received that are Portuguese content and the sender has not set the language to Portuguese! So in your text entry you might want to mention the language setting. I know it is obvious, but as we know sometimes we cannot see the obvious!
I will need to look far more carefully at the final things in your video.
Are there any special considerations for exporting pdf files as Excel? My original doubt was I had to translate some accounting documents. 95% of the document was numbers which did not changing (except for commas to periods and vice versa due to different separator conventions). I did not now how to just select e.g. the vertical column with text. I will go back and try with this suggestion because in this case the look and feel of the numbers was important and the precise fonts etc. seemed to cause problems. But now I am getting out of my depth!
Thank you again!
DavidHardisty

Hostname is .local and Kerberos problems

Hi
Having problems with our new xserve. The computername as set in server admin is 'serverx' which is giving a local hostname of serverx.local. I have DNS running with one zone of <domainname>.org.uk, servername of serverx giving a FQSN or serverx.<domainname>.org.uk
However i had an email out from the mailman mailing list asking for permission to allow a post to a mailing list and it had the link to click on as http://Serverx.local/mailman/.....
Obviously i'd like this to be http://serverx.<domainname>.org.uk
This also extends to the server's searchbase, which on the old server we migrated from was dc=<hostname>,dc=org,dc=uk which now is showing as dc=serverx,dc=local under opendirectory - settings - protocals
The Open directory pane shows everything running apart from Kerberos which is stopped. If i try and kerberize the server using the realm name of <DOMAINNAME>.ORG.UK it whirrs away before returning me to the 'kerberize the open directory master' dialogue. Looking at the slapconfig log i get the errors...
The KDC is not running error = 3
failed to configure error = 3
Is there a way to change this so that the domain name and seachbase are correct and how do i get the KDC to run so i can kerberize the server.
Hope some of that makes sense...
Thanks
Quad 2GHz Intel Xserve Mac OS X (10.4.9) 2GB ram

I had similar issues with .local and trying to migrate away. I decided to manually massage a backup into the non-.local domain. It worked for me, but I will stress that you should make a copy of your backup to do this on.
First, decide what new domain you want to use. If you're building on a private network, you can use a non-valid domain, like '.int' . Setup your DNS.
Use Server Admin to make a backup of your OD Domain. Make a copy. Burn it to CD. We don't want the original to change.
Kerberize to the new domain. Make a new backup and burn it to CD as well.
Open a modifiable copy of the backup. In it are many files, most of them are straight text files of one flavor or another. Time to get dirty...
Backup.ldif is the big file to work with. You must go in and change all of the olddomain.locals to newdomain.tla (this is pseudocode, please use your own domains where you see these two.) You must also change all of the dc=olddomain,dc=local to dc=newdomain,dc=tla . The fun about this file is that Apple wraps it manually, which makes search and replace tedious, as there will be some of these things at the end of lines. The good news is that they are far from random, so you can search for parts of the name (local is a good search) and find the next iteration. Here are a couple examples...
...dc=ol
ddomain,dc=local
...dc
=olddomain,dc=local
...dc=olddoma
in,dc=local
The key is to search and replace the whole thing at once. I used textedit and pasted the entire offending text into the find box, then replaced with the proper new dc= values. You need not worry about wrapping, the importer doesn't care. The key is to make sure that you get it all.
Now do the same with all of the other files. I didn't touch authservermain, which already had the new Kerberos domain in it. I did modify these files...
Backup.ldif
authserverreplicas
authserveroverflow.x
DSLDAPv3PluginConfig.plist
slapd_macosxserver.conf
local.dump
local.krb5realm
Make sure to check the other files, as different configurations will yield info in different files.
Once you are done with this, it's time to turn your nice pretty domain into a standalone. It appears that the archive and restore tools are much better in 10.4.x that older versions, so it actually works to restore things. There was one caveat. My standalone seemed to ignore the /etc/krb5adm.keytab, which then caused the conversion to Master domain to hang. Move to krb5adm.keytab.old it in case you need to restore.
Make your server a Master again, this time with the new FQDN and search string.
Import your modified backup. Your users should now be in place, although I lost my domain admins in the process.
Finally, backup your domain, revert to standalone, toss the .keytab, convert to Master, and restore. This last step converts the bdb back into text, then back to the bdb. I was having a little strangeness until I did this step, which I believe clears up some cruft.
Here are the benefits that I've seen in this process...
- Passwords translate
- migration is complete to new domain
- easily restorable and/or recoverable
Of course, your mileage may vary.

Setting locale at runtime (Using SDK)

Hi,
Does anyone know how to set "Product Locale" at runtime?
I am writing a web app in C# that will take user's input to decide which language to use.
I am trying to set UserInfo.Locale and UserInfo.PreferredViewingLocale before calling openDocument.jsp.
The report itself works great. It translates into the language of my choice. But the Webi interface does not.
Any help?
Thanks!
Michael

Hello Michael,
When using the OpenDocument method (.jsp or .aspx) you're "shelling out" from any custom application over to the OpenDocument application. The URL parameters will only affect the document being called. In my experience there aren't any URL parameters that directly interact with the viewer itself.
There's no SDK "hook" into the OpenDocument method. This is by design. The OpenDocument method is designed to directly access a report without using the SDK. If you need more granular control you'll probably want to explore writing a full blown application that makes full use of the Enterprise SDK.
Sincerely,
Dan Kelleher

Local Currency - Translation Date Type

Hi:
We are on ECC 6.0 with New GL.
I wanted to check if we can change the Translation Date Type for 1st local currency (10) from Translation date to document date? There are three options in this field - Posting date, document date and translation date. But when we maintain it (under additional local currencies for a company code), local currency has this grey out and comes default to translation date. Not sure where it is defined that local currency can be translated only based on translation date.
However for 2nd and 3rd currencies this field is open and allow to choose any date type.
Please advise.
Thanks,
Rahul

Hello Rahul,
For the local currency, it is hard-coded in the system to
choose the translation date as the transalation date (type 3). If you
change this translation date when you enter a document, the system will
use this new date. However, if you don't change this, the system will
always use the posting date as translation date for the local currency.
hope thic clarifies
Ray

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Local and ISP DNS

Hi all,
i have a local DNS server for some local stuff like website,ldap and so on and the normal ISP DNS.
On Client i have entered the local DNS IP (xxx.xxx.xxx.xxx) and the ISP DNS IP (yyy.yyy.yyy.yyy).
So here is my problem when the Local DNS IP is on top of the table i can surf only the local websites but not the public. vice versa is it for when i have the ISP DNS IP on top. what can i do to surf all website, the local and the public.

Your DNS is asking a "lame" server for DNS; you're not getting an authoritative response to the query.
The target DNS server for the query isn't configured correctly; the local DNS server has found a target DNS server for the domain as being authoritative for the zone, but the target DNS server is not configured as being authoritative for the zone.
i configured my router for forwarding the port 53 to my local dns, but it didn't solved the problem!
That's not what I'd choose here.
Your clients are aimed at your DNS server. Your DNS server is aimed at your ISP servers. Your firewall is set to pass DNS out, but (generally) to block inbound DNS requests. Your DHCP is set to serve your DNS server address. If you've been tossing configuration changes and such here within your clients and your DNS servers, then you may well have some stale stuff in the DNS caches, too.

Is it possible to set Local Currency - INR in SAP B1 8.81

Hi,
In SAP B1 Version 8.81 , i have taken Type -Chart of Accounts - as Global
and Localization - United Kingdom And just tell me is it possible to set
Local Currency - INR in SAP B1 8.81

Hi,
You can set any currency till the time there is no transactions in the database.
Please do remember that the on selection of the Localization UK, the legal aspects and the tax law pertaining to the UK will be applicable and also you have to check for the exchange rate calculation based on settings (direct/indirect).
Also, taking INR as LC will lead to INR being the main currency and hence the reports generation and reconciliation of all the Multi-Currency will be performed in the Lead Currency.
All the Best.
Kind Regards,
Jitin
SAP Business One Forum Team

How "not to set locale " in user's profile?

In the "Oracle Universal Content Management 11gR1 Differences between 11gR1 and 10gR3" document
http://www.oracle.com/technology/products/content-management/ucm/diffsbetween10gand11g.pdf
says:
"If locale is not set in a user’s profile, Content Server can pick that up from a HTTP header variable."
However, how do I "not to set locale " in user's profile? it appears as a dropdown list and there is no option to enter null.
Thanks

Hi there,
What you're changing is per-user but those options are set in the Utilities->System Properties applet
Here's how you change it:
Go to the System Properties applet:
UNIX: Start the System Properties utility by running the System_Properties script, which is located in the bin subdirectory of the Stellent Content Server installation directory.
Windows: From the Windows Start menu, select Programs -> Content Server Content Server -> [Instance Name] -> Utilities -> System Properties.
Then once the System Properties applet is started:
# Open the Localization tab.
# In the list of locales, you can Disable the locales you have here or maybe a new option with 11g will show up.
# When you are done, click OK to apply the setting and exit System Properties.
# Restart each instance of the content server.
Cheers,
malky

"RT Set date and time" does not set seconds in UTC mode

Hallo,
I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
Can anybody help me with that problem???
Thanks
Florian
Solved!
Go to Solution.

Hi Andreas,
well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
I suspect that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
Thanks so far
Florian

Urgent : OBIA - Handling multiple Global, Local and Document Currencies

All,
I need input on how to configure multiple currency codes in DAC for OBIA 7.9.6.x
My client's business goes around the the world and with multiple local currencies.They also need reporting currency to be multiple like in Euro, USD etc.
I went through a couple of threads in this forum,like -
Re: Configuring Global Currencies in BI Apps 7.9.6 for EBS 11.5.10 Source
Re: How we are using Global, Local and Document Currencies in DAC.
But I have some confusion regarding the configuration of DAC's 3 Global currency codes.
In order to fulfill my requirement - should I add additional codes in DAC?
Basically How am I supposed to handle multiple Local,Document and Global currencies? And then possible changes in rpd/reports required also?
Regards,
Krish

Currencies are discussed in the Setup and Configuration Guide here:
7.1.1.2 How to Configure Global Currencies
To configure the global currencies you want to report in your warehouse:
In the DAC Client, display the Design view.
For more information about logging into the DAC, see Section A.1, "How to Log Into the DAC Client".
Select a container from the drop down list to the right of the Execute button.
Display the 'Source System Parameters' tab.
Locate the following parameters and set the currency code values for them in the 'Value' box:
$$GLOBAL1_CURR_CODE (for the document currency).
$$GLOBAL2_CURR_CODE (for the local currency).
$$GLOBAL3_CURR_CODE (for the global currency).
Make sure that you spell the currencies as they are spelled in your source OLTP system.
Save your changes.
As far as for PLP items, those are Post Load Processing elements that perform cleanup tasks after the Base Warehouse tables have been loaded. They should never be modified and frankly run without any issues provided the rest of the plan executes properly. Do you have a specific quesiton about a PLP?

Doubt on set locale and translate

Similar Messages

Maybe you are looking for