What causes "report could not be opened for writing . . ." message

"This report could not be opened for writing. Any changes must be saved to a new file." The version is CR 2013 SP1. Win 7 Pro. I'm new to CR and can't figure out why I get this error. I've verified all Windows permissions. It's an SAP error message - not a Windows message. Thanks in advance.
rd

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

Similar Messages

XMP file "system.xmp" could not be opened for writing

hai
i am trying to download OpenSPARCT1 code on to the kit. i am working on linux platform .upto bit gereration it is o.k. but after that in the DV guide it is given like this "Right-click on the microblaze_0_boot loop application and select Mark to initialize BRAMs.,and when i am doing this it is showing the msg asXMP file "system.xmp" could not be opened for writing'.If anybody know the reason please send me.

Hi Rd,
Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
-Abhilash

TP_domain_bd1.pfl could not be open for writing(invalid argument)

Dear All,
I have configure new the transported domin (STMS) and getting an error
TP_domain_bd1.pfl could not be open for writing(invalid argument)
Please suggeest how to salove this problem and i can see this flie there.
Regards,

Hi,
Did you configure the STms Porperly.
Did you Distribut the System
overview -> extras->press distrIbute and activate
Set the Transdir path in the new system
Check the domain controller system is accessiblefrom this system especially
(/sapmnt/trans) and should have read,write permissions
SAP user IDs:
SIDadm
SAPServiceSID
These IDs must be able to have full control of \sapmnt.
Thanks Rishi Abrol

Document could not be opened for editing

Hi,
I'm trying to open Office documents from SharePoint 2010 on Google chrome browser and it throws the below error.
"The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document"

Hi Vinoth,
Thanks for your question. This is the forum to discuss questions and feedback for Microsoft Office client. Since your query is more about operating on SharePoint side, I'm moving it to the dedicated forum for better assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=sharepointgeneralprevious
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

ARXLAAAD.ldt could not be opened for reading

Hi,
I am working on patching an EBS R12.
EBS R12: 12.0.6
OS: IBM AIX on POWER Systems (64-bit)
I have just applied Patch 7828946 and as part of the Patch Post Installation Steps I am suppose to run the concurrent request;
Import Application Accounting Definitions in the source parameter, location of file ARXLAAAD.ldt has to be provided.
When I execute the concurrent request it give error as follows;
/ebs/oracle/app04/apps/apps_st/appl/ar/12.0.0/admin/import/115/import/US/ARXLAAAD.ldt
The file /ebs/oracle/app04/apps/apps_st/appl/ar/12.0.0/admin/import/115/import/US/ARXLAAAD.ldt
could not be opened for reading
Please provide me any pointers or hints.
Thanks

Hi,
The file /ebs/oracle/app04/apps/apps_st/appl/xla/12.0.0/admin/import/115/import/US/ARXLAAAD.ldt
could not be opened for readingPlease verify the path and make sure it is correct.
Also, make sure that the applmgr user has read permission on this directory/file.
Thanks,
Hussein

What does "patch package could not be opened" for 8.3 Adobe Reader

Adobe reader won't open pdf. Tried to uninstall and reinstall Adobe Reader 8 but now get this message when it tries to install. What do I need to do to correct? Can't uninstall(delete) my 8.3 from add/delete programs area. Looks like something is corrupted or missing, but stumped. Help!

Try the Adobe Acrobat and Reader cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html

Error -10810 . the application Finder could not be opened

Hello
I recently (about 2 days ago) updated my early 2008 Mac Pro through the standard software update and since doing so my computer has begun acting like it wants to crawl into a hole and die.
There are a number of issues I have noticed. After using the computer for maybe 10-15 minutes I am no longer able to select any applications from my dock and when trying to access the finder it becomes unresponsive. I can then no longer open any programs and if I am lucky I might be able to close whatever curnent program I am using. Sometimes when I try to open a finder window I get the error message -10810 'The application Finder could not be opened'
for a while I could not empty my trash as well although that now seems to have passed.
image icons for some programs in my dock have vanished but when i hover over the space where the iconused to be the program seems to still be there.
I have no idea when my comptuer might freeze. sometimes it's within 10 minutes and other times it is within 1 minute of starting. It's so bad that since updating my mac 2 days ago I have not been able to shutdown the computer properly and have to hold the power button to turn off.
I have tried doing a disk utility verify and it does not seem to find anything wrong with my hard drive.
can anyone help. It's a pain lugging this thing to my nearest Mac store as I don't have a car.
I am using OSX 10.6.8
thanks

10.6.8 means you don't have a Recovery Mode and all the more reason to use CCC religiously to have bootable backups.
CCC can verify the file integrity of every file
It is harder to verify the integrity of every disk block or sector
10.6.8 does not run on PowerMac and Mac Pro is not one of those anyway (the POWER part is IBM or MOTO/Freescale G-series of computers, Mac Pro is "Intel Xeon Inside")
Overdue to a new boot drive. Never apply updates w/o a clone. Updates have gotten better. Lion or ML would provide more security, drops support for PowerPC and Rosetta though if you have to use older programs.
2008 uses FBDIMMs which even with their ECC can have problems (new FBDIMMs are cheaper, $60 4x2GB, better, run cooler, all of which helps). Garbage in / Garbage Out and same somewhat goes for disk drives too.
A good choice today is a SSD of 120-250GB for system ($90-170) and 1-2TB drive for media and data ($90-160)
And don't rule out your graphic card, still using the OEM 2600xt? 8800GT? good time and reason to upgrade.
Need a newer but not newest? OWC has 2009 4,1 starting at $880 used which are less trouble and handle Mountain Lion better. Yet to see what the requirements will likely be for 10.9 when it comes out later.

I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on

I HAVE COMPLETED SEVERAL IMOVIES AND FINALIZED JUST FINE. NOW I GET THE FOLLOWING MESSAGE FROM MY LATEST PROJECT. "The project could not be prepared for publishing because an error occurred. (File already open with write permission)"! What is going on?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

TS3074 While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?

While trying to download Itunes on my lenovo laptop it tells me in an error box the following : " this installation package could not be opened verify that it exsist or contact the vendor for more info" what did i do?

Perhaps the answer provided for this problem in Microsoft's forums will help.
Good luck.

What action dom i take for this error message "C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences"?

I get this message when I try to download a pdf file from a website.
"C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences."
This is a new error. There used to be no problem.

Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer.

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Crystal Reports VS 2008 "The request could not be submitted for background processing"

Hi,
I am going to try to explain this issue the best I can. Please let me know if you need any other information or have any ideas as I have exhausted my resources. We have an ASP.NET application that has highly formatted crystal reports in them that the users can export as PDFs. All reports export without a problem when the application is run off of our desktops. The reports use a sql server authenticated user, executing stored procedures, and each subreport is linked by the main parameter. We are using Visual Studio 2008 version 3.5 SP1 with Crystal Reports Basic for Visual Studio 2008 on Windows 7 Enterprise SP1. We have designed the reports in Crystal Reports XI Release 2 (11.5.12.1838) and imported them into the ASP.NET application. When trying to export the reports as PDFs from the development or production servers, we get the error message below for some, not all, reports:
System.Runtime.InteropServices.COMException (0x800002AD): Error in File C:\Windows\TEMP\KeyAccountProfile {9FA5C095-77A2-425D-AC6B-8BB66B435336}.rpt: The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
We have cleared the temp directory on the servers before exporting and are still receiving the error. We have installed Crystal Reports Basic Runtime for Visual Studio (10.5.2.0) on both servers. I have identified the underlying issue to one stored procedure/subreport that is causing the report to fail. The weird thing is, when we change the connection to point to development, the stored procedure/subreport runs fine for the report that generates an error when run from production, and the data is the exact same. I have tried rebuilding the subreport but the error still appears even though it runs fine for other reports.
I have been through the document below, and othe similar issues in the forums, but still have not found a resolution. I was trying to use the "modules" application put since this is an ASP.NET application I am unsure of which executable I should be looking at.
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33?QuickLink=index&overridelayout=true&36837934524320
Thanks in advance for your assistance,
Brad Hood
06-26-14
OK.. I did some more investigating on this today. I have found out when I move the sub report that generates the error under another sub report, the sub report in question runs without issue. But when I try and move the sub report that produces the error above any other sub report, the error still generates. Can this get any weirder.... FYI.. there is a total of ten sub reports on this report.

Hi Brad
I'm not sure that Modules would show us anything in this case, so let's try a few other things:
1) Make sure you are using SP 1 for Crystal Reports Basic Runtime for Visual Studio:
Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
2) Seeing as this works on dev, this may be some db inconsistency so enabling the report option "Verify on 1st Print" will be a good idea.
3) Double check the database client and make sure the same client is used on dev and deployed systems. Actually I take back my Modules negative as this is where it may prove useful. Once you have the Modules logs, look at who is loading the crpe32.dll, then look at that process and see the client dlls.
4) Check the printer driver; see if there are any updates. Try a different printer driver.
Ten subreports is not too bad, though not that good either as you are loading the report engine with at minimum 11 simultaneous reports (each subreport is considered to be a report). If a subreport is in a details section and the details section returns a 100 records, you are running 100 + 1 reports. This may lead to memory issues, which may lead to the error.
If I was a betting man, I'd put most of my money on the printer driver (based on your last addition to your post). What ever money I had left would go to some database issue (be it actual data or client related).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (File already open with with write permission)

When I click on finalize project or when I tried to share on Vimeo iMovie goes through this ten hour operation and the, somethime while I'm away from the computer, I get this error message. UNABLE TO PREPARE PROJECT FOR PUBLISHING. The project could not be prepared for publishing because an error occurred. (File already open with with write permission).
This has happened to me before and I can't nail down the particulars of when this happens. I will say I've never been able to Finalize A Project (not even sure what than means) but I have been able to publish short films to YouTube. This current film is a little over an hour and I picked the HD Format. Could the size have something to do with it?

See the discussion here:
https://discussions.apple.com/message/16784714#16784714

What causes "report could not be opened for writing . . ." message

Similar Messages

Maybe you are looking for