What do exactly mean by 'document is lost' while filling setup table

Hi ,
In various threads its mentioned that, while extraction of logistics data .. say sales billing document, the document is 'lost', if its posted/changed while filling setup table . Hence we need to have system downtime while filling setup table. So my questions are as follows :
1)What exactly do u mean by 'Document is Lost'? (I mean the document entries,will always be there in application tables ).
2)Suppose we have DSO in "Over Write" mode at first level (after datasource). Will we need system downtime for filling setup table? (I read n some forum that overwrite mode DSO at first level eliminates the need for system downtime)
Please let me know your opinion on above questions
Regards
Mohit
Edited by: Mohit Gupte on Jan 23, 2010 9:12 AM

Hi Mohit,
1) If document created/changed during filling of setup tables, it will not be available in corresponding extract queue and therefore not be available for delta update. Right?
Sorry ,the answer is 'No' , because if you make any changes at the time of filling the set-up table, then those changes will be captured either in the set-up table or in the extraction queue and hence you will not miss any documents.Condition is ,you have to use 'Queued delta' .If you use 'Direct delta' then you miss the documents becasue of 'no' extraction queue .
All documents are permanently stored in your application tables(VBRK,VBRP etc) always , but at the time of filling the set-up tables these documents will be collected from the application tables and will be moved to set-up table and then the changes will be stored in the extraction queue. At the time of set-up table running,new/changed documents will be stored either in the set-up table or in the extraction queue .So if you follow the correct loading method,you will not miss any documents.
2)However these documents (changed/created during setup run) will be stored in application tables (VBRP & VBRK, in case of sales billing). Hence we can always retrieve consolidated list of such documents , by querying 'CREATED ON'/'CHANGED ON' fields of base tables. Then we can upload these consolidated records, via Full Repair Requests , to BI data targets. So documents are not permanently lost.
Yes. Antyime later you can retrieve the records even if you missed at the time of loading.
Hope it clears your doubts.
Thanks.

Similar Messages

What does it mean by deleting the Content of the setup table when LO cockpi

Hi all:
what does it mean by deleting the Content of the setup table when LO cockpit ? why should we do it? why set up tables ?
Thank you very much!!!
Edited by: jingying Sony on Jun 7, 2009 4:46 AM

Hi Jingying Soni,
Data sources in LO cockpit have a seperate exctraction source during full update mode and delta update mode.
During delta update mode(when an transaction is posted in any particular application - like SD - sales orderm delivery) data is posted in application tables and updated alongside to the update table/extraction queue.
From the extraction queue this data is further transfered to the delta queue using periodic background jobs.The data is then upladed in BW. The delta lad always reads data from this delta queue.
However, when a full load is requested from the BW, the data is sourced by the set up table of the corresponding application.
The setup table is loaded/initalized first. In this initialization process , it reads data frm the corresponding application tables and stores it within this table. Later BW reads from this set up table whenever full/initial load is requested.
The process of filling set up able before full load request frrom BW is called set up run.
Before you run a set up to fill the set up tables you need to check that the set up table is empty.
If it is still containing data that was previously loaded in some other set up run. This data will als get loaded in BW unitinetionally/accidentally.
So, you need to ensure that you only get the intended data in BW. This can be done by proper selections to transfer data from application tale to set up table and from setup table to BW.
Along with this you hae to ensure that the set up table is either empty or you are using a disparate selection in the set up run and BW load which does not overlap with the previous set up runs data.
Hope it helps,
Best regards,
Sunmit.

What is the meaning of "PSEUDO" and "NONE" in v$session table.

Hi
What is the meaning of "PSEUDO" and "NONE" in v$session table.
V$SESSION:
SERVER VARCHAR2(9) Server type (DEDICATED| SHARED| PSEUDO| NONE)
thanks
siva

PSEUDO is the server column's value of killed sessions, until they are cleaned up by PMON.
A dedicated server session will always have DEDICATED as server value, while a shared server session has SHARED when it's active, and NONE when it's inactive.

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

Block document when filling setup table

hi experts :
I have a question about blocking document ,do we have to block the document when filling the setup table and when doing initial extracion both ? or just filling the setup table?this confuess me .
in experiance ,how long will it take to fill the setup table if the total records reaches about 5 million .
thank you in advance
cindy

Hi,
It is recommended to fill the setup table after logging off all the transaction users, preferably during nights (basically you will have to take a down time of the R/3 system). if you have taken a down time then it is not necessary to block documents, since there would be no users posting transactions.
The blocking would be useful if you are trying to fill the setup table during the day time and there is possibility that users could post some documents. However by blocking documents, this would prevent the users from posting / creating documents and this could hamper the normal business (like creating billing documents, orders etc).
if you are doing the filling up at night after taking down time then the approx time could be 1 hour(my guess) again this could depend on the application servers, RAM etc. However if you are trying to do it during the peak hours, i.e when the users are doing transaction(which is not recommended), then it is very difficult to estimate the time.
Assign points if useful.
Regards
Venkata Devaraj

No Free document number range possibility in Setup table filling of Sales roder

Hello
If we have many documents to be reloaded in BW through setup table especially for Sales order / delivery / Invoices datasources, then there is not facility to load selectively by document numbers. One has to specify only ranges ? I dont have ranges , I have scattered document numbers.
Is there any alternate solution for this ?
Regards
Saurabh

Hi Saurabh,
There is a workaround which I am not aware of completely.
A custom Abap program can be written which can take the required sales documents through a flat file load interface which will not require the use of manual input;s for all the documents.
I used this program long time back. It was created by one of our ABAP's teammate.
It will take long time to run but reduces the manual effort.
You can check with your ABAP team if they can create something like that.
Best Regards,
Arpit

What is exact meaning of bellow

Hello friends,
i am purches
BlackBerry OS 5.0.0.973 for 8530 .
i didnt know what is the following property mening of bello what is mean by bellow red color.
Package Version: 5.0.0.1708
Consisting of:
Applications: 5.0.0.973
Software Platform: 4.2.0.463
please clear me.

Please look at a atteched image again.
In the image, you will see the information of the area, perimeter.
so, please check again about the perimeter analysis
Indeed, the perimeter calculations that you appear to be seeing are incorrect. The Particle Analysis perimeter algorithm uses sub-pixel interpolation to calculate the perimeter of the particles. When you have very small particles, or very square shapes, the perimeter calculations loose some of their accuracy. For example, I tested on a rectangle that was 97x80 pixels (actual area = 7760, actual perimeter = 354), and the algorithm returned a perimeter of 350, a much smaller percent error than what you are seeing.
With larger, more irregular objects, the perimeter calculation is mo
re accurate with the interpolation algorithms.
Hope this clarifies the behavior you are seeing.
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

What is exact meaning of the perimeter?

I trouble about the particle information.
In my application, After processed the blob, and
I reported area and perimeter each indexed particle.
but In the first image, the area is 6, and the perimeter is 8.
What happen?
Before I knew, the perimeter is bigger than the area
But the perimeter is bigger in case of small Particle,
(Image 1)
and the area is bigger in case of big particle.
(Image 4)
So, let me know about How can analyze the perimeter in detail.
I attached image files.
Attachments:
Inspection_Images.ppt ‏534 KB

Please look at a atteched image again.
In the image, you will see the information of the area, perimeter.
so, please check again about the perimeter analysis
Indeed, the perimeter calculations that you appear to be seeing are incorrect. The Particle Analysis perimeter algorithm uses sub-pixel interpolation to calculate the perimeter of the particles. When you have very small particles, or very square shapes, the perimeter calculations loose some of their accuracy. For example, I tested on a rectangle that was 97x80 pixels (actual area = 7760, actual perimeter = 354), and the algorithm returned a perimeter of 350, a much smaller percent error than what you are seeing.
With larger, more irregular objects, the perimeter calculation is mo
re accurate with the interpolation algorithms.
Hope this clarifies the behavior you are seeing.
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

What's exact meaning for interface ,and where we use this interface

hi experts,
i have been asked what is interface

Hi
Interfacing is connecting two or more different entities. In our case, it is connecting one or more systems with SAP. Now extending our previous example, you are replacing some legacy applications but there are some applications that you don't want to replace yet. You need to somehow pass data back and forth between SAP and these remaining systems. Data may be going one way or the other way or both ways. You will still need to do some data transformations/translations etc to make the data understandable to the receiving system. This will continue as long as you want to keep the systems running alongside SAP.
In short, conversions are written to load data into SAP onetime. These are typically file based.
Interfaces are written to exchange/update/send/receive data between SAP and other systems on an ongoing basis. These can be in many forms, file based, idoc based, real time(business connector, XI etc are useful in this), xml, and the list goes on.
Reward me if its helpful
Ravi

I am clicking on the Firefox avatar and Firefox will not open I keep getting a UML runner message what does that mean and have i lost my bookmarks as well

I keep getting an XUL runner- it says Error:App:Name not specified in application.ini
== This happened ==
Just once or twice
== firefox was trying to download update and i stopped it firefox is slowing down my computer sometimes ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

What is the meaning of -1 in usersign field of OFPR table

Please send information

-1 represent value that is not assign in SAP.
Basically 1 is for manager...but when u create Database at that time it take as NOT initialized user.
Thanks
Kevin

What is the transaction to fill Setup tables for 2LIS_08TRFKZ

Hello Friends,
I am using OLI8BW setup table transaction for 2LIS_08TRFKZ extractor. Is this transaction correct? Its not just working.
Thanks
Simmi

why don't you go through the menu if you're not sure about the transaction code?
SBIW > Settings for Application-Specific DataSources > Logistics > Managing Extract Structures > Initialization > Filling in the Setup Table > Application-Specific Setup of Statistical Data > LES - Shipment Costs - Carry Out Restructure
then launch it and follow menu
System > Status
it will tell you the transaction code (= VIFBW)

What exactly means "Restore iPhone"

I am using the iPhone 4s with iOS 7.1.2 and I want to restore it. But what it exactly means? Now the lates available iOS is 8.1.1. I bought my iPhone with iOS 7.0.4.
I want to know what exactly happends when I "restore my iPhone" by iTunes. It will restore my iPhone to iOS 7.1.2 - this one which I currently use. Or it will restore my device to previos version of software (7.0.4)? Or it "restore" my device and also update it to 8.1.1?
Please tell me what will happens. I'm asking because I won't to update my device and also don't back to previous soft.
Best Regards,
Pawel

When you restore, your device is erased and the latest version of iOS will always be installed (currently 8.1, not 8.1.1). At the end of restoring, you'll be prompted to load your last backup, or not load a backup (i.e. starting fresh). After that, if you chose to load your backup then all your apps, music, videos, etc. will be re-loaded .... it may take awhile, so give it time and don't unplug or interrupt the process. BEFORE you restore, make sure you initiate a backup to iTunes (not iCloud) and that is normally offered right when you start the restore process -- be sure to do that if you want to recover your settings, accounts, app data, etc.

What do IPSEC mean under Security - AAA - Radius - Authentication

I can't find exact information regarding the IPSec checkbox in Security -> AAA -> Radius -> Authentication.
On the Cisco Wireless LAN Controller Configuration Guide 5.1, it says "Check the IPSec check box to enable the IP security mechanism, or uncheck it to disable this feature.
The default value is unchecked."
What is exactly mean by IP security mechanism?
Does this mean that I can terminate VPN client over my WLC?
Take note that this options appeared even though no crypto card installed in my controller.

This is old code from the Airespace days. There used to be a VPN module that would ride in the WLC. No longer supported, well can't buy it new, but if you had one already...you get the idea.
HTH,
Steve

SCCM 2007 BDP Status Exact Meaning

What are exact meaning of BDP Status below (0,1,2,3,4)
BDP_Status
When
Status = 0
Then 'Healthy'
   When
Status = 1
Then 'Warning'
   When
Status = 2
AND AvailabilityState = 3
Then 'Critical'
   When
Status = 2
AND AvailabilityState = 4
Then 'Very_Critical'
Fazal(MCTS)

Thanks For the Response , sorry for unclear.
Got From our SCCM SQL DB , [dbo].[vSummarizer_SiteSystem] view.
select * from [dbo].[vSummarizer_SiteSystem] then AvailabilityState filed (Column) shows with 0,1,2,3,4 integer result. (above is our query part which we are getting for finding BDP Issue)
and i need to what are those value and meanings ( 0,1,3,4)
Fazal(MCTS)

What do exactly mean by 'document is lost' while filling setup table

Similar Messages

Maybe you are looking for