What do you do if your ipod is disabled and it says plug into itune and when you plug it in to itunes it says the ipod must be unlocked for itunes to work

i need help

Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

HT1937 hello ı have an ı phone 4. 32 gb which ıs my brother brıng from germany from t- mobile but not ı cannot use ıt couse ıt says the phone must be unlocked ... what ıs thıs ??? and what you suggets to me shall ı broke ıt down????

please helpme ı want to use thıs phone...:(( base band ıs 04.11.08... bought from germany but now ın turkey wıth me and ı cannot use ıt:((

phone companys sell phones where they pay some of the price of the phone for you but then
lock the phone to their network
then after 1/2 to 2 years depending on the country you can get it unlocked so you can use it for every gsm network
the only ones who can sim unlock a phone are the ones who sim locked it in the first place in this case tmobile

My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch "iPod touch" because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.

My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

When trying to open iPhoto the computer says: 'The photo library needs to be upgraded to work with this version of iPhoto.' So I click 'upgrade' Then it says: 'You can't open your current photo library using this version of iPhoto.' Etcetera...

When trying to open iPhoto the computer says:
‘The photo library needs to be upgraded to work with this version of iPhoto.’
So I click ‘upgrade’
Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
Etcetera...
What to do??
Theo

Is your Apple Intel-based, poppelmacbook? If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based. Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6. It is upstairs now...for visiting family: games, garage band, etc.--things I never did use. Apple refurbished and purchase the extended warranty. Apple loyalist since late 1980's.

Hi All, I have been using the adobe CS 5.1. What do you recommend upgrade my CS? or get the subscription on a yearly basis, thanks in advance for your input here,

hi All, I have been using the adobe CS 5.1. What do you recommend upgrade my CS? or get the subscription on a yearly basis, thanks in advance for your input here

The decision is ultimately yours. You have to consider your preferences and reasons for use.
If you are using the software primarily for personal projects, then have a suite might be all you need, and the one you have now might suffice for that as well. If you are a professional who needs to be on the cutting edge, then you probably want to have the subscription working for you.
Upgrading to a new CS means getting CS6, which is likely to be that last of the CS releases. If you do that you pay for it one time and what you get when you pay is what you will have until it becomes obsolete somewhere off in the future, except for any corrective updates that might be provided. It should hold up to be useful for some number of years.
If you purchase a Cloud plan, you pay for it repeatedly over time - basically a monthly fee - but you get updates and new features as they are released. There is always a chance that newer updates could eventually out-spec the machine you own, requiring a hardware update to continue on with new releases.

HT201210 my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this

my ipod is disabled and when i connect it to itunes it says that i have to enter my password but i cant because there is no swipe bar so what do i do to fix this?

Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

FaceTime won't accept the password which I wrote down some time ago and doesn't provide a "forgot your password" option. And when I try to create a new account it tells me that my email is already registered. What can I do to revise my password?

Hello Sheila,
Thank you for the details of the issue you are experiencing with FaceTime. It sounds like your Apple ID password is not being recognized.
You can reset your password using the steps in the following article:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
You can contact the Account Security team if you are unable to reset your password using those steps:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful. I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates. However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
Any ideas?

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

My iphoto on my imac somehow updated on its own and now its saying "The photo library needs to be upgraded to work with this version of iPhoto." have i lost my photos?

I tried to open my iphoto last night on my iMAC and it somehow updated on it's own and now has a message saying "The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete." I only have the option to quit or upgrade. What does this mean? Have i lost my pictures? i don't properly have my back up hard drive set up so all my pictures aren't backed up.

"The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete."
After your iPhoto application got updated to a new version, iPhoto will convert the iPhoto library to a new format, that is used by the new version. The warning tells you, that after this upgrade older iPhoto versions will no longer be able to read the iPhoto library. If you have a second Mac with older software that might be important. Make a backup to be on the safe side and let iPhoto upgrade the library.

My macbook suddenly shut down, and when rebooted, imovie project was completely gone. No record of it at all. Have been working on it for days, and it has always been there. Any way to restore it? Thanks.

My macbook suddenly shut down, and when rebooted, imovie project was completely gone. No record of it at all. Have been working on it for days, and it has always been there. Other projects are still there. Any way to restore it? Thanks.

I figured it out!!!
Hey guys! Here's what I did that saved my project.
-SHORT VERSION-
Use the Finder window on your Mac to copy and paste your old project (the one not showing up in imovie) to a new folder so that iMovie will see it.
-LONG VERSION-
CONDITIONS:
The project has to exist on your hard drive. To see if it's hiding around somewhere go to:
Home (your name)>Movies>iMovie Library (right click and select Show Package Contents)
In the iMovie Library folder (the default is usually the date) open it to see if your Project is inside. If it is, you are in luck!
RESTORING PROJECT:
Open iMovie
start a new folder under the iMovie Library (again, the default is usually todays date)
Close iMovie
In the finder window (as explained above in the CONDITIONS section) select the files and folders of your project and copy them (in my case these consist of folders called Analysis Files, Original Media, "MYPROJECT", Render Files, Shared Items)
There should now be a folder with today's date in that Show Package Contents folder.
Paste a copy of your project;s files into this folder.
When it is done copying, open up the "Original Media" folder and all of your images and clips should be present.
reopen iMovie. Your project should show up in the Libraries list.
*If your full project isn't showing in the iMovie timeline (mine just had empty bubbles where all my clips and audio should be) try dragging and dropping the clips and images from the project's "Original Media" folder into the import section of your project. Once the files were reimported, iMovie recognized them all and put them back in the correct place for me.
Hope this helps someone!

My 160 g ipod classic wont synk past 4 gigs and when it gets to 4 gigs it erasis all the content a message unknown error occurd (13011)

my 160 g ipod classic will not sync past 4 gigs and when it gets to 4 gigs it erasis all the content a message unknown error occurd (13011) i have formated it with windows and restored it several times nothing works should i toss it and buy a new one or is it me doing somthing wrong

Thanks everyone, lots of good suggestions here.
I did briefly consider trying the idea of grouping smaller loads of playlists to upload, but I also noticed that each time I ejected then re-synched the iPod a few more gigs of music would upload.
So I just kept at it until most (nearly all) of my music made it onto the thing.
This seems like a really rudimentary thing for Apple to fix - but more fundamentally, this shouldn't happen at ALL. When they market a new product, having such a basic issue plague it seems very Microsoft-like.
Up to this point I've never been disappointed with anything Apple has ever done.
This issue is purely and simply bad design and slipshod programming. I hope they fix it in the extremely near future.
Thanks again for all your help and suggestions guys!
Cheers
Dex

Libgcc_s.so.1 must be installed for pthread_cancel to work

Hello,
when starting cjackctl or any jack-dependant application i'm getting this error :
libgcc_s.so.1 must be installed for pthread_cancel to work
i have 32bit gcc libs installed from multilib due to wine dependencies, but i think jack is also 32bit anyway.wine is working with sound.
i am on 64bit system.
thanks.

Hey Stythys did you ever get this fixed. I am having the same issue and I can't seem to figure out what it may be.
I have removed/purged gcc and the and build-essentials but to no avail.
btw, I have ubuntu, it's just that this is the first place I can find that someone else is having the same issue as me.

I forgot my iphone's password and it is disabled now because i tried so many times to open it. Now it's saying "your iphone is disabled and connect to itunes" i connected it to itunes and clicked restore.

I forgot my iphone's password and it is disabled now because i tried so many times to open it. Now it's saying "your iphone is disabled and connect to itunes" i connected it to itunes and clicked restore. How long will it take for my phone to restore? Is it gonna be 24 hours?

It appears like there is maintenance or something affecting the iTunes server today. I recommend giving it a few hours and trying again. It shouldn't take that long to restore but from what I hear, there is definitely something going on with the iTunes server today.

I will be travelling abroad but use time machine and modem at home. Do I need to leave these switched on while away for iCloud to work?

I will be travelling abroad but use time machine and modem at home. Do I need to leave these switched on while away for iCloud to work?

No. iCloud has nothing to do with Time Machine on your computer, and as long as your computer has synched all desired content and settings to iCloud, not only does the modem not need to be switched on, your computer doesn't need to be on either.
Regards.

What do you do if your ipod is disabled and it says plug into itune and when you plug it in to itunes it says the ipod must be unlocked for itunes to work

Similar Messages

Maybe you are looking for