What do you do when you ipod is frozen?

what are you suppose to do when your ipod freezes?

Try resetting it. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display:
iPod isn't responding it appears to be frozen

Similar Messages

  • What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)

    What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • What do I do when my iPod touch wants me to plug into iTunes and asks for a password on the iPod touch and can't do it?

    What do I do when the iPod touch asks to be plugged into it ouch and nothing happens. The PC asks to use password on iPod touch and it can't be done.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • What info is lost when restoring ipod touch to factory settings? games?

    what info is lost when restoring ipod tocuh to factory settings? games?

    Philly_Phan wrote:
    What do YOU think that "factory settings" means?
    Not quite, because you can still redownload all your purchased apps and music.  And everything that is synced from applications on your computer such as your calendar and your contacts can be resynced.

  • What does it mean when your ipod is in recovery mode and how do I solve this problem

    What does it mean when your ipod is in recovery mode and how do I solve this problem?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • What do I do when my ipod shows me the white apple logo but doesn't start?

    what do I do when my ipod shows me the white apple logo but dosent start? by the way it ran out of battery but when I plug it in this happens.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What do I do when my iPod classic locks up

    What do I do when my iPod classic locks up?

    Reset the iPod.
    To do this, turn the Hold switch on, then off again and press-and-hold both the Menu and the Select (centre) buttons together for at least ten seconds. You may need to try this a couple of times for it to work.
    If it still doesn't fix it, try the 5Rs procedure, which is explained in the following article; http://www.apple.com/support/ipod/five_rs/classic/

  • What does it mean when the ipod is diabled and says connect to iTunes

    what does it mean when the ipod is diabled and says connect to iTunes

    It means...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • HT1212 What do I do when do ipod screen goes white

    What do I do when do ipod screen goes white

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • What do I do when my ipod doesnt turn on?

    What do I do when my Ipod Touch doesn't turn on? It was on charge all day when i was at school, when i came home it wouldn't turn on. What should i do?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    It the future use normal font. It is hard to read the large, bold font

  • What can i do when my ipod 5 has problem with icloud ?, what can i do when my ipod 5 has problem with icloud ?

    what can i do when my ipod 5 has problem with icloud ?

    No idea, as you make no mention at all of what the problem is.

  • HT1222 What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

    What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

    . . . sparse bundle could not be accessed (error -1)

  • What can i do when my ipod will not turn on?

    what can i do when my ipod touch will not turn on?

    Try here:
    iOS: Not responding or does not turn on

  • What can i do when my ipod say no wi fi and i cant click on it

    what can i do when my ipod say no wi fi and i cant click on it

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • What can i do when my ipod screen goes white and i cant see anything?

    Please! Somebody give me some advice on what to do when my ipod is white and i cant see anything? i can listen to music but i cant see what i am listening to?

    If none of the usual 5 R's of troubleshooting do any good, you'll need to have the iPod either serviced or replaced as the LCD screen or ribbon cable is damaged or faulty.
    http://www.apple.com/support/ipod/five_rs/nano3gen/
    B-rock

Maybe you are looking for

  • Issue in 7.3 - The Work area is not long enough

    Hello All, currently i am facing issue in my new BI 7.3 server when i try to execute planning sequence, i am getting the below error: We have recently moved from 7.0 to 7.3 version very recently and when i try to execute the planning seq it raises ab

  • HOW CAN I HAVE TWO MONITORS ON R6870 HAWK?

    hi all ... i just bought a 6870 hawk card and have 2 monitors a wide 22" and a 4:3 19" with d-sub connections ... up to now i had them connected to an ati 4890 through d-sub to dvi adaptors no problems ..... and now as i understand it i cannot use th

  • How to get Long text in report from FBL3N

    Hi, I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?

  • Installing Oracle 8i 8.1.5 on RedHat 5.1

    Hello, 1) All I should need to do to start the Installer is: a) Download JRE 1.1.6 v5 from blackdown b) Create a link to jre/bin/jre as /usr/local/jre c) Run the installer ./runInstaller 2) Nothing happens after doing the above, do I need to have jdk

  • How to view change documentation for settlement variants in CJ8G

    One of my settlement jobs did not run and I am trying to see what was populated in it...I have already changed the variant and I am currently settling new projects using that variant.  Is there any way to look at what was populated in the variant dur