What formula to add up the values in one column only if a box is checked in the next column?
Hi guys,
I am creating a spreadsheet for my wedding guestlist.
In one column I have a number to tell me the total number of adult guests the party (e.g fried and girlfriend = 2) and then the next two colums are check boxes, one for daytime and the next for nighttime.
What I would like to do is in a footer row under the daytime time checkbox column is to total the first colum (the total number of wedding guests in each party).
I hope that I am explaining this ok, sorry if it is vague.
I understand to use COUNTIF to total the number of checked boxes in the column and have been working on COUNTIF + the sum of the previous column but it's not really working.
Any help will be greatly appreciated.
Thanks,
Phil
Phil,
Here's an example of what you might do:
The expression in the footer of column B is:
=SUMIF(B, TRUE, $A)
and, the expression in the footer of column C is:
=SUMIF(C, TRUE, $A)
Regards,
Jerry
Similar Messages
-
what formula in numbers can I use when I want to know how much 19 % is of the numbers from (let's say) e6 up to e27 ? thank you
thanks a lot jerry.
Can I ask you another question?
it works well but it gives me a number like 14,567
and I would like it if it will automatic round up an give me the number 15 in this case.
I do know the seperate folmula to round up numbers but can I combine the two formula's ?
thank you and bye bye -
How to get the value in one JSP page to another?
Hi,
I have problems in passing the value around in JSP. I have two JSP pages as below:
test1.jsp
I try to get the vaule from my textbox by using:
String strUser = request.getParameter ("strUserName");
Then i print out by using: out.print(strUser); then i can get the value and put on my page (For example, i get ABC on my page).
test2.jsp
Next, i want to get the value from strUser (which mean that the one i already display on page in test1.jsp, ABC) to insert into my table by using INSERT INTO statement. Then i try by using
String strUser1 = request.getParameter ("strUser");
Is it possbile for me to do that? I cannot get anything to insert into my table. Then i tried out.print(strUser1); then i found that i get NULL value.
Could you please give me some guidance?
Thanks you very much for any advise you may give me.
KimsanHi,
Thank you very much for your help. It's working fine if i just get a one value to another page, however, i have problem while i pass the value in my loop to another page because i always get the last record. I try with the following code:
logged_page.jsp
<html>
<head>
<title>Welcome to the online Auction...</title></head>
<body>
<%@ page language ="java" import = "java.io.*, java.lang.*, java.sql.*" %>
<% try
String strUsername = request.getParameter("username");
session.setAttribute("myUserName", strUsername);
String strPassword = request.getParameter("password");
Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
Connection myConn = DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=C:/Auction/Auction.mdb");
String strSQL = "SELECT [UserName], [Password] FROM tblUserDetails where [UserName] = ? and [Password] = ?";
PreparedStatement statement = myConn.prepareStatement(strSQL);
statement.setString(1, strUsername);
statement.setString(2, strPassword);
ResultSet myResult = statement.executeQuery();
if(myResult.next())
//out.println("Login Succesful! A record with the given user name and password exists");
out.print("<center><h1>");
out.print("Welcome ");
out.print(strUsername);
out.print("</h1></center>");
out.print("<center>");
out.print("<BR><BR>");
out.print("<font font face = Viner Hand ITC size= 5>Products on sales</font>");
out.print("<BR><BR>");
Statement myStatement = myConn.createStatement ();
ResultSet myResult1 = myStatement.executeQuery("SELECT * FROM tblProduct");
ResultSetMetaData myResultSet = myResult1.getMetaData();
out.println("<font face=Tahoma>");
out.print("<table border=1 CELLSPACING=0>");
out.print("<TR>");
out.print("<TD width = 200> Item Title");out.print("</TD>");
out.print("<TD width = 200> Description");out.print("</TD>");
out.print("<TD width = 200> Current bid");out.print("</TD>");
out.print("<TD width = 200> Available Time");out.print("</TD>");
out.print("<TD width = 200> Place Bid");out.print("</TD>");
out.print("</TR>");
out.print("</table>");
while(myResult1.next())
String strProName = myResult1.getString(1);
session.setAttribute("myProName", strProName);
out.print("<table border=1 CELLSPACING=0>");
out.print("<TR>");
out.print("<TD width = 200>");
out.println(strProName);
out.print("</TD>");
out.print("<TD width = 200>");
out.println(myResult1.getString(3));
out.print("</TD>");
out.print("<TD width = 200>");
out.println(myResult1.getString(2));
out.print("</TD>");
out.print("<TD width = 200>");
out.println(myResult1.getString(4));
out.print("</TD>");
out.print("<TD>");
out.print("<form action=bid_page.jsp method=post>");
out.print("<input type=text name=place_bid>");
out.print("<input type=submit name=okfunc value=Bid>");
out.print("</TD>");
out.print("</form>");
out.print("</TR>");
out.print("</table>");
out.println("</font>");
out.print("</center>");
else
out.print("<center>");
out.print("Sorry ");
out.print("<font color = RED size = 5>");
out.print(strUsername);
out.print("</font>");
out.print(" could not be found.");
out.print("</center>");
myResult.close();
statement.close();
myConn.close();
catch(SQLException e)
out.println(e);
%>
</body>
</html>
bid_page.jsp
<HTML>
<HEAD>
<TITLE>Welcome to the online Auction...</TITLE>
</HEAD>
<BODY>
<%@ page language ="java" import = "java.io.*" import = "java.lang.*" import = "java.sql.*" %>
<% try
String thisUserName = (String) session.getAttribute("myUserName");
String thisProName = (String) session.getAttribute("myProName");
Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
Connection myConn = DriverManager.getConnection("jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=C:/Auction/Auction.mdb");
PreparedStatement myStatement = myConn.prepareStatement("INSERT INTO tblHistory VALUES ('"+thisUserName+"', '"+thisProName+"', '"+request.getParameter("place_bid")+"')");
myStatement.executeUpdate();
myConn.commit();
myStatement.close();
myConn.close();
catch(Exception e){}
%>
</BODY>
</HTML>
When i click on the BID button in the logged_page.jsp then i always get the last record and save into my table and that is not what i want to. i want to get the result on the same row as the BID button that just click and save to my table.
Could you please advise?
Thanks you very much for your time and any consideration you may give me.
Best Regard,
Kimsan -
How I can display the values in one row when they come from the same colum
This query
SELECT
sorints_ints_code
FROM
saturn.sorints a,
connman.cc_adm_prospect_master
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = prospect_pidm
give me the results of
ZA
ZB
ZC
I want to use this query in a cursor to update a column in another table, the problem is that I need to update the table concatenating the values ZA,ZB,ZC
I have 24 different codes stored in the column sorints_ints_code, so I don’t want to use 24 different cursors and I don’t to use cross reference, It is there any way that I DON’T know to display the data like this za,zb,zc without using cross reference, I don’t want to use the table 24 times…
Like THIS, this is only for two values…
SELECT
a.sorints_ints_code,
b. sorints_ints_code
FROM
saturn.sorints a,
saturn.sorints b
connman.cc_adm_prospect_master
WHERE
a.sorints_ints_code = ‘ZA’
AND a.sorints_ints_code = ‘ZB’
and a.sorints_pidm = prospect_pidm
and b.sorints_pidm = prospect_pidm
REMEMBER, I have 24 different values
I am trying to write a procedure like this;
Someone suggest this v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
BUT IT IS NOT WORKING!!!
PROCEDURE prospect_coach_interest_upd
p_prospect_term_code IN srbrecr.srbrecr_term_code%TYPE,
p_prospect_admin_err_code OUT VARCHAR2,
p_ora_err_code OUT NUMBER,
p_ora_err_msg OUT VARCHAR2
) IS
v_out_path VARCHAR2(40) := '/home/connman/student';
v_out_file VARCHAR2(40) := 'cc_adm_prospect_'||p_prospect_term_code||'_'||TO_CHAR(SYSDATE,'YYYYMMDDHH');
v_file_handle UTL_FILE.FILE_TYPE;
v_pidm NUMBER;
v_int_code1 varchar2(30);
v_int_code2 varchar2(2);
v_int_code3 varchar2(2);
CURSOR cur_pidms IS
SELECT prospect_pidm
FROM connman.cc_adm_prospect_master
WHERE prospect_term_code = p_prospect_term_code
FOR UPDATE;
CURSOR interest_coach_cur is
SELECT
sorints_ints_code
FROM
saturn.sorints
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = v_pidm ;
interest_coach_rec interest_coach_cur%ROWTYPE;
BEGIN
UTL_FILE.FCLOSE_ALL;
v_file_handle := UTL_FILE.FOPEN (v_out_path, v_out_file, 'a');
UTL_FILE.PUT_LINE (v_file_handle,
CHR (10) || TO_CHAR (SYSDATE, 'DD-MON-YYYY HH:MI:SS')
UTL_FILE.PUT_LINE (v_file_handle, 'Entering the Admin Name procedure.');
--- BEGIN
FOR rec_pidms IN cur_pidms
LOOP
EXIT WHEN cur_pidms%NOTFOUND;
v_pidm := rec_pidms.PROSPECT_pidm;
v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
IF interest_coach_cur%ISOPEN
THEN
CLOSE interest_coach_cur;
END IF;
OPEN interest_coach_cur;
FETCH interest_coach_cur
INTO interest_coach_rec;
IF interest_coach_cur%FOUND
THEN
UPDATE
connman.cc_adm_prospect_master
SET
PROSPECT_COACH_INTEREST = interest_coach_rec.sorints_ints_code
WHERE CURRENT OF cur_pidms;
END IF;
END LOOP;
COMMIT;
p_prospect_admin_err_code := '0';
UTL_FILE.put_line (v_file_handle, 'Successful Completion.');
EXCEPTION
WHEN OTHERS
THEN
p_prospect_admin_err_code := '1';
p_ora_err_msg := SUBSTR (SQLERRM, 1, 2000);
p_ora_err_code := SQLCODE;
END; -- prospect_coach_interest_upd;Search in the forum or web you will find many solutions
Return multi-row result as one comma-delimited row
http://www.oracle-developer.net/display.php?id=412 -
How we can get the values from one screen to another screen?
hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).
-
How to get all the values in one column of a JTable
How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.
-
Passing the values from one pgm to another pgm (Calling pgm has no sel scr)
Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.RExport your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'. -
To Get the value of a node in a XML file which is outside the envelope
Hi Everyone,
I am uploading data in a XML file into Oracle tables. I am using oracle 9i release 2. How to get a value of a node outside the envelope.
Here is my xml file.
<Response>
<TaskNo>14</TaskNor>
<ZoneResponse>
<GetServiceStatusResponse xmlns="http://mws.zonemws.com/Shipment/2010-10-01/">
<GetServiceStatusResult>
<Status>GREEN</Status>
<Date>2011-06-03</Date>
</GetServiceStatusResult>
<Metadata>
<Id>c9488a06</Id>
</Metadata>
</GetServiceStatusResponse>
</ZoneResponse>
</Response>
This is the response xml we are getting from the supplier. I do want to store all the values in an oracle table, including TaskNo(14). TaskNo is the main value
here. I am using dbms_xmlparser and dbms_xmldom in PL/SQL. I am able to get the values inside the envelope, but not the outside(taskno). It is not showing any errors. It is processing all
other values. I Posted this in the XML DB section also. Please help me to solve this issue. Any help,tips and suggesstion will be highly appreciated. Thanks in advance
--VimalHi,
I am providing some additional info like procedure, table structure and sample xml file so that you can get a clear idea about my problem and help me.
My Procedure
PROCEDURE xml_upload (
p_directory IN VARCHAR2,
p_server_directory IN VARCHAR2,
p_filename IN VARCHAR2
AS
l_bfile BFILE;
l_clob CLOB;
l_parser DBMS_XMLPARSER.parser;
l_doc DBMS_XMLDOM.domdocument;
l_noderowset DBMS_XMLDOM.domnode;
l_noderow DBMS_XMLDOM.domnode;
l_nodecount NUMBER;
l_Resultlist DBMS_XMLDOM.domnodelist;
l_request_id VARCHAR2 (300);
l_task_number NUMBER;
l_tasknum_list DBMS_XMLDOM.domnodelist;
l_service_list DBMS_XMLDOM.domnodelist;
l_time_list DBMS_XMLDOM.domnodelist;
l_tasknode DBMS_XMLDOM.domnode;
l_servicenode DBMS_XMLDOM.domnode;
l_temp VARCHAR2 (1000);
l_table_name VARCHAR2 (100);
l_cmd_execution VARCHAR2 (1000);
l_orig_file_with_path VARCHAR2 (1000);
l_dest_file_with_path VARCHAR2 (1000);
l_status custom.task_status.status%TYPE;
l_time custom.task_status.timestamps%TYPE;
l_rows NUMBER;
l_message SYS.XMLTYPE;
l_return_status NUMBER;
TYPE tab_type IS TABLE OF custom.task_status%ROWTYPE;
t_tab tab_type := tab_type ();
PROCEDURE write_exception (
p1_filename VARCHAR2,
p_comments VARCHAR2,
p_rows_created NUMBER
IS
BEGIN
read_xml_file (p_directory, p_filename, l_message, l_return_status);
-- Convert the xml to a clob
l_clob := l_message.getclobval();
-- Create a parser.
l_parser := DBMS_XMLPARSER.newparser;
-- Parse the document and create a new DOM document.
DBMS_XMLPARSER.parseclob (l_parser, l_clob);
l_doc := DBMS_XMLPARSER.getdocument (l_parser);
-- Free any resources associated with the CLOB and Parser
-- dbms_lob.freetemporary(v_clob);
DBMS_XMLPARSER.freeparser (l_parser);
l_noderowset :=
DBMS_XMLDOM.item
(DBMS_XMLDOM.getchildnodes (DBMS_XMLDOM.makenode (l_doc)),
0
l_nodecount :=
DBMS_XMLDOM.getlength (DBMS_XMLDOM.getchildnodes (l_noderowset))
- 1;
t_tab.EXTEND;
FOR i IN 0 .. l_nodecount
LOOP
l_noderow :=
DBMS_XMLDOM.item (DBMS_XMLDOM.getchildnodes (l_noderowset), i);
l_Resultlist :=
DBMS_XMLDOM.getelementsbytagname
(DBMS_XMLDOM.makeelement (l_noderow),
'RequestId'
l_request_id :=
DBMS_XMLDOM.getnodevalue
(DBMS_XMLDOM.getfirstchild
(DBMS_XMLDOM.item (l_Resultlist,
0
END LOOP;
FOR i IN 0 .. l_nodecount
LOOP
l_noderow :=
DBMS_XMLDOM.item (DBMS_XMLDOM.getchildnodes (l_noderowset), i);
l_service_list:=
DBMS_XMLDOM.getelementsbytagname
(DBMS_XMLDOM.makeelement (l_noderow),
'Status'
l_status:=
DBMS_XMLDOM.getnodevalue
(DBMS_XMLDOM.getfirstchild
(DBMS_XMLDOM.item (l_service_list,
0
l_time_list:=
DBMS_XMLDOM.getelementsbytagname
(DBMS_XMLDOM.makeelement (l_noderow),
'Timestamp'
l_time:=
DBMS_XMLDOM.getnodevalue
(DBMS_XMLDOM.getlastchild
(DBMS_XMLDOM.item (l_time_list,
0
END LOOP;
select
extractvalue(column_value,'/Response/TaskNumber') into l_task_number
from
table(xmlsequence(xmltype('<Response>
<TaskNumber>14</TaskNumber>
<ZoneResponse>
<GetServiceStatusResponse xmlns="http://mws.zoneaws.com/InboundShipment/2010-10-01/">
<GetServiceStatusResult>
<Status>GREEN</Status>
<Timestamp>2011-06-03T22:17:17.313Z</Timestamp>
</GetServiceStatusResult>
<Metadata>
<RequestId>c9488a06-73c6-474e-b356-51d5f8feec00</RequestId>
</Metadata>
</GetServiceStatusResponse>
</ZoneResponse>
</Response>
t_tab (t_tab.LAST).status:= l_status;
t_tab (t_tab.LAST).timestamps:= l_time;
t_tab (t_tab.LAST).amz_request_id:= l_request_id;
t_tab (t_tab.LAST).tasknumber:= l_task_number;
-- Insert data into the real Staging table from the table collection.
FORALL i IN t_tab.first .. t_tab.last
INSERT INTO custom.task_status VALUES t_tab(i);
COMMIT;
DBMS_XMLDOM.freedocument (l_doc);
DBMS_LOB.freetemporary (l_clob);
DBMS_XMLPARSER.freeparser (l_parser);
DBMS_XMLDOM.freedocument (l_doc);
DBMS_LOB.freetemporary (l_clob);
DBMS_XMLPARSER.freeparser (l_parser);
DBMS_XMLDOM.freedocument (l_doc);
END rrs_xml_upload;
Sample File:
<Response>
<TaskNumber>14</TaskNumber>
<ZoneResponse>
<GetServiceStatusResponse xmlns="http://mws.zoneaws.com/InboundShipment/2010-10-01/">
<GetServiceStatusResult>
<Status>GREEN</Status>
<Timestamp>2011-06-03T22:17:17.313Z</Timestamp>
</GetServiceStatusResult>
<Metadata>
<RequestId>c9488a06-73c6-474e-b356-51d5f8feec00</RequestId>
</Metadata>
</GetServiceStatusResponse>
</ZoneResponse>
</Response>
Table: task_status
tasknumber number,
status varchar2(100),
timestamps varchar2(100),
requestid varchar2(100)
all I want is to populate the data from xml file to the particulare table. I can do that with the above procedure.
But In this below mentioned part of my procedure , I want to pass the file name instead of giving the entire content.
select
extractvalue(column_value,'/Response/TaskNumber') into l_task_number
from
table(xmlsequence(xmltype('<Response>
<TaskNumber>14</TaskNumber>
<ZoneResponse>
<GetServiceStatusResponse xmlns="http://mws.zoneaws.com/InboundShipment/2010-10-01/">
<GetServiceStatusResult>
<Status>GREEN</Status>
<Timestamp>2011-06-03T22:17:17.313Z</Timestamp>
</GetServiceStatusResult>
<Metadata>
<RequestId>c9488a06-73c6-474e-b356-51d5f8feec00</RequestId>
</Metadata>
</GetServiceStatusResponse>
</ZoneResponse>
</Response>
Alex or any other oracle pl/sql experts please help me to solve this issue.
FYI : I am using Oracle 9.2.0.8.0
Thanks,
Vimal..
Edited by: Vimal on Jun 13, 2011 4:10 PM -
Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
MrudualaYou are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo -
How do we update the value of a textfield in a dialog box by clicking a button/ textbutton ?
Hi,
If you create a function to return wwctx_api.get_user you could
call this inside an update trigger, you could put in an
exception to return USER if there is an error, this would then
work for users connected directly and users using Portal.
Regards Michael
e.g.
CREATE OR REPLACE FUNCTION F_PORTAL_USER RETURN VARCHAR2 IS
vRet VARCHAR2(50) := wwctx_api.get_user;
BEGIN
RETURN(vRet);
EXCEPTION
WHEN OTHERS THEN
RETURN (USER);
END F_PORTAL_USER; -
How to change the value from one input control to another input control?
Hi Experts,
I want to change the value from one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
Here I attached screen shot.Please help me for thisHi,
It is not possible to have Input controll in all tabs that will be set from another .
But There is one workaround .
Follow the link below .
http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/ -
My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
i am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and its the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that doesn't solve it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
When click the email icon on my iphone, it opens on one email only. I can not go to the next or previous email, a different email or anything. It only gives me the option to move that email! How can I stop this. Its been working perfectly well before!
Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
Settings>General>Reset>Reset all Settings
If that does not work try to re add the account
Last but not least, restore as new.
Hope that helps. -
I have problem syncing my music to ipad. Most of the songs are duplicated but only in ipad. I checked the music library in itunes and there didn't have the duplicated songs like in the ipad. I can not delete the duplicated songs inmy ipad.
Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.
Maybe you are looking for
-
My ipod shuffle 4th doesn't connect to itunes or windows, what can I do?
hello, it's been like 2 weeks since I did the update of itunes and everything to get my ipod shuffle 4th generation, and also did all the troubleshooting from the apple page, and nothing happens. It doesn't connect to itunes or windows. anyone of you
-
Thunderbolt to FireWire adaptor/Bad connection?
Has anybody had the same matter as I have? Please let me know! 'Thunderbolt to FireWire Adaptor' I bought doesn't properly fit in the Thunderbolt socket of my Macbook Air (that Thunder mark on it). It does a half of it and doesn't go deeper. I'm sure
-
Nesting JSF components in a custom component
I'm creating a new JSF custom component. my component needs to include an input text and a list box. my question is : how do I add these components to my JSF component ? I want to use to JSF component to render them rather then encoding the HTML myse
-
Query Regarding Documentation in Solution Manager
Solution Manager Library says that when we do any configuration or testing ,automatically the document(Configuration Document or Test Script) gets generated.Can we have an Overview of how Solution Manager handles Documentation.If Automatic Documentat
-
JDBC load balancing with non RAC replicated instances
Hi, The thin JDBC load balancing feature only works with RAC clusters or it can be used with two non RAC replicated instances using the same service name? Thanks, Ezio.