What has changed in the new XFi drivers vs the be

Before I go out to get myself a pair of new spectacles (or rather, go do LASIK), is there anything that is actually changed between the beta and the new release? I have been looking at the features and known limitations between the new and the beta, and really can't see any differences there.......

Bilux wrote:
nothing :smileyvery-happy:
No, don't be like that. They changed the revision numbers at least. :smileyvery-happy:?The executable is?also a slightly?larger size. The lack of a change log is very fishy.

Similar Messages

My username (email address) has changed. Apps that I purchased with the old username ca not be updated as the password from the old username no longer works and apple can not send me info to an addres that no longer exists. What can I do?

My username (email address) has changed. Apps that I purchased with the old username ca not be updated as the password from the old username no longer works and apple can not send me info to an addres that no longer exists. What can I do?

Try here...
Frequently Asked Questions About Apple ID

I have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing

i have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing my contact lists and purchased apps?

okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed. Where do i find the backed up info from my phone?

I just replaced my broken iphone with a replacement. Now when I try to sync my audiobook library i get a warning that all of my music, etc will be deleted. I can drag and drop but it's a pain in the ***. What has changed?

just replaced my broken iphone with a replacement. Now when I try to sync my audiobook library i get a warning that all of my music, etc will be deleted. I can drag and drop but it's a pain in the ***. What has changed?

Click: Restoring your iTunes Library backup (from an external drive) here > iTunes: Back up your iTunes library by copying to an external hard drive
BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My mac book air no longer supports the audio speakers on my panasonic tv when playing movies? what has changed in the last week for this not to work any more?

I used to be able to plug my mac book air to my tv via mini dvi to hdmi cable to tv and watch movies.
The audio no longer projects through the tv? in system preferences, sound, driver for sound output is not supported for my panasonic tv.
Just a couple weeks ago this was not a problem. I just plugged in my computer to the tv and it worked. what has changed?

Have you tried a PRAM reset?
http://support.apple.com/kb/HT1379
Ciao.

What has changed in the B1iC for 8.81?

Hi guys
Does anyone know what has changed, or is there some documentation floating around, with the B1iC Dashboards in 8.81.
I had managed to get everything up and running on my laptop running 8.8, I have since upgraded to 8.81 PL02 and the dashboards don't want to run, the services all appear to be running etc.
I've noticed for example, on the Cockpit tab of the General Settings you dont have the URL input box anymore, surely this has got to somewhere?
Can someone please point me in the right direction
Many thanks
Hayden

Frank, thanks for the reply and the info.
However, I'm having trouble getting this resolved.
SAP Note 1549532 appears to provide more useful information - however it looks like you need a PhD in computer science to actually understand the SAP instructions and and find the data needed even for the temporary workaround.
Sadly I fear that if you are not a IT professional you will not be able to do this, I will have to wait until SAP release further documentation or the patch they talk about to make this work again so I can demo it.
Thanks again
Hayden

HT201335 What has changed regarding watching youtube on my apple tv from my iphone and macbook pro in the past month or two?

In the past month, I have stopped being able to play youtube content to my apple TV from my iphone - I can only get audio to play, and no video. When I activate mirroring, the video quality is much worse than it ever was before. Additionally, there is no option to play any content from youtube to my apple tv from my macbook. What has changed?

The native Youtube app was removed in IOS 6. You would have had to download the official 3rd party app, which has not been enabled for airplay. This is up to the developer to do.
The only way to do stream Youtube content from laptop to Apple TV natively is through Airplay mirroring, which requires a recent (2011 or later) model running Mountain Lion. The alternative is going through software, Airparrot.

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich/

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?

The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Assistance with the installation process is available on this linked forum.

Disk Utility: Does it work or not? What has changed?

Hello:
After upgrading just about five hours ago to Leopard, and applying all upgrades and updates as well as security updates, I have noticed that Disk Utility is not th same snappy piece of software it used to be.
In Tiger, I used to run Disk Utility every time there was an upgrade or update and it took usually from less than a minute to sometimes a couple minutes. This time I get the bar immediately stating a 'less than a minute' operation but it results in something about 10 or more minutes.
It would be great if anyone from Apple or even someone with Technical information would post why is this, and what has changed with Disk Utility and how can we make sure that new permissions are fixed when the new Disk Utility can't do so. Like in my case I receive the following after the long wait.
+Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.+
+Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.+
+ACL found but not expected on "Applications".+
+ACL found but not expected on "Library".+

On my Mac it normally runs fine and fast. The SUID errors your getting are harmless. See this.
Apple OS X 10.5: Disk Utility's Repair Disk Permissions reports a permissions issue with ARDAgent
If they bother you run the Mac OS X 10.5.1 Update again. It got rid of all mine when I did this.

What has changed for OLAP Universe in BOXI3.1 SP2

All,
I would like to understand what has changed in BOXI3.1 SP2 in comparison with BOXI3.1 base version for OLAP universes.
We design Universe on top of MSAS 2005 cubes and create webi reports.
Based on BOXI3.1 SP2 what's new document- the enhancements seem to affect the Universe Designer- providing a developer with more control and options.
I am interested in learning if the release has any features that improves performance of BO against MSAS cubes.
Any feedback would be much appreciated.
Edited by: ramaks on Dec 11, 2009 11:02 PM

Hi,
Here is the list of feature we have added in SP2 for OLAP universes:
<li>Definition and Where editors enabled
<li>Prompt editor
<li>MDX dictionary
<li>New parameters and controls at universe generation time
<li>Refresh Structure (aka Universe Update or Universe Life Cycle Management)
<li>Universe SDK enhancements.
You will find in attachment a PDF that describes the enhancements.
Regards
Didier

After updating to firefox 17.0 when I do a scan with Norton 360 it does not pick up tracking cookies what has changed from 16.0.02

After updating to firefox 17.0 when I do a scan with Norton 360 it no longer picks up tracking cookies. These cookies that were picked up with firefox 16.0.02 what have you changed? Further I am getting sick of these updates - at least tell us users what has changed in new versions.

Did you update Norton to the latest version to get support for Firefox 17?
*http://community.norton.com/t5/Norton-Internet-Security-Norton/bd-p/nis_feedback
*http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-17-Support-for-Norton-Toolbar/td-p/853420
*http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-17-Support-for-Norton-Toolbar/td-p/853416

I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

I updated my computer to the new software and now the iPhoto has a circle with a line through it. When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1" When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application". I checked and there is nothing under the "purchases" in my App store. Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store. Please try again". Just want to know how do to fix.

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

Download helper add-on no longer works after update of firefox, what has changed?

After I updated Firefox to 18.0.02 the download helper stopped working on 98% of the websites I watch TV programs on. What has changed and will it be returned to its previous condition?
The website I go to is: http://www.free-tv-video-online.me/internet/

Are you using an add-on as a download helper?

I have recently changed my Apple ID password, but i now cant access my icloud with the new password, i thought the 2 were linked?

i have recently changed my Apple ID password, but i now cant access my icloud with the new password, i thought the 2 were linked?

Hi helenbeach,
If you've recently made changes to your Apple ID, you may need to update or log out/log back in to some of the related services for those changes to take effect. You may find the following article helpful:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Regards,
- Brenden

Dynamic Fonts loading in CS4 vs CS3. What has changed?!

Hi there,
I've had BIG troubles loading dynamic fonts in CS4. Well I had a whole library written in AS3 for CS3 which works just fine. But the whole thing doesn't work anymore in CS4. The textfields are empty although the fonts are loaded and registered via Font.registerFont. So the loading process actually worked. But the text just doesn't appear anymore.
In CS3 it works, in CS4 id doesn't work, with exactly the same FLA and AS files.
The Font files were exported with CS3. Maybe there's the problem? There is another font-file I had to export with flex (due to the character limitations in the flash IDE), that actually does work(!)
So what has changed between CS3 and CS4? There must be some reason why things don't work anymore like they did before.
If someone is interested in the source... it's quite a lot just to get a font loaded.

just out of curiosity -- did you update all of the applications?
elaine

What has changed in the new XFi drivers vs the be

Similar Messages

Maybe you are looking for