What if my computer won't allow me to sync my music and it's has been authorized? As well as it recognizes my IPod nano for a minute and then it disconnects itself how do I fix it?

Please help me and give me any tips.

Place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Similar Messages

When FF restarts my "browser.newtab.url" has been HIJACKED, it works fine if i reset it BUT on restart its back were it was ? HOW CAN I FIX THIS ?wstfbe

when FF restarts my "browser.newtab.url" has been HIJACKED, it works fine if i reset it BUT on restart its back were it was ? HOW CAN I FIX THIS ? have reset it 20 times works fine while program FIREFOX Runs if program or OS shuts down its HIJACKED AGAIN.
there must be a file or location that is ONLY USED ON LAUNCH, That has been modified or hacked.
small clinch that is driving me nuts.
Thanks RMY

What is "browser.newtab.url" changed to?
Knowing that may lead us to a solution as to what Malware your PC is infested with.

Ipod nano 6th generation is not recognized by iTunes. How do I fix this??

I bought an Ipod nano 6th Gen. yesterday and I am not able to connect to iTunes. It is not recognized.

What version of iTunes are you running?
Allan

My Ipod nano power button wont work while headset are in, how do i fix it?

Hello, I got myself a iPod nano 6th gen. and I'm already having problems with it. I got it from ebay and it was working all good, expect one day the power/sleep button just stop working when the headset are plugged in.
so this is how I can somewhat make it work on it but it still stinks to work with it like this. When I have no head set plug in, it works all fine. The power/sleep button is okay, the volume button is okay, and the touch screen is okay, but once I plug the headset set in, if shut off after 1 second, and cant turn it back on, then if i plug my power cable in then I can use the touch screes, but the power/sleep button doesn't work as well the volume buttons. Now if I do a soft reset with the power button and down volume and get the apple logo on, I can quickly get the headset plug in and play the music with out the power cable in, but still cant use the button at all. Also when I have it plug in to the power cable then plug in the headset, it shut off until I replug in the power cable or remove the headset to turn it back on.
How can I fix this? I tried the factory reset through iTunes, and it didn't help. I try the diagnostic and that didn't help. Should I just send it in and pay for the repair cost or what?

The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an Apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

I have had my ipod nano for 2 months, and the left earbud no longer works. Can I get a replacement, and how do I go about it?

I have had my ipod nano 7th gen. for 2 months, and the left earbud no longer works. Can I get a replacement, and how do I go about it?

Or make an appointment at the Genius Bar of an Apple store
Apple Retail Store - Genius Bar

HT1414 New iPhone iTunes won't allow me to sync all music

Music isn't downloading on my new iPhone

I have the same problem
it wont ene get past preparing to sync
then comes up with failed to sync as another cync client is running. i have no other applications syncing with the phone.
It has only happened since the 4.3 update and updating itunes.
Any suggestions

This user is allowed a maximum number of 5 concurrent shells, which has been exceeded.

I have a C# component which executes Powershell scripts in powershell environment. Suddenly it started to show some issues, Now, when I try to execute the following, it shows exception
Enter-PSSession -ComputerName 192.21.10.71 -Credential abc\admin
The exception is given below...
Enter-PSSession : Connecting to remote server failed with the following error message :
The WS-Management service cannot process the request. **This user is allowed a maximum
number of 5 concurrent shells, which has been exceeded.** Close existing shells or raise
the quota for this user. For more information, see the about_Remote_Troubleshooting
Help topic.
At line:1 char:16
+ Enter-PSSession <<<< -ComputerName 192.21.10.71 -Credential abc\admin
+ CategoryInfo : InvalidArgument: (192.21.10.71:String) [Enter-PSSession],
PSRemotingTransportException
+ FullyQualifiedErrorId : CreateRemoteRunspaceFailed
I fear, this is because I haven't properly closed / disposed the runspaces created in c# component.
Here is the code extracted from my component
Collection<PSObject> objPS = new Collection<PSObject>();
PowerShell powershell = PowerShell.Create();
PSCredential credential = new PSCredential(strUserName, password);
objRunspace = RunspaceFactory.CreateRunspace();
objRunspace.Open();
objPS = powershell.Invoke();
finally
objRunspace.Dispose();
I am beating the bush, instead of finding the root cause of this issue.
Thanks...

Hi,
Even I am facing the same issue while trying to open session in my C# code.
I have created and using one System.Management.Automation.Runspaces.Runspace object. Which is created by calling Open() method.
At the end while exiting the program I am calling Dispose() method.
Initially when I wrote this client, I was able to run powershell commands without any issue. After some days of use I got this below exception.
Result Message: Assembly Initialization method
InitializeLyncTestSuite threw exception. System.Management.Automation.Remoting.PSRemotingTransportException: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : The WS-Management
service cannot process the request. The maximum number of concurrent shells for this user has been exceeded. Close existing shells or raise the quota for this user. For more information, see the about_Remote_Troubleshooting Help topic.. Aborting test execution.
Result StackTrace:
at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal.Open()
at System.Management.Automation.Runspaces.RunspacePool.Open()
at System.Management.Automation.RemoteRunspace.Open()
After restarting all the Lync Server services I was able to avoid this exception. But after using this client couple of times now, I am facing the same issue again.
Does calling Dispose() method is not enough for closing a session from C# code? Or should I use something else to close session from C# client?

HT204053 I have had an iphone and itunes id for years. Now 2 of my kids got ipod touches and 2 got ipod nanos for christmas. How do I add them on to my account and download songs and apps I already purchased for myself? HELP!

I have had an itunes account for yearsfor my iphone. Now 2 of my kids got ipod touches and 2 got ipod nanos for Christmas. I can't figure out how to add them on to my itunes account so I can download games and apps that I have previously purchased. Please help!!

For Messages they will each need their own iCloud accounts. You should also enable Restrictions in Settings > General > Restrictions and disable auto-download on the other devices.

HT2729 My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

My 7th generation iPod nano won't allow me to sync videos from iTunes. How can I fix this?

What video content works with iTunes and mobile devices?
iTunes:
Video content purchased from the iTunes Store.
QuickTime and MPEG-4 movie files that end in ".mov", ".m4v", or ".mp4" and are playable in QuickTime Player.
Video podcasts.
iTunes Digital Copies.
iTunes Store Movie Rentals (Requires iTunes 9 or later).
Mobile Devices:
Video content purchased from the iTunes Store.
Videos that have been shared to iTunes using QuickTime Player (Mac OS X v10.6 Snow Leopard).
Videos that have been re-encoded for iPod with QuickTime 7 Pro.
Videos that have been re-encoded for iPod with iMovie, Final Cut Pro, and others. Refer to Exporting a movie from iMovie HD to iPod for an iMovie HD tutorial.
Video Podcasts that have been created for mobile devices.
Video files after using the iTunes File > Create New Version > Create iPod or iPhone version option.
Video files after using the iTunes File > Create New Version > Create iPad or AppleTV version option (iPad and AppleTV only).
See below for detailed movie specifications.
iTunes Store Movie Rentals (Requires iTunes 9 or later).
Does the video need to be encoded in a special way?
All mobile devices which iTunes can sync video to can play the following video formats:
H.264
File formats: .m4v, .mp4, and .mov
Video: Up to 768 kbits/sec, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3.
Audio: AAC-LC up to 160 kbits/sec, 48 Khz, and stereo audio.
MPEG-4
File formats: .m4v, .mp4, and .mov
Video: Up to 2.5 Mbits/sec, 480 x 480, 30 fps, Simple Profile.
Audio: AAC-LC up to 160 kbits/sec, 48 Khz, stereo audio.
Other formats may be supported by newer devices. The technical specifications can give additional details.

I recently updated my iPhone to IOS 8 and it said I need the latest version of iTunes to sync and back up however my computer won't allow it what do I do !?? Anything helps!!!

I recently updated my iPhone to IOS 8 and it said I need the latest version of iTunes to sync and back up however my computer won't allow it what do I do !?? Anything helps!!!

If it's in recovery mode, the data is already gone. Why did you never back up your important data?

My computer won't allow me to duplicate a CD! Error code -8058

I need to copy a CD and my lousy computer won't allow me. Is there some reason why it's not?

You didn't mention what CD you are trying to copy.
If it is just a regular CD, then it is possible that it is somehow copy-protected. This is a standard industry practice to prevent you from making copies of their programs. This is supposedly to crack-down on software piracy.
If it is a DVD, then the above suggestion is still possible. All DVD movies (well the commercial ones) are copy protected. And, duplicating them by any means is actually illegal in the United States (although there are programs that will do it - but those programs are also illegal here).
Copying program DVD's (such as the Mac OS) is legal if the license agreement permits it, and even then usually only for the purpose of having a backup in-case the original gets scratched or damaged somehow.
If it is not copy protected, and it is a DVD, then:
You should verify that your source DVD and destination DVD-R are the same type of disk, and that your drive can write that type of disk.
There are standard DVD disks and Dual-Layer disks. The Dual-Layer disks hold roughly double the capacity of a standard disk.
So, if you are trying to copy a Dual-Layer disk to a standard DVD disk, then it's not going to work.
Likewise, your drive also needs to be capable of writing to a dual-layer disk. Only the drives in the 17-inch MacBook Pro are able to do this. The 15-inch MacBook Pro is not able to write dual-layer disks.
Now, assuming that both the disk you are reading and the disk you are writing to are NOT Dual Layer DVD disks, then you may have a media problem.
In this case, it could be that the media is not a type that works well in your computer. Some drives are very particular about who's disks they'll work with. Others will burn anything.
So, I would check to see if the computer will burn files to that disk (or the same kind of disk) without trouble.
If it will write to that disk, but still will not copy the disk you are trying to duplicate, then you are probably dealing with copy protection or disks that are in a format that either you cannot write or are of different types.
If you are working with a DVD, you can usually tell if it is a dual-layer disk by seeing how large it's reported capacity is in the Finder.
Right-click on the disk on your desktop, and then click on "Get Info". If the reported capacity is beyond 4.7 GB, then you are most likely working with a dual-layer DVD.
And, of course, the obvious, don't try to copy a CD to a DVD or a DVD to a CD.
And, one more detail is that you need to have plenty of space available on your hard drive to burn a DVD or duplicate one. I tried with about 4 or 5 GB of space free, and was given an error. But, with more space available (around 20 GB) the computer was happy to burn a disk for me.
Again, without more information, it's hard to say for sure what your problem is. But, hopefully the ideas above will provide you with some help in making sure you are on the right track.

HT4623 My iPad keep opening numerous programs by itself, how do we fix that problem?

My iPad keep opening numerous programs by itself, how do I fix this problem?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.

When im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

when im accessing the internet using my iphone i cant use it because i am having a grey screen and the phone disables itself. how can i fix it. thanks.

You must have a valid form of payment for the app store in the country you are using. Most app stores are separate legal entities to comply with local laws. It is possible to have an account without a credit card, however; see: http://support.apple.com/kb/HT2534

HT204053 i restarted my apple id email because i deleted my old email.. but now my phone won't backup to icloud because it's asking for the password to the old email. How would i fix this?

i restarted my apple id email because i deleted my old email.. but now my phone won't backup to icloud because it's asking for the password to the old email. How would i fix this?

If your phone is signed into your old iCloud ID ("email"), you need to delete the existing account then sign back in with your new ID. To do this go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

What if my computer won't allow me to sync my music and it's has been authorized? As well as it recognizes my IPod nano for a minute and then it disconnects itself how do I fix it?

Similar Messages

Maybe you are looking for