What is a DEPENDENCY file?

I need to import a certain class in my program. Say I need one.two.Three
When I look in folder one, there is no class Three, only a one.two.DEPENDENCY file. What is a dependency file and where is the class?
Thanks,
cmp2

When I look in folder one, there is no class Three,
only a one.two.DEPENDENCY file. What is a dependency
file and where is the class?I would guess it's a file created by your IDE, not anything necessarily to do with Java per se. And how would I know where the class file is, when you have to compile it and put it in the appropriate place?

Similar Messages

What Are Dependent Files?

Whenever I am uploading my site I get a Do you wish to put dependent files thing on, can someone please explain to me what this is?:

For one thing, your page is too wide and offset 350px to the right. On my display, I have to horizontal scroll quite a bit to the see it. Not a good user experience.
Explicit height values on containers limit how much content your page can hold. This will create problems later when you need to add more text.
See this article for more on why APDivs are really bad for primary layouts.
http://www.apptools.com/examples/pagelayout101.php
For best results, use one of the pre-built CSS Layouts in DW. Go to File > New > Blank page > HTML. Select a layout from the 3rd panel and hit Create.
Nancy O.

Dependent Files for Crystal Report missing while making Setup

Hi Support Team
I am trying to make a MSI Setup of my windows application by using Install Shield 2010
Development Environment that is used to develop the application is
VS 2008 having .Net Framework 3.5 SP1
Crystal Reports 2008 with Service pack 2
When I am trying to build the setup for my application using Install Shield 2010 I am getting errors related to crystal reports.
I am using CrystalDecisions.Windows.Forms.CrystalReportViewer control to display the reports at runtime.
Dlls that I included with the setup related to this viewer are
CrystalDecision.CrystalReports.Engine
CrystalDecision.CrystalReports.Framework
CrystalDecision.CrystalReports.InfoStore
CrystalDecision.CrystalReports.ReportSource
CrystalDecision.CrystalReports.Shared
CrystalDecision.Windows.Forms
The Errors that I am getting upon building the setup are listed below
Could not find dependent file BussinessObjects.Enterprise.Sdk, or One of its dependencies of component CrystalDecisions.CrystalReports.Engine.dll                   Error Code 6248
Could not find dependent file crpe32.dll, or one of its dependencies of component CrystalDecisions.CrystalReports.Engine.dll
u2dmapi.dll-------
u2dpost.dll----
And the same errors for
CrystalDecision.Enterprise.Framework.dll
CrystalDecision.Enterprise.InfoStore.dll
CrystalDecision.windows.forms.dll
And File not found. An error occurred merging module DMO.9b0u2026u2026u2026          Error Code 4075
And File not found. An error occurred merging module DMO1033.6496u2026u2026u2026     Error Code 4075
I tried your several suggestions from your forums like
I installed
Crystal Reports 2008 Runtime
Crystal Reports Basic Runtime for Visual Studio 2008
Crystal Reports Basic for Visual Studio 2008 Service pack1
And
CRBasicVS2008_redistu2026.
CRRedist2008_x86.msi
And by putting the files like Product.xml in the C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages
And I installed vcredist_x86.exe to install Microsoft Visual C++ 2005 Redistributable on my machine
But no luck still I am getting the same errors.
Please let me know which files I need to install on my development machine to get my setup working.
Waiting eagerly for the response
With Regards
Arshad
u2003

Looks to me like you're adding just about any runtime to the project to make it work. Look at [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki and find out what runtime you actually need. Also, look at the CR assemblies referenced in your project. Then make sure that the you are using the correct msm file(s) for the correct version of the assemblies referenced. Do not add any other versions of CR msm files.
I would also recommend having a look at the developer help file here;
http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm
(search for runtime).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Dependent files / ftp / checking if file is referenced anywhere

I have a web page I've taken over the administration of. The
site is a number of years old, and there are numerous files that
are still on the site, but aren't used anymore.
I am wondering if there is a way to check if a certain file
[such as xyzfoo.jpg, or xyzfoo.mp3] is referenced in any of the
current pages. Bottom line, is there would be anything lost by
deleting it.
Whether that's possible or not, the other direction I'm
wondering if is possible, is whether I can select a specific page
(not necessarily the homepage), and Get (via the ftp connection on
Dreamweaver) that page and everything it needs/references.
I am aware of the checkbox for "Display Dependent Files" on
the Site Map Layout, as well as saying "Yes" to "Get Dependent
Files" when FTPing the files from Remote to Local, but even when I
did this on one test page it did not bring in the .mp3 files that
the page links to.
Whether there is a conventional or unconventional way to do
this, I would be eager to hear any thoughts on this; I am normally
a programmer but relatively new to doing much with web pages and
would welcome any assistance.
Thank you.

You would need to understand what a dependent file is to know
how that
option works. A 'dependent' file is any file that is required
for the file
you are getting/putting to properly display. A file that is
merely linked
to from a page is not a dependent file.
That said, you can check for linkages in two ways -
1. Do a sitewide FIND for the filename, or
2. Select the file, and rename it. If that file is referenced
on other
pages, DW will tell you, and ask you if you want to proceed.
By saying NO
to this, then you will exit the rename.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"matthewtech" <[email protected]> wrote in
message
news:[email protected]...
>I have a web page I've taken over the administration of.
The site is a
>number
> of years old, and there are numerous files that are
still on the site, but
> aren't used anymore.
>
> I am wondering if there is a way to check if a certain
file [such as
> xyzfoo.jpg, or xyzfoo.mp3] is referenced in any of the
current pages.
> Bottom
> line, is there would be anything lost by deleting it.
>
> Whether that's possible or not, the other direction I'm
wondering if is
> possible, is whether I can select a specific page (not
necessarily the
> homepage), and Get (via the ftp connection on
Dreamweaver) that page and
> everything it needs/references.
> I am aware of the checkbox for "Display Dependent Files"
on the Site Map
> Layout, as well as saying "Yes" to "Get Dependent Files"
when FTPing the
> files
> from Remote to Local, but even when I did this on one
test page it did not
> bring in the .mp3 files that the page links to.
>
> Whether there is a conventional or unconventional way to
do this, I would
> be
> eager to hear any thoughts on this; I am normally a
programmer but
> relatively
> new to doing much with web pages and would welcome any
assistance.
>
> Thank you.
>

Dreamweaver Dependent Files

Hi,
i have a question about dependent files in Dreamweaver. Let's say I'm working directly on the FTP server (yes I know it's bad practice). When I open a file from this FTP the dialog appears asking me if I want to download depended files. I click no. After I edit the file I save it. It all works great. The problem starts when I try to edit this file on second computer where I already edited it before.
Dreamweaver creates local file when you open file on FTP server. When I open online file on FTP again on this second computer and click NO for downloading dependent files, sometimes the file still gets overwritten with older version of this file that Dreamweaver has stored locally. That's how I loose all changes I've done on first computer. This happens mostly to the files that are added to .html files like .css, .js and so on.
Can somebody explain to me what's the right way to use this dependent files or how to disable this function. I can't remember but I think you can't disable this function in CS4. Can you do it in CS5?
Thank you

If you are working on a site that exists in full (all associated files) only on the server, how do you keep straight your current files, unless you specifically delete your local files after each "on the FTP server" editing session? Sounds like a real pain in the neck.
And it seems kind of risky to me.
Here's how I would handle working on one uploaded site and two computers. This would also hold when two persons in different places (on different computers) work on the same site.
Keep the server version always totally up to date.
Turn on the "check in/check out" system, so a file cannot be opened without opening the server version.
If you don't want to use "check in/check out", always download the up to date version of a page whenever you edit it. Also download the dependent files. In truth, files will not download again if your local version is already identical to the file on the server.
If there really are two people working from two different computers, you need to work out a system of communication...you don't want to overwrite someone else's changes, or have them overwrite yours. That is what "check in/check out" is perfect for.
Always work locally and upload your changed pages (and auxiliary/dependent files) to the server
Periodically do a "synchronize" to make sure your local site and your server site are identical. Do this from both computers.
Remember that by working locally and keeping a copy of your site locally in one or two places is insurance. If you do not do that, and your server goes down or corrupts your site, how will you retrieve your files? Make them all over again? If you have them on your local computer, you need only upload a copy of your site and you're back in business.
You do not want to disable "dependent files", because they are the files that make your page work. When you allow Dreamweaver to keep track of your files for you via synchronize and downloading the dependent files, it will do a good job. When you try to take more of that function on yourself manually, you effectively 'break' the system by subverting the program from its innate tasks.
Beth

Dreamweaver CS5, cant edit dependent files

Its been a couple of months since I made any changes to my site in Dreamweaver. I use a template for my web pages. I made some changes to my template file, I made some changes to my home page, which neccessitated changes to a couple of style rules in myh main *.css file. When I click on a rule, i get a message stating, "Unable to open example.com/style.css because it could not be found on your hard disk. Download the file..." However, all of my dependent files, *.css etc, are in fact on my hard drive, and in fact there is no difference when compared to the corresponding remote files. Im sure I just have solme setting wrong. But I havent a clue what I need to do to be able to start editing my site .css file again. I have gone back and forth between showing myh local files and the remote files in the files panel, and there is no change.
Please someone help.

@MurraySummers, yes the dependent files are located in the root directory of my site on my hard drive, right along with all the .html pages I have created and am able to update btw. I can add content to the individual .html pages, but all of my dependent files, not just the .css files, but the java script files too, I would be unable to make changes to those, if I had actually wanted to which i dont.
Another piece of information if it helps, if i click on any of the dependent file buttons which are located on the bar next to the source code button to show the individual file content, a yellow bar beneath the address bar appears with the following: sample.css is a remote file and cannot be edited.
I only have the one site. Interestingly, I tried something that may or may not give someone an idea of my problem. I have a couple of copies of this site for back up in my dreamweaver folder. I opened up an older copy of the index file from one of those, and i do NOT have the same problems. I CAN open up an individual rule, and of course save a change to it if I wanted. Now I couild use one of those older copies, but I wouldnt know where to begin to make all the changes to all the pages to get me back up to current content.

"put dependent files" file name in dialog

<good> When I'm doing a Save All, and I get the dialog asking to put dependent files... this dialog pops up for each of the files to be saved. </good>
But, I don't see anywhere on it the name of which file I'm trying to put in this instance. (It did show up in a dialog just prior to the "put dependent files" dialog, but now is obscure.)
Is this configurable, or should I raise an enhancement request....?

Are you downloading the file (right-click, save link as), or just opening it by clicking it?
If the latter, then what happens is the file is loaded to the temporary internet files folder by IE and assigned a temporary name, which is then used when you're trying to save it.
You can test this out by going to File - Document Properties before trying to save and looking at the file's location.

What is the .aplibrary file?

Many thanks in advance for your attention.
i have backed up my Aperture Library mostly every time I add new photos - sometimes every few dayas - but every once in awhile - while this backup file is being created, another file is spontaneously created, named for example, "Aperture Library 11-2-2011.aplibrary."
It does not happen with each backup I do, but has happened a few times now, maybe every 3-4 backups?
What is this additional file - .aplibrary? Do I need it and do I need to back them up as well for Aperture to work smoothly?

Hi moonlightcaravoan,
to my knowledge *.aplibrary stands for Aperture pictures library database file. As this suggests it is used to store images in single database. It is actually not just a simple file but a package containing several subfolders. You should be able to verify that by just right-klicking on the aplibrary element in the Finder and select "show package contents". This should however just serve for your information. The contents of the subfolders should not be changed and it is not supposed to access single image files within these folders.
To my understanding the *.aplibrary file(s) - there may be several, depending on how any you create within Aperture - are essential for your backups.
I hope my answer is helpful.

What is a binary file????

when i download sum thing it comes up as a binary file???? What is a binary file and is it safe to download???

Click here for information on the format; whether the file is safe or not to open and use depends on its contents. StuffIt Expander will open them.
(41695)

Photoshop complete list of dependant file extension

Is there a Photo directory for all the dependant file extensions assoicated with preset, curves, actions, save for the web, work spaces, type and paragraph styles etc, etc.

Hi Kirby,
It would be very useful, yes, but I do not know of any official document.
But from experimenting I found, that the preferences file contains
all settings you set from the Preferences panel (surprise, surprise)
the "recent directory" lists
the path to your Aperture library
the layout of the GUI
I always keep the original preferences file for reference, when I need to delete it. You can read the preferences file with Xcode, a free download from the AppStore and check the older settings.
Regards
Léonie
P.S. It is far easier to say what is not in the "Preferences" file: All settings that you find in "Your User Library > Application Support > Aperture", but you probably know all that

Dependant files not Uploading to Server CS5

When I click "Yes" to upload dependant files to the server, DW doesn't upload them. For example, I added a downloadable PDF file to a page, saved it, clicked PUT to upload it to the server, and then when I went to the web and clicked on the link, I got the White Page File Not Found.
I have checked in my Site preferences, and my Site Manager and everything looks right, I'm not sure what I'm missing?
Thank you!

Sure, here is the page I worked on today. I added the very first link you see on the page, "Event Flyer"
http://www.slaalosangeles.org/events
Then I saved the page, and PUT the events.html, and the page uploaded correctly but is missing the PDF for the flyer. I intentionally didn't select it and upload it on its own because I wanted to test the dependent files feature.
Thanks for the help.

Template changes won't update the dependent files

I am checking out a template file with its dependent files from my FTP server using Dreamweaver. I am making some changes, and saving it. It is supposed to prompt me to update the dependent files. But it doesn't. So none of the changes are applied to any of the files using the template. I also tried to update the pages manually by going to Modify>Templates>Update Pages.. But DW is looking into a different path to find the templates, rather than looking into the folder where the server is set-up. What is the best way to make this work?

Is your site properly defined in Site > Manage Sites?
Do you have the Template.dwt file in a Templates folder in your local site?
Are you sure this is the right template for this project?
Do you have all the child pages in your local site folder?
It's important to understand that Templates do nothing on the web server. They are proprietary to DW and only work on your local site files.
Nancy O.

Not able to download stack using MOPZ (There is no OS/DB dependent file)

Hi,
I want to download ERP 6.0 EHP4 Stack 8. I am having solution manager 7 with EHP1, so once I select the Target enhancement package product version & Target enhancement package stack. I get option of selecting the Technical Usage, In that I select Central Application & HCM, but when I continue to next step 2.3 Select OS/DB-Dependent files, I get message "There is no OS/DB dependent file" along with below mentioned messaged
EA-IPPE 400 SAPKGPID19 is not available for user S0003575872
SAP_APPL 604 SAPKH60409 is not available for user S0003575872
Please suggest, as I am stuck and not able to download the stack.
Regads,
Manish Sharma

Hi
ERP 6.0 EHP4 SPS09 not yet released, see the sap note Note 1064635 - SAP ERP Enhancement Packages: SP Stacks Release Info Note
please again check what you done on step 2.1 in MOPZ, have you selected proper target stack version?
if you not sure on the steps info pls read the help link here
[http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/30/1fea80d9b44f5a88fc0038d3dabb76/content.htm]
Jansi

Got dependent files?

I am newbie to Dreamweaver CS5. What does it mean by "Got dependent files?"

Originally posted by: vijai.hotmail.co.uk
Hi Stefan,
The jars required for the plugin(plugin A) are included in another
plugin(plugin B) and I have added plugin B in plugin A's Required Bundle
of the MANIFEST.MF.
vijai
Stefan Langer wrote:
> Do you have jars included in your Plugin?
> Vijai wrote:
>> hi douglas,
>>
>> There was nothing i the error log...the plugin got created clean...no
>> errors of any sort...but when i copied it to the plugin directory it
>> just wouldnt load.But when i tried creating it again, this time in the
>> export as plugin dialog, i unchecked the "Package plugin as individual
>> JAR archives" check box, and this time the plugin got created as folders
>> on the filesystem, this when i copied it to the plugin directory, it
>> worked fine... I still dont know why it did not work as a jar archive.
>> Vijai
>>
>> Douglas Pollock wrote:
>>
>>> Vijai wrote:
>>>
>>>> I have created a plugin using the PDE which was dependent on other
>>>> 3rd
>>>> party JAR files. Initially i got errors that a few classes that were
>>>> from
>>>> those jar files, could not be resolved.But after following procedures
>>>> described on this newsgroup, I managed to resolve that. When i exported
>>>> the PDE project to a plugin it ran fine not generating any errors or an
>>>> error log but when I copy the packaged plugin to the plugins
>>>> directory of
>>>> eclipse and restart the workbench, none of the plugin's implementations
>>>> like its views are visible...I dont know what must have gone wrong.
>>>> any help is appreciated..
>>
>>
>>> Is there anything in the .log file (or in the Error Log view)?
>>
>>
>>
>>
>>> cheers,
>>> d.
>>
>>
>>

Dependent Files Dialog Default Button

Sometimes I think I've been halucinating, but ...
I could have sworn that when I first installed Dreamweaver CS6 that the default button on the put Dependent Files dialog was "No". And then one day the default became "Yes". I almost feel like I hit some mystical key-combo that changed it's behaviour & mine. Hmmm.
So is there a way to change the default button to "No"? It would be my preference.
Thanks in advance!
OS X 10.8.1
Dreamweaver CS6 v12.0 Build 5842

butisitart wrote:
Am I going crazy? Was I halucinating? Did I dream the whole thing?
I couldn't possibly comment.
I remember writing something about the way dependent files work many moons ago, so I checked my "Essential Guide to DW CS4" and found a little gem of information that I had completely forgotten about.
The default for Put Dependent Files is No. However...
If you deselect the check box labelled "FTP transfer options: Select default action in dialogs after [30] seconds", guess what happens?
You've got it... The default changes to Yes.
Heaven only knows why this happens, but select that check box again, and your sanity should be preserved for a little while longer.

What is a DEPENDENCY file?

Similar Messages

Maybe you are looking for