What is  data element name of  Planning Version ?

Hi All,
In SAP 4.C Version they maintainted Planning Version  data element name is
/SAPAPO/CRES_VRSIOEX.
Could you any one help me out what is the  data element mane of <b>Planning Version</b>  in ECC 6.0 Version?
will give you points.
waiting for reply.
Thanks

/SAPAPO/SCMB_VRSIOID           Name of Planning Version
/SAPAPO/VRSIA                          Planning Version Number

Similar Messages

  • Planning Version Table

    Hi SAP Gurus,
    I would like to inquire what particular table in SAP R/3 that can display list of planning version created for a specific material and plant using data element VRSIO. Planning version is created in tcode MC93
    Thanks,
    Patrick

    Hi,
    The following table will not list the planning version for a specific material since there's no field for material and plant on table provided.
    Thanks,
    Patrick

  • What is domain and dataelement.....diff b/w domain and data element

    dear all
    what is domain?
    what is data element?
    In one domain how many data elements are possible to used?
    with out data element how can u create a table? explain briefly.

    To clarify it little further the Data element and Domains are used in combination where similiar type of data fields are to be used with some more additional characteristics to each Data element.
    For example consider creating a table which contains Employee details. The Columns Name1 and Name2 are to be of type char and length 40. There are 2 ways to do this,
    1. You can assign the fields Name1 and Name2 directly to CHAR40(as the data element) in SE11. But this will make both the fields to have same characteristics with no difference among them.
    2. The other way is to assign the columns Name1 and Name2 to seperate Data elements say DE_NAME1 and DE_NAME2. This method has tha advantage of adding further charectristics and labels to the data element. Hence in this case you can add a label "Name1" for the data element DE_NAME1 and "Name2" for data element DE_NAME2. And both these data element will point to the same domain CHAR40, hence length and type is same.
    Hope this helps.
    Thanks,
    Prasath N

  • Add Planning Version in SDP94 header

    Hi SCM Gurus,
    Is there any possibility to add the planning version information in to the planning book "header", I quote this is because I want the planning version to be shown as the place in attachment. ( through menu I can go to Setting-> Header Information to add version somewhere near the view, but that's not what I want)
    Please kindly advise, if I have to make this by user-exit, please indicate the name for me.
    Thank you very much!
    Br,
    Lawrence

    Hi Lawrence
    Might be completely out of box idea.
    If I understood correctly, you want to have this visibility mainly for planner to aware them which version data they are accessing. You could create separate data views for each version and also restrict by authorization.
    Once you different versions, you can rename them with versions for example data view name could include version like SNP 104 Weeks (000) and SNP 104 weeks (simulation).
    Hope this could help the purpose.
    Thanks
    Amol

  • Planning version in Characteristic Based Planning?

    What is the use of planning version in Characteristic Based Planning?

    Hi Lawrence
    Might be completely out of box idea.
    If I understood correctly, you want to have this visibility mainly for planner to aware them which version data they are accessing. You could create separate data views for each version and also restrict by authorization.
    Once you different versions, you can rename them with versions for example data view name could include version like SNP 104 Weeks (000) and SNP 104 weeks (simulation).
    Hope this could help the purpose.
    Thanks
    Amol

  • Finding Short Text for selected Data Element

    Hi all,
    I need to find the short description using a data element (technical name) as a search criteria, where you can use trxn SE12 to search for its short description.
    e.g. KEY = 'Synchronization key'
           SPRAS = 'Language Key'
           VBELN = 'Sales and Distribution Document Number'
    In my ABAP program, I have a list of data elements (technical name) but I want its short description to be displayed.
    Can someone shed of light of how to achieve the above?
    Thanks and regards,
    Patrick

    Field DDTEXT Table DD04T will return the short description of the data element. Also pass language 'E' in DDLANGUAGE field and data element name in ROLLNAME.
    For short description use field: DDTEXT
    For Short Field Label use field : SCRTEXT_S
    For medium Field Label use field : SCRTEXT_M
    For medium Field Label use field: SCRTEXT_L
    For heading Use Filed: REPTEXT

  • SAP HR _ OM -Plan versions

    Hi Gurus,
       I have created multiple Plan versions where one of the plan version is the current and the integration plan version. The company decides to re-org and use the Other plan version.
    What are the configurations that have to be done? What changes will take place?
    Can a customer just change the current plan version and use the Alternative ones? Is there any particular procedure to change the plan version from Current plan version?
    Please help in understanding this concept.

    Could you please explain to me what happens when you run this report. The report talks about the transport. I want to know what exactly changes and what all should be changed when Plan version is changed?

  • How to control required and optional data elements

    I am developing a web service using a stateless EJB. By default, when I use servicegen, the WSDL contains nillable="true" for all elements. How can I modify my EJB code so I can specify which elements are required vs optional?
    Thanks.

    Hi,
    Use Function Module READ_TEXT to retrive the long text.
    Pass below values for parameters
    text name - <data element name>
    text id - 'TX'.
    text object - 'DOKU'.
    <b>Reward points for helpful answers</b>
    Satish
    Message was edited by:
            Satish Panakala

  • Actuals in Plan Version 0

    Can someone explain to me what SAP means by 'actuals' in plan version 0?  Is this supposed to mean that the actual postings to a cost center (for example) are copied into this version?  This would mean that after a month is closed, the actuals would equal plan?
    Thanks in advance

    Plan and actual transactions are stored in a single table. For planning, version is one of the essential characteristics, against which the plan values are stored. Though this version does not mean much to actuals, SAP has made it to default to version '0', you can choose any other version also to record actuals against that version. But only one version can be chosen to record the actuals.
    Once you have set in the customizing which version shall be activated for the actuals, you never visit that again. It matters only when a report is being developed where you have to call the plan version and enter 0 against that for pulling actuals.
    Actual do not become plan because a version is being asked by the system.

  • Change VTTK-TEXT1 Data Element Display text

    Hi All,
    Can any one please tell me is there any way that i can change the Display Text of the Data Element VTTK_TEXT1 without getting an access Key from SAP .
    Thanks ,
    Dilum

    Hi Dilum,
    You can do this using TEXT-EXITS
    TOCDE: CMOD
    GOTO---> TEXT ENHANCEMENT--->KEYWORD----> CHANGE( Give Data Element name )    SAVE
    Best Regards,
    Pravin

  • Load Documentation to Data elements

    Hi,
    I'm looking for a smart standard solution (BAPI?)  to load documentation in DDIC to data elements.
    The data which should be loaded is provided by an excel-file .
    How knows a standard report or a BAPI/function module ?
    Thx in advance
    Peter

    I think a BDC can be done on transaction SE61 with appropriate input......Unfortunately, I can't check the feasibility as I don't have authorization for the transaction as of now........
    Got a FM for this.......Chcek the code below...
    DATA: i_lines  TYPE TABLE OF tline,
          wa_lines TYPE tline.
    * Create Documentation
    wa_lines-tdformat = '*'.
    wa_lines-tdline   = 'TEST'.
    DO 50 TIMES.
      APPEND wa_lines TO i_lines.
    ENDDO.
    * Create Document
    CALL FUNCTION 'DOCU_UPD'
      EXPORTING
        id       = 'DE'            "For Data Element
        langu    = sy-langu
        object   = 'YA038539TEST5' "Data Element Name
      TABLES
        line     = i_lines
      EXCEPTIONS
        ret_code = 1
        OTHERS   = 2.
    IF sy-subrc EQ 0.
      WRITE 'Documentation Update Successful'.
    ENDIF.
    Edited by: Satyajit on Dec 21, 2010 5:07 PM

  • I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

    I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

    EdWeidman by default the download will be saved to your Download folder.  I do not know the exact name of the file which was provided to you.

  • Field names for data element are not displayed in selection box

    Hallo zusammen,
    ich habe ein Selektionsfeld definiert und einen Parameter erzeugt, der auf ein Tabellenfeld verweist. Der Feldbezeichner für das Datenelement aus der Tabelle wird nun aber nicht angezeigt, sondern ausschließlich der Variablenname.
    Woran kanndas liegen?
    Danke!
    Edited by: Matt on Feb 9, 2010 1:41 PM - translated subject

    I created data elements and use them in a db table. I've added this data elements as parameters of a selection screen in a function group top include but when I test my function module with this selection screen I see only the field names and not my field captions of my data elements.
    While editing report choose Goto->Text elements->Selection Texts-> select Dictionary checkebox next to your parameters ->activate. The caption will be used then.
    And another question: I have defined and activated a search helper which I can call in my selection screen with F4 but I don't see the symbol behind the text-field. What is the reason?
    Refer standard program DEMO_DYNPRO_F4_HELP_DICTIONARY to see various techniques of attaching input help to screen field, together with search help
    Regards
    Marcin

  • Table name for plan data

    Hi All,
    could you please give me table name for plan data. this is tcode where we can see for range of cost centers S_ALR_87013612 (range of cost centres) and cost elements as well. but our client wants to extract from the table which has the same values in the report S_ALR_87013612.
    from which table they need to extract.
    your early response will be highly appreciated.
    Regards,

    Dear,
    Try following tables..
    1. COKP - Primary planning
    2. COKS - Secondary planning.
    Regards,
    Chintan Joshi

  • Table & Field Name for Plan Data in CO

    Hi All,
    Can anyone tell me the table & field name where we can get the planned data in Cost Center Accounting and Profit Center Accounting.
    I checked out the COSP(which is Totals) and COEP tables for CCA but i could find the fields only for actual data and not planned data.
    Same for PCA...i checked out the GLPCT & GLPCA tables but in vain.
    Regards & Thanks
    Piyush Kothari.

    Hi,
    Thanks for the reply but COKL is only for Activity Type which contains Allocation Cost Elements.
    I would like to have the Table & Field name for Plan data of Primary Cost Element.
    Piyush

Maybe you are looking for

  • Is there another provider with good Customer Service and good Coverage over Oxford, Main?

    Hi, Reason I am from UK and am trying to find out how best to sign on to a US mobile network and one with the appropriate coverage, as I will be in New England for 3 months, 2 of that around Oxford, Maine. I have joined this forum just hoping for mor

  • Set body background image in reflow

    Hi, I've been lookoing up and down to find where I can set a background image for a page in reflow. Cant find it anywhere. If I manually edit the html or css in the files edge generates to add a background image, of course it works, but next time I r

  • Opening Image Window defaults

    When I open images in photoshop(windows, not tabs), why do the image windows open far left? Each time I edit I have to drag to center and enlarge. Is there any way to change defaults to have images open centered and full screen?

  • Why won't my iPad update to 7.1 after I paid for more storage as prompted

    I have an iPhone 5 and an iPad. I just paid $20 TWICE to gain more icloud storage to allow the 7.1 update on my iPad. Neither purchase worked and I'm out $40!?

  • Multiple Cheque Printing

    Hi I want to print multiple cheques on a single click. i am done with Printing setting like New output type, New page format but when i am printing multiple cheque it is overwriting. its not taking the page break. all the cheques are printing on a si