What is process type like delete overlap request

Hi experts,
what is process type like DELETE OVERLAP REQUEST. how to use it i mean after load data into target or before loading data.
for good answer points will assign.

Hi,
Whenever you load a data(eg full load). you can delete the previous request and you can load the new data. That's a called deleting overlapping request.
folllow these links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/e5603801be792de10000009b38f842/frameset.htm
process chain - delete request
deleting overlapping requests via a process chain
Delete overlapping requests from ODS
Delete Overlapping Requests from InfoCube: Before or After the Generate Ind
Delete overlapping request
Proc chain auto delete of overlapping requests not working.
if it is useful assign points
Regards,
Senthil Kumar.P

Similar Messages

Process Chain Help - Delete Overlapping requests

Dear Experts,
I have a requitement where I want to delete the ' previous days' request from the cube. This has to be from the data coming from only one DSO.
I can use the Delete overlapping request process type but I want to know how.
And again, this has to be only for the current month.I want to delete the overlapping requests of current month i.e now since I am in April I want to delete only the April requests. When I am in month May I dont want to delete april request anymore.
In other words I want to delete the april request until April 30th. On May 1st I dont want to delete the april 30th request. On may 1st it shouldn't delete anything. On May 2nd it should delete the May 1st request.
Can anyone help me with this.
Thanks,
KK

Hi KK,
If I have understood you correctly, you mean to say your cube is getting loaded from various Datasources and you want to delete the requests only for a particular Datasource and not for others.
Please correct me if i am wrong.
If I am right ! Then on the window "Delete Request from Infocube after update" you can "Delete Existing Requests - > Is current month" and on the bottom of that screen you can see a checkbox for Request Selection Through Routine. Check this and you can simply write a routine to do the deletion for only requests loaded from a particular datasource.
Hope it helps.
Regards
Hemant Khemani

Reasons for "Delete Overlapping Request"

Hi everyone,
A simple question for you gurus out there. What is the reason for having a process in the process chains to "Delete Overlapping Requests". I am not sure what it really does. Can someone please explain in simple terms the functionality of Delete Overlapping Requests and it's need. Please use an example if possible.
<Remoed_By_Moderator>
Offering or asking for points is against the forum rules
Edited by: Pravender on Aug 6, 2010 10:54 AM

Generally we do this Delete Overlapping Requests for cubes because you have a requirement to do daily full loads(assume incremental data) to Cube from the same DS if you don't delete the previous load .. In cube values gets double which is wrong data.. to avoid duplicates we use this Delete Overlapping Requests in PC .. if you don''t use this process in PC .. everyday manual action will be required to delete previous (yesterdays)request in cube.
Ex.
Req1 15000 records to cube -day1
Req2 15600 records to cube -day2
Req3 15600 records to cube -day3
in cube you will have 46000 records and keyfigures values gets tripple
if you use "Delete Overlapping Request" in PC
always deletes the previous request from the same DS

Process Type - Delete overlapping requests from an Info Cube

I have read many threads on this topic, still have some questions. To give you background, I will be doing delta load (delta process chain). But before delta, I want to do setup initialization (init process chain). I want to use this process type in my init process chain to delete all data in my cube loaded from a specific ods. I cannot use delete all contents process type because many odss feed the same cube.
1.     Do you put this process type after Load Data or before Load Data. I have seen both cases in SDN forums.
2.     Variant of this process type is an info package. Does this info package have to be same as in load data step or it can be different.
3.     I want to delete all data in cube which was loaded from my ods. Term overlapping is confusing to me. Will this process type delete all data or not.
Tanks in advance.

Yes, you can do that. Goto RSPC - under process types Load Process and Post Processing, you will see DELETE OVERLAP REQUESTS FROM INFOCUBE option is there.
Select the proper check boxes like same sourcesystem, same datasource etc...
If it is one time deletion, why not do that manually?
Also check: How to delete most recent request in a Cube by using process chain
Hope it helps..

Process type "Delete overlapping request in cube " in process chain

Hi
can somebody suggest me where i need to place the process type "Delete overlapping request" for an infocube.
Regards,

Hi,
When you use the corresponding process in the process
chain maintenance screens to specify the conditions for
automatic deletion, these conditions are applied to all
the InfoCubes for the selected InfoPackages
Overlapping: If you set this indicator, existing requests are also
delete from the InfoCube if the selection criteria of the new request partially or wholly overlap the selection criteria of the request to be deleted
Same or Comprehensive: If you set this indicator,
requests are only deleted from the InfoCube if
the selection conditions of the new request are
the same as or more comprehensive than the selection
conditions of the request to be deleted.
Thanks
Bhagesh

Process Maintenance: Delete Overlapping Requests from InfoCube

Hi Experts,
How can I open Process Maintenance: Delete Overlapping Requests from InfoCube Screen? What's T-code? Is that in Process Chain? Please tell me that....
Thanks in advance,

Hi
'Delete overlapping request' is an option(its a process type) in the process chains..
RSPC>Process types>Load Process and post process folder--->Delete overlapping request from the infocube..
here you can have more options like 'source systems are same',and infosources are same etc...
How to delete most recent request in a Cube by using process chain
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 28, 2008 11:35 AM

Process Chain - Unable to delete overlapping request

Hi Gurus
I'm in the mid of creating process chain to load transaction data in which I need to delete the previous load that loaded in using the same DTP previously
In the process chain , i have included a process "Delete Overlapping Request from Infocube" . Once i'm in the screen of maintain variant for this process, i selected DTP as the object type but unable to find the DTP that i have created under the object name.
Can someone point out what is missing
Thank you

Hi,
Looks like you need to give the the techincal name of the DTP. if you are un able to find the technical name of the DTP you can find that in the transport organizer.
just drag and drop the infoprovider ( with dataflow before) you will ge the DTP as required.
note the technical name of the DTP .
include the technical name in the process and activate the process.
Santosh

"Delete Overlapping Requests from InfoCube" in a Process Chain

Dear all,
I encountered a problem when I building the process chain in BW 3.0.
In a process chain, I schedule daily an InfoPackage to load data to an InfoCube and then delete the previously loaded data by the same InfoPacckage from the InfoCube.
For example, I have 2 InfoPacakge, A and B, and schedule to load data to InfoCube C. In the process chain, I scheduled daily the following tasks in sequence:
- Delete index in InfoCube C
- Load data through InfoPackage A to InfoCube C
- Delete duplicated request previously loaded through InfoPackage A in InfoCube C
- Load data through InfoPackage B to InfoCube C
- Delete duplicated request previously loaded through InfoPackage B in InfoCube C
- Create index in InfoCube C
However, when I activate the process chain, a warning message is prompted: No type "Delete Overlapping Requests from InfoCube" process allowed infront of process "Execute InfoPackage" variable ZPAK_4GMFI
Would anyone tell me why such warning message is prompted?
Many thanks!
Best regards,
Marcus

Hi all,
Re Ranjan:
I previously config the process chain like that:
(1)   Delete index in InfoCube C
(2)   Load data through InfoPackage A to InfoCube C
(3a) Delete duplicated request previously loaded through InfoPackage A in InfoCube C
(3b) Load data through InfoPackage B to InfoCube C
(4)   Delete duplicated request previously loaded through InfoPackage B in InfoCube C
(5)   Create index in InfoCube C
where (3a) and (3b) is executed simultaneously.
However, (3b) often reports error. I guess it may be due to the parallel run of (3a) and (3b). So that's why I set the process chain to be executed in serial.
Re Jacob:
I found that the process chain can be run even a warning message is prompted when activating the process chain!.
Thanks you all for your kind support!!
Best regards,
Marcus

Duplicate records: Process : Delete Overlapping Requests from InfoCube

Hi Experts,
We are loading data in standard costing cube with standard available option Full upload. In our process chain we have included process type "Delete Overlapping Requests from InfoCube". In our scenario we always load yesterday and today's data. In this case after loading yesterday's data, we need to check and delete the overlapping requests and then upload todays data.
Many a times this deletion process is failing due to message "Couldn't lock cube" because it is already locked by user "ALEREMOTE". This cause system to duplicate the records in cube.
How we can avoid this?
Alok

I tried running again and it again failed. Checked in SM12 and found this entry
800 ALEREMOTE 08/14/2007 E RSENQ_PROT_ENQ CREA_INDX ZCCA_C11 DATATARGET CREA_INDX ###################################### 0 1
This locked is not released since 14th. Is there way to remove the lock using some process.

Does Delete Overlapping Requests drop the BIA index like Selective deletion

Hi,
Does Delete Overlapping Requests process in a chain drop the Accelerator index like Selective Deletion does?

Hi,
No is does not.
-Vikram

Data Transfer Process and Delete Overlapping Requests

Hi All,
We are on BW 7.0 (Netweaver 2004s). We are using the new data transfer processing and transformation. We want to use the ability to delete overlapping requests from a cube in a process chain. So lets say we have a full load from an R/3 system with fiscal year 2007 in the selection using an infopackage. It gets loaded to the PSA. From there we execute the data transfer process and load it to the cube. We then execute the delete overlapping requests functionality. My question is, will the DTP know that the infopackage selection was 2007 so it will only delete requests with selections of 2007 and not 2006 from the cube? Basically, is the DTP aware of the selections that were made in the infopackage?
Thanks,
Scott

Hi Everyone,
Figure it out...on a data transfer process you can filter the selection criteria - go to the extraction tab of a DTP and click on the filter icon. Enter your seleciton conditions to pull from the PSA....these seleciton conditions will be used to delete the overlapping requests from the cube.
Thanks

Delete Overlapping Request from InfoCube.

Hello,
I am using process Type "Delete Overlapping Request from infocube" in this I am selecting object type as a "DTP"
Under "Delete Selection" I am selecting following
1. Only Delete Requests from same DTP
2. Only Delete Full DTP request
3. Only Delete DTP Requests from Same Source
I am using "Full Load" in my DTP.
My requirements are like I need to delete old data and load new data every day in to a cube for that I am using this process type.
If anybody have better solution please let me know.
Thanks,

Also
I am not deleting Index OR Not creating Indexs while using process type "Deleting overlapping request InfoCube"
what will be the impact on the cube?
How many index will have infocube?
If the cube having more than one index if i delete index, which index will be deleted?
Thanks,

Non-compressed aggregates data lost after Delete Overlapping Requests?

Hi,
I am going to setup the following scenario:
The cube is receiving the delta load from infosource 1and full load from infosource 2. Aggregates are created and initially filled for the cube.
Now, the flow in the process chain should be:
Delete indexes
Load delta
Load full
Create indexes
Delete overlapping requests
Roll-up
Compress
In the Management of the Cube, on the Roll-up tab, the "Compress After Roll-up" is deactivated, so that the compression should take place only when the cube data is compressed (but I don't know whether this influences the way, how the roll-up is done via Adjust process type in process chain - will the deselected checkbox really avoid compression of aggregates after roll-up OR does the checkbox influences the manual start of roll-up only? ).
Nevertheless, let's assume here, that aggregates will not be compressed until the compression will run on the cube. The Collapse process in the process chain is parametrized so that the newest 10 requests are not going to be compressed.
Therefore, I expect that after the compression it should look like this:
RNR | Compressed in cube | Compressed in Aggr | Rollup | Update
110 |                    |                    | X      | F
109 |                    |                    | X      | D
108 |                    |                    | X      | D
107 |                    |                    | X      | D
106 |                    |                    | X      | D
105 |                    |                    | X      | D
104 |                    |                    | X      | D
103 |                    |                    | X      | D
102 |                    |                    | X      | D
101 |                    |                    | X      | D
100 | X                  | X                  | X      | D
099 | X                  | X                  | X      | D
098 | X                  | X                  | X      | D
If you ask here, why ten newest requests are not compressed, then it is for sake of being able to delete the Full load by Req-ID (yes, I know, that 10 is too many...).
My question is:
What will happen during the next process chain run during Delete Overlapping Requests if new Full with RNR 111 will already be loaded?
Some BW people say that using Delete Overlapping Requests will cause that the aggregates will be deactivated and rebuilt. I cannot afford this because of the long runtime needed for rebuilding the aggregates from scratch. But I still think that Delete Overlapping should work in the same way as deletion of the similar requests does (based on infopackage setup) when running on non-compressed requests, isn't it? Since the newest 10 requests are not compressed and the only overlapping is Full (last load) with RNR 111, then I assume that it should rather go for regular deleting the RNR 110 data from aggregate by Req-ID and then regular roll-up of RNR 111 instead of rebuilding the aggregates, am I right? Please, CONFIRM or DENY. Thanks! If the Delete Overlapping Requests still would lead to rebuilding of aggregates, then the only option would be to set up the infopackage for deleting the similar requests and remove Delete Overlapping Requests from process chain.
I hope that my question is clear
Any answer is highly appreciated.
Thanks
Michal

Hi,
If i get ur Q correct...
Compress After Roll-up option is for the aggregtes of the cube not for the cube...
So when this is selected then aggregates will be compressed if and only if roll-up is done on ur aggregates this doesn't affect ur compression on ur cube i.e movng the data from F to E fact table....
If it is deselected then also tht doesn't affect ur compression of ur cube but here it won't chk the status of the rollup for the aggregates to compress ur aggregates...
Will the deselected checkbox really avoid compression of aggregates after roll-up OR does the checkbox influences the manual start of roll-up only?
This check box won't give u any influence even for the manual start of roll-up....i.e compression of aggreagates won't automatically start after ur roll-up...this has to done along with the compression staus of cube itself...
And for the second Q I guess aggregates will be deactivated when deleting oveplapping request if tht particular request is rolled up....
even it happens for the manual deleting also..i.e if u need to delete a request which is rolled up and aggregates are compressed u have to deactivate the aggregates and refill the same....
Here in detail unless and until a request is not compressed for cube and aggregates are not compressed it is anormal request only..we can delete without deactivating the aggregates...
here in urcase i guess there is no need to remove the step from the chain...
correct me if any issue u found......
rgds,

Delta DTP and Delete Overlapping Requests

Hi,
Please check the article:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10339304-7ce5-2c10-f692-fbcd25915c36
-Vikram

Hi
In the Delete Overlapping Requests from Infocube Process there is an button Deletion Selections Check what are all the options selected in that there are some 3 check boxes like
a) Only Delete Requests from Same DTP
b) Only Delete Full DTP Requets
c) Only Delete DTP Requests from Same Source
if option B is checked it will work only for Full Requests not for Delta. Check the same in your system.
Thanks

Delete overlapping requests from infocube

Hi ALL,
I have loads to infocube from 5 diffrent infopackages loading adhocly or randomly from same source sytem and same infosource.
Note:infopackages have dynamic selections.(ex calweek,product)
My requirement: If i load infopackage-1 today,and when i load the same infopackage next time the prevoius load should be deleted .
I need the same functionality for other 4 infopackages.
So at given point of time i should have only 5 requests in the infocube.
These are the settings i have done.
1)At infopackage level i have selected option Delete existing requests : overlapping
   Without selecting any conditions like infosources,source sytem are same.
2)Added process type in the process chain delete overlapping requests from infocube
   selected option: Delete existing requests : overlapping.
   Without selecting any conditions like infosources,source sytem are same.
Are these settings are enough or is there in best way to do this .
Please suggest me ...

Kishore,
Delete overlapping requests means, delete request with same selection only. If data selection not same, i dont think it will delete any previous request.
You can select infosource, source system. No issues. System only deletes request if data coming from same infosource or from same source system for same selection.
But in your case selection changing every day or for every load. I dont think it works.... Try once in DEV.
If i understand correctly, as you only needed latest 5 requests only, why cant you delete data completely before loading / starting new set of requests...?? This is easy, quicker and better approach.
But only problem is data will not be available during loading of new set of requests.
Srini

What is process type like delete overlap request

Similar Messages

Maybe you are looking for