What is setup table?

Hello,
         I want to know that what is set up table and how can i load the data from the setup table in to my DSO or infocube.please throw some light on these.

Hi,
As said in the previous post its the intermediate table between Logistic tables and Bw. We have some drawbacks in LIS thats y we have replaced Information structure with the Setup tables. When u run the Full or Init load in BW then the data will be extracted from the setup tables. Before this u have to fill setup tables by doing the statistical setup. By using the Tcode OLI*BW star will be replaced with the specific application componant.
Search in SDN u will get lot of threads
Khaja

Similar Messages

  • What are setup tables and why do you need to run it

    Hello Gurus,
    I know the steps for setting up the LO cockpit exactors.
    My question is what are the parameters that you feed into the Setup table filling screen --- like the doc numbers, start date and end date.
    Why do we have to run the setup tables?
    If I give the start date for setup table run for SD as 08/24/06 and end time Nill and others parameters blank, then would the set up job run for ever. Is this how you set it up in production environment.
    Does setup mean, bringing the data from application table to extraction structructure?
    Regards
    Simmi

    Hi,
    Look at the threads below :
    SetUp Tables
    setup tables
    setup tables
    setup tables
    Cheers,
    Kedar

  • What do exactly mean by 'document is lost' while filling setup table

    Hi ,
    In various threads its mentioned that, while extraction of logistics data .. say sales billing document, the document is 'lost', if its posted/changed while filling setup table . Hence we need to have system downtime while filling setup table.  So my questions are as follows :
    1)What exactly do u mean by 'Document is Lost'?  (I mean the document entries,will always be there in application tables ).
    2)Suppose we have DSO in "Over Write" mode at first level (after datasource). Will we need system downtime for filling setup table?  (I read n some forum that overwrite mode DSO at first level eliminates the need for system downtime)
    Please let me know your opinion on above questions
    Regards
    Mohit
    Edited by: Mohit Gupte on Jan 23, 2010 9:12 AM

    Hi Mohit,
    1) If document created/changed during filling of setup tables, it will not be available in corresponding extract queue and therefore not be available for delta update. Right?
      Sorry ,the answer is 'No' , because if you make any changes at the time of filling the set-up table, then those changes will be captured either in the set-up table or in the extraction queue and hence you will not miss any documents.Condition is ,you have to use 'Queued delta' .If you use 'Direct delta' then you miss the documents becasue of 'no' extraction queue .
    All documents are permanently stored in your application tables(VBRK,VBRP etc) always , but at the time of filling the set-up tables these documents will be collected from the application tables and will be moved to set-up table and then the changes will be stored in the extraction queue. At the time of set-up table running,new/changed documents will be stored either in the set-up table or in the extraction queue .So if you follow the correct loading method,you will not miss any documents.
    2)However these documents (changed/created during setup run) will be stored in application tables (VBRP & VBRK, in case of sales billing). Hence we can always retrieve consolidated list of such documents , by querying 'CREATED ON'/'CHANGED ON' fields of base tables. Then we can upload these consolidated records, via Full Repair Requests , to BI data targets. So documents are not permanently lost.
    Yes. Antyime later you can retrieve the records even if you missed at the time of loading.
    Hope it clears your doubts.
    Thanks.

  • What is the use of setup tables in LO extraction

    Hi Friends,
    What is the use of setup tables in LO extraction, what is the functionality of setup tables
    Thanks in advance

    hi,
    to prepare data to be extracted to bw,
    more details take a look Roberto's weblog
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    hope this helps.

  • What are the different "Setup tables" in OF?

    Hi all,
    what are the different "Setup tables" in OF?
    SOMASI

    setup is depends on the various tables, for example the key flexfield structure data stores in the fnd_flex_values and the gl segments data stores in the gl_code_combinations. You have to go through from each setup.
    Srini C

  • What does it mean by deleting the Content of the setup table when LO cockpi

    Hi all:
        what does it mean by deleting the Content of the setup table when LO cockpit ? why should we do it?  why set up tables ?
    Thank you very much!!!
    Edited by: jingying Sony on Jun 7, 2009 4:46 AM

    Hi Jingying Soni,
    Data sources in LO cockpit have a seperate exctraction source during full update mode and delta update mode.
    During delta update mode(when an transaction is posted in any particular application - like SD - sales orderm delivery) data is posted in application tables and updated alongside to the update table/extraction queue.
    From the extraction queue this data is further transfered to the delta queue using periodic background jobs.The data is then upladed in BW. The delta lad always reads data from this delta queue.
    However, when a full load is requested from the BW, the data is sourced by the set up table of the corresponding application.
    The setup table is loaded/initalized first. In this initialization process , it reads data frm the corresponding application tables and stores it within this table. Later BW reads from this set up table whenever full/initial load is requested.
    The process of filling set up able before full load request frrom BW is called set up run.
    Before you run a set up to fill the set up tables you need to check that the set up table is empty.
    If it is still containing data that was previously loaded in some other set up run. This data will als get loaded in BW unitinetionally/accidentally.
    So, you need to ensure that you only get the intended data in BW. This can be done by proper selections to transfer data from application tale to set up table and from setup table to BW.
    Along with this you hae to ensure that the set up table is either empty or you are using a disparate selection in the set up run and BW load which does not overlap with the previous set up runs data.
    Hope it helps,
    Best regards,
    Sunmit.

  • What are logistics and setup tables?

    Hi,
    What are logistics and setup tables?? How are these two related?
    Regards,
    Sneh

    Hi,
    Logistics is the management of the flow of goods, information and other resources, including energy and people, between the point of origin and the point of consumption in order to meet the requirements of consumers (frequently, and originally, military organizations). Logistics involves the integration of information, transportation, inventory, warehousing, material-handling, and packaging, and occasionally security. Logistics is a channel of the supply chain which adds the value of time and place utility.
    setup tables- are used to full the data for logistic applications.setup table are used for initialization and full loads.As there will be large number of data for logistic application first it will be fetched into setup tables then from there it will be used for initialization and full loads.
    Regards,
    Ravi

  • Whats the Actual use of the Setup table apart from the Full/Init  loads

    Hi  guru's
      could u explain  whats the Actual use of the Setup table apart from the Full/Init  loads  in Lo Extraction

    Hello Guru,
    The Setup table is used mainly for storing the Historical data whereas the new and changed records will be maintained in the Update table.
    By storing the Historical data in the setup table you don't need to disturb the Application table anymore.
    Please go through the following blogs
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
    https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
    Hope it helps
    Thanks,
    Chandran

  • What other datasources require building setup tables

    1)Hi I would like to find out if there are any other datasources in other application areas that require a build of setup tables and then
    facilitate deltas ?
    2)what are the standard data sources for PP, QM, WM most commonly used.

    Hi,
      Only LO cockpit datasources require filling up of datasources. You can check transaction LBWE, it should give you a complete list.
    For PP, most common datasources that I have come across are 2LIS_04_P_COMP and 2LIS_04_P_MATNR
    For QM, 2LIS_05_QE1 and 2LIS_05_QE2, for WM which i think is the same as MM, its 2LIS_03_BF and 2LIS_03_UM.
    Hope this helps,
    Regards.

  • What is the transaction to fill Setup tables for 2LIS_08TRFKZ

    Hello Friends,
    I am using OLI8BW setup table transaction for 2LIS_08TRFKZ extractor. Is this transaction correct?  Its not just working.
    Thanks
    Simmi

    why don't you go through the menu if you're not sure about the transaction code?
    SBIW > Settings for Application-Specific DataSources > Logistics > Managing Extract Structures > Initialization > Filling in the Setup Table > Application-Specific Setup of Statistical Data > LES - Shipment Costs - Carry Out Restructure
    then launch it and follow menu
    System > Status
    it will tell you the transaction code (= VIFBW)

  • Error while filling setup table

    Hello all
    I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
    could anyone tell me what this error is referring to ?
    thanks

    Hi DK.............
    I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
    Exchange rate table is TCURR.
    Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
    Regards,
    Debjani...........

  • SOME DOUBTS IN SETUP TABLES

    HI,
    TO ALL BW GURUS,
    I WANT TO KNOW THE ARCHITECTURE OF SETUP TABLES.
    WHAT IS THE MAIN DIFF'S BETWEEN NORMAL TABLES AND POOLED AND CLUSTERED TABLES.
    2.
    WHAT IS PSEUDODELTA.
    WHERE IT IS USED AND WHAT IS THE PURPOSE OF THIS DELTA.
    THANKS
    ANAND.

    Hi,
    check the beow link for table types:
    http://help.sap.com/saphelp_47x200/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
    regards,
    raju

  • Can you help with Tcode to fill this SETUP table? not working for me.

    Hi,
    For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
    I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
    1. Can you  help me with the tcode to fill the setup table for 2LIS_11_VASCL?
    2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
    2LIS_11_VAHDR                     Sales Document Header Data
    2LIS_11_VAITM                     Sales Document Item Data
    2LIS_11_VAKON                     Sales Document Condition
    2LIS_11_VASCL                     Sales Document Schedule Line
    2LIS_11_VASTH                     Sales Document Header Status
    2LIS_11_VASTI                     Sales Document Item Status
    2LIS_11_V_ITM                     Sales-Shipping Allocation Item Data
    2LIS_11_V_SCL                     Sales-Shipping Allocation Schedule Line
    2LIS_11_V_SSL                     Sales Document Order Delivery
    Thanks

    Ok,
    I tried that and it basically bring you to OLI7BW as suggested above.
    1. At this point, how do you know which of these it is actually filling:
    2LIS_11_VAHDR Sales Document Header Data
    2LIS_11_VAITM Sales Document Item Data
    2LIS_11_VAKON Sales Document Condition
    2LIS_11_VASCL Sales Document Schedule Line
    2LIS_11_VASTH Sales Document Header Status
    2LIS_11_VASTI Sales Document Item Status
    2LIS_11_V_ITM Sales-Shipping Allocation Item Data
    2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
    2LIS_11_V_SSL Sales Document Order Delivery
    2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
    Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
    Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
    Thanks

  • Strange error while filling setup tables for purchasing

    hi experts,
    while filling setup tables, job is getting cancelled. when I check in sm37 message is
    Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
    Job cancelled after system exception ERROR_MESSAGE
    It is for only the 8th month of 2009. If I run for other dates it is succesfull.
    I am not able to understand what it mean. 
    Pls guide me how to resolve this.
    regards,
    rajesh.

    hi
    according to sven check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
    EUR Conversion to USD
    may help you.

  • Error while uploading setup table

    Hi experts,
       while loading the setup table for PO , I am getting the below error.
        "No extraction structure active or no BW connected"
       what could be the problem and how to rectify this but the stucture is active in LBWE
    Thanks in advance
    sai

    Hi,
      this issue can be resolved in two ways.
    1. Check ur RFC connections in both BW system n R/3 System.Goto sm59 in both r/3 n in bw..select the logical system(i.e..ur source system) test the connection...if the connection is ok..then goto RSA5,activate the data source and do the same in LBWE as well..
    2. if the connection is not ok..check ur logical sys..in Transaction SALE...there is a possible of changing ur logica ystem too...kindly check it out..
    hope this helps..
    thanks...

Maybe you are looking for