What is the best config permutation for iPv6 on my Airport for Back to my Mac?

Hello,
I have an iMac (mid 2007), and an Air (October 2008) and am using the Airport Extreme 802.11n (gigabit ethernet).
I am stuck behing my apartment's apparently IPv6-less network (router is in bridge mote to avoid double-NAT) and am wondering:
What are the correct selections among those permutations in the IPv6 section of the settings to allow Back to My Mac to work best?
Ideally, I'd like to be able to let the iMac sleep ad wake with the Magic Packet over WAN, but have had mixed results.
If you can let me know what all those local-link etc settings mean for my setup, that would be great.
Thanks in advance,
David

If you need Windows as your main operating system you would be better off buying a Real Windows PC.
Running windows on a Mac is always a compromise. Whether in a Boot Camp partition or in a Virtual Machine.
In boot camp you can't easily Re-Partition and or Re-Size the drive it is installed on. You can't use both graphics cards as Apple has limited Windows to use the discrete graphics only, that is if your mac has 2 graphics cards (15" MBPs), which will shorten the battery run time in Windows.
The trackpad only has limited functions in Windows, less then is available on the Mac side and a real Windows PC.

Similar Messages

What is the best way to set up an external drive for video storage

What is the best way to set up an external drive for video storage?

Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

What is the best way to record a video(not big) for free on a mac w/isight?

What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
Thanks.

Hi Carolyn,
you can use iMovie to record a video for free on a Mac with iSight.
1. Open iMovie HD
2. Choose “Create a new project”
3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
5. Press “Record with iSight” in the main picture window.
6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
7. You are done!
iMac G5 PPC 2,1 Ghz Mac OS X (10.4.8)

What is the best way to make a list of addresses for envelopes or labels? Address book, numbers or pages?

What is the best way to make a list of addresses for envelopes and labels? Address book, Pages or Numbers?

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

[Flex 4.5.1] What is the best way of adopting a flex built website for mobile "as is"?

What is the best way of adopting a flex 4.5.1 built website for mobile "as is"?
I have a website built with flex 4.5.1 which I want to be working on mobile as it should - meaning that touch style of interactions should be working not mouse.
The question is: Do I HAVE TO recode all of my website from Application into Mobile Application in order to be a more lightweight version of the original one, which includes: remove some functionality, pages, animation, build a separate backend and cms to control it etc.?
OR
Can I just define mobile skins, for my existing components to use when in mobile mode, in which I could have done some tweaking by removing some unnecessary parts and changing component interactionMode to Touch ?
Are both options which I see possible and if yes - which one would you recommend?
Thanks in advance!

Thanks for the answer. Yeah I bet you figured out what I want the answer to be, but is it ? That's why I am asking here. I can see my website on my HTC Desire HD and it's working pretty well. If I reskin the parts that need a bigger hit area or the scrollers to work with touch so I don't have to scroll the actual scrollbars with my finger, remove some complex animations - everything will work just fine... The problem is that I am not sure if that is the right way to do it or if it is possible at all.
I do get your point about not designed for mobile stuff, but while with html 5 you get the job done for web and mobile with little differences at the same time, in flash you need double time cause you'll have to build 2 projects. And since the framework is one for both web and mobile.. why not...
I want to see the pros and cons of the both approaches I suggested. In a complex modular architecture I could easily swap one web module with a mobile module for example or change skins or components if I need more lightweight ones, but do I have to copy all that logic in to a MobileApplication, can't I do it with Application and use the MobileComponents (which are simplier and less functional) if the project actually needs them...
I do hope you get why I am asking these questions, and I can't believe I haven't found a guide or something like that "why this and not that" when it comes to mixing web with mobile development and flex... If you have, please share the link, I would be happy to read. Or someone with the experience in what I am talking about shares some knowledge, that would be great!
Thanks.

What is the best way to keep high res when saving "for web"

the files i'm saving for web so i can get them in jpg (or gif) format are coming out very pixelated. this is when i print the image.
what is the best way to save for web an image and keep the resolution good.
using for a business card template. avery template will let me attach images i want to the project. to do this.. i "get file from computer" and it drops the image in but real small... then you are supposed to enlarge it onto your work however you want. well when i enlarge this image file, it gets pixelated badly. i'm thinking it's the way i'm saving it. i do not adjust anything when i save. maybe i should. this is where i need guidance.
this is what avery template notes about the images i am allowed to use - When uploading the image, the maximum size allowed is 4 MB. You can only upload JPG and PNG images either as RGB or CMYK. so when you recommend things, can you please keep this in mind
thank you for oyur time.

Aida,
When you save with the default template using save for web it is generally a very low settings.
While in the save window you can define the pixel size of the image you want with quality as well as resolution too.
Refer to tv.adobe.com video save for web or Adobe help file for detailed instructions.
Mandhir

What is the best way to detect peak to peak voltage for the following waveform ?

I have two channels of waveform train ( ie W1 & W2 ), each of them is of frequency 64KHz.
Each channel of waveform train consists of sinewaves of 64KHz of fixed amplitude, say 2 V pk to pk, running for 100 cycles, and then rest for 0.15 sec continue with a sinewave of 64KHz of another fixed amplitude, say 1 V pk to pk running for 100 cycles as well, and then rest for 0.15 sec. The above cycle considered as a complete waveform cycle.
The above complete waveform cycle repeat for 10 cycles and rest for 1.3 sec and repeated itself.
From the two simulated waveforms (ie W1 & W2), I need to detect and measure the peak to peak voltage of each of the 100 cycles sinewaves.
What is th
e best way to achieve that ?

The waveform is free running as described above, ie sinewave running at approximate 64 KHz for about 100 cylce at fixed amplitude, say 2V ( actual number of cylce unknown, could slightly more or sightly less, depanding on the machine ) then rest for approximately 0.15sec, another sinewave running at approx. 64KHz at fixed amplitude, say 1.5V ( actual number of cylce unknown, could slightly more or sightly less, depanding on the machine ) running for approx 100 cycles continue...then rest for approx. 0.15 sec .....the above waveform repeated itself and free running .....I would like to capture or trigger each of the 100 cycles sinewave (rest time of 0.15 sec between each approx100 cycles of sinewave) to measure the peak to peak voltage and st
ore them in array for analysis purpose....what is the best way to achieve that as I do not have time reference, I only know that the waveform is running at the pattern described above.
Thanks for your help !

What is the best high res image file format to use for print

Dear All,
I'm working on a 300 + page catalog, and I was wondering what would be the best image format to use on the catalog. I thought png was the best since it supports background transparency and all, but for some reason I'm not able to export it once I change the image to CMYK ( since I need CMYK for print ). Should I save all in eps. instead? Please help would be appreciated.
thanks,
Jack

.psd is the best... supports everything you would want for print. PDF does also, but takes a little more knowledge to use properly.
.png is recommended when using Word etc.
EPS is obsolete.

What's the best way to master an MPEG 2 file for DVD Studio Pro.

In version 4.5 of FCP I was able to use QuickTime conversion to encode to MPEG2. Now that option is not there. I hate using compressor 2 to create MPEG 2 because when I do the MPEG 2 files always seem to studder and I don't know why. I shot my project in HDV. It is about 64 minutes long. Any suggestions on the BEST way to master an MPEG 2 file for DVD Studio pro? Thanks in advance!
Peter
PS - I'm using FCP 5

Some people have reported a field reversal problem with HDV to SD DVD encodes. There's an Apple technical document on this issue somewhere, but the problem was supposed to be addressed by a Pro Applications update a couple of years ago... This site might help you get to the bottom of the problem.
http://www3.telus.net/bonsai/Step-by-Step.html

What is the best way to do a double page spread for a magazine?

I'm in the process of putting together a magazine and would like to do some double-page spreads in it, but my printer has requested that the magazine be sent to him as single pages. If I set it up as 'facing pages' and then change it to single pages when I've finished, will this upset my double page layouts??

Set it up as facing pages, then when you make the pdf DO NOT CLICK SPREADS.
When you click Spreads you are asking InDesign to produce a PDF where page 2-3 are joined, and 3-4 are joined etc.
When you don't have Spreads selected then Indesign produces Single Page pdf.
A single page is what is required by a printers with the pages running in reading order from page 1 - finish (for example).
Do not attempt to impose the document yourself.
Remember to include your crop marks and your bleed.
Sidenote on crop marks and bleed:
Crop marks are needed to trim the page to size when printed. As printers can't print right to edge of a sheet, and that it's near impossible to trim a sheet of paper right to the edge of a colour - the colour needs to extend past the crop line, this is called bleed.
When you bleed the document, i.e., extend any item that is tucked right against the foredge (the edges opposite the spine), then you need to extend this object off the page into a "bleed" area.
This allows for human error when trimming the paper, as each sheet is not trimmed individually (that would take forever!) they are stacked on top of each other and trimmed in stacks. It would be impossible to stack all the sheets exactly even, and there is movement on the press, so compensating for the movement and the fact they can never be stacked exactly even - for this reason you need objects to extend past the edge of the page.
The crop marks tell the guillotine operator where to trim the sheet. Once they have the measurements in their guillotine machine it's a simple matter of rinse and repeat with as many stacks of paper there are.
And printers can sometimes fold and trim a print job folding machine, and since it's a machine and you have to account for mechanical errors and human error, you need bleed too.
Bleed is important - If you don't add bleed then the object stops at the foredge of the paper. And if the blade trims/crops close to the object but misses by a sliver - then you have a sliver of white on the printed piece, which is highly undesirable.
So you need crop marks so the printers know where exactly to cut the paper, and to cut into the bleed so that you don't have slivers of white.
And yes you need crop marks even if you don't have bleed, if you don't have any bleed it's likely that the edges of the paper are just white, so there are no markings where to cut to give the correct size that you want. So crop marks need to be included no matter what.
And the placement of crop marks is important. As I said earlier, crop marks are for letting the guillotine operator know where to trim the page so that it cuts into the bleed area. The bleed area to allow for mechanical, physical and human error. And seen as the bleed can sometimes be included in a final printed piece it is not desirable to have anything other than bleed objects in the bleed area.
For this reason you offset your crop marks to be outside the bleed area. As I'm in Europe I work mainly in millimeters, so I would set my Bleed Area to be 3-5 mm (check with your printers for what bleed you should allow) and I would set my crop marks to Offset by 1 mm more than the Bleed (i.e., 4 - 6mm).
This ensures that the crop marks do not encroach the bleed area. If your crop marks do encroach the bleed area you run the risk of the crop marks appearing on a final printed piece.
So in Summary
Make sure you have bleed where necessary on your document.
Add the desired amount of bleed - in my case 3-5 mm.
Offset the crop marks so they don't encroach the bleed area - in my case 4-6mm.
(bleed depends on the printers requirements - then make sure you offset your crop marks to be outside the bleed area).
Message was edited by: Eugene Tyson
Correction to mm in Summary

What is the best way to export to achieve clear video for the internet?

Is it best to just use a preset? or are there other ways to get that clear look that you get when you watch the high def mp4 straight out of the app...?
I notice that some video is much more detailed and higher res looking...but when i upload to youtube it doesnt quite look as good...blurry... especially with smaller sizes...
Any suggestions?
Thx in advance.

i agree with you Jim.
but i didnt do that.
shot at 24p. never went anywhere near 30 for any of it. i exported at 23.987 because i read somewhere that that might be better for web video...cant even remember where...also my exports from AE were all 24p. i guess i will just keep it the same across the board.
i just wander if i use the animation codec out of after effects, full on lossless, if it would improve anythiing for the final render. I used an avid codec for export out of after effects for a better file size for the clips i put into premiere. seemed to work alright. then use h264 playback codec when i exported the final.
there is just such a difference in quality for some of the reels i see. i want that quality. clarity.

What is the best way to make an IPad mini safe for kids?

I am looking to purchase an IPad Mini for my son who is 9years old. I am hoping to find out what settings or software I can employ to help make the internet safer for him. He would like to search his ideas and projects but i am concerned about what inappropriate things he may stumble upon. Any help?

There are some restrictions you can make. Settings>General>Restrictions.
See also the manual:
https://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
But, realistically, if you give your child access to the internet, they will, eventually stumble upon something you might find inappropriate. As with any tool that could potentially be dangerous but that you want your child to learn how to use, proper supervision is key.
Best of luck.

What is the best way to match clip and sequence settings for real-time editing?

I am a long time FCP user and trying to make the After Effects workflow a little smoother by utilizing the Adobe suite.
One of the most valuable things I miss about FCP is that when I drop a clip in a blank sequence (no matter what the settings of the seq) it will ask if I want to match the settings of the clip. This ensures that no rendering is required to quickly edit the video in real-time.
Is there a plugin or function in Premiere CS4 that I am missing that will afford me this feature? Currently i am doing everything I can to match the clip settings when creating a sequence, but sadly i'm still having to render the timeline to preview the edit.
lh

And in CS4, if there is not a matching Preset, you can choose the Desktop Preset, which will allow you to customize nearly every attribute to match your source footage. The name is a bit of a misnomer, but has been around for a long time. I would have called it the "Custom Preset," but Adobe never called.
Good luck,
Hunt
PS - I just learned something new about CS5 from Curt, because of your question - thanks!

What is the best way to display list of software titles for sale?

I am a small retailer that would like to display a list of approximately 15-30 software titles in the most professional way (with prices).
Can anyone recommend a layout that would serve this purpose, the ones in the template just don't seem to cut it.
If anyone wants to email me an example, I'd really appreciate it.

Probably your best bet would be to browse the websites or catalogs of other software stores to see what strikes you as professional, and use that as an inspiration to design your own.
Also, there are many websites with additional iWork templates--here's one:
http://www.iworkcommunity.com/
and google turns up more.
I can think of a few different ways to present a list of 15-30 software titles with prices (one column, two column, sub-categorized by maker, sub-categorized by function, sub-categorized by sale vs. regular price), but only you have the knowledge to know what system is most likely to appeal to your customers and match the overall graphic presentation of your store.

What is the best USB 3.0 Expresscard 34 card available for older MBPs?

Title says it all. I'm looking to buy some new external hard drives, preferably ones with USB 3.0, but I'm going to need an Expresscard to plug into my MacBook Pro to fully utilize the new and improved speeds. I've seen a couple so far but they didn't seem to offer support for OS X, which as you can imagine, would be problematic. Has anyone had any experience with this and if so, is there a recommended card that I should look into? Much appreciated.

If such a card were available and worth having on a Mac, I except that Other World Computing would stock it. I just looked at their Express34 offerings and they do not show any.
The fastest current option is probably eSATA; several such cards are shown here:
http://eshop.macsales.com/search/express34
They support up to 3G/sec. I recently bought a Western Digital MyBook Mac Edition and it have USB 2.0, FireWire 800, and eSATA interfaces. That and an eSATA card would be about as fast as you can get today.
A Wikipedia article on USB 3.0 says this:
A new major feature is the "SuperSpeed" bus, which provides a fourth transfer mode at 5.0 Gbit/s. The raw throughput is 4 Gbit/s, and the specification considers it reasonable to achieve 3.2 Gbit/s (0.4 GByte/s or 400 MByte/s), or more, after protocol overhead.
As the "reasonable" expectation is just over 3G/sec, eSATA could be pretty close and is something you can implement today.

What is the best config permutation for iPv6 on my Airport for Back to my Mac?

Similar Messages

Maybe you are looking for