What is the best way to re-install my apps data when changing the hard disk

My MacBook (120Gb disk) is finally full and I have ordered a 500Gb disk to replace it.
I am fine with changing over the disk but can anyone tell me the best way to reload all my apps and data from the present disk please?
I have a Time Machine backup on a Network disk, a copy of SuperDuper and also my original 10.5 OSX install disks.
Thanks

Roger, since you have SuperDuper, I think the easiest thing to do would be to make a clone of your current hard drive to the new one when it arrives. You will need an external enclosure for the new drive; make sure it's formatted to Mac OS Extended (Journaled); Disk Utility will do this for you. Then connect that new drive via firewire or USB, and create the clone from your current drive using SuperDuper. Next, remove the internal drive from your Mac, insert the new drive and boot up. You can then place your older drive in the external enclosure to use for extra storage, though it won't be large enough to use as a cloned backup with SuperDuper.
Good luck!

Similar Messages

What is the best way to share music wirelessy at home using a external hard disk?

We would like to find the best way we can access wirelessly our music track stored on a external hard disk at home? We would it to be able to access them by using MAC, PCs, iPads, Android and iphones.

Personally, I use MobileMe and let my family watch the movies on line. It is easy to share this way. I share the movie in Large (960x540) or Medium to iTunes. Then I share to Mobile Me.
For personal viewing, I use the Apple TV.
You can also burn a data DVD of your finished movie, and let them copy the file to iTunes from their data DVD.
You can upload the movie to other video sharing services such as YouTube or Vimeo.
You can burn a blu-ray disk if you have Toast and a BluRay burner. You can burn a short movie to regular DVD media using Toast and a regular DVD burner that is playable on most BluRay Players.

What is the best way to have access to OSX and OS9 from the same machine?

What is the best way to have access to OSX and OS9 from the same machine?
Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
G5 Mac OS X (10.4)

And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

What is the best way to deal with different audio sample rates on the same timeline ?

what is the best way to deal with different audio sample rates on the same timeline ?

You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

What is the best way to transfer all of my data from my iPod touch 3rd generation to my iPhone 4s?

I have a 3rd generation iPod touch, and now I am getting an iPhone 4s. What is the best way to transfer all of my data, including paid-for apps and music, from the iPod to the iPhone without losing anything? Can I just do it through iTunes or the iCloud? I have never used iCloud before.

Follow the directions here:
http://support.apple.com/kb/HT2109

What is the best way to import word documents from a PC to the Ipad2

What is the best way to import word documents from a PC to the Ipad 2?

You first need an app on the iPad that supports word documents - the iPad doesn't have a file structure like a 'normal' computer, and every file/document needs to be associated with an app. If you don't have such an app then options include Apple's Pages app and third-party apps such as Documents To Go and QuickOffice HD. How you then get the documents on the iPad will depend upon the app that you have/get as different apps may use different methods e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

What's the best way to (re)install Logic Studio? Need Help.

I bought Logic Studio a few months ago and installed it on my new MacBook Pro 2.4Ghz with 2G Ram, 160G hard drive @ 7200 rpm. Being new to Logic, at install, I just put all 40+ gigs of content on the computer. After a while I considered putting the Apple Loops (roughly 12gigs) onto an external hard drive to save space on my computer, just to see if it would work, then consider moving more content over later. After doing this the Logic application couldn't find the Apple Loops, and I couldn't find a way to help it see the new path, so my Apple Loops were essentially rendered useless (since I had already deleted them from the computer). So I stopped right there, and haven't done anything else. Just worked with Logic without using Loops, which I have to say is still an incredible program.
What also seemed strange was this: In moving the Apple Loops, the available disk space on the computer didn't seem to change much. It went down a few gigs, but not the 12 or so I was expecting. Not sure why that is. It seems like Logic and all the content is actually taking up around 50 gigs or so on my computer (and the Apple Loops are supposedly gone or not available). What is that about?
Feeling like I had really fouled things up, I called Apple Care. They said that the content of Logic is stored in many places in the computer's libraries and system folders, but it was really confusing trying to locate all of it, because the info they sent was from Logic 7 and older versions of GarageBand. I guess Logic 8 is too new for them to have anything on it. There is no uninstall for Logic Studio. But they strongly recommended that I perform an Erase and Install, and then re-install all my software including Logic, and then assign the hard drive I wanted the content in. That would open up a lot of the computer's hard drive space, they said. It seemed like an extreme measure to take for such a small blunder, and I haven't tried it yet, but will if it's the best option.
If I do this, is running Logic content (i.e. Loops, Impulse Responses, Jam Packs, etc.) from an external hard drive (and the one I have to use is 5400rpm--is that too slow or am I getting too picky?) the best way to go, or should I have all Logic material coming from the same machine? How do I get some of my hard drive space back?
Ugh.
Has anyone out there experienced this too? Is there anything documented about where the content is stored for Logic Studio? Is Erase and Install really the best thing to do in this situation?
So many questions...
Thanks.

Hey Blue,
Let me see if I can help you a bit.
Logic Studio has 28+ gb of loops. Almost 23 for STP and 6 for the Jam Packs, etc. They should be located in /Library/Audio/Apple Loops/Apple (that's the default install loc.). Copy them to an external drive and then delete them from your main drive. Go to /Library/Audio/Apple Loops Indexes and delete those text files. Now go to /Library/Preferences/Soundtrack Pro and delete those text files, too (more Loop Indexes).
Now open Logic Pro and it will say 'No Apple Loops found'. Click 'OK' and then open your Loop Browser. Drag all the Jam Pack folders, STP folder, etc. that you want to use onto the Loop Browser. Logic will ask you if you want to 'Copy to Loops Folder' or 'Current Location'. Choose 'Current Location'. Logic will now index the loop folders.
NOTE: You can change the names of the folders to suit your liking. For example: I added the 2, 3, 4, 5 after the Jam Pack names to make it look smoother on the popup menu and changed iLife Sound Effects to Sound Effects - iLife and Apple Loops for STP to STP. Now the Jam Packs 1-5 come up first on the popup menu and the FX stay at the bottom. I likee!!
Now, if you like you can take your EXS Factory Samples and Ultrabeat Samples, 3.35 & .889 gb respectively, and copy them to an external drive. I have mine in the same place as my Jam Packs, etc. You can find these files in /Library/Application Support/Logic. Toss out the originals and put ALIASES from the external drive back into the /Lib/App Sup/Logic folder.
Also, if you open STP and click the Search tab in the right pane you will see a button that says 'Setup' next to it. Click that and you can use the checkboxes in the window to activate/deactivate any of the loop folders available.
A clean install is the best IMO if you have a little time because a) you DO NOT have to install GB at all (that saves the .aif file size - Logic Studio uses .caf files at half the size of the originals) b) Logic Studio will install the extra GB or Logic 7 content if you need it at it's reduced size. It will basically get rid of all the old clutter that you do not need. Only install what JP's you want and move the bigger stuff to an external.
Rock up Logic and it should all be in place. That procedure saved me 32.5 gb on my main drive.
NOTE #2: You have another 12 gb (if you installed all Jam Packs) that reside in the /Library/Application Support/GarageBand/Instrument Library/Sampler. These are the Jam Pack Instruments & Sampler files for World, Symphony, etc. They cannot be moved from the startup HD (as far as I can tell). So keep that in mind if you don't want a certain JP.
Hope that helps,
Dave

What is the best way to re-install Windows XP in Boot Camp?

I installed Windows XP on my Boot Camp partition on my MacBook for several months. Recently I have had serious problems with Windows Explorer (If I right click or try to copy, delete, drag files, it crashes). I've decided to just to do a clean install of XP and start over. What is the best way to do this?
I realize that I can just remove the partition through Boot Camp assistant, but I have read people on the web have had some issues doing this. I've read that to Erase and reformat the Windows partition" is easier to do.
There is also something called "Perform a Repair Installation" inside Windows XP. This would be preferable because I think this would allow all my applications to stay present. I don't have problems with my applications, just Explorer. Can I do this inside my Windows partition as if it were a normal Windows computer? This would be the best solution if it's possible.

Axel,
Unfortunately System Restore didn't work. I tried a few dates, but what happened is it said it couldn't restore and that my computer remained unchanged. So I will move on to the next stage. Reinstall Boot Camp drivers (I don't think that will help because they've worked flawlessly for so long) and then do a REPAIR WINDOWS.
But I am going to wait until the weekend when I don't have work and can make sure I have a full backup, plus numerous other things, like doing uninstalls on some programs so that I can reinstall them should I end up with a totally complete new installation.
My experience with Windows over the decades is that a lot of their utilities don't work as promised. That's what just happened with System Restore. So if I have a problem with REPAIR WINDOWS, do I just format my windows drive within Windows and reinstall, or what? Do I have to go back to OS X, eliminate the Windows partition, and start at the beginning with a new BootCamp and Windows installation? I'm asking, because once I get started I want to have a full road map.
Also to clarify, this is with my MacBook. I have no problems with Windows on my Mac Pro.
Thanks for your help.

Upgrading to SSD, what is the best way to clean install and transfer my files over?

I am upgrading to an SSD and I would like to start clean by doing a fresh installation of Yosemite on the new drive. However, I still want all of my personal files from my current hard drive, like my music, music libraries, photos, and Home folder, transferred over to the new drive. What is the best way of doing this?
I have Time Machine and a Time Capsule. Could I simply restore a Time Machine backup, or will that defeat the purpose of doing a clean install?
Should I just back up the home folder and transfer the home folder onto an external drive, then drag the home folder to my new drive? Will that save my iTunes playlists and music?
I don't need to transfer apps over so I'm not worried about that. Just my documents, files, pictures, music.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
      logo appears.
5. Wait for installer to finish loading.
Boot From a Recovery HD:
1. Restart the computer.
2. Immediately after the chime press and hold down the
      "COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.
After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard, Snow Leopard and later.)
For Lion or later select Disk Utility from the Utilities Main Menu.
After Disk Utility loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the Disk Utility status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If Disk Utility reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD on the external drive, then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the Utility Main Menu, then click on the Continue button.
2. After Disk Utility loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the Disk Utility main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition/Apply button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Check the box labeled Erase destination.
4. Select the destination volume from the left side list and drag it to the
      Destination entry field.
5. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

What is the best way to read and manipulate large data in excel files and show them in Sharepoint

Hi ,
I have a large excel file that has 700,000 records in it. The excel file has a few columns that change every day.
What is the best way to read the data form the excel file in fastest and most efficient way.
2 nd Problem,
I have one excel file that has many rows each row contain some data that has certain keywords.
What I want is to segregate the data of rows into respective sheets(tabs ) in the workbook.
for example in rows have following data
1. Alfa
2beta
3 gama
4beta
5gama
6gama
7alfa
in excel
I want there to be 3 tabs now with each of the key words alfa beta and gamma.

Hi,
I don't really see any better options for SharePoint. SharePoint use other production called 'Office Web App' to allow users to view/edit Microsoft Office documents (word, excel etc.). But the web version of excel doesn't support that much records as well
as there's size limitations (probably the default max size is 10MB).
Regarding second problem, I think you need some custom solutions (like a SharePoint timer job/webpart ) to read and present data.
However, if you can reduce the excel file records to something near 16k (which is supported rows in web version of excel) then you can use SharePoint Excel service to refresh data automatically in the excel file in SharePoint from some external sources.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

What is the best way to store and search 2D data

Hi,
There is a set of data (~10k records ) in 2D dimension.
like this :
Col 1, Col 2, Col3....
What is the best way to store and search those records ?
Thanks in advance
Wilson

Hi,
Either userObjet[][] if you know how much data you have, and the data size is fixed, or use a list of lists. E.g. A Vector of Vectors (some will probably say that you should use an ArrayList instead, and that could be the case, but it sounds like you would want to display the data later on, and a DefaultTableModel (for JTables) uses a Vector as data holder).
Kaj

What is the best way to drop and recreate a Primary Key in the Replication Table?

I have a requirement to drop and recreate a primary key in a table which is part of Transaction replication. What is the best way to fo it other than remove it from replication and add again?
Thanks
Swapna

Hi Swapna,
Unfortunately you cannot drop columns used in a primary key from articles in transactional replication. This is covered in
Make Schema Changes on Publication Databases:
You cannot drop columns used in a primary key from articles in transactional publications, because they are used by replication.
You will need to drop the article from the publication, drop and recreate the primary key, and add the article back into the publication.
To avoid having to send a snapshot down to the subscriber(s), you could specify the option 'replication support only' for the subscription. This would require the primary key be modified at the subscriber as well prior to adding the article back in
and should be done during a maintenance window when no activity is occurring on the published tables.
I suggest testing this out in your test environment first, prior to deploying to production.
Brandon Williams (blog |
linkedin)

What is the best way to write 10 channels of data each sampled at 4kHz to file?

Hi everyone,
I have developed a vi with about 8 AI channels and 2 AO channels... The vi uses a number of parallel while loops to acquire, process, and display continous data.. All data are read at 400 points per loop interation and all synchronously sampled at 4kHz...
My questions is: Which is the best way of writing the data to file? The "Write Measurement To File.vi" or low-level "open/create file" and "close file" functions? From my understanding there are limitations with both approaches, which I have outlines below..
The "Write Measurement To File.vi" is simple to use and closes the file after each interation so if the program crashes not all data would necessary be lost; however, the fact it closes and opens the file after each iteration consumes the processor and takes time... This may cause lags or data to be lost, which I absolutely do not want..
The low-level "open/create file" and "close file" functions involves a bit more coding, but does not require the file to be closed/opened after each iteration; so processor consumption is reduced and associated lag due to continuous open/close operations will not occur.. However, if the program crashes while data is being acquired ALL data in the buffer yet to be written will be lost... This is risky to me...
Does anyone have any comments or suggestions about which way I should go?... At the end of the day, I want to be able to start/stop the write to file process within a running while loop... To do this can the opn/create file and close file functions even be used (as they will need to be inside a while loop)?
I think I am ok with the coding... Just the some help to clarify which direction I should go and the pros and cons for each...
Regards,
Jack
Attachments:
TMS [PXI] FINAL DONE.vi ‏338 KB

One thing you have not mentioned is how you are consuming the data after you save it. Your solution should be compatible with whatever software you are using at both ends.
Your data rate (40kS/s) is relatively slow. You can achieve it using just about any format from ASCII, to raw binary and TDMS, provided you keep your file open and close operations out of the write loop. I would recommend a producer/consumer architecture to decouple the data collection from the data writing. This may not be necessary at the low rates you are using, but it is good practice and would enable you to scale to hardware limited speeds.
TDMS was designed for logging and is a safe format (<fullDisclosure> I am a National Instruments employee </fullDisclosure> ). If you are worried about power failures, you should flush it after every write operation, since TDMS can buffer data and write it in larger chunks to give better performance and smaller file sizes. This will make it slower, but should not be an issue at your write speeds. Make sure you read up on the use of TDMS and how and when it buffers data so you can make sure your implementation does what you would like it to do.
If you have further questions, let us know.
This account is no longer active. Contact ShadesOfGray for current posts and information.

What is the best way to re-install my apps data when changing the hard disk

Similar Messages

Maybe you are looking for