What is the circled number one under my drive icon on the desktop? I recently hooked up an external LaCie drive and hope I didn't partition my main drive somehow by mistake.
I noticed after installing an external LaCie Drive, that a circled number 1 appears under my drive icon on the desktop that was never there before. I have a iMac G5. I go to Disk Utility at times to erase or burn a disk. Could I have somehow partitioned my hard drive or what / why is that number appearing or is it normal? Thanks and I hope I didn't screw up the drive cause I'm a newbie and would hate to have to delete and reinstall. Could I have a tired machine? I have lots of GB's left and machine at times acts strange like will record something and default it to iMovie slide show unless I wasn't careful what file was open at the time. Can you tell me what the number means?
Try renameing it, but you might also check this...
n Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474
Similar Messages
-
What is the best way to hook up an external monitor? Im having some issues!
Up until now I have been able to use my external monitor while editing. I recently got a 20" HDTV with HDMI and a jack to use it as a computer monitor. I notice that once I set my VIEW option to ALL FRAMES in FCP, it will only show me a frame at a time until I stop the playhead then the shot will pop up wherever I stopped the playhead.
The set up:
I have a Caldigit 4TB Raid that i use for editing. I have a FW800 going from that to my G5 Powermac. I also have a FW400 coming out of the Caldigit to my Sony GVD-1000 MiniDV deck (only using this as a "pass through"). I have S-Video/RCA audio coming out of the Sony to the jacks on the 20" HDTV.
Now I was getting a picture but it was showing me a frame at a time. Now it won't show me anything at all not even on the Sony GVD1000 deck. ALL FRAMES is still set in FCP. I am not sure why I cannot see my work in real time on the other monitor or see it period for that matter.
Device Control is set to FW basic which turns my screen black. However when I select another option other than FW Basic, it turns my screen blue so that right there tells me that the computer is talking to the monitor.
As for Graphics card, I am using the ATI Radeon 9600. Last night I hooked up a custom made DVI to HDMI cable and nothing happened aside from desktop icons completely left the screen. Maybe I need to set it up to Mirror the other screen before I hook that cable up or something. Still doesn't explain my issue with FCP.
I do NOT have a AJA or Matrox breakout box and Im thinking I probably will need that. Perhaps my problem could be everything is digital till the signal gets to the Sony deck, i am coming out that deck with analog signals to the monitor.
Any suggestions?
Before I bought the HDTV, I had a regular SD monitor and never had any issues with seeing my work on it while I edited.
I am working with footage shot in 720p and I am using the correct HD codec to edit with so I am not sure why I cannot view my work on my external monitor.
Thanks!Your setup works fine for DV, because you used a DV deck and most likely DV footage. But now you are working with 720p HD footage (what format, BTW? HDV, dvcpro HD?). That same setup won't work for monitoring HD. Now you need an HD box or card to send out a proper HD signal. And since you have an older G5, you won't find any current solutions. You'll have to look at used capture cards that are PCIx. Or you and look at the Matrox MXO, that connects to the computer via a monitor connection. DVI.
-
What are the commands available to read a file from application server and
What are the commands available to read a file from application server and store the file into an internal table?
Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
What is the best way to set up an external drive for video storage
What is the best way to set up an external drive for video storage?
Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them. -
What is the best way to hook up a telephone line to an i- mac so I can receive faxes directly to my computer?
I tried usb modems. They worked ok for 32 bit usb's but Lion only allows 64 bit. I bought one from Best Buy and it works when it wants to. Mostly, it doesn't want to!
Is there a way to connect through a time capsule?Thanks for that!!
Zoom - 56K V.92 USB Mini External Data/Fax Modem
I didn't look any further than this. I bought this at Best Buy and like I said, it works somesimes. It does not trigger the fax automatically when the phone rings. You need to have it manually answer. In the past, I had the 32 bit Apple version of this external USB modem and it worked without issue. -
Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck. -
What is the impact on an Exchange server when moving FSMO role and schema master into another DC? What do we have to do on exchange after performing a such task?
I had 1 DC (Windows server 2008 R2), 1 Exchange 2010 SP3. I install a new DC (Windows server 2008 R2). I then move all the FSMO role including the schema master role into the NEW DC. I check to be sure that the new DC is a GC as well.
I shutdown the old DC and my Exchange server was not working properly and specially Exchange Management Shell. It start working again after I turn up the older DC.
I am wondering why Exchange did not recognize the new DC, even after moving all the roles on it.
I am looking to hearing from you guys.
Thanks a lotif you only have 1 DC, you might need to cycle the AD Topology service after shutting the one down.
Also, take a look in the windows logs, there should be an event where Exchange goes to discover Domain Controllers, make sure both are listed there. You can probably force that by cycling AD topology (this will take all services down so be careful
when you do it)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
What are the most important tables in SD, MM, PP, FI , CO and QM?
Hi all,
What are the most important tables in SD, MM, PP, FI , CO and QM? i.e. most used.
Thanks,
Charles.
+++++++++++++++++<b>In FI:</b>
BKPF Accounting documents (Header)
BSEG Item level
BSID Accounting: Secondary index for customers
BSIK Accounting: Secondary index for vendors
BSIM Secondary Index, Documents for Material
BSIP Index for vendor validation of double documents
BSIS Accounting: Secondary index for G/L accounts
BSAD Accounting: Index for customers (cleared items)
BSAK Accounting: Index for vendors (cleared items)
BSAS Accounting: Index for G/L accounts (cleared items)
<b>In SD:</b>
VBAK Header data
VBAP Item data
VBPA Partners in sales order
VBKD Sales district data
VBEP Data related to line items, delivery lines
VBRK header data
VBRP Item data
LIKP Delivery header
LIPS Delivery item
VTTK Shipment header
VTTP Shipment item
VTTS Stage in transport
VTSP Stage in transport per shipment item
VTPA Shipment partners
VEKP Handling Unit - Header Table
VEPO Packing: Handling Unit Item (Contents)
<b>In MM:</b>
EKKO Purchase document
EKPO Purchase document (item level)
EKPV Shipping-Specific Data on Stock Tfr. for Purch. Doc. Item
EKET Delivery schedule
VETVG Delivery Due Index for Stock Transfer
EKES Order Acceptance/Fulfillment Confirmations
EKKN Account assignment in purchasing
EKAN Vendor address purchasing
EKPA Partner functions
EIPO Item export / import data
EINA Purchase info record (main data)
EINE Purchase info record (organisational data)
EORD Source list
EBAN Purchase requisition
EBKN Purchase Requisition Account Assignment
MKPF material document
MSEG material document (item level)
MARA Material master
MAKT Material text
MARC Material per plant / stock
MVKE Material master, sales data
MARD Storage location / stock
MSKA Sales order stock
MSPR Project stock
MARM Units of measure
MEAN International article number
PGMI Planning material
PROP Forecast parameters
MAPR Link MARC <=> PROP
MBEW Material valuation
MVER Material consumption
MLGN Material / Warehouse number
MLGT Material / Storage type
MPRP Forecast profiles
MDTB MRP table
MDKP Header data for MRP document
MLAN Tax data material master
MTQSS Material master view: QM
<b>In QM:</b>
QALS Inspection lot record
QAMB Link inspection lot - material document
QAVE Inspection usage decision
QDPS Inspection stages
QMAT Inspection type - material parameters
QINF Inspection info record (vendor - material)
QDQL Quality level
QDPS Inspection stages
<b>In PP:</b>
AUFK Production order headers
AFIH Maintenance order header
AUFM Goods movement for prod. order
AFKO Order header data PP orders
AFPO Order item
RESB Order componenten
AFVC Order operations
AFVV Quantities/dates/values in the operation
AFVU User fields of the operation
AFFL Work order sequence
AFFH PRT assignment data for the work order(routing)
JSTO Status profile
JEST Object status
AFRU Order completion confirmations -
What's the correct way to set up an external style playing keyboard
Hi
what's the correct way to set up an external style playing keyboard?
i want the keyboard to use the Logic's voices, and also to record the midi that is being inputed.
I can do it on One Channel, but when I selct multiple channels, all the channels seem to play all of the input data!!!
anybody??Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them. -
Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?
For small amount of files, a regular USB stick or drive, it's already formatted with a MBR and FAT32 most likely which works both on PC's and Mac's.
External drives if you need more space.
However FAT (or Fat32 or MSDOS) has a 4GB file size limit. So if your transfering files bigger than that then you need to format it exFAT on the Windows machine.
Vista and Win 7 can do this, Windows XP one can download a free exFAT upgrade from Microsoft.
Mac's can read/write the MBR and FAT/exFAT (10.6.5 and later) formats, it's best to format it on the Windows machine, even though the Mac can format it too, it's better to do it on Windows then take it to the Mac to confirm.
Rack your brain here on it.
https://discussions.apple.com/message/16317478#16317478 -
What is the best wireless printer to use with an IPad Air and IPhone?
What is the best wireless printer to use with an IPad Air and IPhone that will print both text and photos? Also, is the separate keyboard available for the IPad Air, yet?
Best is relative. Different people like different things. I have an epson that I like. I'd look through a site like Best Buy and compare reviews for Air Print enabled printers.
as to the keyboard, I know Zagg has one and I think there are other manufacturers that have keyboards for the Air. As far as I know, pretty much any bluetooth keyboard will work, but if you want a case then you'd need to get a specific one. -
Just got girlfriend a new iPad2. Her iMac is a PowerPC G5 (Tiger version 10.4.11) with 512 mb RAM. What's the simplest, most efficient way to get her iPad2 up and running and synced to her Mac?
Most of the Apple store sales people and some of the genius bar people are only knowledgable on Apple's more recent offerings. They are not very knowledgable, I found, on older PowerPC based Apple computers, I'm afraid.
Here's the real scoop.
Your girlfriend's G5 can only install up to OS X 10.5 Leopard. This is the last compatible OS X version for PowerPC users.
OS X 10.6 Snow Leopard and OS X10.7 Lion are for newer Intel CPU Apple computers.
Early iMac G5's can only have up to 2 GBs of RAM.
Later iMac G5's (2005-2006) could take up to 2.5 GBs of RAM
2 GBs of RAM will run OS X 10.5 Leopard just fine.
The very latest iTunes (10.5.2) can be installed and runs on both PowerPC and Intel CPU Macs.
However, there are certain new iTunes feature that won't work without an Intel Mac.
One of iOS and iTunes feature is sync'g wirelessly over WiFi.
This will not work unless you have an iDevice running iOS 5 and Intel Mac running 10.6 Snow Leopard or better.
Although, I was disappointed I would not be able to do this with my G4 Mac, it's not a biggie problem for me.
So, your girlfriend's computer should be fine for what she intends to use it for.
The Apple people either just plain didn't know or we're trying to get you to think about buying a new Mac.
At least, as of now, not truly necessary.
If Apple, at some later point, drops support for PowerPC users running 10.5, then would be the time to consider a new or "newer" Intel CPU Mac.
My planned Mac computer upgrade is seeking out a " newer" last version G5 for my "new" Mac.
I can't afford, right now, to replace all of my core PowerPC software with Intel versions, so I need to stick with the older PowerPC Macs for the time being. The last of the G5's is what I seek. -
Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !
See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2 -
My iPod Touch is te 4th generation with iOS 4 only... The desktop that it used to connect with was broken and I couldn't update my iPod touch as all content is linked to the iTunes on that broken PC. What should I do?I don't want to erase all my music recording. (couldn't back up easily...) my dairy, my financial record made on apps...
If I got a new Mac book pro soon, would it helps backuping everything?awesome121, he does not an an iCloud account. You need iOS 5 or later for iCloud and the poster said he has iOS 4.
awesome121 wrote:
DO you have a icloud account? -
Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access
Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
Maybe you are looking for
-
Saving the table content into one excel sheet
Hello, I have got following problem: I'm measuring data with a DAQ card. I'm interested in the min and max value of the measured data. Therefore I'm using the Amplitude and Level measurent function. Its no problem to display the results in the graphi
-
JDev 10g and EJB 2.0 on non-OC4J server
It looks like JDev 10g only supports EJB 2.0 for OC4J out-of-the-box. Is this correct? If we wanted to generate EJB 2.0 CMP entity beans etc to deploy to a non-OC4J app server (e.g. JBoss) using JDev 10g, what would we need to do? Are there any tutor
-
WRT54GS and wireless phone interference
Up until a few days ago, I had a 2.4 GHz wireless phone system in the house but was getting constant "clicks and taps" on the phone. Since the wired phones operated fine and had no intereference, I figured it was the router. Changing the channels did
-
Conditional Formula to supress page header in 1st page of the report
hi, how to programatically add a conditional formula to supress a section only on the first page of the report. i am using CR XI R2 RAS server. thanks in advance Padmanaban V
-
I've never once printed on photo paper. Always use black draft whenever possible, but for reasons I've never understood the photo cartridge depletes. I'm at the point where the regular black ink is streaking. But, the clean heads utility won't wor