What is the data flow in B.I

What do we have in the Attribute master data.
What are the different types of infopackages.

Hi,
1) Attributes describe master data like a customer. The country where the customer resides, the industry etc. describe and classify the customer. Attributes are not just the structure/metadata of the characteristics. They are also the content. The following table should visualize what i mean:
customer-no. | name
112 | mcpherson inc.
113 | donalds inc.
2) I think, you are asking about the laods from infopackage. We dont have types of infopackage. But we have one thing called Infopackage group, You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
Basically there are three types of loads in Infopackage
Full Upload: This will bring all the records in the BW irrespective of how many times you load.
Init Delta: In this you have 2 options: a) Init with data transfer and b) Init without data transfer. Init without data transfer will just setup your delta and when you do the delta load it will bring all the records. Init with data transfer is similar to the full upload. This brings all the records for the first time and will also setup the delta process. Once the Init is done; you have to do delta for all the subsequent loads.
Delta: This will bring only the changed / modified / added / deleted records from the source to BW.
Hope it helps..
Regards
Lavanya

Similar Messages

  • What is the Data flow in SAP-BPC NW

    Hi All,
    Could any body explain me how the data is flowing in SAP-BPC NW.
    and what are the steps for Planning
    and what are the steps for Consolidation
    Regards,
    Setty

    Hi,
    1) Attributes describe master data like a customer. The country where the customer resides, the industry etc. describe and classify the customer. Attributes are not just the structure/metadata of the characteristics. They are also the content. The following table should visualize what i mean:
    customer-no. | name
    112 | mcpherson inc.
    113 | donalds inc.
    2) I think, you are asking about the laods from infopackage. We dont have types of infopackage. But we have one thing called Infopackage group, You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
    Basically there are three types of loads in Infopackage
    Full Upload: This will bring all the records in the BW irrespective of how many times you load.
    Init Delta: In this you have 2 options: a) Init with data transfer and b) Init without data transfer. Init without data transfer will just setup your delta and when you do the delta load it will bring all the records. Init with data transfer is similar to the full upload. This brings all the records for the first time and will also setup the delta process. Once the Init is done; you have to do delta for all the subsequent loads.
    Delta: This will bring only the changed / modified / added / deleted records from the source to BW.
    Hope it helps..
    Regards
    Lavanya

  • In Order To Cash cycle what is the data flow.

    hi,
    I want to know that Bank Reconciliation Statement (BRS) in Cash Management, do they come back to AR in any form and data goes to GL direct from Cash Management or it comes back to AR and then goes to GL.
    Thanks,
    Magesh

    Hi Magesh,
    Here is how it works
    1) Accounting entry for Create transactions
    DR Receivables
    CR Revenue
    2) Create Receipt and apply this receipt to the above transaction
    DR Cash Clearing ( Here we are assuming that the receipt will be cleared after reconciling with the Bank Statement)
    CR Receivables
    3) When you reconcilie this receipt with the Bank Statement using Bank Reconciliation, the accounting entry is
    DR Cash
    CR Cash Clearing
    (The net effect of Cash Clearing is Zero after reconciliation)
    Entry no: 3 is created in AR. Cash Management does not transfer any accounting entry to GL.
    Hope this helps.
    Thanks,
    Anil
    Blog: http://oracle.anilrpatil.com

  • What are the data targets for 0EC_PCA_1 and 0EC_PCA_3?

    Hi,
    I am looking at help.sap.com but not able to find out the data flow from these two datasources.
    0EC_PCA_1 (Profit Center Accounting - transaction data) and 0EC_PCA_3 (Profit Center Accounting - Line Item).
    What are the data targets and further flow for these data sources?
    Thanks,
    Akshara

    Hi,
    Data source  - 0EC_PCA_1 and cube - 0PCA_C01
    Data source - 0EC_PCA_3 and Cube - 0PCA_C01.
    you can use same cube for two data sources.
    Standard multi providers - 0PCA_MP01 and 0PCA_MC01.
    Thanks

  • How to automate the data flow to content servers?

    We have ECC connected to CS. Could you help tell how to automate the data flow into the CS? Thanks a lot!

    What do you use the Content Server for? If its for archiving you need to run the STORE job to send the data to the CS.
    I can't see a reason to automate that process
    Regards
    Juan

  • Are unique GUIDs required in the data flow task in SSIS?

    Hi,
    I have previously used SQL server 2008R2 to develop packages.  I was told not to copy and paste packages, or create templates with tasks on the data flow because this leads to multiple packages with the same GUID, the consequence of this might be calamitous
    problems at runtime when the engine can't distinguish between tasks in different packages.
    My process was to create templates with Control flow tasks only, manually create the dataflow tasks and then use bids helper from codeplex to regenerate GUIDs (this regenerated the GUIDs at the control flow level only).
    I am now using SQL 2012. I have looked and seen that if I copy and paste a package the GUIDs at the data flow level are also copied.  So my questions are:
    1) Does having the same ID in different dataflows cause problems as I was led to believe?
    2) If it does has this been addressed in some way in SSIS 2012? and what is the best way of working around this given I have many similar packages to develop?
    Thanks,
    Dan

    SSIS doesn't really lend itself well to creating templates.
    SQL 2012 is much improved when it comes to copy and pasting tasks, dataflows and transformations between package designs, other than the usual issues with missing connection managers.

  • How to run just the data flow

    We are in the process of converting from one ETL tool to Data Services 3.0.  I have a workflow with several data flows underneath it and have to make a change to the data flow.  Is there a way to run just the dataflow without executing the whole job?  For example, I just want to run DF4 below.
    WF --> DF1 --> DF2 --> DF3 --> DF4 --> DF5
    Thanks,
    Dan

    Although this topic is solved, just a few clarifications:
    When you create a new job and drag 'n drop the workflow/dataflow into it, you are not creating a second object (class), you are calling the object a second time (instantiate). It is like a BASIC program. I created a sub-procedure and called in DF1. In my filesystem I can see that sub-procedure as a seperate file in the folder object_library -> dataflow_procedures.
    Then I have two main programs, both just calling that sub-procedure with "gosub DF1".
    In the job you see the calls, when you drill into DF1 you see its definition and what object it calls.
    Using a conditional is okay but not adviced in my opinion. You are losing too much, the handling is complex and development takes a few seconds longer. my two cents only.
    https://wiki.sdn.sap.com/wiki/display/BOBJ/Testing

  • What is the business flow of SD

    hi
    what is the business flow of SD

    Hi
    SD FLOW
    SD Flow Cycle and T Codes:
    INQUIRY ( VA11)
    |
    QUOTATION (VA21)
    |
    PURCHASE ORDER (ME21)
    |
    ORDER CONFIRMATION (VA01)
    |
    PICKING LIST – (VL36)
    |
    PACKING LIST - (VL02, VL01)
    |
    SHIPPING – (VT01)
    |
    INVOICE – (VF21, VF01)
    |
    AR
    Explantion with relavent tables:
    Enquiry - Customer enquires about the Products services that were sold by a company - VA11
    Quotation - Company Gives a Quotation for the products and Services to a Customer
    Sales Order - Customer gives a Purchase order to the company agaionst which a Sales order will be raised to Customer in SAP.
    VBAK: Sales Document(Header Data) (VBELN)
    VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
    Enquiry, Quotation, Sales Order are differentiated based on Doc.
    Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
    for Quotation 'B' & for Order it is 'C'.)
    Delivery(Picking, Packing, Post Goods Issue and Shipment)->
    Company sends the material after picking it from Godown and Packing it in a Handling Unit(box) and Issues the goods
    LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
    LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
    (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
    Billing - Also company bills to the customer for those deliveries
    And in FI against this billing Accounting doc is created.
    VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
    VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
    (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
    Apart from these tables there are lot of other tables which starts with
    ‘V’, but we use the following tables frequently.
    Links for sd:
    http://www.sapgenie.com/abap/tables_sd.htm
    Please check this SD online documents.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCSD/CAARCSD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_SD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLISPLN/LOLISPLN.pdf
    Also please check this SD links as well.
    http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
    http://www.sap-basis-abap.com/sapsd.htm
    http://www.sap-img.com/sap-sd.htm
    http://www.sapgenie.com/abap/tables_sd.htm
    http://searchsap.techtarget.com/featuredTopic/0,290042,sid21_gci961718,00.html
    http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html
    All help ebooks are in PDF format here
    http://www.easymarketplace.de/online-pdfs.php
    Regards,
    Priyanka.

  • Need to check the data flow from R/3 to BW server.

    Hi BI experts,
    This query is regarding need to check the data flow from R/3 to BW server.
    As of now I have some set of reports which I would need to take up in BW. The requirement is  to go through the list of transaction codes for reports in R/3 and find out if there are already  any existing objects in BW system which I can use for these reports.
    So, can u plz help me.

    Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
    Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
    ~AK

  • What is an ageing report? What are the data sources used to develop an agin

    Hello BW gurus,
    I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
    Thank you.
    TR.
    •     Developed AR ageing report, created invoice layout and processed invoices.
    What is an ageing report? What are the data sources used to develop an aging report
    •     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts. 
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    •     Involved in the end to end implementation of BW at Reliance Group as a team member.
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
    a full life cycle project?
    •     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
    What are aggregates why do you need them?
    •     Prepared design documents from the Business Requirement documents and identified the
    relevant data targets for satisfying the customer requirements.
    What are the design documents does one prepare, please give an example. 
    Is cube a data target?

    What is an ageing report? What are the data sources used to develop an aging report
    Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
    customer (credit)  for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
    What data sources does one use to get Balance sheet and P&L accounts tables and fields.
    For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
    What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
    Requirement gathering, blueprint creation, development etc
    Refer to posts on Sap Methodology  and Sap lifecyle
    What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
    Please check these links
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
    What are the design documents does one prepare, please give an example.
    Design document is basically a document to say  how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets  to be used and how data shld be stored  for providing the client a solution they need.
    Is cube a data target?
    Yes cube is a data target.
    Hope this Helps
    Anand Raj

  • What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

    What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
    Please help me out.
    thanks,
    sapsdnhelp

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • What is the data usage for ipad mini on stand by when connected to WIFI?

    We connected 34 ipad mini's for yacht WIFI network that has internet access. Now data usage is 1GB/h higher for the all connections than before.
    None of the ipad's are used for internet. My question is what is the data usage when ipad is is standby usage and how I can stop is downloading/uploading.
    This slows down internet for rest of the users in same network.
    Please help.

    Check out this Apple article -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    It'll walk you through uninstalling iTunes and the other Apple software.

  • What is the Data Rate of the Cache in Adobe Premiere CS6

    Hi,
    Trying to build a raid array to edit with and want to know how much speed i need for caching read/write drive for premiere and After Effects. I'm of the impression that the cache doesn't need more than a single 7200rpm drive (~120MB/s) but really i have no clue what the data rate that adobe caches to is or what the data rate to read is
    so it's 2 questions
    how fast does premiere write the cache? (i know this is system dependent but a ballpark figure would be good for say a sandy bridge i5 2500k system with a 2 raid 7200rpm drive)
    and
    what's the data rate to read the cache in a 1080 24p file?
    also, when doing the final export does premiere/after effects read from the Cache or the original files or both?
    thx,
    Jayson
    youtube.com/AWDEfilms

    ok i've figured out the physics of this question.
    The Cache Read data rate is always larger than the Cache Write data rate, because the computer would have to be rendering to Cache faster than realtime for the Write rate to be higher, which would make it unnecessary to render to cache in the 1st place. So I'm really only worried about the Cache read data rate. Does adobe have a paper that tells us what the data rate is for different sequences.
    my 3 common workflows are
    canon h.264 1080 24p
    AVChd 1080 24p from my GH2 with a 44mb
    and
    r3d 5k epic footage 24p - (this is painful to edit )
    anyone know where this info is?
    thx,
    Jayson
    youtube.com/AWDEfilms

  • What is the "Data Transfer Process" in the BI7.0, and how does it work?

    Hi, experts !
    I'm fresh on BI7.0.
    What is the "Data Transfer Process" in the BI7.0, and how does it work?
    And what is it used for ?
    Could anyone help me? Plz send me some doc.
    [email protected]
    Thank u !

    HI,
    Refer this blog
    /people/community.user/blog/2007/06/22/sap-netweaver-70-bi-data-transfer-process-dtp-blog-series
    Also refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    Thanks

  • What is the data throughput in labview. I want to use the parallel as acheap digital i/o to drive a stepper motor.

    I am trying to use the parallel port on a win xp machine to send data a@ up to a 3k rate. This is for the the purpose of driving a stepper motor. I have tried the port.out vi and placed this vi in a loop and it on a scope it looks like I am limited to a a 200hz rate. What am I doing wrong??? Can labview do this or is it too slow ???
    Thanks

    snook wrote:
    > what is the data throughput in labview. I want to use the parallel as
    > acheap digital i/o to drive a stepper motor.
    >
    > I am trying to use the parallel port on a win xp machine to send data
    > a@ up to a 3k rate. This is for the the purpose of driving a stepper
    > motor. I have tried the port.out vi and placed this vi in a loop and
    > it on a scope it looks like I am limited to a a 200hz rate. What am I
    > doing wrong??? Can labview do this or is it too slow ???
    Basically the way the Port I/O VIs are implemented they call through a
    device driver for each port access. This slows down the maximum port
    accesses to something like 1000 times per second depending on the speed
    of your CPU.
    There is a way to do it faster but that is a little more trick
    y. The
    idea is to use a device driver to enable particular port addresses to be
    accessed directly from the application level instead of always going
    through the kernel.
    I have written such a VI library and accompagning DLL and device driver
    and made it available on OpenG. It is not yet part of the standard
    binary distribution packets so you will have to get it from the CVS
    repository.
    Go to:
    http://cvs.sourceforge.net/viewcvs.py/opengtoolkit/portIO/built/portio/
    and download all the files in there including the ones in the
    subdirectory "ogportio.llb" and if you like "docs"
    If you want the nitty gritty technical details you can also look at
    http://cvs.sourceforge.net/viewcvs.py/*checkout*/opengtoolkit/portIO/c_source/Description.htm?rev=1.5
    On my 866 MHz Pentium mobile I can increase the number of port accesses
    in this way from 440 ms for 4000 read byte port accesses (100us ms per
    access) to 20 ms for the same number of read accesses (5 us per access).
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

Maybe you are looking for

  • Error while creating BOM with FM CSAP_MAT_BOM_MAINTAIN

    Hi All, While creating the bom with the FM "CSAP_MAT_BOM_MAINTAIN" using change number i am getting the below error message. " Processing of this object is not supported with change number." Please help me out. Regards Suresh

  • Keyboard "tab" control in Array of Clusters

    I'm trying to polish some of my LabVIEW user interfaces so that my users can work faster in them and so that they follow more "Windows UI Standards" (or whatever). I have an array of clusters.  The cluster has 3 numerics. When a user "focusses" on th

  • S.M.A.R.T on disks in a stripe.

    I´m running my 4 hitachi on the nVidia sata controller as raid0 and I cant find any software that read´s my disk´s temperature...     Anybody know´s a software that does it? Any tip is welcome!

  • Production planning and controlling (pp) related kpi's

    Hi, friends I am new to pp module and I am in search for pp related kpi's. help to find kpi's, post me kpi's friends. thank you

  • Selection on Summary Field

    Post Author: tantk CA Forum: General I have a summary field on expenses based on month. How can i select those months(with details) who's total monthly expenses are more than $1000.