What is the Default data format for calculations???

When we create a calculation based on data points(dp) like :
SUM(dp1 + dp2)
then what Number format is applied to the calculation by default, especially the number of digits that it can show.
Is there any rule related to that in Oracle?

ok Guys, i finally found the answer. By default a calculation can show up to 10 digits of number with 2 decimal points & this issue has discovered a new Bug in all the versions of Discoverer. Oracle is going to create a bug on this issue soon.
Thanks

Similar Messages

  • What is the default file format for saving in MS Office 2013? Is it still the transitional OOXML or the ISO/IEC 29500 strict format?

    As I have read, MS Office 2013 is able to read and write the ISO/IEC 29500 strict (standardized Office Open XML) file format. MS Office 2010 was only able to read the strict format and MS Office 2007 could neither read nor write the strict format. The
    .docx, .xlsx and .pptx saved by Office 2007 and 2010 were only complying to the OOXML transitional, as far as I understood.
    My main question is what the default file format for saving in MS Office 2013 actually is? Is it still the transitional OOXML or the ISO/IEC 29500 strict format?
    In case, MS Office still saves in the transitional standard by default, is it possible to set the strict standard in the settings? Is this recommended (I assume that OOXML strict is the future) to do this?
    Thanks.

    Yes, the Transitional is still the default file format for saving in Office 2013, and we can modify this setting in Word Options, Save:
    As Alex Brown covers in his
    blog post, "Transitional is intended to preserve the fidelity of existing binary documents being migrated to ISO/IEC 29500, and includes many legacy features for compatibility with existing documents. Strict is a subset of Transitional that does not
    include legacy features – this makes it theoretically easier for a new implementer to support (since it has a smaller technical footprint, so to speak), but also makes it less able to preserve the fidelity of existing documents."
    Max Meng
    TechNet Community Support

  • Date Format in Zreport similar to the default date format set using su01.

    Dear All,
                I have a requirement as to change the date format in Zreport as the one which is set in default date format for the user in Su01 tcode.
    Ex.. If the user has set the default date format in SU01 as ' YYYY-MM-DD' , in report also, date should appear as '2009-12-24'.
    Is there any code  or  Function Module to change the date format in report as in the default Date format?
    Can u help me in this?
    Bye.....
    Cheers
    Christina.

    Try the following code.
    select the format of current user from usr01 table.
        SELECT SINGLE datfm FROM usr01
        INTO w_datfm
        WHERE bname = sy-uname.
    Format based upon the current user settings. put this total code inside one form for reusability.
        IF w_datfm = '1'.
          CONCATENATE w_date6(2) c_dot w_date4(2) c_dot w_date+0(4) INTO outtab-value.
          CONDENSE outtab-value NO-GAPS.
          CONCATENATE w_rundate6(4) w_rundate3(2) w_rundate+0(2) INTO w_date.
          CONDENSE w_date NO-GAPS.
        ELSEIF w_datfm = '2'.
          CONCATENATE w_date4(2) '/' w_date6(2) '/' w_date+0(4) INTO outtab-value.
          CONDENSE outtab-value NO-GAPS.
          CONCATENATE w_rundate6(4) w_rundate0(2) w_rundate+3(2) INTO w_date.
          CONDENSE w_date.
        ELSEIF w_datfm = '3'.
          CONCATENATE w_date4(2) '-' w_date6(2) '-' w_date+0(4) INTO outtab-value.
          CONDENSE outtab-value NO-GAPS.
          CONCATENATE w_rundate6(4) w_rundate0(2) w_rundate+3(2) INTO w_date.
          CONDENSE w_date.
        ELSEIF w_datfm = '4'.
          CONCATENATE w_date0(4) '-' w_date4(2) '-' w_date+6(2) INTO outtab-value.
          CONDENSE outtab-value NO-GAPS.
          CONCATENATE w_rundate0(4) w_rundate5(2) w_rundate+8(2) INTO w_date.
          CONDENSE w_date NO-GAPS.
        ELSEIF w_datfm = '5'.
          CONCATENATE w_date0(4) '/' w_date4(2) '/' w_date+6(2) INTO outtab-value.
          CONDENSE outtab-value NO-GAPS.
          CONCATENATE w_rundate0(4) w_rundate5(2) w_rundate+8(2) INTO w_date.
          CONDENSE w_date NO-GAPS.
        ENDIF.

  • [svn] 3148: You can now use CSS styles to set the default text format for TextView.

    Revision: 3148
    Author: [email protected]
    Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
    Log Message:
    You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
    SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
    Reviewer: Glenn
    Bugs: -
    QA: Lots of new stuff to test!
    Doc: No
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

    Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
    Thanks for taking a look though!
    Shaun

  • How can I set the default save format for photoshop edited photos?

    I just spotted that some of my photos that I've edited in Photoshop from Lightroom are a whopping 450MB. Looking deeper I found that they are saved as uncompressed TIFF files, this despite the default save format for Photoshop in Lightroom's preferences being set to ZIP compressed TIFF files. So why doesn't this setting work and how can I make Photoshop save things compressed?

    Sounds funny but first tell us what version of PS you have, what version of Lr and which OS. Thanks.

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • How to update the default date format in OBIEE 11G.

    Hi All,
    How to change the default date format in OBIEE 11g from the MM/DD to DD/MM. Could anyone please help me out ASAP?
    Thanks,
    Arpan

    Hi Arpan
    OBIEE 11g is having " localedefinitions.xml " file at this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display
    in my case i installed at C:\Oracle\MIddleware.
    so
    1- Stop BI Server from EM
    2- Navigate to this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display. in your case oracle home will be different
    3- take a backup of this file localedefinitions.xml "
    4- modify it and save
    5- bring BI Server up.
    Regards
    sher

  • What are the master data tables for 'Plant'?

    Hi friends,
    What are the master data tables for 'Plant' that contain below data?:
    PLANT
    NAME1
    NAME2
    LANGUAGE
    HOUSE_NUM_STREET
    PO_BOX
    POSTAL_CODE
    CITY
    COUNTRY_KEY
    REGION
    COUNTRY_CODE
    CITY_CODE
    TIME_ZONE
    TAX_JURISDICTION
    FACTORY_CALENDAR
    Thanks a lot!

    Hi,
    Plz try out following tables for your requirement.
    TOO1W
    ADRC
    J_1IMOCOMP
    T001W :  werks TYPE t001w-werks, "PLANT
            name1 TYPE t001w-name1, "PLANT DESCRIPTION
            adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
    ADRC:  addrnumber TYPE adrc-addrnumber,  "ADDRESS NUMBER
             str_suppl1 TYPE adrc-str_suppl1,  "STREET2
             str_suppl2  TYPE adrc-str_suppl2, "STREET3
             street TYPE adrc-street,          "STREET
             city1 TYPE adrc-city1,            "CITY
             post_code1 TYPE adrc-post_code1,  "CITY POSTAL CODE
             post_code2 TYPE adrc-post_code2,  "PO Box postal code
             tel_number TYPE adrc-tel_number,  "TELEPHONE NUMBER
             fax_number TYPE adrc-fax_number,  "FAX NUMBER
             str_suppl3 TYPE adrc-str_suppl3,  "STREET4
             location TYPE adrc-location,      "STREET5
             city2 TYPE adrc-city2,  
    For Tax Details :
    J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                              j_1icstno TYPE j_1imocomp-j_1icstno,
                              j_1ilstno TYPE j_1imocomp-j_1ilstno,
    Hope this will help.
    Regards,
    Archana

  • How do I change the default file format for saving files in Preview

    I often take screen clips and save them as files to my desktop, then upload them to my website or include them in emails. The default file format for Preview seems to be TIFF, but I'd prefer jpg. How do I convince Preview to use jpg as the default file format?
    TIA,
    Thad

    I should have been a little clearer...
    If I'm emailing a screen-clip, I can just paste it right into the email, but I post on a lot of discussion boards and it's often nice to be able to include a screen shot in those. My preferred way to do that is to post the clip at my personal website and then put a link in the post. It gives me the ability to delete the image whenever I want (a plus for any security freak) and it works on every discussion board I know. Some boards allow attachments, some don't. Plus I don't want to have to remember different d/b file attachment procedures. Anyway, when I make a screen-clip, I need to temporarily save it (usually to my desktop), then ftp it to my website. I use Preview to do that. It's simple. But I'd like it to default to .jpg instead of .png or .tiff. (FWIW, I just tried it and the default was .png, but I swear I did something similar earlier that defaulted to .tiff when I first tried to save the newly-created file).

  • To change the default date format of OID

    Hello Gurus,
    Any idea on how to change the default date format of OID?
    The default date format of OID is something like "yyyy-mm-dd hh:mm:ss .0-0700" I want to change it to "yyyymmddhhmmss.0-0800".
    Is there any system property to do the same.
    I have provisioned users from OIM to OID.
    Any ideas/clues/hints on this.
    TIA,
    - oidm.

    nobody? ?

  • What is the default payroll frequency for Pay Scale Structure ?

    Hi,
    What is the default payroll frequency for Pay Scale Structure? How is it attached to Pay Scale Structure?
    Saurabh Garg

    Hi
    The default frequency for any payroll run is 'monthly', which is subjected to manipulation according to ones requirements
    Regards
    Sudhir.

  • What is the best data type for wallet application?

    Hi Friends..
    I want to know what is the best data type for wallet application..
    Assume that, i want to the Total of money saved digitally in Applet Wallet..
    And then if there's any transaction the Total of money which saved digitally in Applet Wallet would be Subtracted or Added depends on how much money that spent or saved..
    Which one is the best implementation of these scenarios :
    1. I save the User ID and Total of money in the Java Card, and then if there's any transactions, it would be added or subtracted directly and then saved again in the Java Card
    2. Or.. I save the User ID in the Java Card whereas Total of money in the Database, and then if there's any transactions, the ID would be read from the Card, and then select the Database based on that ID, and then Add or Subtract the money depends on how much money spent in the Transaction
    Please help me regarding this
    Thanks in advance

    Hi,
    Personally I would choose to store the total amount stored on the card. You could use two shorts (short[] perhaps) to store an integer (add more shorts to increase precision) and simply handle overflow your self. You could even look into using a third party library (or class) that treats a byte array as a big integer etc. There were some posts recently on floating point arithmetic that could be helpful for you since you will probably want to use decimals and JC does not natively support floats.
    Cheers,
    Shane

  • For iPhone and Android, what is the best file format for watching videos?

    For iPhone and Android, what is the best file format for watching videos?

    You can try these setting. They are from CS5.5 but should work in CS4.
    Make sure you check Use Max. Render Quality.

  • What is the default ip address for the Time Capsule and Airport Extreme?

    What is the default ip address for the Time Capsule and Airport Extreme?

    Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

  • What is the default timeout value for the SPQuery object?

    What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
    Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

    Hi,
    Do you want to avoid timeout when you query list items?
    If so, we can use the following C# code to set timeout.
    HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
    More information is here:
    http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
    The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

Maybe you are looking for