What is the extreme minimum

I've been using linux for a few years now, but I'm still not well versed in it to answer this question for myself without breaking stuff. I wanted to know what the extreme minimum packages I need for a working linux install. I plan on using that as my base and then adding X11. I don't know what linux actually needs to run properly without screwing up and what packages might be considered needed, but really are not crucial.

brandon88tube wrote:I haven't done an Arch install in a while, but if I recall, I tried installing only a handful of packages and it seems that arch installed more and was wondering if they were really needed.
Welcome to the world of dependency management.
If you wonder whether they're really needed, only one way to find out: remove them. See what breaks.

Similar Messages

What are the real minimum requirements for Mountain Lion?

What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

What are the bare minimum required tags for DNG (digital negative) images.

I'm trying to write a program that converts a standard BMP file into DNG. I know that isn't practical for many things, but I'm curious as to what the minimum required tags are for a DNG image. The DNG specs at http://www.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/dng_spec.pdf show what tags are available, and mention whether or not a given tag is required, but this document doesn't have a list showing only the required tags. So I'm wondering, does someone here have a list of only the required tags for DNG images?

Just discovered there's a dedicated DNG section to the forum at Digital Negative (DNG) which is where this question should probably be, but don't know if think I can move this message myself. Maybe a moderator can move this post.

What are the setups required to perform any inventory transactions

Hello freinds .
What are the bare minimum mandatory setups required in order to perform any inventory transaction

H,
The steps required are as follows:
1. Define Location
2. Define Inventory Organizations
3. Define Sub Inventory Organizations
4. Define Shipping Networks
5.Define Items
These are minimum steps are required for a Inventory Transaction.
Thanks,
SYR

I am extremely upset. I purchased my iPad in SA and I am traveling in Greece. When I want to make use of the free apps, I get a message that the app is not available in the SA store. What is the point of having an iPad if you cannot use it worldwide?

I am extremely upset. I purchased my iPad in SA and now I am in Greece. I cannot download free apps as I get a message that the apps are not available in the SA store and only in US stores. When I change to the US store the same thing happens. What is the point of having an iPad if I cannot use it worldwide??? I feel that I wasted my money purchasing it as I specifically purchased it to use when I travel. How can I get access to all the available apps and why are they restricted.

You can use your iPad worldwide. However, each AppleID is tied to
a specific country's store. To use the AppStore in any country, you
must be in that country and have a credit/debit card issued by a financial
institution in that country with a verified billing address in that country.
It is the developer's choice which AppStores he makes his app available
from, and some countries prohibit certain apps.
To make a purchase from the US store (including downloading a free app
available in the US store), you must be in the US and have card issued
in the US with verified billing address in the US.
You can use your purchases from the SA store worldwide, but you
cannot make purchases in other than the SA store unless you meet
the aforesaid conditions.

How can I determine what is the minimum SCN number I need to restore up to.

Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
For example: I do a database restore.
restore database ;
RMAN> sql 'alter database open read only';
sql statement: alter database open read only
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
ORA-16004: backup database requires recovery
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
I thought this query might provide the answer, but it doesn't
select max(checkpoint_change#)
from v$datafile_header
MAX(CHECKPOINT_CHANGE#)
7985876903
--It applies a bit more redo, but not enough to make my datafiles consistent.
recover database until SCN=7985876903 ;
Starting recover at 03/16/09 15:04:54
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
using channel ORA_DISK_6
using channel ORA_DISK_7
using channel ORA_DISK_8
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=18436
channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
select file#
     , status
     , checkpoint_change#
     , checkpoint_time
     , FUZZY
     , RECOVER
,LAST_DEALLOC_SCN
from v$datafile_header
order by checkpoint_time
Thanks,
Jason

The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
Your alert.log should show the redo log sequence number at that time.
You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
A
LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
You can also query SCN_TO_TIMESTAMP -- eg
select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
Hemant K Chitale
http://hemantoracledba.blogspot.com
Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
added the LIST BACKUP command from RMAN.

What are the Specifications of Extreme Model A1354

What are the Specifications of Extreme Model A1354

If you might be thinking about purchasing a used device, you should be aware that the A1354 is going to be anywhere from 4 years to 5+ depending on when it was originally sold.
The useful life of an AirPort router is, on average, about 5 years....so you might want to give that some thought, if you are considering a purchase.

What are the minimum system requirements for GB 4?

What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
(I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
Click Here
Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?

What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
SharePoint permission levels required for the user profile?
Does the user need top level permissions on the SharePoint site?
What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
TheDrape

Hi,
To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
You don’t need any permissions for the user profile.
I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
Thanks,
Rock Wang
Rock Wang TechNet Community Support

What are the minimum db user privileges required for CDC?

What are the minimum privileges required for the source data server user in order to to successfully implement CDC
Currently I'm getting an "Insufficient privileges" error when trying to start a CDC journal on a model. The error is happening on the step that creates a trigger on the table in the source schema.
Here's the situation:
The data server uses the user "ODI_TEMP" for its connection. ODI_TEMP has been granted select privileges on the desired tables in the source schema. When starting the CDC journal on the model for the source schema, ODI tries to create a trigger on the source tables. This fails since the ODI_TEMP user can't create triggers on anything outside of it's own schema. For obvious fundamental security reasons, we cannot give the ODI_TEMP user the CREATE ANY TRIGGER system privilege on the data source.
Journalizing is set up using JKM Oracle Consistent. ODI is 11g, DB is 11g.

Hi,
You can go for this
Grant CREATE ANY TRIGGER system privilege to ODI_TMP
Start the Journal , it will create triggers in ODI_TMP schema for the tables present in your source schema.
Now revoke CREATE ANY TRIGGER system privilege from ODI_TMP.
It will continue to work .. only when you are restarting the journal (due to adding or removing some tables in CDC) , you will be requiring CREATE ANY TRIGGER privilege.
Thanks,
Sutirtha

What are the minimum CPU and Memory requirements for R12 Vision instance?

We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
We aleady know how much disk space it will need.
Dan

Hi,
See these links.
A Primer on Hardware Sizing for Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
What Are the Minimum Desktop Requirements for EBS?
http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
Also, please see old threads for similar discussion.
Hardware Requirements
http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Benchmark
http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I have a airport time capsule, an older airport extreme, and an airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

HT4260 I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?

I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.

The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired.

What's the maximum speed that AirPort Extreme can share with Wifi?

The thing is that I am going to buy a new Wifi Router, but I was considering an AirPort Extreme from Apple but is not specify what's the maximum speed of Internet connection for the Wifi to share, I know that the limit might depend on my service provider, but I don't know what is the theoretical maximum of the AirPort Extreme, does anybody knows?

1,000 Mbps on an Ethernet connection
450 Mbps on a wireless connection, assuming you have a new computer and it has line of sight with the AirPort Extreme. Otherwise, the speed will be lower due to obstructions absorbing the signal.

What is the extreme minimum

Similar Messages

Maybe you are looking for