What is the status of the Moto X Android 4.4.4 update?

None of us customers know. The reps that roam this community forum won't know either.

Similar Messages

I don't understand correlation between ACL and dACL. If dACL is downloaded to the Catalyst switch what is the status of the ACL

Understanding ISE and dACL.
I don't understand correlation between ACL and dACL.
If dACL is downloaded to the Catalyst switch what is the status of the ACL attached to physical port. Is dACL appended to the existing ACL? When I typed ‘sh ip access-list int fa0/1’ I can see only dACL for access domain and dACL for voice domain appended to the previous dACL and no ACL lines.
Regards,
Vice

Hi,
Downloadable ACLs (dACL) are applied from your RADIUS server based on authentication and authorization policies. It overrides any standard interface ACL.
Standard interface ACLs are in place to limit traffic on the port before 802.1x or MAB authentication.
When an authenticated session terminates on the interface the standard ACL will be re-applied until the next authentication.

Change the status of the notification center in iPhone programmatically or atleast read what the status is for a particular application

Is it possible to control and change the status of the notification center in iPhone for a particular application.
1)      In the application push notification is implemented.
2)      Once this application is installed we can see the app in the notification center.
3)      There is an option to ON or OFF
4)      In the application we need an option to check if the above option is ON or OFF.
5)      If the option is OFF we need to provide the user an alert stating that in the notification center has it option off and here we have to provide an option to user to switch ON the option at the notification center.

Well, I could find a fix for that.
My mistake was that 1: I wasn't getting the correct ntype code for my value list type. And 2: I wasn't giving the Id name.
The new result came as this:
statusObjRef = doc.getStatusRef();
statusHome = IBeanHomeLocator.lookup(session,statusObjRef);
status = statusHome.findUniqueByNameType("Drafting Agreement", 1);
doc.setStatusRef(status.getObjectReference());
In case anyone has this problem, you should check the collection of values internal id, that's the actual ntype code (the number you send on the second parameter).
But I could still use help having some advice on the Master Agreement elements handling (getting data from the master agreement or the data thas is being edited at the moment before saving).
If anyone could give some advice, they would be very welcome

What's the status of the Sales Deal(KONA-BOSTA:Status of the agreement)?

Hi Experts,
I have a requirement that the status of the Sales Deal must be equal to "D" (Final settlement of agreement already carried out). Who can tell me how to implement this?
Thanks & Regards.
Kelvin

Hello,
The Agreement Status (KONA-BOSTA ) field can be set manually by the
user. The user can manually change the status field to 'A' or 'B'.
But the status 'C' or 'D' cannot be set manually.
Let me explain the flow :-
1) When the agreement is created , the Agreement Status (KONA-BOSTA)
field is empty.
2)If the user wants to go for settlement , then the status can be
directly changed to 'B' which means now the agreement is ready for
settlement.
3)Now once the credit memo request (for settlement ) is created , the
Agreement Status (KONA-BOSTA) becomes automatically to 'C'. User cannot
manually change it to 'C' .
4)After that creation of final settlement invoice document , the
Agreement Status (KONA-BOSTA) becomes automatically to 'D'.User cannot
manually change it to 'D'.
It can be viewed as
1) Agreement created   > Agreement Status     Open
2)User can manually change to 'B'   > Agreement Status     'B'
3)Creation of CREDIT MEMO REQUEST    > System automatically changes the
Agreement Status     'C'.
4)Creation of Final Settlement Invoice    > System automatically changes
Agreement Status     'D'.
User can only put 'A' or 'B' manually.
'A' is just for check of settlemnt before release.
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points.

How do i find out the status of the ink in the HP 5510 machine?

Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

Hi,
Please use this:
From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
levels.
Regards,
Note: The ink icon is similar to a drp\op of water.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

RE: Mail notification on changing the status of the spport desk messages

Hi,
I am facing problem with the automatic mail notification in service desk configuration.
When i create a support desk message in the satellite system, the message appears in crn_dno_monitor in solution manager. When i change the status of the message from new to in process, i get a mail only with the subject line "MESSAGE IN PROCESS STATUS' and the pdf attachement (sapscript) is missing. I have checked all the configurations in SPPFCADM but i am not able to figure out the problem. Please help me out of this problem.
Regards,
Sowmya

Hi,
there is a SAP Note with a tutor for send_mail via action. See Note 691303 and the attached .zip-file.
It shows step by step how to set it up and is a very good tutorial. You'll need additional (free) software to let it run.
Regards,
Dirk
@Sowmya: what content does the mail have? None? There is a possibility in SolMan where you can choose whether you want the content as a .PDF-Attachment (which, in my eyes, isn't that sparkling) or as regular mail text.
It is located in TA SCOT. Double klick on "SMTP", then klick on "Internet" and there choose in the Drop Down Menu of Sapscript. When you have trouble, look at my [screenshot|http://home.arcor.de/dirk.malas/solman/Mail_TXT_PDF.JPG].

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

Hi
While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
Has anyone seen this error before, and does anyone know what the fix is?
Thanks,

Just giving my view on this.
When you try to restore a Version backup file, you get this error.
This is a known defect. The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
this is a known bug
but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
Thanks,
~KKT~

Workflwow query to know the status of the PO, Action, performed by

can any one help me to get the workflow query to know the status of the PO, Action, performed by. or the table which can show the Action, Performed by.
please help me with action history table
Edited by: user11309801 on Jun 20, 2010 1:13 AM

Not sure what workflow has to do with PO action history, but pl see if MOS Doc 394787.1 (How to Tell What had been Changed and Who had Made the Changes to a Purchase Order?) can help.
HTH
Srini

How to change the status of the system programmatically with Function Module

I Was trying to change the status of the notification through STATUS_CHANGE_INTERN function module . But It is not changing the status of the notification.
Can any one help to understand what is going wrong ... or any other function module to change status of Customer complaint notification ..

Hi KK,
Please can you take clues form the below discussion thread -
http://scn.sap.com/thread/775169
Thanks to all original contributors of this thread!!
NOTE: Please note that the main point explain here is that, if you are willing to change to a status Ex, NOPR, NOCO, etc then you will need to pass on the value 'I0070', 'I0072', etc. I will also go ahead and like to add one more point here to make the language check as well like "EN", 'DE', etc as these statuses are language dependent too.
Thanks,
Arijit

To find the Status of the equipment

Hi all,
       I need to get the status of the equipment that we get it from EQUI table. I found the FM ITO3_EQUIPMENT_READ_STATUS to find the status. But I don't know what are the tables that I need to give in that.
     Can you please explain me how to use this Function Module ? or any other FM to get the status, if we provide the equipment number ?
Thank you all in advance.
Regarda,
VK.

Hi,
Use BAPI_EQUI_GETSTATUS instead. below is an example.
Data:
v_l_equnr type EQUNR,
it_sys_status type standard table of BAPI_ITOB_STATUS,
it_user_status type standard table of BAPI_ITOB_STATUS.
CALL FUNCTION 'BAPI_EQUI_GETSTATUS'
          EXPORTING
            equipment           = v_l_equnr
          TABLES
            system_status       = it_sys_status
            user_status         = it_user_status
it_sys_status will give you all the system statuses and
it_user_status will give you the user statuses
for specified equipment.
regards
Gaurav

Where can I find the status of the u0093User Compareu0094 for all roles?

Hi Gurus,
After we do a User Compare some of the roles are still in yellow .
I would like to produce a complete list of all roles left uncompared so that I can work on them one by one. But I cant find the relevant table.
Where can I find the status of the User Compare for all roles?
Thanks in advance.

Igor,
There are several reasons to have "yellow" ID's after running a comparison. Often they are caused by time stamp issues. As far as I know there is no table that has a complete list of roles that has not been compared.
I would analyze what roles/user combos are having the issue then look at the underlying tables surrounding them.
If you want to see the tables PFCG_TIME_DEPENDENCY uses you can analyze the program or run an ST01 SQL trace and view the tables the program is using via SQL statements.
Cheers,
Ben

Auto Approval EBP Purchase Order is not updating the status at the header

Hi There ,
We are facing an issue in EBP auto approval PO ,
The process level schema is set to Auto Approval (Standard 9CBUS2201_EX01_55)
During the PO creation , the standard schema is triggered and it gets approved .
The status of the PO in the Approval Tab is showing as Approved .
But in the docuemnt level the status is still Awaiting Approval .
While checking in SWI1 we came to know that an error has happened in the Task TS40007972
and the Guid ID of SRM Purchase is initial that has made the status(EV_STATUS) as initial .
The ERROR is from the below class & method.
Class: /SAPSRM/CL_WF_PROCESS_MGR_SBWF
Method:GET_PROCESS_DECISION_STATUS
Can anyone suggest to overcome this issue .It will be very usefull if anyone could suggest debugging possibility if any .
Regards,
Arun.

Have you tried notes?
1625513 - Workflow without approval is Awaiting approval status
1724251 - Workflow log error: CREATE_DECISION_SETS cannot be executed

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. Is there any way to follow up on where the nano could be? I sent it via FedEx.

I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?

I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who!

Checking the status of the insert query in JSP

frendz,
i am working with JSP .i have some content to be inserted in the database.i have used the insert query in SQL for that.i am able to check whether it has been inserted properly in the SQL but i want to check the status of the insert query with its return value(so that i can confirm it does not return a error).so please help.

The Statement#executeUpdate() returns an int with the row count. Get hold of it.
Also see the Statement API: http://java.sun.com/javase/6/docs/api/java/sql/Statement.html
Apart from this, I recommend you to use PreparedStatement instead. It will not only ease setting Java objects in a query (no hassle anymore with quotes), but it will also prevent you from SQL injections.
Prepare here: http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html
SQL injections: http://en.wikipedia.org/wiki/SQL_injection

What is the status of the Moto X Android 4.4.4 update?

Similar Messages

Maybe you are looking for