What is this syntax: PERFORM Calculate_Production USING fs index.
Hi all,
I did not understand the <fs>. What is this <>.
For what purpose is this used?
Thanks in advance.
Deniz.
<fs> is a field symbol.
Here are some more details about the same -
FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
Extras:
1. ... typing
2. ... STRUCTURE struc DEFAULT dobj
Effect
The FIELD-SYMBOLS statement declares a field symbol <fs>. The naming conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
ashish
Similar Messages
-
Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
What's This Help crashing when using RoboHelp's HtmlHelp API
I followed all the instructions described in the RoboHelp
developer help file. The correct initialisation at the InitInstance
of the application
is called using the CSHInitialize(szHelpPath, TRUE). Then, I
registered the dialog for the "What's This?" help, using the
SHRegisterDialog(...) API. When I right click the mouse on any
control in the dialog I always end up with a crash reporting the
following error:
"The exception unknown software exception (0x0000005) occurred
in the application at location 0x4b78d471".
When we debugged the problem we got the following message in
the debugger which indicates that the crash is happining in the
hhctrl.ocx library:
"Unhandled exception at 0x4b78d471 (hhctrl.ocx) in hoblinkl.exe;
0x0000005: Access violation reading location 0x00000000"
In the meantime another image illustrates the call stack
right before the crash (message not included).
Note that for this application, we have the resouces loaded
from a resource DLL. However, we were told that the help file was
generated using these resource DLLs. We used this dialog as a
testing platform because it is one of the simplest dialogs without
the complexities of property pages etc., which do load certain
dialog resources dynamically.
However, to further test the problem, we implemented the
context sensitive help on a more complex dialog using the standard
HtmlHelp Api, where we are passing an array containing the mappings
between the IDs and the Help topics (for now the mapping is fixed
to one topic ID for simplicity) and I managed to make the context
sensitive help work (not through the What's this menu but rather
through the '?' button at the top right corner of the dialog.) The
proper context help topic is displayed according to the mapped ID.
Has anybody faced this problem and is there a solution for
it? ;Unfortunately the update did not help. Using the field-level
help in the dialog always ends up with a crash reporting the above
error.
The report generated from Microsoft's Windows XP is as
follows:
<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="HOBLinkL.exe"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="HOBLinkL.exe" SIZE="466944"
CHECKSUM="0xE180B629" BIN_FILE_VERSION="5.3.0.1"
BIN_PRODUCT_VERSION="5.3.0.1" PRODUCT_VERSION="TE Version 5.3"
FILE_DESCRIPTION="HOBLink Launcher" COMPANY_NAME="HOB GmbH
& Co KG" PRODUCT_NAME="HOBLink Terminal Edition"
FILE_VERSION="5, 3, 0, 1" ORIGINAL_FILENAME="HOBLinkL.exe"
INTERNAL_NAME="HOBLinkL" LEGAL_COPYRIGHT="Copyright © 2006,
2007 - HOB GmbH & Co. KG. All rights reserved."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x5124E"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="5.3.0.1"
UPTO_BIN_PRODUCT_VERSION="5.3.0.1" LINK_DATE="01/29/2007 07:23:50"
UPTO_LINK_DATE="01/29/2007 07:23:50" VER_LANGUAGE="English (United
States) [0x409]" />
</EXE>
<EXE NAME="hhctrl.ocx"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="hhctrl.ocx" SIZE="546304"
CHECKSUM="0x38577544" BIN_FILE_VERSION="5.2.3790.2453"
BIN_PRODUCT_VERSION="5.2.3790.2453" PRODUCT_VERSION="5.2.3790.2453"
FILE_DESCRIPTION="Microsoft® HTML Help Control"
COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="HTML Help"
FILE_VERSION="5.2.3790.2453 (srv03_sp1_gdr.050525-1542)"
ORIGINAL_FILENAME="HHCtrl.ocx" INTERNAL_NAME="HHCtrl 1.41"
LEGAL_COPYRIGHT="© Microsoft Corporation. All rights
reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0"
VERFILEOS="0x40004" VERFILETYPE="0x1" MODULE_TYPE="WIN32"
PE_CHECKSUM="0x8B1D0" LINKER_VERSION="0x50002"
UPTO_BIN_FILE_VERSION="5.2.3790.2453"
UPTO_BIN_PRODUCT_VERSION="5.2.3790.2453" LINK_DATE="05/27/2005
02:04:27" UPTO_LINK_DATE="05/27/2005 02:04:27"
VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
<EXE NAME="kernel32.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="983552"
CHECKSUM="0x4CE79457" BIN_FILE_VERSION="5.1.2600.2180"
BIN_PRODUCT_VERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180"
FILE_DESCRIPTION="Windows NT BASE API Client DLL"
COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft®
Windows® Operating System" FILE_VERSION="5.1.2600.2180
(xpsp_sp2_rtm.040803-2158)" ORIGINAL_FILENAME="kernel32"
INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft
Corporation. All rights reserved." VERFILEDATEHI="0x0"
VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2"
MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001"
UPTO_BIN_FILE_VERSION="5.1.2600.2180"
UPTO_BIN_PRODUCT_VERSION="5.1.2600.2180" LINK_DATE="08/04/2004
07:56:36" UPTO_LINK_DATE="08/04/2004 07:56:36"
VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>
Any other ideas how to solve this problem? -
What is this syntax error?
The standard SAP program SAPDBZDF giving error in ECC6.0 version in line 211:Field "%_GET" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement . . .
The line declared is
IF B0SG-XASGL <> 'X' AND %_GET+10(1) <> ' '.
What is the %_GET? how to eliminate the error?
This code doesn't give syntax error in 4.0B version.
If it is standard SAP report, please help me.Hi,
this rather looks like some kind of inactive query, infostructure or other generated stuff.
As already mentioned: Our system knows
SAPDBDDF Logical Database SAPDBDDF
SAPDBIDF Real Estate Logical Database
SAPDBKDF Logical Database SAPDBKDF
SAPDBMDF FM Master Data Mass Selection
SAPDBSDF SAPDBSDF Logical Database
SAPDBVDF
If you copied one of the standard logical databases to customer name space SAPDBZDF: I did this and I found OSS notes guiding through additional necessary process.
Regards,
Clemens -
VPN. What's this and how to use it?
Hello,
Recently I started to work from home and not the office. To connect to my work server my company's sysadmin sent me the requisites to connect to VPN (I need to ssh to my work server but it's allowed to the limited set of IPs). But I have no idea what to do next. How to set up the connection and how to use it?
ThanksThanks! I've tried to follow the steps described in the wiki article but unfortunately stucked on 'Making Your Connection' section:
# pon tunnel debug dump logfd 2 nodetach
pppd options in effect:
debug # (from command line)
nodetach # (from command line)
logfd 2 # (from command line)
dump # (from command line)
noauth # (from /etc/ppp/options.pptp)
refuse-pap # (from /etc/ppp/options.pptp)
refuse-chap # (from /etc/ppp/options.pptp)
refuse-mschap # (from /etc/ppp/options.pptp)
refuse-eap # (from /etc/ppp/options.pptp)
name pshevtsov # (from /etc/ppp/peers/tunnel)
remotename PPTP # (from /etc/ppp/peers/tunnel)
# (from /etc/ppp/options.pptp)
pty pptp xx.xx.xx.xx --nolaunchpppd # (from /etc/ppp/peers/tunnel)
crtscts # (from /etc/ppp/options)
# (from /etc/ppp/options)
asyncmap 0 # (from /etc/ppp/options)
lcp-echo-failure 4 # (from /etc/ppp/options)
lcp-echo-interval 30 # (from /etc/ppp/options)
hide-password # (from /etc/ppp/options)
ipparam tunnel # (from /etc/ppp/peers/tunnel)
proxyarp # (from /etc/ppp/options)
nobsdcomp # (from /etc/ppp/options.pptp)
nodeflate # (from /etc/ppp/options.pptp)
require-mppe-128 # (from /etc/ppp/peers/tunnel)
noipx # (from /etc/ppp/options)
using channel 28
Using interface ppp0
Connect: ppp0 <--> /dev/pts/3
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3541a215> <pcomp> <accomp>]
Script pptp xx.xx.xx.xx --nolaunchpppd finished (pid 26089), status = 0x0
Modem hangup
Connection terminated.
I don't know what to do -
Receiving the problem report "This syntax cannot be used for an object name"
Hello dear ABAPers,
after falling in love with Eclipse and not using it for a while now, I receive the following problem report evey time I try to change a local class in my function pool:
since there are no details for this report and I can change all objects concerning my project except of the local classes defined in my function pool, I hope to find some help in the community.
best regards
PhilippHi Michael,
the name of my function pool isn´t /FIS/OSS_TD_FUGRL_LCL but /FIS/OSS_TD_FUGR.
I created it by forward navigating from the default includes given and renaming it afterwards to clarify the name. (I think, that was a bad idea)
The problem is kinda solved now, because I deleted the Include and replaced it with an Include created by forward navigation without renaming it.
Still thanks for your support.
So long
Philipp -
hi This event is logged in SharePoint 2010 logs often please help trace the issue also it precedes with Project server WCF code execution which alos is quite slow in execution, means PWA site runing slow. why does status read
provisioning while i am not running anything.
please help!!!
10/03/2011 14:39:23.46 w3wp.exe (0x306C)
0x2FC4
SharePoint Foundation Topology
e5mc Medium
WcfSendRequest: RemoteAddress: 'http://moss:32843/a667a0a96d314e5e9e6c8fe4866c5db4/PSI/PWA.svc' Channel: 'Microsoft.Office.Project.Server.Interfaces.IPWA' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/AdminReadSiteMapTyped'
MessageId: 'urn:uuid:0751dbdd-76c0-4410-ac73-2f1782e1513b'
91b87b3b-e9ad-43b9-9e8c-e553ba7e2f6c
10/03/2011 14:39:23.46 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://moss.ccl.local:32843/a247f7273c09486999c9f111798cab59/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
MessageId: 'urn:uuid:772a5c58-c0e4-4b0f-9142-f634fee413a9'
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.46 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation)
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.64 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=179.589584709789
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.64 w3wp.exe (0x306C)
0x3170
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=205.109867315539
10/03/2011 14:39:23.64 w3wp.exe (0x306C)
0x3170
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=206.500546857212
10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
0x0FA8 Project Server
Provisioning
8zdn Medium
[SERVICE] ProjectQueueService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
0x0FA8 Project Server
Provisioning
128v Medium
[SERVICE] ProjectQueueService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
0x0FA4 Project Server
Provisioning
8zdn Medium
[SERVICE] ProjectEventService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
0x0FA4 Project Server
Provisioning
128v Medium
[SERVICE] ProjectEventService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
Sandboxed Code Service
ei0p Monitorable
- Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
Sandboxed Code Service
ei0p Monitorable
- Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.Hi there,
A quick search showed the result on fourm thread:
It's related to SHarePoint foundation error & this issue occurs when the account under which SPUserCodeService is configured to run does not have the necessary permissions to access the performance counters on the server.
http://social.technet.microsoft.com/Forums/eu/sharepoint2010setup/thread/9fbcf2a3-1b1f-4fd8-a9b4-dc63ed753973
To read in support article.
http://support.microsoft.com/kb/983081Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82 -
Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and restore my backed up files. Since I use time machine, can I assume that all my files and programs can be restored from my recent back ups?
Hi jeromefrodia,
Welcome to the Apple Support Community!
I understand that you are concerned about your data before reformatting the disk. Because you use Time Machine your information should be safe. Please refer to the attached article for information about what Time Machine backs up and how to restore from that backup.
Mac Basics: Time Machine backs up your Mac
Cheers,
Joe -
What program besides Mail.app might use "envelope index"?
I routinely copy my Mail data between my two computers I use in different cities, copying any changes in Users ▸ [me] ▸ Library ▸ Mail from one to the other via a portable hard drive.
This method worked great up through Mt Lion but has hit a snag in Yosemite (possibly would have same problem in Mavericks but I skipped that OS.)
Now when I try to copy files I'm informed that all three Envelope Index files are in use. I don't have Mail running and don't run mail until the files are transferred.
I'm guessing something like notification center or other such program is accessing the files but turning off Mail in notification center didn't release the files.
Any ideas of how to "release" these files would be of help.Linc Davis wrote:
I'm surprised it ever worked at all.
Well, since its been working for two years I must be doing something right.
A quick search found many articles on moving mail to another Mac. Chris Breen advised that it could be done in this article. He suggests this method as a one time fix for a problem but there's no reason I can't do it twice a week.
Mail does not sync directly between clients.
I don't understand your point. However this IS how I sync my mail client data. I keep duplicates on both machines. Using a program that copies any modifications to the folder back and forth, the clients are quite happy to work with the data I put in there for it.
The messages should be stored on IMAP or Exchange servers, and that way will be available to all clients at all times. If you have a POP account, look into migrating it.
I use multiple IMAP accounts. Problem is my email archives (my Mail folder in my user library folder) is over 6GB. I don't want to store all that data on an IMAP server. I don't know if I really can. Sure, I need to do some house cleaning but for now I simply would like to know....
Does another program access the Envelope Index files in the User>Library>Mail>V2>Maildata folder?
Randy -
What does "this ipod cannot be used because the Apple Mobile Device has not been started? I am trying to sync to itunes and the ipod is turned on????
http://support.apple.com/kb/ts1567
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Tried to use the spot healing brush and clone stamp and got error messages "cannot use because the scratch disks are full." What does this mean? PSE9
Elements uses drive space to make its calculations, like someone writing down measurements on a scrap of paper. How much free space is there on your hard drive?
-
What's This? tool in RH 8
I am researching new ways of presenting context sensitive help, instead of opening a topic from the full help. Cannot find info about What's this?
I want to know what the output looks like. Is it in a 'bubble', does it appear when you hover over a field in the product, or must you click a link?
Has anyone had success using this tool?Hi Sue
If you want to see "What's this" help in actual use, hopefully you have Windows XP. I don't think I've seen any What's this since migrating to Windows 7. Not sure about Vista. Anyhoo, if you have XP, just open Microsoft Paint. (Click Start > Run > Type MSPAINT into the Run dialog and press Enter).
From paint, click File > Save As and you should see a dialog similar to below. See the Question Mark in the upper right coner? Click it and the cursor changes.
Click the item you want information on and if it's available, a description will be presented.
Hopefully this helps with providing what you were looking for.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks -
an error...Exc in ev hand! oSAPlg.o.Root.log not a function....what is this
While I am using the firefox site this error is coming up.
What is it...I have never seen it before.
Regards, Michael 0423 053 251Upgrade your browser to Firefox 9 and check
* getfirefox.com -
Use of Indexes in select query
Hello,
This is on a 9i install.
There is an index called form_id_idx on the form_id column.
Why does this query use the index (autotrace indicates range scan on the index):
select count(*) from table_name where form_id=123456;
but this query does NOT use the index (autotrace indicates full table scan):
select accepted from table_name where form_id=123456;
This second query runs much faster when I use a hint on the index. Any help/suggestions?
Thanks.The first query does NOT have to go to the Table it all. It can read the index to count the number of rows for "form_id=123456". An Index Range Scan would be fast.
The second query has to go to the table to get the values for the "accepted" column for all the rows that have "form_id=123456". Remember that every get can require a read of 2 or more blocks -- at least one, probably 2 or 3, from the index and 1 from the table. If the number of rows is likely to be large then the number of block get operations would be high. In such cases, Oracle computes that it is faster to do a small set of multiblock reads to read the whole table (Table FullScan).
Therefore, the optimzer weighs :
a. how many rows it thinks will satisfy "form_id=123456"
b. how many index + table block gets it would have to execute (all as single block read calls to the OS)
versus
x. how many multiblock read calls it thinks it has to execute to read the whole table
If the available statistics on number of rows, cardinality or density and the size of the table indicate that operation "x" would be cheaper then operations "a" + "b", Oracle would prefer the latter.
Hemant K Chitale
http://hemantoracledba.blogspot.com -
I received this error message: The system extension "/System/Library/Extensions/ACard6280ATA.kext" was installed improperly and cannot be used. Please try reinstalling ... . What is this about? What is ACard6280ATA.kext?
I'm still with you, just having a hard time wrapping my mind around the fact that you reinstalled OS X, which is like shooting a mosquito with a cruise missile, yet the problem remains.
Here is the KB article for your review: Reinstalling Mac OS X
Admittedly there is not much to it, but it should have eradicated the problem.
I would guess that the 17 "hp_" messages have something to do with Hewlett-Packard and in fact I do use an HP printer with the computer. I uninstalled the printer software and reinstalled it. The printer seems to work fine, but the kernel extension error messages still keep appearing. I'm inclined just to delete these 17 kernel extensions and then, if the printer doesn't work correctly, unintall and reinstall the printer software again. Sound sensible?
It certainly does. The only thing I can think of is that the OS reinstallation did not recognize those kernel extensions and left them untouched, AND the HP uninstaller did not remove them, AND the HP installer did not perform correctly. Having suffered through several HP botched software attempts I tend to believe that remains a posssibility.
If you are so inclined, I would remove the troublesome .kext files as you say, then reboot. Be prepared for the printer to stop working, but once you remove them try the printer again anyway. The vast majority of printers do not require any specific downloads since their drivers are already built into OS X.
As a last resort try reinstalling OS X again (I know...) and run Software Update to bring everything up to date. Apple released some new printer drivers a few weeks ago.
Finally, if this doesn't work post the same question as a new topic since I am out of ideas. A new topic will get more attention than unresolved questions with responses.
Maybe you are looking for
-
ORA-01720 while trying to grant select on a view
Hi Friends, Iam getting the following error while trying to grant select privilege for the view to SchemaB, i have the view in schemaA. I have used the tables from both the schema for creating the view and iam getting the error on showing a particula
-
Transfer customer specific Roles assigned to a customer from R/3 to CRM
Hello dear all, on R/3 side there are customer specific roles defined and assigned to customers. These roles are sales area depending. On CRM side we plant to uses the Employee Responsible relationship to build up these customer specific roles. To di
-
Deactivate all Services in sicf
Hello friends Is there a possibility to deactivate in transaction sicf all services (including all subtrees)? In our system unfortunately all services are active. We want to deactivate them all. When I deactivate a supertree the subtrees are implicit
-
Loose dock connector in 2nd gen iPod touch
My iPod touch (2nd gen) won't charge because the dock connector is loose. I have two connector plugs, both work fine with my iPod nano. But neither works with my iPod touch. The connection feels loose. When I examined the connector in the iPod touch
-
Since security update, all documents have disappeared.