What is unicode Checks in Upgradation Project
Hi Folks,
Can any one tell me ..
What is Unicode Checks in Uopgradation Project..
What it is Uded for?
Y it is need in Upgradation Project?
Hi Surendra,
Refer to the below related threads:
what is unicode
unicode
unicode
unicode
Hope this will help.
Regards,
Nitin.
Similar Messages
-
What is unicode check in sap?
what is unicode check in sap?
Hi
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c55458b3dc11d5993800508b6b8b11/content.htm
Check for the following errors
object must be a character type data object
In Unicode, the addition IN BYTE/CHARACTER MODE must be specified
The access and storage modes ACCESS and MODE must be specified
var1 and var2 are not mutually convertible. In Unicode programs must have the same type/structure
TRANSLATE CODE PAGE/NUMBER FORMAT not allowed
The data type/structure objetcs in 'ADD' statement should have same type
The data type/structure "&1" and "&2" are should have same type
IN TEXT MODE the addition ENCODING must be specified
Structures "&1" and "&2" are not mutually convertible.
The ENCODING addition is not valid in BINARY mode
The IGNORING CONVERSION ERRORS addition is not valid in BINARY mode
The REPLACEMENT CHARACTER addition is not valid in BINARY mode
Check for the Customer code pages and use the tcodes SCOV and SPUMG .
Please Go through these Documents,
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a -
Hi All,
I need your expert opinion on this.
We are planning to upgrade from 6.20 to ECC 6.
My requirement is to before going for upgrade to ECC 6.i need to check all CUSTOM programs for UNICODE compatiablity in 6.20. If any errors found i need to correct it in 6.20 itself and then go for ECC 6 upgrade.
I like to know whether this will be a right move to check all custom programs before going upgrade to ECC 6.?
Thanks
aRsHI..
Since you are upgrading from 6.20 to ECC
i think its better to check at this time..
Because from 4.7 ..all versions are Unicode Compatible..
Unicode compatibilty can be checked using Tcode UCCHECK
Thanx . -
Info regarding upgrade project
Hi Experts,
am going to join to do upgrade project (ECC6.0) till now i ve worked on up to 4.7 only, so what is required knowledge for upgrade project.
and what is unicode is it required for this?
Thanks in advance.
sudha.Hi,
ECC 6.0 does not support MDMP installations. For those systems, a Unicode
conversion needs to be done before the upgrade to ECC 6.0. A combined Unicode
conversion / release upgrade is another possibility. In such a project, the system is
upgraded to ECC 6.0 and migrated to Unicode in one step.
All this does not apply to your environment. Non-Unicode, single code pages systems
are still supported in ECC 6.0. You have to option to an upgrade to ECC 6.0 and migrate
to Unicode at a later stage. If you want, you can also do a combined Unicode
conversion / release upgrade project which does both in one step.
I cannot predict the expected downtime as it depends on many different factors such as
the database size, size of the biggest table, number of CPUs and amount of memory in your system.
OR Check these links....
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1242699,00.html
http://www.saptechies.com/upgrade-from-sap-47-x110-to-ecc6/
for upgradation project guide.....
http://www.sappressbooks.com/product.cfm?account=&product=H2903
Reward points if useful....
Regards
AK -
hi friends..
can u tell me..
what is unicode check ? in which cases we use this?
what is enhancement category ? in which cases we use this?Hi,
UNICODE:
http://www.sap-press.de/download/dateien/1240/sappress_unicode_in_sap_systems.pdf
ENCHANCEMENT:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Reward if useful! -
Hi All,
I want to know about "Unicode Check Active" in ABAP Editor Program Attributes.I don't know anything about this.I want to know
What is Unicode Check Active.
How to Activate this Check Box.
what is meant by Code Pages.
What is UTF-8 UTF-16 & UTF-32.
What is the Use of It.
In ABAP Code the Unicode Check Doesn't Support the some syntax like Open Data set and Describe Lines like that what are all the syntax in ABAP it doesn't support.
Can anybody give me the clear idea about this.So, it will be very helpful to me.This is very urgent.Surely i will reward more points.
Thanks,
Swapna.Hi,
Unicode Check is one of the latest enhancement in SAP which has been done so as to provide SAP product in almost all the language that is spoken in the world.
A program as to be made Unicode check Active in its attribute so that it can be used in Unicode enabled SAP system.
what is unicode?
From Release 6.10, ABAP supports multi-byte coding for characters in Unicode. Prior to Release 6.10, ABAP used only character sets that were based on single-byte codes such as ASCII and EBCDIC or double-byte codes, such as SJIS and BIG5.
what is unicode enabled program?
A Unicode-enabled ABAP program is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system as in a Unicode system .In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
Type of errors in unocode check.
This switch to Unicode affects all statements where an explicit or implicit assumption is made about the internal length of a character. If you use these statements in a program that is designed to exploit the Unicode capabilities of the runtime environment, they must be checked and changed if necessary. Once a Unicode-enabled program has been changed accordingly, it behaves in the same way in both Unicode and non-Unicode systems. You can develop programs in a non-Unicode system (NUS) and then import them into a Unicode system
UNICODE CHECK ACTIVE:
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
Call transaction SAMT
Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
What do you mean by changing a Function Group in upgradation projects
Hi ABAPers,
I am new to upgradation project will any one help me in understanding the concepts like.
1) what do you mean by changing a Function Group in upgradation projects
2) what is the relation b/w the Maintenance view and function group
3) what happens when we regenerate the table maintenance in se11
4) how can i restore the changes that have done to FG after regenerating
5) Suggest me is there any Tcode or procedure to see the code in Remote system (like how we compare the versions of remote system)
Could you please help me ..
Any relevant docs you can send it to [email protected]
Thanks in advance..Hello Smriti,
Exploding a BOM means to display all the components and sub-components for a BOM in a particular transaction (eg) VA01,CO01,ME22N etc..
You can use the SAP FM's depend on the Functionality:
CS_BOM_EXPLOSION General BOM explosion
CS_BOM_EXPLOSION_EQUI BOM explosion - initial screen: equipment
CS_BOM_EXPLOSION_MAT BOM explosion (old version); as of 3.0, use CS_BOM_EXPL_MAT_V2
CS_BOM_EXPL_EQU_V2 BOM explosion for equipment
CS_BOM_EXPL_KND_V1 BOM explosion for material
CS_BOM_EXPL_MAT_V2 BOM explosion for material
CS_BOM_EXPL_PSP_V1
CS_BOM_EXPL_TPL_V1 BOM explosion for functional location
CSS7 Explode BOM (Document)
CS_BOM_EXPL_DOC_V1 BOM explosion: document sub-assemblies
CS_BOM_EXPL_GNRL2_V1 General BOM explosion: document sub-assemblies
CSSO
CS_SO_MODE_BOM_EXPLOSION
As per Garet in response to your question better talk to the Functional team to get the better underatanding for your requirement.
Check the below link for more details on BOM:
http://sap-img.com/sap-sd/what-is-bom-referring-to-sap-sd.htm
Thanks,
Greetson -
What is the role of an abaper in upgradation project from 4.7 to ecc6.0?
Hi anybody pls forward any documentation and ppts to understand the upgradation project
What is the role of an abaper in upgradation project from 4.7 to ecc6.0?
what we have to check and we have to upgrade give some guidance
thanks in advance.Hi,
check the below link..
http://www.thespot4sap.com/upgrade_guide_v2.pdf
reward if helpfu.
Regards,
Nagaraj -
What is an Upgrade project mean
<Moderator Message: Besides you say you searched, I cannot believe that it is true. This question has been asked already a lot of times. May be you need to adjust your search terms>
Hello All
I tried to search for the relevant procedure or doc,,but I couldnt able to find the correct one,hence am posting this question.
What is an Upgrade project mean?
As we are going to upgrade from 3.5 to 7 version,,But I dont know anyhting of this upgrade and how to do also.Is there any fixed process for doing this.
Can anyone tell me what are the procedures involved in the Upgrade and what type of work will they expect from us technically as a BW consultant.
Thanks
Shankar
Edited by: Siegfried Szameitat on Feb 19, 2009 10:42 AMHi,
Search for 'Upgrade Project' or 'Roles of Consultant during upgrade'.
check this out:
Activities:
https://forums.sdn.sap.com/click.jspa?searchID=22518474&messageID=6953087
https://forums.sdn.sap.com/click.jspa?searchID=22518474&messageID=6729155 this one could be lucky that I wasn't in there because the links provided are not allowed.
Roles:
https://forums.sdn.sap.com/click.jspa?searchID=22518710&messageID=6622978
Siggi -
Going live check for SAP upgrade projects
Hello,
I am interested in "going live check" service and procedures for my upgrade projects. May I find any documentation? Do I have to pay for it?..
Thanking you in advance and a happy new years!
Kind regards
Nilüfer ÇalışkanHi Nilufer,
The following Input as follows :
Source : http://www.thespot4sap.com/upgrade_guide_v2.pdf
This service is included as part of your annual maintenance fee.
The underlying concept of the SAP GoingLive Functional Upgrade Check is
to ensure smooth operation of your mySAP.com solution by taking action
proactively, before severe technical problems occur.
The GoingLive Functional Upgrade Check is made up of three sessions
(Planning, Analysis and Verification)two sessions (Planning and Analysis)
before the upgrade and the other (Verification) after the upgrade.
Planning Session: This session should be performed as much in advance as
possible when the upgrade is first being considered.
Analyses compatibility for the target release with regards to connected
systems in the Solution Landscape, OS version, DB version, installed Add-
Ons, Plug-ins, Country Versions, and so on.
Analysis Session: It is generally performed two months before the
production upgrade (consider lead time for hardware procurement).
The focus is on resource planning and system configuration.
There is a high-level hardware plausibility check (this is not a hardware
sizing exercise).
Potential resource bottlenecks are identified.
Necessary changes will be recommended to prepare the system for the
productive use of the new release.
38 SAP Upgrade Guide | Simplifying Your Upgrade
Verification Session: Generally performed four to six weeks after the
production upgrade, and the recommendation from the analysis session
implemented.
Comparison of performance with results prior to upgrade
Recommendations on configuration and optimization
More information and ordering . For more information, see the GoingLive
Functional Upgrade Check web page at:
<b>http://service.sap.com/goinglive-fu</b>
To order a GoingLive Functional Upgrade Check, contact SAP Customer Care
Center at least eight weeks prior to the planned upgrade of your production
system.
For customers of value-added resellers (VARs) such as CBS customers in the
US, special conditions apply. Contact your VAR.
Remote Upgrade Service
Remote Upgrade Service is a technical upgrade that is performed by SAP
remote consultants. Pricing is based on the complexity of the customers
environment.
SAP performs the technical upgrade of your system, allowing you to focus on
the functional and training side of the upgrade. You are still responsible for
resolving object conflicts.
See SAP Notes 106447 and 84044.
The Remote Upgrade Service is an attractive option for CBS sized customers
with small or non-existent mySAP Technology group.
For more information see the Remote Upgrade Service web page at:
http://service.sap.com/remoteupgrade
Resources
The following list shows some of the resources you can use as you prepare for
your upgrade of SAP. These resources include:
Your installation partner
Customers and others you have networked with at customer functions and
conferences such as:
ASUG
Hope this Info helps you.
<i>Advanced New Year wishes.</i>
Br,
Sri
Award points for helpful answers -
What is the process for rollout projects and upgradation projects
Hi All,
Hope you all are doing well.
I am a new bee in oracle apps. Just would like to understand what is the process for rollout projects and upgradation projects and difference between them.
Please help me. Thanks in advance.
Regards,
MMDon't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
Where Technology Meets Talent -
Regarding information on Upgrade Project
Hi Experts,
I would like to know more details about Upgrade Project. What are the technical and functional tasks will be there in the process of Upgrade.
Please help me this because i'll be starting my work in Upgrade Project in another 2 days.
Thanks in advance
TanveerHi,
first of all upgrade is nothing but
Upgrade is nothing but installing a new version of software which have more functionality earlier version.
in Upgrade mainly three types
1.Technical Upgrade
2.Functional Upgrade
3.Strategic upgrade
Technical upgrade : is a fast upgrade without additional functionality but with minor user interface changes, to ensure business continuity. This upgrade type includes a cleanup of the system without implementing additional functionality, as well as technology upgrade with the opportunity to eliminate not used modifications and custom developments.
Functional upgrade : Is built on the technical upgrade, the functional upgrade provides in addition the opportunity to implement new functionalities in area like FI,HR,Logistics ..,this upgrade type also represents an opportunity to maximize the use of SAP standard functionalities by replacing custom modifications and consolidate instance or systems.
Strategic upgrade: Is driven by enterprise SOA to provide more flexibility to business process innovation. This type of upgrade approach represents a significant technology improvements step by leveraging SAP Net weaver functionality to standardize, adapt, and enable new business processes and optimized scenarios.
The major stages of a technical upgrade can be:
System preparation and stack level patch upgrade u2013 Basis Team
SPDD Phase u2013 ABAP and Functionals
Up gradation of the system u2013 Basis Team
SPAU Phase u2013 ABAP and Functionals
DBACOCKPIT for indexing u2013 ABAP TEAM
Unicode check
Issues during upgrade
For Further clarification in this regard, Do let me know.
Hope I have answered your query.
Regards,
Abdur Rafique -
What are the different type of projects
i mean how many different type of projects are there in sap implementation..
what do you mean by,
enhancement project
rollout project
development project
support project
is there any thing else other than this?
please clear my doubt.
points would be rewarded.
thank you.Check the link:
http://help.sap.com/saphelp_sm40/helpdata/en/ba/38c93a37c59122e10000000a114084/content.htm
Implementation Project
Project to implement business processes in an SAP landscape.
Create a project structure from the business processes. You can either create a new project structure, or base it on one of the following:
One or more user or partner templates
An existing project
Scenarios and configuration structures delivered by SAP
An existing production solution landscape
Template Project
A project to create a template.
A template makes your project structure, or parts of it, with its assigned objects (documentation, test cases, IMG activities), available to other projects.
You can lock templates, completely or partially, against changes when they are used in other projects. To use templates in other systems, transport them.
Template projects are especially suited to SAP partner solutions or global rollout.
Upgrade Project
A project to upgrade existing systems.
In an upgrade project you can:
Upgrade customizing: Upgrade existing functions
and/or
Delta customizing: Copy additional functions
Optimization project
A project to optimize the flow of business processes, or the use of a software solution.
You can use optimization projects, for example, in SAP Services.
Safeguarding project
A project to resolve a critical situation in the implementation or use of an SAP solution.
Safeguarding projects show the reasons for a critical situation and coordinate the steps required to resolve the problems.
Maintenance project
A project to maintain a solution
in Change Request Management. The project contains all maintenance activities and urgent corrections of a solution.
in Check-In/Check-Out Business Processes from the Solution Directory
Regards
Edited by: Sravan Prakash.V on Dec 28, 2007 12:25 PM -
What is the difference between upgradation and migration.
Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathiHi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK -
Unicode/ECC6.0 Upgrade Question
We are going to upgrade to ECC 6.0 soon and are working on making the system unicode compliant. Is it manditory to fix all the ws_download and ws_upload functions to gui_upload and gui_download?
Thanks,
David>
David Dockham II wrote:
> We are going to upgrade to ECC 6.0 soon and are working on making the system unicode compliant. Is it manditory to fix all the ws_download and ws_upload functions to gui_upload and gui_download?
>
>
>
> Thanks,
>
> David
Dear David,
Yes, because iff its unicode upgrade project, very first step you have to check is attributes of the program, activate the "unicode check active" checkbox. Next you have to goto "UCCHECK" transaction, there it will throws all errors like unicode errors and Obsolete FMs(ws_download,ws_upload,upload,download,popup_to_confirm_step,,etc). After this if you have any doubts on Obsolete function modules, goto Extended program check for that object, in that, it will shows all Obsolete FMs(it will displayed in 3rd row "call function interface warnings".
Let me know if you have any queries.
Regards
Arani Bhaskar
Maybe you are looking for
-
I just picked up a new remote control for Comcast yesterday. I was able to program the remote for the TV after several trys but the cable is not working. The cable light comes on but nothing else. I am able to adjust the volume but no other buttons w
-
[SOLVED] flashplugin video freezing while audio is fine
I saw a post about this on this forum, but I've been searching the forum for about 5 hours now and I can't find it, so I'll post a new topic. When I do almost anything with adobe flash (in firefox or chromium) after about five seconds the visual free
-
Problem launching BSP application
Hi all, I'm currently working in CRM 5.0 and I'm trying to launch the BSP application (CRM_IC -> default_dh.htm). I was able to succesfully launch it in the web browser. However, I could only see the toolbar buttons in the browser. The Workarea and t
-
BT Broadband with non BT Home Hub
As of yesterday, or maybe even the night before, our broadband (and BT vision) which has been working perfectly for months, no longer works with a Thomson TG585 router. I have a friend with the same setup and they also now have the same problem. Us
-
Designer Entity-Attribute 'Description' storage - where is it?
I'm searching for the Oracle Designer table that holds the Entity-Attribute 'Description' text. I've found the Entity-Attribute 'Notes' in the CI_ATTRIBUTES table but haven't located the 'Dscription'. I'm also having trouble locating the 'Description