What's the code of SetCINArraySize and NumericArrayResize? Thanks

Hello,
I work with LabView and Visula C++. I do CIN and want to know the code of SetCINArraySize because I have a little problem in operation with matrix.
If you have the code of NumericArrayResize too, could you send me please?
Thank you in advance.
Sorry for my English.
[email protected]

Hello,
The function SetCINArraySize, which is found in labview.lib, and which will take care of all the memory management clean up, is not an open source file. The library file "labview.lib" is part of the CIN tools for LabVIEW and cannot be shared with external developers.
Sorry about that.
Matthieu G.
National Instruments

Similar Messages

What's the difference between DAQmxCreateCIFreqChan and DAQmxCreateCIPulseChanFreq

What‘s the difference between DAQmxCreateCIFreqChan and DAQmxCreateCIPulseChanFreq？
Thanks！

iMovie enables you to edit video footage - typically from a video camera - add titles, effects, etc.
iDVD enables you to create an authored DVD of your iMovie, complete with DVD menu, chapters, "extras", etc and can be played in a conventional DVD player.
20" iMac Intel Core Duo 2GHz 1GB RAM Mac OS X (10.4.7)

I bought a used iphone 4 and it is locked. When I try to recover it shows code 1671. What does the code mean?

How do I do factory reset on an iphone 4? I bought it used and it has a password and when I tried to reset the phone it shows error code 1671. What does that code mean? Thanks

Hello tresacg,
Thank you for using Apple Support Communities.
It sounds like the previous owner has enabled a password on it. The first thing you can try is in this article:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Regards,
Jeff D.

What is the code to disable right click and where do I put it in reference to an image?

What is the code to disable right click and where do I put it in reference to an image?

There is no sure way to prevent people from right clicking on your webpage or taking images. This will tell you how:
http://www.dynamicdrive.com/dynamicindex9/noright.htm
Now if I have javascript disabled visiting your site, I can easily get around this because the code will not execute. Also I can simply view the source of your website and get the images. My suggestion to you is to rethink this because all you will end up doing is annoying visitors and make them want to get your images even more. The more you block people from something the more they want it. It's like telling a kid they can't have candy or something then they want it more.

What is the diffrence between PGA and UGA?

Hi All
Just one question
"What is the diffrence between PGA and UGA?"
Thanks

PGA Memory
The Program Global Area (PGA) is a memory region that contains data and control information for a single process (server or background). The PGA is made up of the following:
Stack Space
A PGA always contains a stack space, which is memory allocated to hold a session's variables, arrays, and other information.
Session Information - (UGA)
A PGA in an instance running without the multi-threaded server (named Shared Server in Oracle9i) requires additional memory for the user's session, such as private SQL areas and other information. If the instance is running the multi-threaded server, this extra memory is not in the PGA, but is instead allocated in the SGA (the Shared Pool).
Shared SQL Areas
Shared SQL areas are always in shared memory areas of the SGA (not the PGA), with or without the multi-threaded server.
Non-shared and Writable
The PGA is a non-shared memory area to which a process can write. One PGA is allocated for each server process; the PGA is exclusive to a server process and is read and written only by Oracle code acting on behalf of that process.
UGA Memory
The UGA, or User Global Area, is allocated in the PGA for each session connected to Oracle in a dedicated server environment. The PGA is memory allocated at the client to hold a stack which contains all of the session's variables, etc. In a Shared Server environment, Oracle allocates this memory in the Shapred Pool (the shared pool is contained in the SGA), for all sessions. This helps to reduce the PGA (client) memory footprint of Oracle, but will increase the SGA (shared pool) requirements.

What is the diffrence between OCI and OCCI?

What is the diffrence between OCI and OCCI?

Will Lee wrote:
What is the diffrence between OCI and OCCI?Beside the other answers, there are a few additional points to consider:
1) OCI is the "gold" standard API. New stuff is always available in OCI first, and only later trickles down to other APIs, like OCCI.
2) OCI is a low-level API, harder to get started with, than OCCI. APIs in OCI are often "untyped", taking a void*, which opens the door for errors.
3) In OCCI you set values, while in OCI you bind them. So OCCI takes a copy of your values, while OCI takes an address at which to later read the value. This opens the door to subtle bugs where you pass the address of a temporary in OCI, which later crashes in some mysterious ways. So OCCI is way safer in this regard.
4) OCI is C code, which is very portable. Because OCCI is C++ code, and on Windows you can't easily mix and match libraries compiled with different versions of Visual C++ (VC6, 7, 8, 9), you have to wait for Oracle to make a new build with the latest MS compiler. Just see the number of questions on this OCI forum and the OCCI one.
5) OCI is used internally by Oracle to write many of their own tools, it's the lingua franca between the Core DB group and the other groups. Since they use it themselves, it's much more stable that OCCI, which is mostly only used by outside customers.
6) The way SQL objects are dealt with in OCI and OCCI is fundamentally different, to the point where you can't mix and match OCCI and OCI object calls.
#1 above is one reason we had to abandon using OCCI, lacked support for the new in 11g BinaryXML, but that's just one example.
IMHO OCI is the way to go, if you want the latest and greatest. Yes, it's more difficult to code against, so the learning curve is steeper, but once you've reached critical mass it's just fine. If you write code in C++ as opposed to C, you can easily make it a lot safer with a thin C++ layer on top which, unlike OCCI, still allows you access any OCI raw handle to do stuff the wrappers don't expose. My $0.02 ;-) --DD

What is the difference between ActionEvent and SelectionEvent?

Technical Environment:
Oracle jDeveloper 11.1.1.4.0
Windows XP
I think there is something behind ActionEvent and SelectionEvent that makes my code doesn't work.
Here is my problem:
I have three tables. One is a master table, contains summary of something. If I select a row on this table, the second table will show some data, based on the selected row on the first table. Yup, this is a ViewLink, and it is working perfectly. Now, I want the same thing works between the second and third table. If I select a row in second table, the third table should show some data, based on the selected row on the second table. The third table is a ViewObject with some bind parameters. I need to assign values to these parameters, which I get the value from the selected row on the second table. How can I do this?
I have tried to use ExecuteWithParams. Select the row from second table, get the values, pass it into ExecuteWithParams Form, execute and.. it works.. I get the result on the third table. Here is the code how I do that:
public void updateTableEvent(ActionEvent actionEvent) {
DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
Row rw = iter.getCurrentRow();
oracle.jbo.domain.Date strDate = (oracle.jbo.domain.Date) rw.getAttribute("Tgl");
String strRkno = (String) rw.getAttribute("Rkno");
oracle.jbo.domain.Number strRkId = (oracle.jbo.domain.Number) rw.getAttribute("Rkid");
DCIteratorBinding iterParam = gen.getIteratorBinding("variables");
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkId", strRkId);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pTgl", strDate);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkNo", strRkno);
OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
Object result = operationBinding.execute();
But when I tried the same thing on SelectionEvent, I got nothing.. no error and also no result. What I want is just select the row on the second table, and get the result on the third table, with no any button pressing. Here is the code:
public void onRowSelect(SelectionEvent selectionEvent) {
DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
Row rw = iter.getCurrentRow();
oracle.jbo.domain.Date strDate = (oracle.jbo.domain.Date) rw.getAttribute("Tgl");
String strRkno = (String) rw.getAttribute("Rkno");
oracle.jbo.domain.Number strRkId = (oracle.jbo.domain.Number) rw.getAttribute("Rkid");
DCIteratorBinding iterParam = gen.getIteratorBinding("variables");
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkId", strRkId);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pTgl", strDate);
iterParam.getBindingContainer().getVariableManager().setVariableValue("ExecuteWithParams_pRkNo", strRkno);
OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
Object result = operationBinding.execute();
So.. what is actually happening here? What is the differece between ActionEvent and SelectionEvent? Why do they give me difference response?
Thanks for any comments.
Regards,
Novan Ananda

Hi,
ActionEvent :
A semantic event which indicates that a component-defined action occured. This high-level event is generated by a component (such as a commandbutton,commandLink) when the component-specific action occurs (such as being pressed).
SelectionEvent :
Event that is generated when the selection of a component changes.
//you can also search in api's

What is the difference between start() and run()

Hi:
what is the difference between start() and the run()???
in my app, i have
Console.debug( "starting thread to listen for clients" );
_server = new Server( this );
_server.start();
_server extends Thread..
why everytime i use server.start(); my app will terminate on it is own, even though in my servr.run() method, i have a while loop
and if i call _server.run() explicitly in my code, that while loop will be in execution
can someone let me know??
thnx

what is the difference between start() and the
run()???start() is a method on Thread that tells it to start.
run() is a method in the object that the thread executes.
why everytime i use _server.start(); my app will
terminate on it is own, Err.... I'm not convinced this is true. It'll throw an IllegalThreadStateException, if you try to restart an existing thread.
If that's what you're saying.
even though in my _servr.run()
method, i have a while loopI don't see the connection. Are you saying that the while loop never terminates, and you don't see why the thread is terminating?
and if i call _server.run() explicitly in my code,
that while loop will be in executionIf you call server.run() explicitly, then run() will be executed in the same thread that you called it in.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What is the difference between TO_CHAR and TO_DATE()?

Hi everybody,
i am facing a problem in my system.It is quite urgent, can you explain me "What is the difference between TO_CHAR and TO_DATE()?".
According to user's requirement, they need to generate a code with format "YYMRRR".
YY = year of current year
M = month of current month (IF M >=10 'A' ,M >=11 'B' , M >=10 'C')
RRR = sequence number
Example: we have table USER(USER_ID , USER_NAME , USER_CODE)
EX: SYSDATE = "05-29-2012" MM-DD-YYYY
IF 10
ROW USER_ID , USER_NAME , USER_CODE
1- UID01 , AAAAA , 125001
2- UID02 , AAAAA , 125002
10- UID010 , AAAAA , 12A010
This is the original Script code. But This script runs very well at my Local. Right format. But it just happens wrong format on production.
12A010 (Right) => 11C010 (Wrong).
SELECT TO_CHAR(SYSDATE, 'YY') || DECODE( TO_CHAR(SYSDATE, 'MM'),'01','1', '02','2', '03','3', '04','4', '05','5', '06','6', '07','7', '08','8','09','9', '10','A', '11','B', '12','C') ||     NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE FROM TVC_VSL_SCH
     WHERE TO_CHAR(SYSDATE,'YY') = SUBSTR(USER_CODE,0,2)
     AND TO_CHAR(SYSDATE,'MM') = DECODE(SUBSTR(USER_CODE,3,1),'1','01',
          '2','02', '3','03', '4','04', '5','05',
          '6','06', '7','07', '8','08', '9','09',
          'A','10', 'B','11', 'C','12')
I want to know "What is the difference between TO_CHAR and TO_DATE()?".

try to use following select
with t as
(select TO_CHAR(SYSDATE, 'YY') ||
         DECODE(TO_CHAR(SYSDATE, 'MM'),
                '01', '1',
                '02', '2',
                '03', '3',
                '04', '4',
                '05', '5',
                '06', '6',
                '07', '7',
                '08', '8',
                '09', '9',
                '10', 'A',
                '11', 'B',
                '12', 'C') as code
    from dual)
SELECT t.code || NVL(SUBSTR(MAX(USER_CODE), 4, 3), '000') USER_CODE
FROM TVC_VSL_SCH
WHERE SUBSTR(USER_CODE, 1, 3) = t.codeand yes you need check time on your prodaction server
good luck
Edited by: Galbarad on May 29, 2012 3:56 AM

What's the difference between Mozilla and Firefox

what's the difference between MOZILLA and FIREFOX?

Firefox doesn't include the SeaMonkey suite. 
SeaMonkey is a separate program (not just a browser, but a suite) maintained outside the Mozilla Corporation.
From http://en.wikipedia.org/wiki/SeaMonkey
<blockquote>SeaMonkey is a free and open source[3] cross-platform Internet suite. 
It is the continuation of the former Mozilla Application Suite, based on the same source code. 
 
The development of SeaMonkey is community-driven, in contrast to the Mozilla Application Suite, which until its last released version (1.7.13) was governed by the Mozilla Foundation. The new project-leading group is the SeaMonkey Council.
</blockquote>

What is the key column name and value column name in JDBC Adapter parameter

Hi
Can any one please tell me what is the Key Column Name and Key Column Value in JDBC adatper parameters. If i dont mention those parameters i am getting the following error
 Value missing for mandatory configuration attribute tableEOColumnNameId
Please help me
Best Regards
Ravi Shankar B

Hi
I am doing DataBase Lookup in XI
First i have created a Table in Database( CheckUser) which has two fields UserName and PhoneNumber and then i have created
I have created one Communication Channel For Reciever Adapter .
I have given the parameters like this
JDBC Driver : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:microsoft:sqlserver://10.7.1.43:1433;DatabaseName=Ravi;
UserName.... sa
password.... sa
persistence : Database
Database Table Name : CheckUser
Key column name and Value column name i left blank and activated
and then
I have created
Data Types : Source ...... UserName
 Destination.... PhoneNumber
Message Types
Message Interfaces
In Message Mapping
 I have created one User Defined function DBProcessing_SpecialAPI().This method will get the data from the database....
In this function i have written the following code
 //write your code here
String query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
query = "select Password from CheckUser where UserName = ' " +UserName[0]+ " ' ";
try {
 channel = LookupService.getChannel("Ravi","CC_JDBC");
 accessor = LookupService.getDataBaseAccessor(channel);
 resultSet = accessor.execute(query);
 for(Iterator rows = resultSet.getRows();rows.hasNext();){
 Map rowMap = (Map)rows.next();
 result.addValue((String)rowMap.get("Password"));
catch(Exception e){
 result.addValue(e.getMessage());
finally{
 try{
 if(accessor != null)
 accessor.close();
 }catch(Exception e){
 result.addValue(e.getMessage());
And the i have mapped like this
UserName -
> DBProcessing_SpecialAPI----
>PhoneNumber
when i am testing this mapping i am getting the following error
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Dest_JDBC_MT xmlns:ns0="http://filetofilescenario.com/ilg"><phoneNumber>Plain exception:Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
 at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61)
 at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98)
 at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38)
 at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270)
 at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70)
 at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
 at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
 at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</phoneNumber></ns0:Dest_JDBC_MT>
In RWB i have checked the status of JDBC driver its showing the following error
Value missing for mandatory configuration attribute tableEOColumnNameId
Best Regards
Ravi Shankar B
Message was edited by:
 RaviShankar B

What is the difference between subroutine and function module?

What is the difference between subroutine and function module?

Hi,
they can both return values.
FMs are mainly used when a routine is to be performed by many programs.
Subroutines (forms) are generally only executed within one program.
You can perform routines from other programs, but it's not often done.
both forms and FMs are reusable modularization units.
To distinguish we generally say that forms are used for internal modularization and
FMs are used for external modularization.
To decide on which to implement, consider whether you need the content to be used just for a limited program
or wheteher it can be called from many independent programs.
For the first purpose it is better to implement a form whereas for the second we implement an FM.
However, ABAP does not isolate the usage context.
That is; you can call a form from another program within whose code the form is not actually implemented.
However, this requires attention since the form may utilize global variables.
The same issue holds for FMs.
FMs are encapsulated in function groups and function groups may have global variables that can be globally
used by all FMs inside it.
Thanks,
Reward If Helpful.

What is the difference between ABAP and HR-ABAP?

Hi people,
Could u just tel me abt what is the difference between ABAP and HR-ABAP?
Thanks in advance,
Sanjeev K.V

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
Also,
HR:
HR deals with the INFOTYPES which are similar to Tables in General ABAP.
There are different ways of fetching data from these infotypes.
There are different areas in HR LIKE Personal Admn, Orgn Management, Benefits, Time amangement, Event Management, Payroll etc
Infotypes for these areas are different from one another area.
storing of records data in each type of area is different
LDBS like PNP are used in HR programing.
Instead of Select.. we use some ROUTINES and PROVIDE..ENDPROVIDE.. etc
and in the case of Pay roll we use Clusters and we Import and Export them for data fetching.
On the whole Normal ABAP is different from HR abap.
For Personal Admn the Infotypes start with PA0000 to PA1999
Time Related Infotypes start with PA2000 to PA2999.
Orgn related Infotypes start with HRP1000 to HRP1999.
All custom developed infotypes stsrat with PA9000 onwards.
In payroll processing we use Clusters like PCL1,2,3 and 4.
Instead of Select query we use PROVIDE and ENDPROVIDE..
You have to assign a Logical Database in the attributes PNP.
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
And finally,
Few notes are below:
InfoSets in the HR Application
You can use SAP Query in HR to report on HR data. Queries are maintained as described in Creating Queries. The special features of queries created for HR are described in Maintaining Queries in the Human Resources Application. The maintenance procedure for HR InfoSets differs from the described procedure inasmuch as HR data fields are grouped together in infotypes.
InfoSet management in SAP Query is also used for InfoSet Query. For further information, see Functions for Managing InfoSets.
If you want to create InfoSets for HR, you can use logical databases PNP, PNPCE, PAP, and PCH (see HR Logical Databases). The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
The reports you can execute using InfoSets based on logical databases PNP (or PNPCE) or PCH are similar, but differ in that they can select different objects. The following table describes the connection between the logical database, and the infotypes you can include in an InfoSet. It also provides you with one or two examples of reports that you can execute using the appropriate InfoSets.
Logical database PNP/PNPCE* PCH PAP
Selection of Persons Objects from Personnel Planning Applicants
Infotypes that can be included in the InfoSet Infotypes for· Personnel Administration (0000-0999) · Time Management (2000-2999) · Payroll infotypes · Infotypes for Personnel Planning objects that can be related to persons If the object type is specified:· Infotypes for the object type · Infotypes for objects that can be related to the specified object typeIf the object type is not specified:· All infotypes · Infotypes for Recruitment (4000-4999)· Some infotypes for Personnel Administration (such as 0001 and 0002)
· Customer infotypes
Reporting examples · Selection of all persons who participated in a specific business event, output of prices for reserved business events · Selection of all persons assigned to a specific personnel area, output of qualifications held by these persons · Selection of all business events held in London in March, output of all persons who participated in these business events · Selection of all positions assigned to a specific organizational unit, output of all persons assigned to the positions · Selection of all applicants hired last year to work on special projects, output of addresses for the applicants selected
Logical database PNPCE (PNP Concurrent Employment) functions just like logical database PNP. The procedure for creating InfoSets is also the same. It only becomes significant if you work with Concurrent Employment.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the corresponding field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
§ Logical database PNPCE or PNP Personnel number
§ Logical database PAP Applicant number
§ Logical database PCH Object ID, plan version, and object type
6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using Drag&Drop.
7. To save the InfoSet, choose .
8. To generate the InfoSet, choose .
On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
sample code
START-OF-SELECTION.
GET pernr.
rp_provide_from_frst p0000 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0001 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0001-plans. " earliest.
endif.
endif.
rp_provide_from_last p0014 space pn-begda pn-endda.
if pnp-sw-found EQ '1'.
READ TABLE p0014 WITH KEY pernr = p0000-pernr.
if sy-subrc = 0.
write : p0014-LGART. .
endif.
endif.

What is the best malwear detection and protection for use on a Mac?

What is the best malwear detection and protection for use on a Mac?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

What's the code of SetCINArraySize and NumericArrayResize? Thanks

Similar Messages

Maybe you are looking for