What tcode do I use to run report RHXSTR00

Hi
Please tell me What tcode do I use to run report RHXSTR00?
Cheers
B

Hi BP,
The tcode for the report RHXSTR00 is RE_RHXSTR00.
You can find the tcode for any report by writing a small code if you are a technical person. I mean if you are an ABAP Programmer. You can use the following sample code to get the tcode of any report program.
REPORT zreptcode.
TABLES: tstc.
DATA: w_tcode TYPE tcode.
SELECT tcode
       INTO w_tcode
       FROM tstc
       WHERE pgmna EQ 'RHXSTR00'.
ENDSELECT.
Write: w_tcode.
Execute the above code and check. Sorry forgot to say TSTC is the table where you can find the tcode of any report program.
Reward points if useful!!!
Cheers,
Ramalakshmi Challa.

Similar Messages

What is vendor performance report what are the fields using in the report

What is vendor performance report what are the fields using in the report and i need some sample reports for that particular topic (clasical report)not using any alvs or any advance topics.
U R Satish Patnaik

hi
good
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
reward point if helpful.
thanks
mrutyun^

What r the tables used for this report.

hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.

Hi Ashok,
this is easy to do.
Open Two SAP Screen with same user ID.
Run SQL trace using ST05 transaction.Open ST05 transaction in One and make
Trace on ,Run the report in another screen.
Once report run is over.End the trace process and click on display trace in same ST05 transaction.There is a click button on ST05 Transaction screen to start trace
process,End trace process and Display track process.
The SQL trace will give you all the table details which is used in that particular report.
You have not mentioned about the report name so I have suggested this way.
regards,nishant
Please reward if this helps

What are the tables used for this Report

hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.
9994262112.

hi
good
try with these tables,
MARA
KNA1
thanks
mrutyun^

How to see what Tables are being used in all reports

Post Author: tmashley
CA Forum: Crystal Reports
Hello,
How can I see what database tables are used in all my online reports? I have around 1000 reports posted to Enterprise over 6 different datasources. If possible I would like to see the fields within those tables that are being used to.
I am using Crystal Reports XI Release 2
Any help is appreciated
Thanks,
Tom

I don't think you can see the databases of the reports unless you download the report onto your pc as a Crystal Report format and then open it under Crystal Reports.
This way it will open the report within Crystal Reports and will show you the datasource it is coming from.
I doubt if you can see them online.
Kind Regards
Jehanzeb

What application do I use to run an installment CD?

Okay, so I just got a iMac, and I'm verrry new to them (I know nothing about them). I'm pretty sure its a g5 powermac and it has Mac OSX. I'm trying to install a Netgear N300 Wireless USB adapter (its a WNA3100). I tried to run the installment cd but it said "an application has not yet been chosen to run this, which would you like to choose). I've tried everything! What application should I use? HELP, WHAT DO I DO??
Love,
Randa

BDAqua wrote:
But are those USB Wifi adapters???…
I would say so, they connect me to the wireless Netgear router wirelessly, which is in turn connected to the Siemens DSL router by Ethernet cable..
This is the model I got: http://eshop.macsales.com/item/Asus/USBN10/
I remember the OS X Internet software guiding me through the very easy and fast connection.
However, it did come with a Mac driver and it is of course possible that I did install it at the time and don't remember doing so any more. But I'd like to think that is not the case.

What is the best UI for running reports?

Based on my experience, am I correct in assuming the Silverlight UI is still the only one supported for running reports?
Running reports in the html5 UI is not a comparable experience at all.... yet .
Which UI do you use for your implementation?

I agree 100%... HTML5 UI for Reports is very clunky, slower and not intuitive when Silverlight's is much better.
We actually use the Excel Add-In a lot now, we just build the report's shell in C4C quickly and then do our View/Selection customization in Excel. We find it quite fast and everyone knows how to play with Excel reports quickly.
Since 1402 I believe, the user-experience in the iPad app SAP Customer Insight is also much better with the introduction of dashboards in HTML5 though.
JB.

Tcode for run reports

which SAP tcode can be used to run reports to list the display for parts current source list supplier and most update infro record price?

Hi,
Check in tables,
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT Selection properties of an element
RSZELTDIR Directory of the reporting component elements
RSZCOMPIC Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV Global Variables in Reporting
Thanks
Reddy

Running reports stored in the database

Hi guys,
Is it possible to have Reports 6i produce reports that are
stored in the database? Looking at the documentation, it would
appear the report definition files (RDF) must be stored in the
filesystem. I don't really want to be handing out filesystem
access (managing and it) to people - is there a way around this?
Thanks,
denty.

user5780461 wrote:
Hi,
Would anyone have any recommendations regrading running reports based on the data stored in an oracle database. We will soon go live with a project using an oracle DB. We do not wish to run reports directly from the production DB as it will impact performance. Have you actually measured the impact? If not, you are just making assumptions that -- lacking any other informatin -- appear to be invalid.
Is there any recommended method/architecture for reporting suggested by oracle for this type of scenario?
You make it sound like some unusual scenario. What you've described so far (running reports against an OLTP database) is just bread and butter operations for Oracle.
One idea is too runs some scripts that will write the data to another database and from there we will runs out reporting queries. Are there any other potential solutions?
And how does reading the data to insert into some other database cause less contention than reading data for a report?
>
Many thanks,
Ro

How to run report from form 10g

Dear All,
I have code of forms 6i that i used to run report. but when i run this code through forms 10g this gives message that use RUN_REPORT_OBJECT instead.
please convert my code to 10g .
==============================================
pl_id:=Get_Parameter_List('tmpdata');
     IF NOT Id_Null(pl_id) THEN
          Destroy_Parameter_List(pl_id);
     END IF;
     pl_id:=Create_Parameter_List('tmpdata');
     Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     Add_Parameter(pl_id, 'P_FROM', TEXT_PARAMETER,:FROM);
     Add_Parameter(pl_id, 'P_TO', TEXT_PARAMETER, :TO);
Run_Product(REPORTS,'ANNEX_B_CONSTRUCTION_QUALITY',SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
=======================================================
Many thanks

Some sample code. Create REPORT1 under Report node of the form.
DECLARE
PL_ID                 ParamList;
v_rep_id          REPORT_OBJECT;
v_rep            VARCHAR2(200);
v_rep_file        VARCHAR2(100); --Added to change create a unique file each time report created.
v_tmp_path                         varchar2(250);
BEGIN
v_rep_id := FIND_REPORT_OBJECT('REPORT1');
v_rep_file:=USER||'_'||to_char(SYSDATE,'DDMMYYYY_HH24MISS');
pl_id:=Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List(pl_id);
END IF;
pl_id:=Create_Parameter_List('tmpdata');
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'P_FROM', TEXT_PARAMETER,:FROM);
Add_Parameter(pl_id, 'P_TO', TEXT_PARAMETER, :TO);
--Run_Product(REPORTS,'ANNEX_B_CONSTRUCTION_QUALITY',SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_FILENAME, 'tested_part_report'||'.rdf');
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_DESNAME,v_tmp_path||v_rep_file||'_Tested_Part_Report.pdf');
v_rep := RUN_REPORT_OBJECT(v_rep_id,PL_ID);
--You should have a virtual path set as /output/ in Application server
--Show the pdf output create in the folder mapped to output
Web.Show_Document('/output/'||v_rep_file||'_Tested_Part_Report.pdf','_blank');
END;You need to put the files in the path (As set in the registry of application server) . Needed application server knowledge to deploy the reports.
Edited by: Lokanath Giri on २२ दिसंबर, २०११ ११:०३ पूर्वाह्न
Edited by: Lokanath Giri on २२ दिसंबर, २०११ ११:५९ पूर्वाह्न

What is your favorite way of running 32 bit apps in Arch64?

I'm curious as to what methods Arch64 users use to run their 32 bit applications and what is your opinion on them.
I myself relies mostly on lib32 packages to run a few applications that I need (mostly flash & wine), which works quite nicely expect it makes my system feel a bit 'messier'. chroot looks like a nice option but I've not tried it out yet (it looks complicated to setup to be honest).

Agent69 wrote:
azleifel wrote:I use a chroot to run Epson's 32bit-only binary driver for my 3170 Photo scanner plus XSane and VueScan - something of a waste of disk space but needs must etc. - and lib32 packages for everything else that's 32bit, including nspluginwrapper-flash, CrossOver Linux and Google Earth.
It's good to know that someone has VueScan working on their x64 box. It is the one thing that keeps me dual booting with Vista.
However, just like Zodmaner, chroot looks complicated.
Setting up a chroot isn't that difficult, there are just has a lot of steps to follow! VueScan works for me in a 32bit chroot with just one issue - for some reason it loses the ability to initialise my scanner and I have to run XSane first to do the initialisation before starting VueScan. I had the same problem running VueScan in a 32bit chroot on 64bit Ubuntu, so it's not an Arch-specific problem, and Ed Hamrick wasn't able to help when I emailed him.

REP-300 Error while running report using App Server

Hi,
I am currently trying to run a report using the Application Server.
This report is being called from a form.
I am able to connect to the report server and all configurations seems to be correct.
But when I execute the report from the form, I am getting error "Unable to run report"
When I look at the error message in the Report Server queue, I find
"REP-300 Table or View does not exist.."
But that table does exist in the database.
What could be be the problem ?
Please help.
The code in the form that calls the report is
report_id := FIND_REPORT_OBJECT( report_name );
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id ,REPORT_OTHER, 'paramform=yes p_user_connect='||vc_connect ||' p_servername=repsrv'||' p_action=<host>/reports/rwservlet?' );
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id);

The report is working perfectly fine when I run it from the Report Builder. I get the correct output.
I am getting this error when I try to run the report through a Report server.
I run the form from the Forms 10g builder. This form has a button "Run Report". When I click on the button the report is run using the Report server.
This is when I get the error.
There are other forms that are also called via the same form. Those work fine. The only difference between those forms and this one is that this one has user parameters passed to it. This one also has an attached library attached to it.
The code in the Form to call the report is
report_id := FIND_REPORT_OBJECT( report_name );
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'rep-vena01-xp');
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id );
v_jobid := substr( v_rep, length( v_reportserver) + 2, length(v_rep) );
v_repstatus := REPORT_OBJECT_STATUS( v_rep );
IF ( v_repstatus = 'FINISHED' ) THEN
v_url := '/reports/rwservlet/getjobid' || v_jobid || '?server=' || v_reportserver ;
web.show_document( v_url, '_BLANK' );
END IF;

What is the best practice for running a long report/query against an active database?

We are using SQL Server 2012 EE but currently do not have the option to run queries on a R/O mirror though that is my long term goal. I am concerned I may still run into the below issue in that scenario as well since the mirror would also be updating data I
am querying.
I have a view that joins across several tables from two databases and is used by an invoicing program on existing data. Three of these tables are also actively updated by ongoing transactions. Running a report that used this view did not use to be a problem
but now our database is getting larger and we have run into some timeout problems for the live transactions coming in.
First the report query was timing out so I set command timeout to 0 and reran the query which pegged all 4 CPUs 100% for 90 minutes and so I finally killed it. Strangely there were no problems with active transactions during that time so I'm wondering if the
query was really running doing anything useful or somehow spinning and waiting. I reviewed the view and found a field I was joining on that was not indexed so created an index on that field, reran the report, which then finished in three minutes and all the
CPUs were busy but not at all pegged out. Same data queried both times. I figured problem solved. Of course later, my boss ran a similar invoice report, with the same amount of data, and our live transactions started timing out 100% while his query was running.
I did not get a chance to see the CPU usage during that time.
I looked at the execution plan of the underlying view and added the suggested index but that did not help. When I run the just the view at SQL Server it does not seem to cause any problems and finished in a couple seconds. Perhaps something else going on in
the reporting tool using the view.
My main question is - Given I have to use the live and active database, what is the proper way to run a long R/O query/report so that active transactions can still continue to update
tables that I am querying? sp_who2 did show transactions being blocked so I guess a long query accessing the tables blocks live transactions accessing those same tables, but certainly I'm not the only one doing this. I
am considering adding "with (nolock)" but am hoping there is a better standard practice as that clause can return dirty data and I understand why. Thx, Dave
Thanks, Dave
Dave

Hello
You can change the DB isolation level to Read uncommitted
http://technet.microsoft.com/en-us/library/ms378149(v=sql.110).aspx
or use WITH (NOLOCK)
I do use NOLOCK option for the dirty reads to avoid locks on the tables
Javier Villegas |
@javier_vill | http://sql-javier-villegas.blogspot.com/
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

What to install to run reports through application server!

Dear All,
I have to run reports developed in Oracle 6i windows platform on web.
I have to install this application server on Linux operating system.
Kindly help me what components of application server 10gR2 I need to install to configure reports.
Is there any tutorial available?
Regards,Imran

I am installing forms and reports services standalone on CentOS 5.Well, CentOS is not certified by Oracle, but it's a Red Hat clone, so you shouldn't have problems.
Nevertheless I have to say that I've never used it for Application Server (I normally use Oracle Linux).
is there any tutorial to install report services standalone on CentOS operating system?Follow the Linux Red Hat sections within above link.

Get a Report crashed error while running report using the mode character

Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.

Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent.

What tcode do I use to run report RHXSTR00

Similar Messages

Maybe you are looking for