What to do if the request the wrong data.

Hi all,
for one datatarget we running delta loads daily.
for one request if find wrong data.
please tell how much correct the data and load data(data target is delta enabled ).
thanks,
cheta

Hi,
When you have a bad request in your data target, what you can do is make the QM status red manually for that request and then go to the data target and delete the bad request; and when you run the IP again it will ask you confirmation for repeat the last delta request. So, you can get last delta (that failed one for which we deleted the bad request) along with new delta.
Hope this solves your concern...
Regards,
Habeeb

Similar Messages

Calendar app icon is displaying the wrong date

For some reason on my iPhone's homescreen the icon for the Calendar app has today started displaying the wrong date.
It should show today's date, Monday 6th but instead it reads Sunday 5th.
What confuses me is that the phone does know the date is Monday 6th as the lock screen shows it correctly and also when I actually load the Calendar app it starts on the right date. Also, when I load the multi task bar the Calendar app icon there is correct. See the attached photo, which shows the Calendar app on the home screen (faded, middle left) displaying yesterdays date Sunday 5th, while the app icon in the multi task bar is correct, Monday 6th.
Syncing the calendar with my iMac does not correct the error. Equally, turning the phone off and on again has not sorted it.
Does anyone have any idea what might be causing the fault? And more importantly how to correct it?
Thanks.

Thanks for the suggestion DaVBMan, sadly it didn't work. The only thing that did work was to wait until midnight and it corrected itself. In the mind of the phone it lived a whole day twice and then skipped one completely in order to get back on track. Very odd and also I have since discovered it has happened to a few of my friends too.
It's not happened again so I have no idea what so ever what caused it. Fingers crossed it never recurs.

Access Table displays the wrong data

I have successfully used Migration Workbench to migrate my tables and data into an oracle 10g database.
I chose Modify Access Database from the MWB options in order to continue to use Access as the Frontend.
At this point the forms do not work.
What I noticed is that the oracle link tables _R have the wrong data in them when opened via Access. But if I query the oracle db the data is correct. I added a primary key but this did not help. Any suggestions ?
Also I had to re load the code modules that run the application they disappeared during the migration process. Is that normal?
Thanks for your help

The table had the wrong columns and the wrong data, basically it was mapped to the wrong table.
I checked the properties from the table detail window, much more helpful than right clicking on the object and choosing properties which only show you the DSN connection. The detailed description as shown below shows the table is incorrect
ODBC;DSN=marilyn2;DBQ=ORCL ;DBA=W;APA=T;EXC=F;FEN=T;QTO=T;FRC=10;FDL=10;LOB=T;RST=T;GDE=F;FRL=F;BAM=IfAllSuccessful;MTS=F;MDI=F;CSR=F;FWC=F;PFC=10;TLO=0;;TABLE=BODYSHOP_EXTRACT.CONTRACTS_INFORMATION_TABLE.
Can I just delete the linked table and import the correct table using Link Manager? Or do I need to use OMWB & Modify Access through the tool?
Last question for today thanks

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

Calendar List view shows entries under the wrong date

I just upgraded to iOS4 and finding that my calendar entries are appearing under the wrong date in the calendar list view when I am viewing two calendars.
- List view is ok when viewing 1 calendar
- Day and Month views are ok at all times (ie: viewing single or multiple calendars)
- I have 2 Exchange accounts
- Calendar entries are appearing in the correct order, but under the incorrect date heading.
- When I intially added the Exchange accounts the calendar list view was fine at first (I could see both calendars correctly in list view) but after a short time later it became screwed up.
Anyone else experience this?

Same problem here since my upgrade to iOS4 - but I only noticed today.
I have 3 calendars set up:
Gmail (Exchange)
UK Holidays (iCal)
Birthdays
The exchange calendar is always wrong but the other two are correct when my exchange calendar is switched off.
It has mucked up my scheduling a bit for the next month. I only became suspicious when I noticed the Scottish Bank Holiday Monday at the beginning of August was showing on FRIDAY, 30th of July!

My new macbook pro (lion) iCal has been showing the wrong date?

My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed?
I think it might be showing 2011 date? How can i fix this and do I have back-up of my original dates?

Good to hear . Happy computing!

Accidentally put in the wrong date of birth!!!

I accidentally put in the wrong date of Birth when signing in to Creative Cloud. Now its locked me out and I can't log in at all.
I logged in to my main Adobe ID account to see if I could change my date of birth but could not see how to do it!
Can someone help me change this so I can use the system.
At the moment according to Creative Cloud Im a 9 year old 29 year old!!!
Matt

You will need to contact Customer Support to fix the date-of-birth:
Phone number: 800-833-6687, Monday-Friday, 5am-7pm PST
Chat with an agent: http://tinyurl.com/8kquhso

Why do I get the wrong date on my photos and emails?

All my photos in iphoto and emails are coming up with the wrong date. Why is this and how can I correct it?
I have made sure that the computer's date and time are ok.

You may want to re-post in the iPhoto forum if it only happens in iPhoto.

PDF saving with the wrong date

When I save a file, it saves with the wrong date: it is off by 5 years and 1 day and the time is completely wrong. This has been happening for months and has not been fixed by installing newer versions of Adobe Reader (I currently have version 10.1.7). The date/time on my computer is fine and Microsoft Word documents save with the right date & time...

I'm actually having a similar problem with the computers that are used at my work, though not with a 5 year difference; Our pdfs get saved as if it were 2 days previous. We use mostly AutoCAD and print to PDF. The pdf gets saved to a shared drive, but everything else that we save on that drive (word documents, excel spreadsheets, AutoCAD files, etc.) have the correct date. I checked to see if maybe it had something to do with the time stamp server settings, but we don't have a server set up. The time on all of our computers is also set to the current date and time. We do sometimes save pdfs from outlook, from clients, but have the problem regardless of if we were using outlook or not. It's not a terribly huge deal, but sometimes we check to see when pdfs were updated versus their corresponding drawings and it gets confusing when the date is off. Any help would be appreciated. Thank you.

Urgent BEX Report Showing the Wrong data

Hi Experts,
In my Cube the data is available curreclty, but where as my bex report showing the wrong data.
like xeample:
Infocube
Material               Plant    Year    Units Qty
000000000002001032     003     2006     BAG   1,500
But in bex i took the same selection's, but it displays as
000000000002001032     003     2006     BAG   2
i am Unable to trace this
any help plzzz
Anil

Hi,
since Quantity(units PC??) can not be in decimals,Bex will round off 1.5 to 2 in bex report.
Use NODIM function i.e. NODIM(Qty) instead of Quantity.
NODIM function is available under data functions of Formula builder.
From context menu fo KF structure>new formula>NODIM(Qty).
or
try by setting Decimal places to 2 or 3 in KF properties in Bex Query.
hope this helps.
Message was edited by: Murali

My calender is showin the wrong date on the screen why is that?

my calender is showing the wrong date how can I fix that can anyone help me?

try rebooting your phone
hold the home and lock button until the apple appears then let go

SimpleDateFormat gives the wrong date

Hi
I'm retreiving a java.sql.Date, and using a SimpleDateFormat("dd.MM.yyyy") to format it. For some reason, some of my users (located in other countries) end up with the wrong dates (it's an applet)and others don't. Any similar experiences/thoughts?

Thanks for the info....I'm using 1.3, so that's unlikely to be it.
I narrowed it down to a timezone problem difference problem between my applet and the server. Does anyone know how I can get an applet to behave like it's in a different timezone. Is there a single place I can set it (like maybe a System.setTimezone or something?). I don't want to go around messing with my Locales in every single Date or Calendar object I use. I just need my applets to think they're running in the same timezone as the server. Any similar experiences/quick fixes?

What to do when the wrong payment is voided?

Hello,
I need a pointer in the right direction.
An user has voided the wrong check. This check has already been cashed, but Cash Management has not reconciled it in the system yet.
So now, we have an invoice that is re-opened, and a void in the positive pay that is going to the bank on a cashed check! Help!
The way I see it we can:
- ask her to record a manual payment on the invoice. That should "fix" the accounting problems (right?!)
- somehow work with the Cash Management folks (we're 11.5.9, so its still Treasury here) to reconcile the payments correctly?
- do we need to inform the bank?
Any one have any advice?!
Thanks!

Thanks, I also read around a bit more and found this
http://support.apple.com/kb/HT1427

IPhoto gets the wrong date/time when importing photos

I just imported a bunch of photos from a Canon Digital Rebel XT. I took the photos today, 10/22/05, but iPhoto has them labelled with yesterday's date. Furthermore, the times are incorrect, with AM and PM apparently switched.
Looking back now, it seems that there's the same problem with all of the photos I've imported with this camera (which I got last month). I don't know if iPhoto has been screwing these things up the whole time, or if this is something that just happened.
I've just triple checked the date/time setting on the camera and confirmed that it is correct. I've confirmed that my computer's date & time are correct also. The other data imported with each photo appears to be correct (e.g. camera make & modal, focal length, ISO speed, etc.).
Anyone have any idea what's going on and how I can fix it?

Jason,
Which date are you referring to? The EXIF date that is in the Get info window, or the date that is listed in the left info window. If it is the date that is in the info window on the left it is easy enough to fix. Just highlight and put in the correct date. If you need to do this to a lot of images then use the batch change function.
If the EXIF data is wrong, I recommend using the software from canon to get the best EXIF data added to your pics. I realize this adds an additional step, but it will fix your problem. The other thing is that if you start to shoot in RAW, your camera is not supported by iPhoto. So if you attempt to import RAW files from the XT directly into iPhoto it will not import them. I have this camera and it is one of the reasons I have stopped using iPhoto for most things.
You can get the latest versions of the canon software from Canon.com I recommend using these as they are much better than what was in the box that came with my XT. If you plan on working with RAW get the Digital Photo Professional (DDP) Along with the Canons image browser. Both work well on my powerbook and should be great on a Powermac.
Hope this helps.
Matt

When I save a picture in CS5 it uses the wrong date.

I reloaded and saved the same jpg in photoshop elements and t he date is correct. CS 5 also makes this error in one directory only, BUT it happens to be the directory I earn my living in. Has anyone else had this problem, and is there a fix. The dates are essential for my job.

Thanks for following up and describing the problem in more detail.
Interesting.
I just opened a PSD file I saved yesterday, then did File - Save As, and saved it as a brand new JPEG file. I also tried with Save for Web & Devices. In both cases all the dates (created, modified, accessed) were set to the current time.
Earlier You mention it only happening in one folder, but not others... Which one?
Also I have a wild hunch for something to try, if you're willing... Chances are it will amount to nothing, but hey, maybe...
On my computer I have set Windows to show file extensions in all cases. Do you?
In Windows Explorer, choose Tools - Folder Options, and click on the View tab. Uncheck the Hide extensions for known file types box, then try going through your process again of constructing your file and saving as a JPEG.
This setting is reversible, and if you simply don't want to go through the trouble, I fully understand. I only bring it up because made a random connection between this and a problem a user on this forum where Photoshop seemed to be using information from the wrong file until this setting was changed. I could only guess there's an ambiguity having to do with the different filenames (e.g., .psd and .jpg in that other user's case) both looking the same in the dialog, e.g., ImageFile (Photoshop document) vs. ImageFile (JPG file).
Beyond resolving the problem this way, you could always embed the date into the filenames of all further files you save, e.g., 09_25_2010_Medical_Images.jpg. You would, of course, have to do something special (e.g., add a sequence number) if you did more than one a day.
Thanks again for clarifying what you're seeing.
-Noel

What to do if the request the wrong data.

Similar Messages

Maybe you are looking for