What to do when there is lot of packets pending for processing in queue

Hi,
In our application, we have service bus queue, one of the Web APIs (REST) picks the data from devices and puts into the Queue. The worker role picks the packets and process it.
To improve the speed of processing, what are the options available?
There are too many packets laying in the queue for hours.
Please help!
Thank you!

Hi sir,
Please try to handle your queue message in parallel. Base on my experience, you can create a pool of threads process. Every thread could pick the queue message and handle it. After finished it, you can discard the message or do other actions.
For this idea, I think this post and thread will give you some epiphany.
http://stackoverflow.com/questions/16779207/processing-messages-in-parallel-in-azure-service-bus
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

HT1600 Does anyone know what to do when there is a white light flashing on Apple TV? It says to hook to music note. Help

Does anyone know what to do when there is a white flashing light on the Apple TV

It means the update failed and your AppleTV can't start.
You need to restore by connecting to a computer running current iTunes via a USB to micro USB cable.
See:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

What to do if there is no relavent BADI/EXIT for standard transaction

Hi,
Can any one say,What to do if there is no relavent BADI/EXIT for standard transaction.
Helpful Answer will be rewarded.

SAP provide some hooks to add our code to the standard program. This is what we called enhancement.
It has following types:
1. Personalization ( here the fields can be hide, display only etc. )
2. Customer Exit ( Function module Exit, Menu Exit and Screen Exit )
3. BTE
4. BADI( Function module Exit, Menu Exit and Screen Exit )
5. User Exit
Suppose all these are not helpful, then you could create the code from scratch. But it is too difficult to develop because of its complexity.
So what you can do is get SAP access key and change the code in the standard program. This is called as modification. Advantage of Enhancement and modification is whenever there is a new version come the changes made by us in standard code will be attached in the newer version also.
The final way is copy the source code into customer namespace and make changes according to your criteria. Eg. in the standard PO creation if you do like this, several disadvantages are the user has to give a new t.code, BASIS guy has to restrict the standard PO create T.code and you can't avail the new features of future versions.
Hope this gives you complete picture and solution.

AdminExplorer won't automatically resize when there are lots of folders

Hello
On one of my portal pages there is an iView based on a modified AdminExplorer layout set. It is modified so that the folders are not displayed in the main area - only in the left hand tree area.
The iView is set to automatically resize. So when there are more files, the iView gets bigger instead of scrolling.
However, when the size of the folder tree increases (e.g. by opening subfolders in the tree area), the iView does not resize. Instead, a scroll bar appears for the tree area.
Does anyone know how I can fix this?

Why can't you use the Weblogic startup class to start your
client automatically when WebLogic Server starts ?
What version of Weblogic Server are you running ?

Font woes: what to do when there's an alleged conflict

I keep getting error messages when I try to activate certain fonts--for the moment, it's Optima--from Extensis Suitcase. The message is that the type 1 font conflicts with a font in the System Fonts folder. It doesn't--there is no Optima in that folder.
Suggestions?

The first thing to try would be to fire up the FontBook application. You can validate all or specific fonts. If you find a bad font you can then trash it, or re-install it if you can.

Does anybody know if and when there will be a plug in for raw files from the Nikon D810? I have lightroom 4

I am considering buying a Nikon D810 but I do not want to be waiting for ages for a plug in for it's RAW files on my Lightroom 4. Does anybody know if and when there will be a plug in? I presume the 8.5 plug in will not cover the cameras Raw file.

There is no plug-in for Lightroom 4 that would ever give you support for the new camera. Lightroom does not use Camera Raw. Camera Raw is a plug-in for Photoshop and Photoshop Elements. If you want support for your camera in Lightroom you will need to upgrade to Lightroom 5, and then wait for the 5.6 update which should be available within next few weeks (unless Lightroom 6 is introduced). In the meantime you can use the DNG converter (version 8.6 RC) to create DNG copies of your raw images that you would be able to open in Lightroom 4.

Does anyone know when there will be the hardcover cases for the new nano?

when do the clear, plastic hard cases for 5th gen nano come out?

Yeah, I even found an iShade by griffin at my local best buy for the 5G the day that I picked up my 16GB edition for the gym!
They're out... Also you can buy from just about all manufacturer's online now... I think some stores are still waiting to bring them in, as they had to much stuff for the 4G....

What to do when there are no errors?

When starting Quicktime it says it is switching but nothing ever happens. There are no errors listed. What do I need to do?

The term "switching" refers to "transport protocols" (UDP or HTTP). Those two options are found in your QuickTime Control Panel.
What is the URL you're trying to view when this issue occurs?

What to do when there is no "Post new topic" displayed?

I have encountered the most odd thing. I am trying to get into the Aperture discussion group which I have done many times before but for some reason now, there is no "Post new topic" when I log on. Every other discussion group I try has this message. Other people are still posting on Aperture.
So I obviously can't post my question there because I can't get in!
Any ideas as to what is wrong?
Thanks, John

John,
I hate to ask/suggest but are you visiting the particular Aperture forum you wish to post in or just the main Aperture page.
You must select a sub forum there to see a Post a New Topic link.
Sorry if that is not the problem but I have seen others make this mistake in other forums and just wanted to suggest in case that is the error.
best,
littleshoulders [:-)
edit: The two sub forums for Aperture are: Aperture Installation, Setup and General Usage and Aperture Book Printing and Design
Message was edited by: littleshoulders

Battery gauge showing empty when there's lots of charge left

I have a new 80GB 5G and after about 4 hours the battery indicator shows red and almost drained, but I've watched over 4 hours of video after that before the thing actually dies. What can I do to make the battery indicator at least a bit more accurate? It at least shouldn't be red unless it REALLY needs charge?

There's nothing really that you can od about it, if
anything, a restore (a restart first). This happens
to me though too. I recently used my iPod during a
hockey tournament trip on a charter bus, and played
my iPod through the VCR of the bus. I had maybe like
an almost red bar of life left on my iPod. It was
green, but 1 or 2 notches lower would have been red.
I got through about 1 and 3/4 movies before it
"died". After disconnected my iPod from it (right
after it "died") I went back to my seat, turned it
on, and listened to music for another half hour or
so.
So what you're seeing is pretty normal as far as I
can see. I remember a specific time when I had half
battery life left onhte gauge and was watching videos
on it with my friend (not connected to tv) and shot
down to red quite fast, but we got through 2 movies
and maybe more in the red zone.
Ok, cool. That was my main concern (whether this was normal and others had the same thing happen). Wow. Well, that's annoying but also presumably something they could improve via software. So, I'll just leave feedback for Apple on it and go happily on my way. As long as it's normal I'm not worried. Just seemed strange, especially since on my Nano, the battery gauge is pretty darn accurate.
Thanks Erick!

What it means when theres a lock and circle arrow amy i pod touchround it on

there is a lock with a circle arrow around it at the top of my i pod touch what that means

Orientation lock.
All the icons are covered in the manual:
Have a look:
iPod touch User Guide (For iOS 4.3 Software)

Time Machine deleting backups, says disk is full when there's lots of space

I recently successfully duplicated the sparse disk image bundles for two computers to a 1TB drive. Time Machine has been working just fine for weeks with this new setup and was backing up normally.
Then I began getting "Disk is full" errors and Time Machine is saying it is deleting back ups to create more space. This is confusing as the disk says there is over 740 GB available -- our back ups are not even totaling 200 GB combined.
How can I remedy this?
Thank you.

Hank,
I realized last night, after I shut everything down for a tornado warning form Hanna - no tornado..., that the spaces in the disk name were your immediate problem.....sorry
In addition to dragging the file, you can also type '\' as an escape character before things like spaces to say treat them as part of the name not, as in the case of a space, as a separator.
In your latest error message the term 'socket' implies possibly a link to use of a wireless connection. I seemed to have no trouble using a wireless link to re-size yesterday. I was pointing to a USB drive attached to the TC, not the TC's internal disk. You'd think it wouldn't make a difference, but......
I didn't want to mess with the live sparsebundles on the TC drive, and had copies for experimentation on a USB drive on the TC.... But today I tried it on the TC's drive via wireless and it works.
You might try a direct connection via Ethernet cable if you can.
In addition hdiutil has a -verbose option which you can add to the command line that gives additional detail and may yield a clue to the problem. It also had a -debug option that provides even more voluminous output which the man page says is "- debug and -verbose generate almost entirely independent outputs."
The format is like this:
hdiutil resize -size nnnG -verbose /path...to..sparsebundle
The -verbose and/or -debug go after the resize verb.
The -debug output is truly humongous! Try -verbose first if you need the diagnostic output.
These might help us get you going.

How can I burn more than 1 movie to a DVD when there is room on the disc for it. Premiere wants to overwrite once 1 movie is burned to the disc

How can I burn more than 1 movie onto a DVD? Once 1 movie is burned successfully to the disc, I try to burn another movie and Premiere wants to overwrite the first movie. One movie is 1.2 GB, second is 2.3; so there is room on a 4.7 GB DVD-RW.

susang
What you report is what it is.
Each burn to of Timeline content to DVD-VIDEO format on DVD disc results in the disc containing one OpenDVD Folder and one VIDEO_TS Folder.
Only one VIDEO_TS Folder can be put on a DVD-VIDEO disc even when Premiere Elements is not involved. I have seen that written about online, and I have
never found a way to overcome what seems to be basic behavior description of DVD-VIDEO..
Premiere Elements will allow you to write to a disc with content already on it, but only after you give the OK for erasing the disc content before going ahead
with the burn to.
If you have several movies, one possibility is to build a Timeline with the movies, use stop markers, and setup disc menus according so that the viewer
can selectively watch the movies. More on that later if wanted.
Any questions or need clarification, please ask.
Thank you.
ATR

Any news on when there will be a real fix for the Homefusion cantenna firmware fiasco?

Homefusion was great until February. since, almost unusable more often than not. now, no amount of rebooting or unplugging will connect. it's dead in the water. last time I talked to Verizon tech, they did something remote to "help" until the cantenna manufacturer fixed the software problem.
I don't understand at all why this thing doesn't work and can't be made to work. who thinks it OK to have to reboot as a routine everytime you want to go on the internet, much less watch it connect/disconnect all the while you're on. can't work on anything critical because it almost always disconnects before I'm through.
got to have some relief. paying for something I'm not getting.

ikenewton,
I am so sorry to hear of the issues you are having with your HomeFusion connecting and disconnecting. Had the HomeFusion done any software updates around the time it started having issues in February? Has the appointment already been scheduled to have a tech come on to your house? If so, when?
LindseyT_VZW
Follow us on Twitter @VZWSupport

Delete the payment details from a BPmaster data when there is still an deal

Hi All ,
what happens when i delete the payment details from a BP master data (counter party role in payment details tab ) when there is still an outstanding deal for this BP?
Will this be reflected in the saved deal, so will the deal go into error after the payment details have been removed?
I test this scenario in my dev system with following steps
1. I create a deal with t code FTR_CREATE
2. Delete all payment details from BP Master (counter party role in payment details tab )
3. i settle deal t code FTR_EDIT
4. I run TBB1 to create a payment request
5. then i run F111 and all required details and also payment request system is create payment without any error
all the able steps i did with out any error ... i think system should through error while running F111 t code because in BP master all data is deleted .
so i want to know whether system will through error mesg when we delete payment details from BP MASTER
regards

Hi,
The payment details are only a standing instruction which is captured by various create programs for respective financial transaction. Further, it is derived only once at the time of creation each time.
Deleting payment details will not give you any error message for already created transactions, for new transactions, you may have to put it manually at the time of creation else will throw an error message with TBB1.
Regards
Prasad AV

What to do when there is lot of packets pending for processing in queue

Similar Messages

Maybe you are looking for