What to use, to remove finger prints and screen clean

HI all
I am wanting to know what the best thing is, to remove finger prints off my MBP and generally keeping the screen clean. I do use that cloth that came with my MBP. Sometimes I need to rub it a few times to remove finger prints, but is there any liquid of spray or anything anyone recommend. Or what would be the best way? I know the manual says use a damp cloth. But I am worried if its damp a little it wont work, or if its too damp it might damage my screen?
Message was edited by: abz latif

Here's the "official" word:
http://support.apple.com/kb/HT3226
You have to click a few "disclosure triangles" in the document to view the details.

Similar Messages

I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?

I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?

I had a similar problem with a Canon MP800R under Mac OS X 10.9.2 Mavericks.
In my case, the MP Navigator app in the dock was linking to the wrong file.
It linked to Applications > MP Navigator 2.1.app > Contents > Resources > MP Navigator.app, but it should link to the "main" app, probably under Applications > MP Navigator 2.1.app.
After pulling the correct MP Navigator app file to the dock, I can start MP Navigator again by clicking on it in the dock. However, when clicking on it, a second MP Navigator icon will show up in the dock and stay there until the app is closed. By the way, the MP800R scanner also works (although officially not supported by Canon).

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Scanner in use error message. Print and scan doctor page not found

I have an officejet pro 8500a which is giving an error message: scanner in use. it frequently does this and I reboot computer, turn off router and prnter and then turn all back on again and it usually works. This time it won't. I was directed to download the print and scan doctor but whether I enter the address in the url or click on the link I am directed to a page saying that it is not found. What else can I do besides throw this through the window?

Hello @trishdg and welcome to the HP Forums!
Which operating system is on the computer you use the printer with?
If you make a Copy (as that uses the scanner) do you get any errors that indicate the scanner is in use then?
This Print and Scan Doctor link will start the download for you right away (meaning it doesn't take you to a page, that link starts the download as soon as you click on it ) so you won't feel the need to through anything out the window
Let me know how those steps go, and we will go from there!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL

WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL

Subhash,
You create and distribute a model in BD64. The details of that are stored in this tables.
A model gives you the details of the sender / receiving systems and what are the message types that are getting transferred between these systems.
Regarding the IDOC segments issue, can you explaing how are you triggering the IDOC and which message / idoc type you are dealing with.
Regards,
Ravi
Note :Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

HP finger print technology was not picked up by firefox4....how do i get ff4 to use HP's finger print technology...it was working fine on the previous version of ff

in my previous version of firefox, any time a userid and password were required, HP's finger print manger box came up and I was just able to swipe my finger print and the finger print manager would populate the userid and password automatically. After I installed firefox 4 the finger print manager does not come up. Not sure if firefox 4 recognizes the technology. How do I get HP's finger print manger to work on firefox 4??
Help!!!
Gary

The company that make the fingerprint scanner for HP have abandoned it, for more details see https://support.mozilla.com/en-US/questions/799388

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

Use TC for Wireless Printing and Backups Only on Existing Wireless Network

I am fairly clueless about this whole issue. I set up my current Belkin wireless router several years ago, and haven't had to fool with it once. I don't want to have to touch it--if it ain't broke............ However, I would like to use my Time Capsule I just purchased to backup via Time Machine wirelessly and attach a USB printer and print wirelessly. So the TC will not be used for internet, just want a separate wireless point for printing and backing up. Is this possible? I am not sure which choice to choose in Airport utility. I tried a couple different ways, and it didn't work. Can't honestly tell you what I tried, am a bit confused at this point!

If you have not already done so, I suggest that your start over on the AirPort Expess "from scratch" by performing a Factory Default Reset and then attempt to configure it to join the network again.
Resetting an AirPort Base Station or Time Capsule FAQ
If you have an older Express, make sure that you are not trying to configure it to connect to the 5 GHz network, as it is unable to do so.
Assuming that the name of the wireless network, wireless security setting and password on the Express match up with the AirPort Extreme, the Express should "join" the network if it is working correctly.
If you are still having problems, all that you really can do is try the default reset a few more times. If still no luck, the Express....which is at least 5-6 years old or older, may likely need to be replaced with a new model.

Finger Print Device not found using Think Advantage Finger Print Software

3000 N100, the finger print device can not be found when trying to set up profiles. The computer had been restored to new state using the function key at startup.
I deleted programs I did not want after that but the Think Advantage was left as is, I believe. I can get as far as trying to create finger print profiles, then I get the finger print device can not be found.
I am XP SP3
E/.
Message Edited by EmClark on 05-19-2009 10:42 AM
Tinkering All The Time
E/.

Solved...I downloaded the updated Fingerprint software from the driver page and that fixed it.
Tinkering All The Time
E/.

How do you remove error 0X00000709 from your computer? I just removed one printer and added another!

     I have a HP Pavilion Elite HPE computer and had an HP 6500 printer as my default. I purchased a LaserJet Pro CM1415 and loaded it into my computer and removed (I thought) was the software for the HP 6500.
     However when I try to make the CM1415 my default it gives me an error 0X00000709 and tells me I can not do it. I no longer have any other printer listed, however I noticed some programs (Adobe for instance) don't even recognize the new printer, just the 6500 which got removed. I have already removed the drivers (software) for the new printer and reloaded it. Also I checked the registry and the 6500 is listed there. I did nothing with the registry at this time.
     I would like to know how I can remove this error and make my new printer the default (only one listed) one? Thanks in advance for any and all answers

Hello Porgeman,
You may want to try the solution that is mentioned on this Microsoft Answers thread.
http://goo.gl/y3mtw
Method: Try to change the default printer value in registry key and check if it helps.
Registry Disclaimer: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 .
How to back up and restore the registry in Windowshttp://goo.gl/UPP7r)
a) Click on Start.
b) Type regedit in the start search and click Enter.
c) Move to the location mentioned below.
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
d) In the right column, you will find key Device, change the value to your Printer name.
e) It is of the format for example: "HP LaserJet 4250 PCL6,winspool,Ne03:".
f) Right click on the value and click on Rename, change it to your printer name.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

What is use of J1IS in Sales and in j1is why base value is blocked ?

Hi,
What is use of J1IS in Sales ?
tell me procedure why it is used in sales ?
When these are used ?
DLFC Factory sales and Stock transfers
GRPO Goods Receipts
MATD Material Document
OTHR Other
When we used this J1is we gave document reference OTHR and all necessary things but in next screen
all Material Related fields are empty and base value is blocked why it is blocked ?
I observe previous documents in that previous documents they used MATD But NOW it is not Taken it is allowed only OTHR.
Please provide me answers.
Regards,
Basha.

Hi Mandy,
You can do this:
On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
Alternatively,
You can also find some information about it on https://service.sap.com/srm within this link on the left frame go into
mySAP Supplier Relationship Mgmt --> mySAP SRM in Detail --> SRM 5.0 --> Catalog Content Management --> SRM-MDM Catalog and you will get the document.
Hope it helped.
Regards,
Krutarth

What is use of PD sub module and integration swithces in HR ?

Dear SAP-HR Experts .
(a) What are the integration swithces in HR .
like Integeration with in Sub modules of HR.
(b) what is use of PD sub module ?
Some t-codes of PD module , infotypes or Tables .
Plz it is urgent .
Regards : rajneesh

check
V_T77SO there u can find
i will let u know

Photosmart 8230. How do you Remove the print heads for cleaning?

Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
This question was solved.
View Solution.

I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET. You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them. The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
----- Original Message -----

Finger Prints On Screen?

Hey everyone...I was just wondering what i could wipe down my screen with because the finger prints are getting really anoyying...The screen is glass so could i use like...windex or somthing??? Im not to sure becuase i sont want to damage it.
Thanks

don't use glass cleaner to clean the screen. "Apple clearly stated not to use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean iPhone"
Get a microfiber cloth. I preferably use a Zwipes Glass Cloth since the iPhone screen is glass. These are usually available at your local automotive store such as O'Reilly's, Wal-mart ect.

Using Adobe Air Auto Print and Download in Web application

HI All,
We need to integration Adobe Air in the MVC4 Asp.net Application and Javascript. We have a requirement to download to the PDF/DOCX file into user selected destination and print it automatically.
Browser Support : IE, Firefox,Chrome and safari
Integrated with Javascript/JQuesry
It would be great any one of you provide the inputs how to integrate adobe air in the web application using javascript to achieve above requirement.
Send me the email [email protected]

Adobe has locked out silent printing except by use a privileged JavaScript add to each users system. See the Acrobat JS API Reference for more information.

What to use, to remove finger prints and screen clean

Similar Messages

Maybe you are looking for