What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Hi all,
Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

Hi
If you are running three shifts ,please maintain the data as given belwo
start :00:00:00
End:23:59:59
Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
No.of individual capacity :1
System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
Hope this helps
regards
Prakash

Similar Messages

HT201303 what will happen to my apple id after 5 time using it on iTunes on PC?

I have installted windows and formatted the drive ( disk c ) 4 times and my apple ID in the PC when I authorized it said you authorize 5 out of 5 times. I never used it on another computer but now what should i do? I did not know that I shoud deauthorize it befor formatting. so what will happen to my apple ID. please help me and give me more shots or find me a solution.thanks a lot.

If you've reached five authorizations for that account, there will be a button in your iTunes Store account information that will allow you to deauthorize all systems associated with that account. Log into your Store account and you should see it. You can then reauthorize the computer(s) you're using now.
For the future, it's best to deauthorize your system before reformatting the drive and reinstalling. That will help prevent a single computer from using up multiple authorizations.
Regards.

What will happen if i delete my icloud account from my macbook?

I have both an iPhone 4s and and a macbook pro, they are both signed in on the same icloud account, which my dad's phone is also signed in to. if i delete my icloud account from my macbook what will happen? i have already deleted it from my iphone and everything was still there, what with my mac?

You just need to sign out on the Mac, everything will be on iCloud but no longer on the Mac.
System Preferences>iCloud>Sign Out

Question about free down loading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns if I down load Mavericks then what will happen to Bangla

Question about free downloading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns is, if I download Mavericks then what will happen to Bangla language in mountain lion? Samar Laha

No reason to be embarassed. You are not alone.
You will need an external drive. If you have a Time Machine drive without enough disk space you can create the clone there however it's advised that you keep your Time Machine and clone on separate drives. If the drive dies you loose both types of backup.
Download and install the clone software. Everyone has their favorite. These are the two most common applications used. I prefer SuperDuper because of it's simplicity in setting up. It's also free for the first clone where with CCC you have to give a Credit Card then cancel if you do not want to keep.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Select your drive in the To popup. Click on Copy Now. That's it.
Yes, it really is that simple....

What will happen when I install Leopard?

So when leopard comes out in a few weeks and I install it, what will happen to all the files and apps on my computer. Will they be gone? Will I have to redo everything?
This is my first transition on a new OS X. I switched right aftr Tiger came out. What is going to happen?

Fair comment!
If you want the full nine yards:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

What will happen if i mention like load-on-startup -1 /load-on-startup ?

Hi All,
In my web.xml what will happen if i mention like <load-on-startup>
-1</load-on-startup> ?

It's not WebLogic-specific, the load-on-startup web.xml element is a standard common component to all application servers.
As for what it does, then yes, the BEA link explains it well enough. So that explanation applies to WAS too.

What will happen when my friend connects her ipod to my itunes?

I'm just worried something ridiculous will happen like one or both of our libraries will be erased or something. Can we share a library? I suppose if nothing else works, i can just get a rewritable CD and burn my library to it piece by piece and transfer it to hers that way. Guh.

It should've been created with whats called Thin Provisioning. The virtual machine would think it has 60 GBs but what is actually taken up is what the virtual machine has written to. The blank space isn't actually used yet. So you tell it that it has 60 GBs but the initial install install only takes up 6 GBs that means it's only taking up 6 GBs of your hard drive. If you install a program that takes 2 GBs then the total is up to 8 GBs. It always expands but doesn't shrink unless your shrink it manually. So if you deleted the 2 GB program you installed it will still take up 8 GBs of your hard drive.
Think of assigning it 60 GB as setting the max it can use, like the limit on a credit card. Just because your limit is $10,000 doesn't mean that's what you've charged to it yet.

How the data is stored in Info cube...in the back end what will happen???

Hi Experts,
How the data is stored in Info cube and DSO...in the back end what will happen???
I mean Cube contain Fact table and Dimension tables How the data will store and what will happen in the backend???
Regards,
Swetha.

Hi,
Please check :
How is data stored in DSO and Infocube
InfoCubes are made up of a number of InfoObjects. All InfoObjects (characteristics and key figures) are available independent of the InfoCube. Characteristics refer to master data with their attributes and text descriptions.
An InfoCube consists of several InfoObjects and is structured according to the star schema. This means there is a (large) fact table that contains the key figures for the InfoCube, as well as several (smaller) dimension tables which surround it. The characteristics of the InfoCube are stored in these dimensions.
An InfoCube fact table only contains key figures, in contrast to a DataStore object, whose data part can also contain characteristics. The characteristics of an InfoCube are stored in its dimensions.
The dimensions and the fact table are linked to one another using abstract identification numbers (dimension IDs) which are contained in the key part of the particular database table. As a result, the key figures of the InfoCube relate to the characteristics of the dimension. The characteristics determine the granularity (the degree of detail) at which the key figures are stored in the InfoCube.
Characteristics that logically belong together (for example, district and area belong to the regional dimension) are grouped together in a dimension. By adhering to this design criterion, dimensions are to a large extent independent of each other, and dimension tables remain small with regards to data volume. This is beneficial in terms of performance. This InfoCube structure is optimized for data analysis.
The fact table and dimension tables are both relational database tables.
Characteristics refer to the master data with their attributes and text descriptions. All InfoObjects (characteristics with their master data as well as key figures) are available for all InfoCubes, unlike dimensions, which represent the specific organizational form of characteristics in one InfoCube.
http://help.sap.com/saphelp_nw04s/helpdata/en/4c/89dc37c7f2d67ae10000009b38f889/frameset.htm
Check the threads below:
Re: about Star Schema
Differences between Star Schema and extended Star Schem
What is the difference between Fact tables F & E?
Invalid characters erros
-Vikram

If you write routine in transfer rules what will happen

If you write routine in transfer rules what will happen?

Hi,
If we write routines in Transfer Rules:
If it is Start Routine: Record Level Transformation
If it is at Rules: Field Level Transformation
In both case, the transformations are activated before the data entering into BW.
Hope this Information helps u..........
Assigning points is the way of saying THANKS in SDN
Regards
Ramakrishna Kamurthy

What will happen if I try to install XP SP1 under Boot Camp?

Hi all. I'm new to the discussion and to the Mac world.
Before I go buy XP sp2 or sp3; does anyone know what will happen (nothing will work or limited functionality) if I try to install XP SP1?
Don't want to try it if I'm going to "break" something...
thanks in advance.

Macbook_Juice:
Please do not bother to install Windows XP with Service Pack 1. It will not work and the installation will more than likely not finish. Save yourself the headache and get the right copy of Windows which work with Boot Camp.
Axel F.

What will happen when I lock a view?

When I lock a view using lock table* statement, what will happen?*
Is the view get locked?
Or all the base tables are locked from which view is created?
Or no lock is applied?
:D

OrionNet wrote:
Sohil,
Exact what lock statement you are using.
If following statement used, then you will able to query (select) both the table and view.
??? Oracle table lock never keeps other users from querying a table, and a query never acquires a table lock. So I am not sure what were you trying to say. Anyway, locking a view locks all base tables:
SQL> create or replace
2 view emp_dept_vw
3 as
4 select ename,dname
5 from emp e,dept d
6 where d.deptno = e.deptno;
View created.
SQL> select object_name
2 from user_objects
3 where object_id in(select id1 from v$lock where sid=(select sid from v$mystat where rownum=1))
4 /
no rows selected
SQL> lock table emp_dept_vw in share update mode;
Table(s) Locked.
SQL> select object_name
2 from user_objects
3 where object_id in(select id1 from v$lock where sid=(select sid from v$mystat where rownum=1))
4 /
OBJECT_NAME
DEPT
EMP
SQL> SY.

What will happen

Hi all,
There are some scenarios what will happen --
{1} If I am taking backup in archive log and doing restore,recovery in noarchive log.
{2} If I am taking backup in noarchive log and doing restore,recovery in archive log.
Then what can be the possible problems in future.(i.e. what is the difference)
I am working on Oracle 10g Release2.
Thanks
Awanish.

Ehhh?! Very strange question and backup-restore-implementation!
How do you execute a restore is not a problem. The real question should be "what happens if I am running the database in ARCHIVELOG/NOARCHIVELOG mode in case of crash and a restore is needed?"
If you run the database in archivelog mode you are able to restore to a point-in-time and you can run hot backups. In the case you run the database in noarchivelog mode you must take cold backups and you are not able to execute a point-in-time recovery because you have no archivelogs.
In both your question you can restore but after you switch the archive mode you are subjected to the above mentioned situation.
Bye, Aron

Clean install of ML - what will happen?

I have made a bootable USB drive with Mountain Lion installer.
I am prepared to make a clean install of ML on my drive (since it has become slow and glitchy).
I have a clone of my Mac drive, and have made a dmg of my windows drive and put them both on a bootable external hard drive.
Now I am ready to proceed in formatting my mac drive but I have to questions (which no one after hours of googling seem to be able to answer):
Two questions.
1. What will happen to my Boot camp partition after a clean install of Mac OS X? Will I still be able to boot windows normally?
2. What happens to programs that requires license to install, for example Office 2011, Photoshop CS5 etc? Will they allow me to restore it from TimeMachine backup or my clone or do I need new licenses?
From what I've read so far... The least problems is if I keep my username exactly as it is, manually copying files and folders from the clone drive to the new installation of ML. Downloading fresh programs from the internet. But still, the licensed ones will have files spread all over and can't easily be copied right? And also, will my computer be able to instantly recognize the boot camp partition and load it normally?

Your question 1.
Do not manually copy any files... particularly applications. There is so much that has to be moved over, it is impossible to know where these files are. When you reinstall the OS you will be asked if you want to transfer stuff over. Take that route, and save yourself an impossible task.
The good news is that when you do it that way the license info should also be transferred. In any case you do not need NEW licenses. At worst you will have to do a one-time re-enter of the ones you have.
Your question 2.
I believe, but let's hope some one more knowledgeable than I will confirm, the Bootcamp partition does not have to be erased during a clean install.

What will happen if we try to flow saved entries in SMQ3 to CRM?

Hi,
We are working on CRM 4.0 system.
While monitoring queue failure what we normally do is, we save the queue entries in SMQ3. So other queue entries will flow to CRM from R/3.
Now we want to know what will happen in following scenario:
We have created sales order 0010203 in R/3 while doing replication it is showing some error SYSFAIL. What we have done is we have saved that perticular queue entry(LUW) in SMQ3. So that other queue entries can flow to CRM.
After doing analysis using SMW01 we have found that there is some configuration miss in CRM which cause the problem so I have changed sales order 0010203 in R/3 to avoid that error.
Now since I have changed my order it flows to CRM with out any error.
so my sales order now present in CRM.
Question:
Now we have completed the configuration misses in CRM.
Now if I try to activate the saved LUW entry in SMQ3 and try to flow the queue entries what will happen?
My sales order in CRM will have latest information as of R/3 or the information in Bdoc which I have saved in SMQ3 will overwrite the latest information.
Please help.
Regards,
Dhanraj Dange

Macbook_Juice:
Please do not bother to install Windows XP with Service Pack 1. It will not work and the installation will more than likely not finish. Save yourself the headache and get the right copy of Windows which work with Boot Camp.
Axel F.

What will happen to my purchased movies/TV shows if iTunes removed them from the store?

I'm honestly sorry to bother you. I tried to google this and cloudn't find a good answer.
What will happen to my purchased movies/TV shows (that I haven't downloaded on my devices) if iTunes removed them from the store? Will I still be able to watch/download them from iCloud?
I'm trying to buy all my favourite movies and TV shows without downloading them, to keep them in iCloud that I can access from all my devices whenever I want, but I'm scared that iTunes will remove them from my iCloud if something happens to the contract between them and the production company. Should I worry about that?
Thank you for taking the time to read this. I appreciate it.
Best,
Faisal

Thank you for taking the time to explain this.
But the thing is, I don't want to download ANYTHING because I don't have storage. That's why I want to buy them and watch them through iCloud (on my Mac iTunes) without downloading.
I know that it's safer to download them. But does "safer" mean that iTunes might not let me access my purchases through iCloud?

What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Similar Messages

Maybe you are looking for