What will happen if shutdown server via console

Hi,
If shut down weblogic instance via Console, does the server wait for
existing transactions being finished? or exit anyway in the middle of
processing? Does the application get a signal etc.?
Is there other ways to monitor and shutdown server besides console?
Thanks,
William

Hello
You may try the following in the below sequence -
1) after receiver is restarted, in transaction SM50 and SM37 look for any hung job both in Control and receiver system, if anything is there cancel and delete the same. Also update DB statistics both in control and receiver system. Then restart data transfer activity in the TDMS package.
2) If step 1 doesnt work then raise an OSS message so that SAP TDMS experts can guide you in an optimum way on whether to restart a new package or to solve the issue in current package.
Most probably you may not need to start a fresh package.

Similar Messages

What will happen to sap console screen if connection to SAP is broken

Hi All,
I have a doubt.
What will happen to sap RF console transactions run on Hand held guns. when the connection to SAP appliaction serevr is broken.
Does SAP has any recovery method. (I have seen recovery method for two step confirmations) is there some other means of checking the connection and recovery of data .
Will the RF queue management take care of it.
Thanks in Advance.
Regards,
Sathanbabu Mathan Kumar

hii
If the connection to the SAP Application Server will be broken while in-between atransaction the data will be lost
regards

What will happen to the data block after data offloading?

HI All,
Since offloading can filter out the necessary information such as unnecessary columns and rows before they are passed to the database, I want to know what will happen to the data block? Will some new blocks be built at this time,which only contains the useful information?
Best regards,
Leon

Andy Klock wrote:
The statement seems to imply that Exadata has the ability to strip out columns from a block, but a block is a block is a block. Offloading is remarkable at filtering out data in the storage layer that ultimately is not needed but if you only need one row in a block that has 100 rows in it, you still get the whole block (and all 100 rows) to be processed by Oracle. The columns portion of the statement is when HCC is used for a table allowing only the blocks containing the column data required for the query, and thus if a block has 1000 column values in it, it will pass all 1000 column values to the instance to be processed.These assertions are incorrect.
Blocks sent to the database grid as a result of a Smart Scan contain only the necessary columns and rows for the db grid to do its processing (after filter restrictions and projection restrictions are applied). These Smart Scan blocks are created at run time by the storage server so they have no bearing on the blocks that reside physically on disk which is why they can not be reused by other queries via the SGA and are read directly into the PGA space.
Regards,
Greg Rahn | blog | twitter | linkedin

What will happen to the stuff in my keychain after today? I don't want iCloud. Can I keep the keychain? in my system?

what will happen to the stuff in my keychain after today? I don't want iCloud. Can I keep the keychain in my system under lion? Can someone please help me?

Thank you Sig. Well I keep all my passwords in my keychain. I'm concerned I'll lose them after today. I understand that keychain will be obsolete after today. I don't want icloud either, because I don't want all my personal info on a server. I want to keep my personal information in my system. Am I making any sense? Can you make any suggestions or offer any insights around this?

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out?

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?

Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
          ▪          Server name: imap.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 993
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password
SMTP (outgoing mail server) information:
          ▪          Server name: smtp.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 587
          ▪          SMTP Authentication Required: Yes
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password

What will happen if I restore my iPhone if it hasnt let me back it up?

I tried to back-up my iPhone 3gs but a message came up saying it needed to be updated first. I updated it and now there is a message on the phone screen saying that i need to connect to itunes, however when i try this, its telling me I need to restore my iPhone first. What will happen if I restore it with no way of knowing whether its backed up or not.
Thank you
Panicking!!!!!

Download iTunes into your computer/laptop. Upon iTunes completion, connect your iPhone 3Gs to your computer via USB port. Wait for a minute or 2. iTunes would automatically backup your iPhone without you doing anything. Make sure you're connected to WIFI.
Good luck

What will happen when I install Leopard?

So when leopard comes out in a few weeks and I install it, what will happen to all the files and apps on my computer. Will they be gone? Will I have to redo everything?
This is my first transition on a new OS X. I switched right aftr Tiger came out. What is going to happen?

Fair comment!
If you want the full nine yards:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

Migration Planning: What will happen with clients when changing namespace?

Hello,
We are planning to upgrade our EX2010 enviroment to EX2013.
Sadly our namespace in EX2010 is right now owa2.domain.com. The name owa2 is coming from last migration between ex2003 and ex2010. I'd like to remove this minor flaw if possible.
But what will happen with all the clients and mobile devices which are right now bound to owa2.domain.com? Is it possible to change the name back to owa.domain.com without manual interaction with the clients?
Kind Regards

Hi ,
Based on my knowledge for services like pop,imap and active sync we need to have the manual interaction.Without manual intercation we cannot achieve this.
Same time we need to have the new name on the SAN certificate .
For owa users you can simply communicate the new url via email and then for internal outlook and external outlook connectivity we need to repair the profiles to force the autodiscover service to fetch up the new name.On my experience most of the times repair
will not help.So again your only hope would be reconfiguring the existing profiles.
Note : Most importantly before renaming the host A record on the external and internal dns all you need is to reduce the TTL value for the existing host A record on the name owa2.domain.com.So
that external and internal clients will not have the dns cache for a long period.
Anyhow we will wait for some expert inputs on this case.Because their ideas might be good and different than me.
Thanks & Regards S.Nithyanandham

What will happen to ongoing transaction in RAC if the node fails?

In my RAC setup with three nodes .....if there are few transactions going on one node and the same node fails what will happen to those ongoing transactions........i mean will they be rollback....or what?????????
Thanx in advance
Gagan

this is an sqlplus feature. If you do not useSQLPLUS, but something like toad or any other client,
it will not work.
But, it gonna work with middleware softwares.well, if sqlplus could do it, another software could do the same. The trick is, you must reexecute the same select and be sure to get the rows in the same order !!!
If you do a fetch, this is ok, there is well a "select cursor" failover, but for a "bulk select", you should restart your query.
>
well, the transaction will be rollback and you willlose contact if you use sqlplus
Not necessarly, if you configured load balance, then,
you wont loose the connection.Will not you? I must try it one day, I just removed RAC from my notebook last week because of the lack of disk space...
>
the select actually reexecutes on the other node insqlplus, but you only "see" the lines comming after
the current ones (but the whole select is
reexecuted)
Exactly, but, user wont realizes this.apart from the time he will have to wait, which can be quite long if the query already returned 90% of the rows...
>
Go through the link which I have provided in my
earlier reply for more understanding on type of
failover and load balance.well, quite unclear actually :
Therefore, with Transparent Application Failover, a client notices no connection loss as long as one instance remains active to serve the application... there is no "connection loss", which does not mean there is no "loss" !
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96580/advcfg.htm
Active Transactions
Any active transactions are rolled back at the time of failure because TAF cannot preserve active transactions after failover. The application instead receives an error message until a ROLLBACK is submitted.
which means, your application must manually resent the transaction or whatever is appropriate

Gateway restart : What will happen ??

Hello,
I just wanted to know what will happen if i restart the gateway for one of the application server.
(I know, it can be done by SMGW and it starts automatically in few seconds. I am interested in knowing side-effects for this.. eg. running transaction will get disconnected and dumped or it will also reconnect ?.. something more.)
My problem is.. on 1 app server, all workprocess goes in CPIC stopped state and status remain waiting for gateway.
thanks
ashish

I have done it in the past, and it worked. But if you have heavy system load (especially RFC), then you have a good chance to kill something. You will also disconnect any server program registered to that gateway, so the connection will have to be reestablished. Under some circumstances it is possible that the gateway won't restart at all.
It is always better to restart the whole SAP instance if anyhow possible. If you have never tried it, then always try on a test system first. Why do you want to restart your gateway at all? You should check dev_rd, dev_disp and dev_wX for error messages.
Cheers Michael
Edited by: mho on Jan 6, 2011 8:30 AM

TS1538 Can I reset my iPod nano? What will happen after I reset it?

Hello there,
I don't know if I can reset my iPod nano. If I do this, what will happen to it? Will I lost all my songs? I don't know why iTunes not recognized my ipod, which I have IPod in to my MacPro Retina OXS 10.9.1? I hope anyone can answer my questions...

What do you mean by a reset? If you mean depressing the buttons until the Apple icon appear then no. How you resetdepends upon the model Nano.
If you mean restore via iTunes, that erases the iPod.
If you need more help post in the iPod Nano forum. This is the iPod touch forum

What will happen after this?

I have a procedure kicked off yesterday to update a table. But I killed it this morning. Just after I killed the session, I kicked off another SQL to perform the same task to update the same table and same columns but faster.
What is happening right now is: the Oracle is performing a roll back on the killed procedure while the new SQL is running.
So here are my questions:
1. what will happen later when the SQL is completed and the roll back is not done yet?
2. Will the roll back affect the new SQL updates?
Thanks,
Edited by: user644467 on Mar 11, 2011 9:37 AM

Dive into the concepts manual. A basic concept of Oracle [url http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/consist.htm#CNCPT020]concurrency and consistency is that each (something) gets a view of the database at the start of the (something). (something) is usually a transaction or statement, depending on configuration and programming. Oracle uses System Change Numbers to figure out if each view should include any particular version of block data, kind of like a clock.
So basically, it all works, but you may see performance impacts just because stuff is happening, and you may see odd effects if you don't understand what you are doing. It is different than other database engines.

If a new apple id sign in.what will happen to the old apple id if you erase or reset the phone?

I buy a new iphone 5s and the store open it and put his apple id to download some stuff.. And after that i try to make my own apple id. What will happen if i erase all data and it is in need of apple id.. Will it be the old apple id or my apple id?? I heard that if i erase all data. The apple id of which i buy my iphone will appear and mine will not??

If the store setup the phone with an Apple ID/Password, that is not yours, & turned on Find My Phone, then you will need that Apple ID/Password to re-activate the phone. Called Activation Lock. Read here:
http://support.apple.com/kb/PH13695
So, go back to the store where you got this phone & have them fix things.

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?

I'm worried about what will happen if I delete my recent backup data from the phone I still own? Will I lose any progress in games that was saved in the backup?
I have an iPhone 4S and I keep getting those irritating notifications that tell me I need to upgrade my storage or free up space. I've deleted all I can from my music and photos without losing too many precious memories, but it's come to the point where I think I need to delete backups. However, I'm just worried that I will lose all and any log-in information that I don't remember and app/game progress that was saved to the iCloud. Please Tell me what will happen/what I can do?

If you are asking what happens when you delete an iCloud backup, it only deletes the backup from your account. It won't do anything to the data on your phone or in your iCloud account. If you don't need to backup you can delete it. (If you no longer want to back up your phone to iCloud, turn iCloud backup off in Settings>iCloud>Backup. Then your phone will back up to your computer each time you sync it with iTunes.)

What will happen if i delete my icloud account from my macbook?

I have both an iPhone 4s and and a macbook pro, they are both signed in on the same icloud account, which my dad's phone is also signed in to. if i delete my icloud account from my macbook what will happen? i have already deleted it from my iphone and everything was still there, what with my mac?

You just need to sign out on the Mac, everything will be on iCloud but no longer on the Mac.
System Preferences>iCloud>Sign Out

What will happen if shutdown server via console

Similar Messages

Maybe you are looking for