Whats going on with BC?

Hi,
I'm a web developer and we build all our non-ecommerce sites in the BC system, however since Friday we have noticed some very odd things happening with the system.
We make changes to pages, templates, content holders, stylesheets etc. both within the Admin section and also using Dreamweaver and these changes seem to save correctly, however the changes are not then reflected on the actual pages. The weirdest thing about it is that the changes sometimes do appear and sometimes don't if you keep hitting refresh. It seems like it's some sort of caching issue?
Either way, whatever it is I've contacted support numerous times with no luck and nothing seems to have been resolved.
Has anyone else noticed this?

Just been looking through recent changes and it looks a lot like this might be causing the problem:
HTTP acceleration – all sites static assets are served from a new cache engine (images, CSS and JavaScript files, together with improved headers that should allow the browser to cache them better for a browsing session). This update has been turned on along with our April release, and has made all the BC sites load faster on first and on subsequent loads.
Surely Web Developers don't have to clear their session every time they want to test changes?

Similar Messages

  • Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

    Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Whats going on with Sherlock?

    Seems like none of the Sherlock channels are working. Whats going on with this app?

    Hi Cacker,
    Yes, myself I had to trash Sherlock's Caches every two hours or so in order to make it work with Mac OS X 10.4.2.
    —> Now since I updated to 10.4.3, it works like a charm.
    I don't know if it is because of the update itself, or because I
    - cleaned all Caches, including System Caches,
    - ran the three Periodic tasks, and performed a
    - disk repair with Disk Utility and a
    - directory repair with DiskWarrior,
    right before the update.
    Anyway, make the OS Update the way I did it (Software Update, menu option "Install & Keep Package"), with the precautions above, and see if your Sherlock then works as perfectly well as mine afterwards?
    Good luck!
    Axl

  • WhaTS going on with my hyper editor

    OK, so all of a sudden, when I create a GM set in my hyper editor the tags are wrong, for example where it says Kick 1 the sample I get is like a bongo or something, I've used the hyper edit with this instrument (the Garage band Rock Kit) like a hundred times and this has never happed before, whats going on?

    Welcome to the Apple Support Communities
    They replaced the logic board but not the memory. Take the Mac to an Apple Store to replace your memory or buy the memory and install it yourself

  • Somebody must know whats going on with PAL 720p HVX support !

    Ok this is getting really really anoying !
    Why has apple not mentioned anything about supporting PAL 720p in FCP ?
    Just a simple where on the case would be nice but no, nothing.
    I hate this kind of attitude and it severly hurts my investment in this camera and format.
    Why was it so easy to provide ntsc support but us pal owners are left feeling ignored.
    Just freeking tell us whats going on ............. aaaaaaaarghhh
    -matt
    G5 Dual 2.3 Power Mac 4 GiG RAM   Mac OS X (10.4.5)  

    720p25 is no officially supported format in general.
    Only 720p50 is a real standard. However there is a
    so called 2:2 pulldown where you double the frames,
    also called 25p over 50p. This only concerns a
    transparent video signal via HD-SDI. Speaking about
    the Panasonic HVX200 is another story as this is a
    file based workflow.
    Here you can find an article how to capture, edit and
    monitor 720p50 in FCP 5.1:
    http://www.aulich-adamski.de/en/perm/720p50-capturing-editing-in-final-cut-pro
    This is also helpful for JVC GY-HD users that could use
    an HDV to HD-SDI converter.
    An second article describes the Panasonic P2 workflow
    with 720p25 and 72p50 but it's currently only in german:
    http://www.aulich-adamski.de/perm/panasonic-ag-hvx200-720p2550-p2-workflow-mit-f inal-cut-pro

  • Whats GOING ON with Pubcenter!? ALL TIME LOW Revenue and Fill rate!

    Whats going on here? Since 3 weeks the revenue has has not picked up one bit!
    I got the same number of impressions last month but the revenue was X3 more! :'(
    WHAT IS GOING ON? Support has there is "no demand" due to season. What does that mean?
    Why doesnt Pubcenter show Ads from other category of there is "no demand" in the currently configured Ad Categories (mine is all games)
    I only have a Windows 8 app, can someone suggest an alternative please? At this rate I wont last long in this profession :'(

    It' only USB that can be hot plugged ie connected & disconnected while the power is on.
    Plugging in any PS2 device while pc is on can have dire results.
    Try resetting your cmos.

  • Whats going on with my ipod nano any 1 plzz help me

    does any 1 know y when i install itunes on to my pc(i have windows xp) my logo of my dvd rom drive disapears and i cant play any dvds or music cds or install any software its like the itunes and ipod software is stoping it from working plzzz help i donnt know whats going on

    It wasn't designed to do it.

  • Whats going on with Itunes?

    What is going on?...the last two weeks or so Itunes has become the most unstable piece of crap. Freezing and Freezing...over and over again...wont sync Ipods that is has days before...loading s l o w l y...god whats with this?
    Message was edited by: Steve Amendola

    I have reinstalled over and over again. I have quit all other programs that were running and turned off Virus Software. Using the latest version of the program. New Ipod nano wont sync. Old Ipod shuffle wont sync. Program freezes constantly even when trying to just select a menu. Downloads start and stop. Ect Ect. Basicly program at this point is not usable. I see from other posts that this is happening to a lot of others.
    This is only recent. No problems ever before.
    Here are my specs.
    Intel Q9550
    Asus P5EVM-HDMI
    Gigabyte 1gb 460 Vid Card.
    8 gb Corsair ddr2/800 ram
    Intel SSD 160GB, W7 64 bit
    WD internal hdd. 1TB drive for storage
    WD 2TB "mybook" networked external drive.
    Antec P182 case.Antec 850 PS. Apple 30 inch
    Message was edited by: Steve Amendola
    Message was edited by: Steve Amendola
    Message was edited by: Steve Amendola

  • A black eliptical shape panel appeared on my screen while I was cleaning the keyboard.  its got info on whats going on with the computer.  i want to get rid of it.

    a black eliptical panel with a white line around it appeared on my screen.  it has words in it describing what the compute is doing.  i would like to get rid of it.

    Press the key combination command-F5 to deactivate VoiceOver. If that doesn't work, proceed as follows.
    For OS X 10.7: From the menu bar, select
     ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off
    For OS X 10.8: Select
     ▹ System Preferences ▹ Accessibility ▹ VoiceOver ▹ Enable VoiceOver: Off

  • Sure it's been asked already.... But whats going on with 3.1?

    iPhone 3.1 (7C144) has made me hate my iPhone. The battery life seems okay, but I can't tell what it is unless I restart the phone. It'll just display whatever it started at when i turned it on. Even the battery app I have shows the same thing. This wouldn't be so bad if it weren't for the phone or texting not working. I can not make or receive texts on what seems to be a very random basis. I try to make a call, and the phone just sits there saying "calling iPhone...", but does nothing. With sending text messages, it runs through about 90% then just sits there until it gives up. I have to restart my phone for the phone functions to work. This started happening to me a few days after updating. The instore helper people told me to restore my phone. all that did was get rid of my high scores in games, and messed up the order of my apps. My girlfriends phone does the same thing now too. We bought our phones at the same time from the same store, from the same salesperson. Why will apple not fix this?

    More than likely Apple is working on a fix. The problem is everyone who has installed firmware update 3.1 is not experiencing the same. I'm not, and I doubt I'm the only one who isn't or in the minority. As with any bug, the cause must be identified, code written to fix the problem, and then tested before the final release. Difficult to deal with for those experiencing this problem, but it wouldn't be a good idea to provide a bug fix to fix a problem experienced by some that causes a problem for others who haven't experienced the same.
    If you get a notice with iTunes to send a report to Apple as the first step during the sync process, you should do so. This will help Apple to identify the source of the problem and to correct it with a firmware update.

  • Whats going on with my internet speed?

    So after checking when my area might get fibre I decided to check what my speeds are now. So we have the 17mb package I believe although BT says we should be getting about 19mb. So went on to speedtest.net, and I got this
    Now we have been using this packages for years I know I have had way higher then this, hell last time I checked this speedtest website I was getting 19Mbps+ and I have downloaded games from steam at like 2-2.2MB/s which right now is at about 580KB/s. Any ideas?

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I have three displays - whats going on with the resolution?

    Ok so I have a 24 inch iMac, a 22 inch samsung monitor and an epson projector.
    I bought a VGA switcher, plugged the VGA source from my iMac into it then output to my monitor and my projector, I can switch outputs with a button to either the monitor or the projector.
    However, when setting up the resolutions, it will detect my monitor as "VGA display" and only gives my resolution options for the projector. If I just connect it straight to the monitor I can go to 1680 x 1050 on it, but if my projector is also connected to the vga switcher even though it isn't in use I have to select one of the resolutions that it supports.
    Very annoying because it doesn't have 1680x1050 as an option, I have to choose 1600x 1200 which is stretched. Doesn't seem to matter which plugs the two are in it will always default to the projector. Anyone know why? and what i can do to solve it?
    Thanks

    thanks for the reply, I tried that but I get the same results. I fact I just restarted my iMac without the projector attached so all I had was vga from imac into vga splitter, vga from splitter into my monitor.
    When I choose detect displays it picks up the monitor and calls it VGA display and has loads of resolution options but not 1680 x 1050 which is the one i want.
    Is it possible that the splitter is at fault and that it doesn't support 1680 x 1050? it will let me have 1600 x 1200 and loads in between up to 2304 x 1728. Do different vga switches support different resolutions?
    Oddly, if i go straight from imac to monitor and detect displays it sees it as a syncmaster, and works, then if i plug into the vga splitter and monitor it continues to work, its just when i next restart it switches back to the wrong one.

  • Whats Going on with N80 Then?

    After all the hype about April Launch and support pages posted on Nokias website, there is no sign of this phone being available.
    Can anyone advise what is the problem with this phone? Why has it been put back another 2 weeks?
    Gary

    N80 is already available both in Finland and Sweden so I guess it´s just a matter of days before you get it over there ;-)
    The views I present are my OWN and not of any organisation I may belong too.

  • [GeForce 6] What goes wrong with my card ?

    Hi everybody !
    First of all, English isn't my mother language, so be indulgent with me.
    I have a MSI NX600GT VTD128 and I've got a big problem with it. Each time the temperature of the GPU reaches 69-70°C, the system freezes (reset inevitable to restart). On the other hand, everything is fine under that critical T°.
    Configuration :
    AMD Athlon 64 3000+
    Asus K8V SE Deluxe rev 2.0
    512 MB DDR PC3200 Infineon
    Seagate 7200.7 160 GB SATA
    MSI NX6600GT-VTD128 (AGP8x)
    Yusmart 178MP TFT 17'
    Pioneer DVR-108
    Antec Plusview 1000 AMG
    Antec TruePower 380W
    Logitech Media Keyboard
    Intellimouse Optical
    Win XP Pro
    Mandrake 10.1
    Have you any idea that could help me ? 
    THX !

    Quote from: xowainx on 15-July-05, 03:31:55
    I have a similar problem with my card im not sure what the temp is when it restarts but its not above any threshold. When does it restart, all the time or only when you are using graphic intense programs such as games? Mine only restarts when I use graphic intense games like Battlefield 2 or Guild Wars, Maybe try some of the things suggested on 2 of my posts,
    https://forum-en.msi.com/index.php?topic=83438.0
    https://forum-en.msi.com/index.php?topic=83433.0
    Not very good using forums never done it before very often. But here are the page links. I dont know how to make them clickable so you will have to cut and paste.
    Maybe you will have more luck them myself in fixing this error.
    Thanks for replying !
    I'll have a look at your links ...
    About the freeze, it occurs systematically when the GPU reaches 69-70°C (whatever the program I use).

  • I have windows 7 and my firefox client will not open, but it shows in task manager with 108k memory. Whats going on with my firefox?

    As stated on the question I have windows 7 and meet all the requirements. But when i launch firefox It wont start, but it shows in task manager with 108k memory.

    Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
    Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
    http://www.filehippo.com/download_firefox/7345/

  • Any clue whats going on with time machine?

    Of course I found all kinds of info about not to use seagate for time machine AFTER I bought the NAs110 blackArmor, but since I now own it, I need to try and use it.  Time machine seems to work fine with the device as long as the computer is active. If the machine is in sleep mode or idle, it can't access the drive without a logon error. It will regularly error out saying it couldn't log on and therefore couldn't perform the back up. But as I use my iMac, it has no problems. I don't let the machine log off when not in use, I just let the display go to sleep. Does this make any sense to anyone?

    Haven't heard of that problem with that NAS (or any other), but that's one of the downsides to using a 3rd-party NAS with Time Machine.  The interfact between the NAS software and OSX may be tenuous.
    I'd suggest searching here and/or via Google for references to that NAS, and perhaps contact the maker.

Maybe you are looking for