When exporting, the footage in the Input and output monitor is not showing up.

I use Premiere Pro CS4.
When I export my project and I choose the formats and options, they all work fine and it will export fine, but my footage does not show up in the input or output source montior.
Thanks for your time

See:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=547004 Bug 547004] – Implement <input type="color">
''(please do not comment in bug reports; you can vote instead)''
* https://developer.mozilla.org/en/HTML/element/input

Similar Messages

  • Input and output varaiables are not shown

    Hi,
    I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are greyed out. I am not sure whether am missing any configuration. Please let me know if anyone have workaround for this issue.
    Thanks,
    Sivakami - SEMC SAP team

    That is interesting.  The first (AES) is producing a 128-bit key, the second (aes) is producing a 256-bit key.
    Producing a 256-bit key should not be possibe without the JCE/JCA Unlimted strength policy files installed, I have those files, installed, do you?
    If someone who doesn;t have ththe policy files installed tried it, what do they get?
    I would suspect that the case-sensitive nature of the underlying JVM is causing it to choose a different Crypto Provider when you use aes than when you use AES. The JVM that ColdFusion ships with (and the standard JVM) have severa crypto providers to choose from, plus ColdFusion Enterprise and Developer addition also include the BSafe Crypto-J provider), I think there are 10-11 total.
    I would log a bug for this.
    FYI, you can control this by using the optional keylength argument in generateSecretKey()
    These two statements will produde keys with the same length.
    #arrayLen(binarydecode(generateSecretKey("AES", 128),"base64") )#
    #arrayLen(binarydecode(generateSecretKey("aes", 128),"base64") )#

  • I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match.  How do I correct this?

    I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match.  How do I fix this?

    I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.          

  • Input and Output encoding do not match

    My input xml file's encoding is "ISO-8859-1".After manipulating the contents using DOM and transforming , the encoding of the Output xml file is changed to "UTF-8".
    Here is the source code:
    public static void main(String args[])
    try {
    InputStream xml_utf = new FileInputStream("C:\\backup\\07_23\\input_1.xml");
    InputSource inputSource = new InputSource(xml_utf);
    DOMParser parser = new DOMParser();
    try {
    parser.parse(inputSource);
    } catch (SAXException e) {
    e.printStackTrace();
    } catch (IOException e) {
    e.printStackTrace();
    Document doc = parser.getDocument();
    Source source = new DOMSource(doc);
    Result result = new StreamResult(new FileWriter("C:\\backup\\07_23\\output_1_input2.xml"));
    Transformer xformer = null;
    try {
    xformer = TransformerFactory.newInstance().newTransformer();
    xformer.transform(source, result);
    } catch (TransformerConfigurationException e) {
    e.printStackTrace();
    catch (TransformerException e) {
    e.printStackTrace();
    How can I set the encoding of the output back to "ISO-8859-1"?
    Thanks.

    transformer.setOutputProperty("encoding","ISO-8859-1")
    did the job...

  • The sample rates of the audio input and output devices do not match.

    I am trying to record line-in audio and keep getting this error.  have a realtek sound card.  I have tried everything I know but cannot record.  please help if you can, thanks.

    Setting the Sample Rate in Windows Vista and 7

  • How to control (the input and output) EXE file after I call it using exec?

    Hi,
    I knew that I can use runtime.exec() to call one EXE file, and this works. But this EXE has two characteristics:
    1. After this exe starts, it asks user to input number such as 1 or 2 onto computer screen, then press return. Then the exe will start the calculation.
    2. after it starts calculation, it prints 3 columns of numbers onto the screen.
    My two questions are:
    1. How to use java to input the number such as 1 or 2 automatically? this EXE can not work like this in DOS command line:
    C:> file.exe parameter
    The parameter is the number such as 1 or 2 that I wanna input.
    2. how to redirect the 3 columns of numbers from computer screen to txt file?
    My colleague can solve these two questions using Mathematica. So I know that definitely there is at least one solution for it. I just can not do it using Java. This wierd exe file bothered me a lot and I really wish that I can get help from someone in java community.
    Thank you!
    Tony

    When you call Runtime.exec, you get a Process object. (I presume something similar happens when you use ProcessBuilder.) Process has methods with names getOutput, getInput, and getError. These correspond to the standard input, standard output, and standard error streams of the spawned process.
    You can read and write to the process on the streams corresponding to input and output that the process writes to the console.
    [add]
    In fact, you should be grabbing and reading the output/error streams anyway, because of the points raised by the Traps article. Google "Java Runtime exec traps" and you'll probably get a link to this JavaWorld article, which describes common Runtime.exec problems and how to solve them.
    Edited by: paulcw on Jun 15, 2010 4:09 PM

  • Audio input and output at the same time

    Hello mac users.
    I have one simple question: since the new macbook has one single audio port for both input and output, how could I, for example, play my guitar AND listen to the headphones at the same time?
    I KNOW (because I've tried) that with the iPhone headphones with microphone the port CAN physically work at the same time for input and output, so the question is: what can I use to do that? Will a simple splitter do or do I have to use different tricks?
    (I know there is a thread on this already, but it doesn't provide a definitive answer)
    Thank you!

    One of the first questions to ask...
    Is the audio input stereo or mono?
    When using a headset mic you're dealing with a mono input so you at least know the Mac is capable of that.
    If it's mono, and I suspect it is, should be easy to either make or purchase a custom cable that has two female input connectors, one mono input and a stereo headphone input.
    However, I'd probably just purchase a USB audio interface, the sound, both recording and playback will be head and shoulders above the Macbooks built in internal audio.
    pancenter-

  • I have on;y one audio port can i use it for input and output at the same time?

    i have the new macbook pro 13 in and i want to connect aguitar as input and output on an amp but i have only one audio port

    You can't use the jack as an input and output simultaneously. The solution is to look for a USB or Firewire interface to get your guitar sound into the computer.

  • Multiple inputs and outputs using DAQmx VIs

    Hello,
    I am fairly new with the LabView programming language.  I have a few training books that I have been reading, and I have been following online tutorials and reading the forums.  However, I have come to a problem where I don’t see a clear solution.  I am using LabView 2009 (9.0f3) and DAQmx VIs.
    I am using a NI 9172 chassis PLC, with two 9201 AI cards, 9217 AI RTD card, 9472 DO card, 9263 AO card, and two 9237 AI Bridge cards.
    I am reading eight analog inputs with the 9201 cards, two analog RTD inputs with the 9217 card, three digital outputs with the 9472 card, three analog outputs with the 9263, and eight analog inputs with the 9237 cards.
    I wrote a simple program to test one digital output task, two of the analog output tasks, and a single analog input task.  I put all of them in the same while loop, and it worked perfectly.  However, when I add analog input tasks to the same loop, I get an error 200022.    So I tested each sensor individually by changing the channel before each run.  I searched error 200022 and found that this is because I cannot start another analog input task until the previous one ends.  With this said, I don’t know how to acquire an analog voltage in the same task as an analog RTD voltage.  Both inputs take different constants in the start task DAQmx icon.
    Attached is my test program.  It is titled “Test All”. This is the program I used to test the various sensors.  I tested the input sensors one at a time, and it worked fine.  A few tasks are written just to test functionality, and will be added to later.  The data is only displayed on the screen.  I will add triggers and data write to disk functions later.  This program works now, but if I add more analog inputs, it will generate the 200022 error.
    Can someone show me how to correctly write the code for multiple inputs and outputs using DAQmx?  All training materials and tutorials I can find all show a single input or single output, not multiples of each.  Thanks for looking.
    -Randy
    Attachments:
    TestAll-NI.vi ‏32 KB

    Hi RandyC,
    The Knowledge Base article Using Different Types of DAQmx Global Channels in the Same Task goes into a little more depth of what Bryan is talking about, and it also includes some example code to help show what to do.
    Hope that helps,

  • Built-in audio inputs and output don't respond to anything.

    Hi there,
    Maybe somebody can help me, I have a macbook pro os x 10.8, and i'm having a bit of problem.
    I connected a cable to the line input, and before i had a chance to balance the high volume the whole software in the system preference froze, and now the built-in audio inputs and output don't respond to anything, also in the audio MIDI setup menu. The volume button moves extremely slow, and there is no sound at all. Anybody has any idea?
    Thanks in advance

    Apple store genius bar seems like you best bet.
    Ciao.

  • Just bought a new laptop, windows vista and it say gateway and my ipod touch not showing up

    I just bought a new laptop, Windows vista to be exact, i downloaded the latest version of itunes and my ipod is not showing up ? Anyone can help me

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!

    I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!

    Exactly WHAT did you import?
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file).  I'm on OS 10.5.8.  Never had a problem with this before.  What am I missing? Any idea

    I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file).  I'm on OS 10.5.8.  Never had a problem with this before.  What am I missing? Any ideas?

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

  • When you set up tracks what is best to pick for the input and output?

    When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

    First part of the question I don't understand, so could you elaborate please?
    Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

Maybe you are looking for