When I restart my iMac it is stuck in the grey screen with spinning circle

When I restart my imac (less than 1 year old) it won't start up.  I get the grey screen and spinning circle and it never moves beyond.  A few times in the past, I've tried to reset the PRAM and that has worked.  However, its not working this time.  Nothing seems to restart the computer. 

Hi,
The Recovery HD I believe is the Internet Recovery feature found in most 2010 and 2011 Macs. Another poster in this topic suggested taking a look at an Apple support article regarding this issue. A solution may be found there that may work for you. If all else fails, I'd recommend you contact AppleCare. Unless you are within 90 days of your purchase (which isn't the case for you) you'll either need to have the AppleCare Protection Plan to call AppleCare over the phone, otherwise I'd suggest taking your iMac to an Apple Retail Store. Could be inconvenient doing that, though, considering the iMac is not exactly portable. However, the Apple technician will (presumably - just guessing) do various initial hardware tests on the machine and hopefully resolve the issue for you.
By the way, the Internet Recovery feature (Recovery HD) allows you to restore Mac OS X in the event you have misplaced your installation discs, for example. The Internet Recovery feature can also be activated at boot up by pressing the Command (Cmd) key and the R key afterwards (while keeping the Cmd key pressed down).

Similar Messages

  • I updated my MacBook Pro, and now it's to fully restarting.. It's stuck on the grey screen with the loading sign at the bottom of the apple.

    How do I fix this issue???

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod

    i jailbroken my ipod and when i try to restore it, its stuck on the loading screen with a skull on it but now i cant even look at the apps or lock it plz up i tried everything pretty much. i tried putting it in dfu and dfu pwn mod
    < Edited By Host >

    Jailbreaking has its consequences and voids the Apple warranry.  We can't discuss jailbreading on this Apple forum.

  • I have an iMac G5 stuck on the gray screen with spinning gear.  I woke up to it being stuck on a blue screen, then force quit and now it's stuck on gray with spinning gear.

    I have an iMac G5 stuck on the gray screen with spinning gear.  I woke up to it being stuck on a blue screen, then force quit and now it's stuck on gray with spinning gear.  Please advise.

    If you have a G5 then it's a PPC (Power PC) based iMac, this is an Intel iMac forum. Try the Gray screen appears during startup link for troubleshooting steps. I suspect the HD has crashed.

  • My Mac won´t load. When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

    When I turn it on, I type the password, then it starts to load, but nothing happens. It gets stuck on the grey screen with the apple logo. I can´t go to an Apple store since I´m working in Bolivia. Thanks

    RhysWills1,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

    As the title says.
    I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
    I don't want to restart it because im scared that something might go wrong.
    operating lion

    LimitLess- wrote:
    Hi,
    I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
    Thanks
    I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
    That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

  • My Imac will not move beyond the Grey Screen with the spirl spinning any ideas

    Recently I rebooted my IMac, it now will not move past the grey screen with the spinning spirl.
    Please help

    Turn off your machine, then power on whilst holding down cmd+alt+p+r until the screen goes off and you hear the chime again.
    Also, what iMac do you have/how old?

  • My late 2010 imac has been stuck on the grey screen when booting

    When i turn it on it makes the apple chime and then the logo appears and the progress bar then appears and starts moving across about a thift of the way it then stops and starts again moves to the same point then turns off

    Care to share which OS you are using?
    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
    ================
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • I think my HDD is dead - stuck at the grey screen, with the apple logo ..

    Hi all,
    I think my Mbp's HDD has partially failed. It is the original 100gig drive , which was 95% full.
    It started getting incredibly slow so I decided to reboot it. It has not been possible to boot.
    I have managed to connect the internal drive to another mac using FireWire and T on startup.
    The drive shows up and the data can be accessed albeit slowly.
    I tried to repair the drive in disk utility and it came up with a lot of " invalid node structures" and " invalid record counts".
    The disk utility seemed to not complete the process so I had to quit it.
    I can't boot from the cd , but I may be doing it wrong.
    Can anyone help me with the next thing to try?
    Thanks.

    Slow access even with Target Disk Mode (TDM) can indicate a failing drive, but it's possible that drive can be rehabilitated by continuing to off-load files and keep trying with Disk Utility. Sometimes, enough DU runs can restore sanity.
    I'd check the SMART status first (try: SMART Utility at Apple OSX Downloads ). This can be done from the other Mac while the MBP is in TDM. If the drive passes and you can off-load some of the load, then a directory repair utility like DiskWarrior might be worth a try.
    However DiskWarrior is US$100 and you can get a new 500GB SATA 2.5" hard drive for less than that. The advantage to disk Warrior is that it's easier to install in an MBP than a new hard drive.

  • Old iMac won't start up and stuck in grey screen with spinning wheel

    Hi, I have a very old imac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago.
    Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel.
    I tried many times off-on, hold down the apple function key but none worked.
    I no longer have the rebooting CD with me. I wonder whether the computer can still be saved?
    I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files.
    Thanks
    If I am not wrong, I think it's tiger or earlier that it's using.

    Do you have the Install Disc to try to boot from?
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

  • My Imac won't go past the grey screen and apple logo! How do I fix the start up in my Imac?

    I really need help with this one!
    My Imac is stuck on the grey screen with the apple Logo, and it wont go past that.
    It does listen to certain keyboard commands to start it up (ive tried fixing it by reading other's posts.) But it will only listen to some commands,
    It doesn't start on Shift (safe mode) but it does start on command+shift+(other button) which is safemode viewed so you can see whats going on.
    As the letters on the screen type on, it says it's loading something but stays stuck there.
    I've heard about a way where you can use terminal from another computer and boot it that way, or using firewire cables.
    Please help! and take in mind I'm not really tech-savy with computers, so guides would be helpful!
    If there is any way to save the files in the computer that would be great. If it can't be done, it's fine, I just want it working again .
    Thanks,
    Gian Varela

    I really need help with this one!
    My Imac is stuck on the grey screen with the apple Logo, and it wont go past that.
    It does listen to certain keyboard commands to start it up (ive tried fixing it by reading other's posts.) But it will only listen to some commands,
    It doesn't start on Shift (safe mode) but it does start on command+shift+(other button) which is safemode viewed so you can see whats going on.
    As the letters on the screen type on, it says it's loading something but stays stuck there.
    I've heard about a way where you can use terminal from another computer and boot it that way, or using firewire cables.
    Please help! and take in mind I'm not really tech-savy with computers, so guides would be helpful!
    If there is any way to save the files in the computer that would be great. If it can't be done, it's fine, I just want it working again .
    Thanks,
    Gian Varela

  • Mac Pro gets stuck on the grey screen and won't finish booting

    I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit.  I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot  (everything works o.k. there) or starting up from the software disk to perform the repairs.  I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit.  This happens every time I try it.  I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart.  Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out.  Could it be a graphics card issue?   I did notice some funky visual glitches occurring prior to the breakdown.  Any other ideas?

    I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
    Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
    And off load all your data to other drives.

  • Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

    Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel. What can I do, will I loose everything on my laptop?

    ashg23 wrote:
    Thank you, I have restarted but it is still stuck at the grey page with the spinning wheel? Any idea?
    Have you started up holding down Command + R and attempted to install again?
    Pete

  • Grey Screen and Spinning Circle When Trying to open a PDF from a website

    I tried to view a pdf from a website and a little window popped up. At the time i thought it was to save the pdf but i guess it was in fact asking me to find the adobe acrobat program. I quit out of it and now keep getting the grey screen and spinning circle when i try to download the pdf. How do I get it so i can open pdfs if find on websites? thanks!

    themercenary12 wrote:
    Found another topic and was helpful
    *Hi mercenary, Welcome (Back)* to Apple's Users Help Users Forums.
    It would be nice if you could explain or link to the helpful topic.
    Good Luck, JP

  • I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

    i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?  my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 8
    This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Maybe you are looking for