When I restarted my computer and opened my email my earthlink and gmail where not there. It showed a moblie me account which I don't have but no mail in it
My computer froze for a bit so I restarted it. When I went to open my email (I use what comes on the macbook) none of my pop accounts showed. The mailbox layout looked slightly different than it usually does as far as placement of some of the keys but it looks like it is trying to show my mail through mobile me. I don't have a moblie me account but dont know how to restor my mail to show my gmail and earthlink in it and not moblie me. Does anyone have suggestions?
The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.
Similar Messages
-
I am receiving emails on my Dell computer/Microsoft XP software that are addressed to my deceased husband. I don't have any idea as to what the hardware product serial number is. How can I delete the iCloud account?
You can't delete an iCloud account, you can only stop using it. Is email addressed to him coming to your email address or his?
-
When i restart comp 2 windows open automatically, how do i get rid of this?
when i restart comp 2 windows open automatically, how do i get rid of this?
Check your System Preferences to see what items you might have set to Startup when the computer is started.
System Preferences > Users and Groups > Select your User Name > Click on Login Items > Select any item you do not want to startup automatically > click on the Minus sign in the bottom left corner.
If the items that seem to open automatically are windows that you had open before shutting down the iMac or before selecting Restart those windows will open again when the computer starts. -
Flash quits working when I restart my computer and I have to uninstall and reinstall every time
HELP! I've been working on this for 11 hours non-stop!
I have Windows 7 64bit. I'm using the newest Firefox browser. I install Flash and it seems to sort of work. It is in my Control Panel Uninstall programs with the Flash icon.
When I restart my computer and go to the Adobe site it shows that Flash isn't working. It's still in the Control Panel Uninstall programs BUT it has no icon. So I have to uninstall it and reinstall it to use it.
When I go to any Zynga.com games and right click on the game window the Flash window opens but when I click on Settings it freezes and I have too right click and left click a lot for it to go away. So I can't allow the site to use 100% of Flash to run on the site. Once in a while if I wait a few minutes Settings will open and I set it to 100% but when I go back and look at it later it says I am using 0%.
I have Norton 360 and have turned it off and uninstalled and reinstalled repeatedly only to have the same problem occur.
Before I installed Windows 7 and had Vista Ultimate it worked better but still not as good as it should have.
Also in my Firefox plugins Shockwave is there but no Flash plugin is ever there with Flash installed or uninstalled. Should Flash be there and where did Shockwave come from? Firefox?
Do I need Shockwave for Zynga or Facebook games? Or at all for that matter. I'll install it for no good reason as long as it doesn't screw something up.
After 11 hours of this Adobe HELL I am burnt! So ANY help is greatly appreciated!
Thanks to anyone who can help me. THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Replied in your other post.
-
My iPhoto keeps opening when I restart my computer
My iphoto keeps opening up when I restart my computer. Is there anyway for me to turn this off?
Sure
Do you have any FAT strorage devices attached to it? Is so unmount them or in the iPhoto preferences set actipon when a camera is connected to do nothing
Do you have iPhpoto set to launch on start up? Is so right click on the iPhoto icon in the Dock and under options uncheck that option
Do you have iPhoto in your list of programs to launch at login in the users and groups system preferences? If so then remove it
Was iPhoto running when you shut down and do you have the option checked to restart all programs ? If so quit iPhoto before shutting down or uncheck that option
LN -
i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??
Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped! -
I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.
Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!
Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update. -
I just purchased my macbook pro yesterday and the update combined it downloads but when i restart the computer it says something went wrong and it won't work i don't know where to start to download this update
Try here:
http://support.apple.com/kb/DL1524 -
I am unable to open Safari. It was working yesterday before I installed the update. The update seemed to be automatic when I restarted my computer. I am running 10.9.5. I don't want to lose my contacts, bookmarks etc if I have to delete the app. Any suggestions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Sometimes my maps and documents on my desktop are rearranged when I restart my computer
Sometimes my maps on my desktop are rearranged on the desktop when I restart the computer. Is there A way to go back to the original display and sort order?
That is a feature. Desktop folder acts as a holder folder.
When trouble shooting we move files to Desktop to keep the contents of the file as it is. -
Firefox kept trying to update v. 3.5.?.?, usually failing. So, I went to the website, then downloaded and installed v. 4. But, when I restart my computer, it reverts back to the old version, loses bookmarks added while using v. 4, and again tries to update v. 3.5. When I look in the folder which contains Firefox, "properties" says I have v. 4, even though what is appearing is not.
See:
* http://kb.mozillazine.org/Preferences_not_saved -
My macbook air wont change songs for iTunes when i use the buttons on the top of my keyboard and when i restart my computer they work for like 10 minutes then stop working again. Did i change a setting? what should i do?
Hello King Cutway
If you are having issues with the functions keys, then check the settings in System Preferences > Keyboard and look to see if Use all F1, F2, etc. keys as standard function keys is unchecked so you can use it properly.
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/HT1296
Regards,
-Norm G. -
my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?
Have you just tried repairing with Disk Utility?
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Maybe you are looking for
-
Cannot print Landscape report to PCL printer - Solved
Has anyone been able to print a landscape BIP PDF to a PCL printer? I am on EBS 11.5.10.2, with BIP 5.6.3, and PASTA 3.0.4. The first report template I tried creating (Discrete Job Pick List Report) in XML Publisher / BIP happens to have a landscape
-
How can i improve a performence of query
How can i improve performence of query which not having the where clause for a table
-
Profit Centre Master Data : Reports
Hello CO Experts, please let me know : 1. which T-Code will generate a report which will display the list of all Profit Centres in that Controlling Area ? 2. which T-Code will generate a report which will display the list of all profit centres & the
-
Hello, I got a problem doing a master detail running in browser ( I?m new to web ) , we used to let our employeer do register what they was doing and how many time it took , this application was running on Desktop, now we make a option to run it on w
-
Do I have to uninstall the CS4 software before updating the NVIDIA driver and reinstall CS4 after?
I have just installed CS4 on Windows 7 and I get the message that I need to update NVIDIA driver. Is it really neccassary to update driver even if I have no problems using Photoshop? Do I have to uninstall the CS4 software before updating the NVIDIA