When I try turning on my iPod touch the apple comes on and then flashes off
Why is my iPod turn on with the apple and then flashing off
Try rebooting, hold down both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Similar Messages
-
On my iPod Touch, the Apple logo appears and then shuts off again. What do I do?
It has been doing this for a while. It became unresponsive so I turned it off and now it won't turn on. I know it's not dead, because I had just got done charging it all the way. I've tried almost everything and it still doesn't work. Help?
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
When I open messages in my iPod touch the screen is black, I have no access to the keyboard and then after 10 secs, the screen bounces back to the home screen, why is this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings.Messages>Send and Receive and sign out of the account and sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
When I turn on my ipod touch the screen goes white and stays white.
When I turn on my ipod touch the screen goes white and stays white. It plays but all I see on the screen is white. I cannot change anything.
It iTunes is asking to enter the passcode then:
- A data recovery company may be able to help
- Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone. -
how to fix ipod touch if it hungs/ does not turn on and stays only on the apple logo when you press/hold the keys home and sleep/wake. and when connected to the computer, it does not appear in the itunes that the ipod is connected or simply the computer does not recognize the device. i barely need you help guys! please...
I found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-) -
How do I join with the network that is in our apt? The iPod asks for a password and I do not have one. What to do?
You have to enter the correct password to connect.
Ask the person who setup the router for the password. -
can any 1 help if so thanks for your help
If your device has been modified, this will not necessarily work...
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
Transfered my music & video library from my laptop to my PC. Syncing my ipod classic and my ipad without incident to the PC. But when I try to sync my ipod touch, the only thing that will sync is music that I have purchased on that PC. Any ideas?
where on my computer am I suppose to make the individual picture files and have them to upload on my ipod touch.... I do have a photo library on my computer, but in the photo tab in itunes for the ipod touch and there is nothing checked for syncing, cause when I do check it it always says its going to replace everything i have in my photo library on my ipod touch..... So how am i suppose to have it checked and have it NOT replace pictures on it????
Also I cannot make more photo albums into my ipod touch, it just replaces the one album every time....
I am very frustrated cause I have tried the manuals and the apple support help etc and nothing pertains to my exact issue.....
Please if u could elaberate I would appreciate it alot.....
thank u -
When I try to update my iPod touch to iOS4.3 I'm told to go to Devices in iTunes, then Summary. I can't find Summary.
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Are you sure you really do not have a 2G iPod? Those can only go to 4.2.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?
Hello brainiac08
Typically that error occurs because of a backup issue. Check out the article below to resolve it.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
When I try to update my iPod Touch, I get an error message saying "The iPod Software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." Has anyone else had that and how do you end up updating your iPod?
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes
When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Are you trying to restore to a PC or an Mac? Either way, I'd remove iTunes, empty the trash, restart, and download/install the latest version. Also, check the versions of OS that the latest build of iTunes will work with. -
HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G
I keep getting error message (26) when I try to restore my iPod touch 3G
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
When i try to Restore my iPod touch 4th gen it says "error" can anyone help!?
When i try to restore my iPod touch 4th gen it says "error" can anyone help?!
Was "error" the complete wording of the error message?
-
when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Maybe you are looking for
-
i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c
-
Can't launch Safari after upgrade to 10.5
Dang Upgraded to Leopard (OS 10.5) from 10.4.11. When launching Safari, it refused to start and sent me error message "PithHelmet version xxx.xx.x hasnt been tested with Safari 3.x so it won't launch." After that, I have disabled and removed PithHelm
-
Mapping corresponding field in the internal table
Hi guys I need help with putting XML value into the appropriate fields in the internal table struc. I attempted to use if else condition to map the element name (cname)over to the fields but those internal table within an internal table post an issue
-
Service Tax Abatement in TAXINJ
Hello Experts. We are mapping scenario of service tax abatement, Currently we are using TAXINJ PROCEDURE, three condition type has been created for abatement i.e.Bed , ecess and secess for abatement and added in tax procedure seperate taX CODE has b
-
Hi! Im rhani, im new to java programming....i was trying to run this code from a book (below) : import java.awt.*; public class FrameExample extends Frame { public static void main(String args[]){ FrameExample win = new FrameExample(); public FrameEx