When I use the NI-DAQ ::DAQ_Op function, it sometimes return

me the error number -10847. The help description of this error is -1084 dmaChainingError New buffer information was not available at the time of the DMA chaining interrupt; DMA transfers will terminate at the end of the currently active transfer buffer. I haven't seen the 10847 Error before and had to do some research to see anything related to it. The only reported incidents I saw had to do with ISA Windows hardware or Nubus Macintosh hardware. So the best I could suggest is:
1) Make sure that Measurement and Automation Explorer (MAX) works
2) See if your Data Acquisition Card passes the Test Resources test in MAX
3) Check your OS any DMA or other resource conflicts.
If those steps fail to show up anything, Let National Instruments know (www.ni.com/ask) what hardware and software you are using and we might be able to offer more suggestions.

Similar Messages

Firefox does not open with the tabs I had open when I use the quit and save function. Firefox opens with my home page only. how to fix?

When I use the "Save and Quit" function it has no effect. The next time I open Firefox it goes to my home page only.
== This happened ==
Every time Firefox opened
== 3 days ago

This is not a solution, nor a work-around. The only thing this points out is where the problem lies. Settings are meant to be used in all sessions, barring exceptions and the fact that Firefox asks if you'd rather SAVE and then quit, makes it an exception. The user has elected to skip the clear browsing history step.
However, if the settings are permanently changed as you suggest, then the history will always be remembered for eternity when Firefox is closed. You then have to manually clear your history first at every session before closing.
Older versions of Firefox never behaved in such manner and recognized that the Save and Quit superseded the setting to Clear History.

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

How do I reorganize my photos on iPad 2? I need to move (not copy) photos from one album to another. When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums. Please help.

You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing.

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing. I do not use iCloud because I have no wifi at home, limited data available for regularly backing up, and I have a 64GB phone and don't wish to pay to upgrade from the 5GB iCloud storage. Am I doing something wrong? It worked so seamlessly on my loaner phone that I am completely stumped as to why it will not restore those items to my original phone again.

The iphone is designed to be synced to your computer or cloud service. Your contacts should be in whatever program/service you have chosen to sync.
If you have failed to do this, then they are likely gone.

When I use the export function of quicktime nothing append and I have the following error message on the console : QuickTime Player[1723]postExceptionEvent caught non-fatal NSInvalidArgumentException

When I use the export function of quicklime (export to iPad,iPhone, Apple TV ... format), nothing append and I have the following error message on the monitor windows, (I'm using quicktime Version 10.4 (833) with OS X Yosemite ):
06/11/2014 22:22:03,507
QuickTime Player[1723]
postExceptionEvent caught non-fatal NSInvalidArgumentException '*** -[NSDictionary initWithObjects:forKeys:]: count of objects (0) differs from count of keys (4)' with backtrace (
0   CoreFoundation                      0x00007fff8ac6564c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff8924f6de objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8ab98dcd -[NSDictionary initWithObjects:forKeys:] + 941
3   Foundation                          0x00007fff8a6a8bcc -[NSDictionary(NSDictionary) initWithCoder:] + 245
4   Foundation                          0x00007fff8a686150 _decodeObjectBinary + 2872
5   Foundation                          0x00007fff8a6854a6 _decodeObject + 278
6   Foundation                          0x00007fff8a6a9921 -[NSKeyedUnarchiver decodeObjectOfClasses:forKey:] + 173
7   Foundation                          0x00007fff8a75f2b4 -[NSError initWithCoder:] + 253
8   Foundation                          0x00007fff8a686150 _decodeObjectBinary + 2872
9   Foundation                          0x00007fff8a6854a6 _decodeObject + 278
10 Foundation                          0x00007fff8a6ab0c9 +[NSKeyedUnarchiver unarchiveObjectWithData:] + 89
11 QuickTime Player                    0x000000010dcd8253 QuickTime Player + 758355
12 QuickTime Player                    0x000000010dc8981f QuickTime Player + 436255
13 QuickTime Player                    0x000000010dc894fb QuickTime Player + 435451
14 QuickTime Player                    0x000000010dc6ce48 QuickTime Player + 319048
15 AppKit                              0x00007fff93c5d75a __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1714 + 113
16 AppKit                              0x00007fff93c4efca -[NSDocument continueActivityUsingBlock:] + 323
17 AppKit                              0x00007fff93c5d5cb __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_21706 + 458
18 AppKit                              0x00007fff93c5d0ec __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1690 + 1365
19 AppKit                              0x00007fff940903b6 -[NSVBSavePanel didEndPanelWithReturnCode:] + 68
20 AppKit                              0x00007fff9409323d -[NSVBSavePanel didEndSheet:returnCode:contextInfo:] + 154
21 AppKit                              0x00007fff93f718d9 -[NSWindow _endWindowBlockingModalSession:returnCode:] + 315
22 AppKit                              0x00007fff9409307c -[NSVBSavePanel observeValueForKeyPath:ofObject:change:context:] + 560
23 Foundation                          0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
24 Foundation                          0x00007fff8a676e48 NSKeyValueDidChange + 463
25 Foundation                          0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
26 ViewBridge                          0x00007fff959cbbd7 -[NSViewBridge nonLocalChangeInProgress:block:] + 382
27 ViewBridge                          0x00007fff95a15766 -[NSRemoteViewMarshal exceptionSafeSetRemoteObject:forKey:withReply:] + 275
28 ViewBridge                          0x00007fff95a158f1 -[NSRemoteViewMarshal setRemoteObject:forKey:withReply:] + 56
29 CoreFoundation                      0x00007fff8ab3e33c __invoking___ + 140
30 CoreFoundation                      0x00007fff8ab3e192 -[NSInvocation invoke] + 290
31 ViewBridge                          0x00007fff95a1bce3 __deferNSXPCInvocationOntoMainThread_block_invoke + 85
32 ViewBridge                          0x00007fff95a1b91e __deferBlockOntoMainThread_block_invoke_2 + 390
33 CoreFoundation                      0x00007fff8ab8354c __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
34 CoreFoundation                      0x00007fff8ab75655 __CFRunLoopDoBlocks + 341
35 CoreFoundation                      0x00007fff8ab75196 __CFRunLoopRun + 1814
36 CoreFoundation                      0x00007fff8ab74838 CFRunLoopRunSpecific + 296
37 HIToolbox                           0x00007fff8cb6f43f RunCurrentEventLoopInMode + 235
38 HIToolbox                           0x00007fff8cb6f1ba ReceiveNextEventCommon + 431
39 HIToolbox                           0x00007fff8cb6effb _BlockUntilNextEventMatchingListInModeWithFilter + 71
40 AppKit                              0x00007fff9383b821 _DPSNextEvent + 964
41 AppKit                              0x00007fff9383afd0 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
42 AppKit                              0x00007fff9382ef73 -[NSApplication run] + 594
43 AppKit                              0x00007fff9381a424 NSApplicationMain + 1832
44 libdyld.dylib                       0x00007fff8ec845c9 start + 1
timestamp: 22:22:03.507 Thursday 06 November 2014
process/thread/queue: QuickTime Player (1723) / 0x7fff78cd0300 / com.apple.main-thread
code: line 844 of /SourceCache/ViewBridge/ViewBridge-99/ViewBridgeUtilities.m in logCaughtException
#exceptions
06/11/2014 22:22:03,525
com.apple.appkit.xpc.openAndSavePanelService[1748]
remote view failed to set bridge object {
    URL = "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v";
    URLs =     (
        "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v"
    index = 1;
    result = 1;
} for key most-recent-completion due to Error Domain=com.apple.ViewBridge Code=8 "L’opération n’a pas pu s’achever. (com.apple.ViewBridge erreur 8)." UserInfo=0x61000006ebc0 {com.apple.ViewBridge.error.hint=most-recent-completion, com.apple.ViewBridge.error.description=NSViewBridgeExceptionError}; service call stack was (
0   ViewBridge                          0x00007fff959e8b30 -[NSViewServiceMarshal setRemoteObject:forKey:] + 341
1   Foundation                          0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
2   Foundation                          0x00007fff8a676e48 NSKeyValueDidChange + 463
3   Foundation                          0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
4   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661407 com.apple.appkit.xpc.openAndSavePanelService + 9223
5   AppKit                              0x00007fff93dead5a -[NSSavePanel _dismissModeless:] + 109
6   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a66191c com.apple.appkit.xpc.openAndSavePanelService + 10524
7   AppKit                              0x00007fff93ded580 -[NSSavePanel ok:] + 449
8   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661952 com.apple.appkit.xpc.openAndSavePanelService + 10578
9   libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
10 AppKit                              0x00007fff93a0a5e7 -[NSApplication sendAction:to:from:] + 410
11 AppKit                              0x00007fff93a0a410 -[NSControl sendAction:to:] + 86
12 AppKit                              0x00007fff93bdedaf __26-[NSCell _sendActionFrom:]_block_invoke + 131
13 libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
14 AppKit                              0x00007fff93a52f2c -[NSCell _sendActionFrom:] + 144
15 AppKit                              0x00007fff93bc5ab2 -[NSButtonCell _sendActionFrom:] + 39
16 libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
17 AppKit                              0x00007fff93a6da66 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 2731
18 AppKit                              0x00007fff93a6ccc1 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 491
19 AppKit                              0x00007fff93a6c289 -[NSControl mouseDown:] + 714
20 AppKit                              0x00007fff93f65fef -[NSWindow _reallySendEvent:] + 12827
21 AppKit                              0x00007fff939f065c -[NSWindow sendEvent:] + 368
22 AppKit                              0x00007fff939a21e6 -[NSApplication sendEvent:] + 2238
23 ViewBridge                          0x00007fff959d18ab -[NSViewServiceApplication sendEventWithoutCatch:withForwarding:] + 652
24 ViewBridge                          0x00007fff959d1fbd -[NSViewServiceApplication sendEvent:withForwarding:] + 29
25 AppKit                              0x00007fff9382efe8 -[NSApplication run] + 711
26 AppKit                              0x00007fff9381a424 NSApplicationMain + 1832
27 libxpc.dylib                        0x00007fff88837ef2 _xpc_objc_main + 793
28 libxpc.dylib                        0x00007fff88839a9d _parse_sysctl_once + 0
29 ViewBridge                          0x00007fff95a20165 xpc_connection_handler + 0
30 ViewBridge                          0x00007fff959d4ff7 NSViewServiceApplicationMain + 1892
31 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a665035 main + 208
32 libdyld.dylib                       0x00007fff8ec845c9 start + 1
33 ???                                 0x0000000000000001 0x0 + 1
timestamp: 22:22:03.525 Thursday 06 November 2014
process/thread/queue: com.apple.appkit.xpc.openAndSavePanelService (1748) / 0x7fff78cd0300 / com.apple.main-thread
code: line 3847 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in __47-[NSViewServiceMarshal setRemoteObject:forKey:]_block_invoke_2
#communications_failure

Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens

When I use the function of "finding keyword", the word would be shown in green. Can I set the colour by myself?

When I use the function of "finding keyword"(ctrl+f), the keyword would be shown in green. I want to change the highlighted colour to be blue. Is there any function to change the colour?

See '''''cor-el's''''' answer in this thread: https://support.mozilla.com/en-US/questions/900541
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4. Are there any fixes?

I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4. Are there any fixes?

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

Both my boss and I have the iPhone 5C for Verizon. When I text, I have the little microphone next to the space bar, allowing me to use the speech to text function. He does not. How do you turn this on or remedy this problem?

Both my boss and I have the iPhone 5C for Verizon. When I text, I have the little microphone next to the space bar, allowing me to use the speech to text function. He does not. How do you turn this on or remedy this problem?

Does your boss have Siri turned ON? See Settings > General > Siri.

Is there a way to use the preview in browser function without an Internet connection?

This morning our cable modem was down and I was making some changes to a page in a Muse site I'm designing. I wanted to preview the changes in a browser, but when I clicked on the Preview button (or clicked on preview in browser), I received a notification that it was checking for an Internet connection and the preview page never completed. Is there a way to use the preview in browser function in Muse without an Internet connection?

Thanks for getting back to me! When our cable modem went down, we were still connected to Airport Base Station, and perhaps it appeared to Muse that we did have an Internet connection. In any case, we have now received a new cable modem and our network is working again. As you suggested, I disconnected from the network and tried preview in Muse again, and now it seems to be working just fine. Perhaps it was just the circumstances of our network problem this morning. Good to know I can use the Muse Preview function off-line!

I have a new iMac running OS 10.9 when I use the Command S shortcut it no longer saves the active document it speaks it instead.

I have a new iMac running OS 10.9. When I use the Command S shortcut in any of my apps (numbers, text edit etc), it no longer saves the active document it speaks it instead. How can I revert to the save shortcut function?

have you looked in
system preference->Dictiation & speech if it's assigned there?
or system preference->accessibility if it's assigned there?

With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or album.

With using any version of iTunes, whenever I import songs into my library using the "add to library" function, iTunes adds those songs in songs' alphabetical order. This is pretty annoying since it does not preserve the logical track number or even the album sort order (for example when adding 2 albums stored in a unique folder). Anyone has any ideas ? Been stumped for a while....!!!

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

Using the result of a function, inside a subselect

Hi!
I´m wondering if it´s possible to use the result of a function inside a subselect. Let me give you an example of what I´m trying to do here:
select * from t_node where node_pk in (get_node_parents_pk(22345));
The function get_node_parents_pk stands in for the following SELECT-statment:
select node_pk from t_node_child where parent_node_pk = 12345
The statement above would return something like this: 12435,23423,23453,23452
These values represent the node_pk value for the parent nodes.
I want the get_node_parents_pk function to return a result set similar to this so that I might call it inside the IN ( ) statement.
Any clue? =)

I created a collection type in the database:
CREATE OR REPLACE TYPE nodes_pk_arr IS TABLE OF INTEGER;
The function get_node_parents_pk () is made to return the collection type above. However, this does not work. I get the following error message:
SELECT *
FROM t_node
WHERE node_pk IN
(SELECT * FROM TABLE (get_node_parents_pk (22345)));
ORA-22905: cannot access rows from a non-nested table item
However, if I insert a nodes_pk_arr collection directly into the SQL-statement, like I do below, it works:
SELECT *
FROM t_node
WHERE node_pk IN
(SELECT * FROM TABLE (nodes_pk_arr(24564,23545,34523));
So, when returning the collection from the function I´m told that the collection is not a nested table, when in fact it is. What gives?
Also, is there no way to return a result set directly from the get_node_parents_pk() function, making it possible to write the statement like that shown below?
SELECT *
FROM t_node
WHERE node_pk IN (get_node_parents_pk (22345));
Your reply is much appreciated!
Kind regards
Robert

I found a track yesterday using the new siri-shazam function. Now, how do I see tracks I've found ?

I've used the new siri-shazam function to look for a track yesterday. Now how do I find it ?

You need the Kernel source and the ALSA source packages installed for ubuntu for the build to work right.
It looks like the installer is having an issue trying to extract the package. You need to make sure you are root and when you switch to root, type "su - " without the quotes so that you get the environment of the root user as well which will have the correct paths for the /sbin and etc.
After you extract everything and the setup completes, dont' worry because it won't work.
Please god send us another Audio card from another company that cares.

Error 91 - Trying to Use the Variant to Data Function

I am running into a problem when trying to use variants in my application. I have a state machine set-up in that one state creates a task list (cluster of arrays) and then converts it to variant. The variant is fed into a shift register that allows me to access the task list from a different state.
The problem comes when I try to use the Variant to Data function. I right click on the task cluster to create a constant, and then wire that to the TYPE terminal of the Variant to Data Function. I wire the task cluster variant to the VARIANT terminal. When I run the VI, i get error 91: Possible reason(s): LabVIEW: The data type of the variant is not compatible with the data type wired to the type input.".
How can I get this error when the type I wired to the TYPE terminal of the Variant to Data terminal is a constant created from the exact type created a variant from???
Section of the state machine where I wire the cluster to variant:
Section of the state machine where I use the Variant to Data to get the cluster out:
The constant wired to the Variant to Data TYPE terminal was created from the cluster that is wired to the Data to Variant. I do not understand how there can be a type mismatch???
Solved!
Go to Solution.

Charles_CLA wrote:
crossrulz wrote:
Are there any other state that run between these two? I am noticing you have some "Use default if unwired" tunnels comming out of your case structure. First of all, disable that on the tunnels. Secondly, for those cases where you are not affecting that data, wire the data straight from the input tunnel to the output tunnel. I recommend using the linked tunnels to make it even easier on yourself.
With the default tunnels being output, your variant coming in could really be empty, therefore the conversion fails.
Are you stalking me today? Every single post I've clicked comment on, you beat me by a hair!
No, just 12 hour days (due to the holiday) get really long...and you are just slow.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

When I use the NI-DAQ ::DAQ_Op function, it sometimes return

Similar Messages

Maybe you are looking for