When Scan email for junk mail, or virus's is enabled, sending mail fails

When I configure mail to scan email for either junk or virus's, i get the following in my SMTP log:
Sep 6 17:44:59 eve postfix/smtp[28412]: D60C89D66D: to=<[email protected]>, relay=none, delay=0.02, delays=0.01/0/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
If I disable both junk and virus's I am able to send normally
Any ideas?

when I run:
ps U _amavisd
The only processes are:
PID TT STAT TIME COMMAND
3308 ?? Ss 0:01.32 clamd
3593 ?? Rs 0:03.79 clamd
I then ran amavisd, and did not get any errors at the terminal, but here are my logs
soundchristian.org /usr/bin/amavisd[7979]: Module Digest::MD5 2.36
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module IO::Socket::INET6 2.51
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module MIME::Entity 5.420
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module MIME::Parser 5.420
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module MIME::Tools 5.420
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::Header 1.74
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::Internet 1.74
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::SPF::Query 1.999001
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::SpamAssassin 3.002001
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Net::DNS 0.60
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Net::Server 0.87
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Time::HiRes 1.86
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module URI 1.35
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Unix::Syslog 0.99
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Amavis::DB code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Amavis::Cache code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SQL base code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SQL::Log code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SQL::Quarantine NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Lookup::SQL code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Lookup::LDAP code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: AM.PDP-in proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SMTP-in proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Courier proto code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SMTP-out proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Pipe-out proto code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: BSMTP-out proto code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Local-out proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: OS_Fingerprint code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: ANTI-VIRUS code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: ANTI-SPAM code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: ANTI-SPAM-SA code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Unpackers code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found $file at /usr/bin/file
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No $dspam, not using it
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No $altermime, not using it
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .mail
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .asc
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .uue
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .hqx
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .ync
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .F tried: unfreeze, freeze -d, melt, fcat
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .Z at /usr/bin/uncompress
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .gz at /usr/bin/gzip -d
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .bz2 at /usr/bin/bzip2 -d
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .lzo tried: lzop -d
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .rpm tried: rpm2cpio.pl, rpm2cpio
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .cpio at /bin/pax
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .tar at /bin/pax
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .deb tried: ar
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .zip
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .7z tried: 7zr, 7za, 7z
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .rar tried: rar, unrar
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .arj tried: arj, unarj
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .arc tried: nomarch, arc
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .zoo tried: zoo, unzoo
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .lha tried: lha
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .cab tried: cabextract
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .tnef tried: tnef
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .tnef
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .exe tried: rar, unrar; lha; arj, unarj
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Using primary internal av scanner code for ClamAV-clamd
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Creating db in /var/amavis/db/; BerkeleyDB 0.29, libdb 4.2
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: logging initialized, log level 2, logfile: /var/log/amavis.log
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: starting. /usr/bin/amavisd at mail.southsoundchristian.org amavisd-new-2.5.1 (20070531), Unicode aware
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: user=, EUID: 0 (0); group=, EGID: 0 5 80 4 9 3 29 8 2 20 1 0 (0 5 80 4 9 3 29 8 2 20 1 0)
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: Perl version 5.008008
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3659]: INFO: SA version: 3.2.5, 3.002005, no optional modules: DBD::mysql Mail::SpamAssassin::BayesStore::PgSQL NetAddr::IP NetAddr::IP::Util auto::NetAddr::IP::Util::inet_n2dx auto::NetAddr::IP::Util::ipv6_n2d Mail::SpamAssassin::Plugin::DKIM Razor2::Client::Agent IP::Country::Fast Mail::DKIM Mail::DKIM::Verifier Image::Info Image::Info::GIF Image::Info::JPEG Image::Info::PNG Image::Info::TIFF Mail::SPF Mail::SPF::Server Mail::SPF::Request Mail::SPF::Mech Mail::SPF::Mech::A Mail::SPF::Mech::PTR Mail::SPF::Mech::All Mail::SPF::Mech::Exists Mail::SPF::Mech::IP4 Mail::SPF::Mech::IP6 Mail::SPF::Mech::Include Mail::SPF::Mech::MX Mail::SPF::Mod Mail::SPF::Mod::Exp Mail::SPF::Mod::Redirect Mail::SPF::SenderIPAddrMech Mail::SPF::v1::Record Mail::SPF::v2::Record Crypt::OpenSSL::RSA auto::Crypt::OpenSSL::RSA::newpublickey auto::Crypt::OpenSSL::RSA::newkey_fromparameters auto::Crypt::OpenSSL::RSA::getkeyparameters auto::Crypt::OpenSSL::RSA::importrandomseed Digest::SHA Error
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3659]: SpamControl: initprechroot done
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Process Backgrounded
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: 2008/09/07-16:41:18 Amavis (type Net::Server::PreForkSimple) starting! pid(3661)
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Binding to UNIX socket file /var/amavis/amavisd.sock using SOCK_STREAM
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Binding to TCP port 10024 on host 127.0.0.1
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Binding to TCP port 10026 on host 127.0.0.1
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Setting gid to "83 83"
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Setting uid to "83"
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)FATAL: It is possible to change EUID from 83 to root, ABORTING!
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)FATAL: Please use the most recent Net::Server
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)FATAL: or start as non-root, e.g. by su(1) or using option -u user
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)TROUBLE in preloophook: SECURITY PROBLEM, ABORTING at /usr/bin/amavisd line 7763.
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!)_DIE: Suicide () TROUBLE in preloophook: SECURITY PROBLEM, ABORTING at /usr/bin/amavisd line 7763.\n
eve.southsoundchristian.org and mail.southsoundchristian.org are the same server, with different NICs and IPs
I was thinking about upgrading to amavisd-new I found a tutorial at http://osx.topicdesk.com/content/view/138/41/
Do think that may help?
I did update clamd after my first post on this, and it looks like clamd is running, just nothing else.
Thanks

Similar Messages

Thunderbird fails to send email when "Scan email for junk mail" option is checked in Server Admin

I have 2 clients that need to send mail through my server, one Mac and one Windows. The Mac uses apple mail and the Windows machine uses Thunderbird.
Apple Mail will send fine, it is set up for "Use Default ports 25, 465, 587" and "Use SSL" and "Authentication: MD5 Challenge-response".
Thunderbird refuses to send and I don't even see any errors showing up in the Console on the OS X server under smtpd entries.
If I uncheck the "Scan email for junk mail" option on the server, then Thunderbird will send fine.
Thunderbird is set up as: "smtp port 587 (default)" "connection security: STARTTLS" "Authentication method: Encrypted Password"
May or may not be relevant: I use virtual domains as well as aliases.
Server: Mac OS X Server version 10.5.8

Solved it, looks like maybe the smtpd settings for sasl authentication may not have been correct. I followed everything in http://osx.topicdesk.com/content/view/38/41/ the "Frontline Spam Defense for OS X server" guide and now can send mail just fine from Thunderbird Winodws and from Apple Mail.

When forwarding mail i select a group to send mail and when i go to select another group it will not open for me to select other emails in that file.

when forwarding mail i select a group to send mail and when i go to select another group it will not open for me to select other emails in that file.

When you select a "group", it automatically selects everyone in that group.
If your just trying to add other people outside that group, then in the "To" make sure the curser is just after the last entry and you can hold your finger on that line to get your contact list to pop up or after the last entry you should have showing after that ;
Example: [email protected]; [email protected]; *notice the ; then a space for the next one

Failed to send invitation emails to recipients. detailed error: an error occurred while sending mail.

I tried to send a distributed form out to myself to check the system and received this error message: failed to send invitation emails to recipients. detailed error: an error occurred while sending mail. Any idea what I may have done wrong? I am using Microsoft Outlook 2010 with Windows 8.1 OS.

I think century link did change some settings though.
Help menu (Alt+H) > troubleshooting information. Copy to clipboard and paste into a reply here. Then I can see what setting your using with century link and compare them to what century link provide.

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

Scan emails for Viruses

We are looking into replacing Forefront Protection for Exchange with a 3rd party appliance that scans emails at the gateway for viruses and spam.
My one concern is that FPE scanned emails internally as well and this solution wouldn't address that.
On the clients, we currently use System Center 2012 Endpoint Protection and by default email scanning is disabled.
Is this something we should enable when we migrate away from FPE?
Heath

Hi,
Based on my understanding, if you wanted to prevent FPE from scanning emails, you can configure FPE to disable or bypass transport scanning of all e-mail messages. In addition, after you disable transport scanning, you need to stop and then
start the Exchange Transport service in order for changes to this setting to take effect. For more detailed information, please refer to the link below:
Configuring the transport scan
Best regards,
Susie

Cannot see image when scanning check for neteller OS X 10.10

I am trying to use my bank's electronic deposit app. When I scan the check I do not see the image and cannot submit it to the bank. So far I have to use my Windows PC to do this. Will HP provide full software for the MAC ever or must I keep using a PC forever so I can deposit my checks?

Hey there @iMACguy13!
Thanks for posting on the HP Forums!
I can see that when scanning cheques to your Mac running 10.10 your unable to see the image. I may be able to provide some helpful suggestions!
From what I can see there is no full feature software and drivers for the Photosmart C410a on Mac OSX 10.10. You should still be able to scan using the application in the Mac called Image Capture. Image Capture is located in the Application folder of your Mac. Using Image Capture your should see your scanner on the left side. It may be listed under shared. Once you select your scanner you should see settings on the right side for scanning. There is also an option to preview the scan before you save it.
Within Image Capture you can also change the DPI settings to increase the resolution of the image. This may help fix the quality issue!
Please post back and let me know how it goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

What is the ideal configuration when scanning photos for iMovie?

When scanning photos to use in iMovie, what is the best dpi resolution? 72 dpi, 100 dpi, 150 dpi, 300 dpi?
What is the best print size? Scan it at 8 inches, 10 inches, 12 inches?
When saving to jpg, what quality is best to save at? 8, 10, 12?
Any help would be appreciated!

DPI (dots per inch) are only used when printing and iMovie will only look at the file dimensions.
But scanning images takes a lot of time and you may want to use the same images in other software so you should make the settings appropriate for future printing.
Scan (always in "landscape mode") using settings appropriate for printing (300 dpi) and sized for the largest prints you may want to make. TIFF is much less compressed than JPEG. Bring these files in iPhoto and export them out as JPEG sized at 640X480 for use in iMovie.

Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
"unable to scan filename " (internal error)
thanks

Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again

HT3228 I set up my work e-mail on iphone. When I try to send an e-mail, an error code says "Cannot Send Mail", "recipient rejected by server because it does not allow relaying". What does this mean and how do I correct it?

I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?

Get the correct mail server settings from your IT department.

HT1694 Changed password on email account, including in mail settings,and now can't send mail from iPad

My email account account(msn.com) was hacked so I changed my passwod at msn.com and then als0 changed it on myiPad under settings/mail.
Now I cannot send email or photos with email.
Suggestions? I only have an iPad as I am traveling.
I can send emails if I sign in through Safari.

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Mail suddenly no longer able to send mails

Ever since I upgraded to Snow Leopard, Mail refuses to send my mails via my standard provider. I get the error message that the provider rejected my password. Which is odd, since there is no password required to send mails.
Not being able to get this solved, I bypassed the problem by having Mail send my mails via my GMail account. I know, this is a bit awkward for the people receiving my mails, but it works.
Or at least, for the past few months it worked, and now, all of a sudden, I get the exact same error message for mails I am trying to send via GMail!
As far as I know, nothing has changed. I have not done any system updates recently (at least not in the last few days, and yesterday, Mail still worked properly).
When I had the problem with my provider some months ago, I browsed the support pages, but nothing the pages said, solved the problem. I fiddled about with my account settings until my fingers were numb and I had depleted every possible suggestion, but to no avail.
Anyone else experience this problem? How did you get it to work? Or is this a rather annoying bug in Mail that Apple needs to solve asap?
Thanks for your feedback.
J.

Please, turn off caps lock, screaming in your post is not necessary. What's your email client? Webmail? Outlook Web App? Try to delete the Firefox cache and test.

Apple Mail 7.1 (1827) Slow to Send Mail Messages

Apple Mail 7.1 delays the sending of messages from iCloud or third-party ISP mail accounts by 20 to 30 seconds. While this behavior is not 100% consistent, it is reproducible 70% of the time.
Restarts or quit & relaunch Mail.app has no impact. Apple Mail has had all night to sync my two accounts (1 iCloud account and 1 third-party ISP account)
No error messages are thrown, all mail does send successfully, eventually.
This problem occurs on both my Apple MacBook Pro 2.7 i7 mid– 2012 and 2.6 Mid-2012. One had a fresh copy of Mavericks installed and the other had an update from Mountain Lion.
Synchronization has been performed, as well, the rebuild command has been executed.
The behavior also occured during an attempt to investigate the issue when a Mail account (in this case, a friends iCloud account) was installed into a newly created computer user account (standard or admin)
Clearly, not the most serious problem to have but one that merits discussion and eventual resolution.

I am having the same issue with Mail 7.1 (1827). I have looked at all of the alternatives, but keep coming back to Mail. Airmail Beta, however, was outstanding. Write an email click send and it's gone like a rocket! If they keep developing, they will give Mail a run for the money.
That said, I like the search abilities in Mail and the smart folders. I keep coming back. Plus I like CMD+Shift+D to send. If I am out at a wifi spot and do an email, I really don't like having to sit there waiting for Mail to decide wether it wants to send or no. Perhaps I'll look at using alternative smtp ports? Maybe Mail doesn't like using port 26? Whatever the case, I wish they'd fix it.

Mail + Exchange IMAP Server won't send mail

Any help would be appreciated!-
My university just switched over to Exchange 2007 for our mail servers, and since the change occurred, I can receive my mail just fine with the IMAP settings they provided. The problem occurs when I attempt to send mail; the server rejects my password (which I know is correct) and will not send any mail. I've also put below the link that the university has provided for students to set up their mail accounts within. I called IT, and they said that Mail wouldn't work until Apple updated their program, which didn't seem right to me because I'm sure that I would see more people complaining than just me. I am on campus, which would also eliminate the need for using the available VPN client.
Can any of you see maybe what settings they may have missed mentioning to us loyal mac fans on campus?
Their guide for connecting mail is located at:
https://servicenow.ou.edu/kbview.do?sysid=0f8482a87f000001012772bc7e347fb6
Thank You for any help you may provide!

Jimmy,
Many email providers do not allow emails to be sent on their outgoing servers when the user is outside of their network as an anti-spam protection. This may explain why you were able to send mail from your school account when you were on your school's Wi-Fi connection, but not on your home connection or EDGE. You may want to check with your school's email provider to verify this is the case.
In the meantime, this article has some good troubleshooting steps and alternatives that you can use so that you will be able to send mail when you are away from your school's Wi-Fi network:
http://docs.info.apple.com/article.html?artnum=305634
Hope this helps,
Jennifer B.

TS3899 The mail aplication isn't retriving or sending mail

The mail app in my Ipad stoped retriving or sending messages I keep resiving an error message teling that the imap.gmail or imap.aol in not responding,
I tried removing one of the account and setting it again but when setting it recived a message teling the ssl coudn't be set (in gmail)
I also restarted the ipad
Don't know what else to do.
Samuel

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

When Scan email for junk mail, or virus's is enabled, sending mail fails

Similar Messages

Maybe you are looking for