When starting my Azure project in local debug mode, I get "Object reference not set to instance of an object" ...
... And then what happens is the application fails to start. I have the cloud service set as the startup project, and the HttpFacingInterface project, an MVC application, set as the only role. I have tried loading and unloading everything
as well as deleteing the role and re-adding it in the cloud service. I'm not sure when this started, as I had been working on a third project in the solution, a unit test project, which also exists but isnt added as a role to the cloud service. Please
help, I'd like the application to run normally.
hi Nathan,
Thanks for posting!
Did you want to add the UnitTest Project as a role into your azure project? Or Did you want to remove it?
If you want to add "UnitTest Project " as a role, the answer is no. This type project is only used as a test performance of your project. If you want to remove it from your project, you could right click on it, and select "remove
" directly. Or you could disable the checkbox on new project page, like this picture:
Also, you could refer to this solution from this page (http://www.amido.co.uk/mark-omahoney/publishing-in-windows-azure-object-reference-not-set-to-an-instance-of-an-object/
Hope it helps.
If I am misunderstanding, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Object Reference not set to instance of Object when sub-report on new page
I have a problem when my sub-report goes onto the second page of the report, with an error message.
My VB.NET displays a report and sub-report (in the footer) in a CrystalReportViewer:
- When both are on the first page, both display fine
- When the sub-report (or at least part) goes to the second page, the report displays OK, but without the subreport. When I go to page 2 of the report - hoping to see the sub-report - an error message is displayed, with title "Crystal Report Windows Forms Viewer" and text "Object Reference not set to an instance of an object".
This problem occurs both on my development machine in VS and at a user site.
Am desperate for some ideas please! I have VB.NET in Visual Studio 2010, and SAP Crystal Reports, version for Visual Studio 2010. The program is targeted for .NET Framework 3.5.
I looked for the HandleException event on my Windows Forms Viewer, as suggested by SAP and Microsoft, but cannot find this. See for [example|http://devlibrary.businessobjects.com/businessobjectsxi/en/en/crystalreports_dotnet_sdk/crystalreports_net_doc/doc/crsdk_net_doc/html/crlrfwindowsformscrystalreportviewerclasshandleexceptioneventtopic.htm]Usually, the error is due to the object going out of scope. Placing the object in a session may help. Moving the CR code to page init or page load may help. Looking at samples may help:
http://wiki.sdn.sap.com/wiki/x/JQBmBQ
CR Dev help files are here:
SAP Crystal Reports .NET API Guide http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip
SAP Crystal Reports .NET SDK Developer Guide http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip
Finally, ensure you are using Service Pack 2 (see the sticky thread at the top of this forum).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
"Object reference not set to an instance of an object" when opening designer
I have a Windows Forms project which was originally developed in Visual Studio 2010. I migrated the project to VS2013, and now every time I open the project's main form, the designer complains of a null reference. If I hit "Ignore and Continue",
the code compiles just fine. The error in question appears in the "Windows Form Designer generated code" region. Even more curious, the line in question is not the first reference to the object. It's as if the first few times it needs to interact
with the object, it's fine, then at a certain point it becomes null.
Here is the call stack for the error:
at System.ComponentModel.ReflectPropertyDescriptor.SetValue(Object component,
Object value)at
Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkPropertyDescriptor.SetValue(Object
component, Object value)at
System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializePropertyAssignStatement(IDesignerSerializationManager
manager, CodeAssignStatement statement, CodePropertyReferenceExpression
propertyReferenceEx, Boolean reportError)at
System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeAssignStatement(IDesignerSerializationManager
manager, CodeAssignStatement statement)at
System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeStatement(IDesignerSerializationManager
manager, CodeStatement statement)
And here is the code in question:
this.optionsControl.Anchor = ((System.Windows.Forms.AnchorStyles)((((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) | System.Windows.Forms.AnchorStyles.Left) | System.Windows.Forms.AnchorStyles.Right)));
this.optionsControl.IsAsciiMode = false;
this.optionsControl.Location = new System.Drawing.Point(3, 3);
this.optionsControl.LogControl = null;
this.optionsControl.Name = "optionsControl";
this.optionsControl.PlugInManager = null;
this.optionsControl.PortFacade = null;
this.optionsControl.Size = new System.Drawing.Size(613, 259);
this.optionsControl.TabIndex = 0;
The problem is reported at the third line, "this.optionsControl.Location = new System.Drawing.Point(3, 3);".Hi Eric,
I have made a research about your issue, and I found it might be caused by the usercontrol in the project. Was “this.optionsControl” a UserControl? It seems that this issue was difficult to handle.
If possible, I would recommend you recreate this control in a new project.
In addition, I think you could turn to the links below, they may be useful to you:
# How to get more information about exceptions thrown by the designer when switching from code to design view?
http://community.sharpdevelop.net/forums/p/16124/43105.aspx
# How to avoid WSODs in the Visual Studio 2005 Designer
http://www.codeproject.com/Articles/13584/How-to-avoid-WSODs-in-the-Visual-Studio-Desig
# design time error: object reference not set an instance of an object but runs fine
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b3676bef-e457-4aac-b438-d3ed8a667e3f/design-time-error-object-reference-not-set-an-instance-of-an-object-but-runs-fine?forum=winforms
Best Regards,
Edward
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
I'm running this command in the Azure PowerShell to deploy my node project as a service:
Publish-AzureServiceProject -ServiceName <name> -Location "East US"
Using my service name instead of <name>.
Each time I run this, I get an error:
Publish-AzureServiceProject : Object reference not set to an instance of an
object.
At line:1 char:1
+ Publish-AzureServiceProject -ServiceName <name> -Location "East US"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Publish-AzureServiceProject], N
ullReferenceException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.CloudService.Pub
lishAzureServiceProjectCommand
I have added my certificate and verified it with Get-AzureSubscription.
Can anyone help?When I run Get-AzureSubscription, the subscription already seems to be set. I assume this happened when I imported my publish settings. I tried your suggestion to do it manually, but this didn't fix my problem.
I've started implementing the deployment script linked in the blog post, but I'm running into all sorts of problems as I try to do so. First, this seems to assume I have a service package and publish settings. I'm guessing the package is going to need to
be generated for each deployment, but the script doesn't handle this. How can I also have the script generate the new package so that the service can be deployed? I've currently hard-coded the path of cspack into the script, but this seems like a bad way to
do it.
Since the publish settings have the certificate, I imagine I don't want to commit those to version control. Can I also generate this as part of the script? I want the script to be as hands-off as possible.
Thank you for your help! -
When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I have a csv file that I need to generate a schema for. I am trying to generate a schema using flat file schema wizard but I keep getting "Object reference not set to an instance of an object." error when I am clicking on the Next button after
specifying properties of the child elements on the wizard. At the end I get schema file generated but it contains an empty root record with no child elements.
I thought may be this is because I didn't have my project checked out from the Visual SourceSafe db first but I tried again with the project checked out and got the same error.
I also tried creating a brand new project and generating a schema for it but got the same error.
I am not sure what is causing Null Reference exception to be thrown and there is nothing in the Windows event log that would tell me more about the problem.
I am using Visual Studio 2008 for my BizTalk development.
I would appreciate if some has any insides on this issue.Hi,
To test your environment, create a new BizTalk project outside of source control.
Create a simple csv file on the file system.
Name,City,State
Bob,New York,NY
Use the Flat file schema Wizard to create the flat file schema from your simple csv instance.
Validate the schema.
Test the schema using your csv instance.
This will help you determine if everything is ok with you environment.
Thanks,
William -
I have installed Project Server 2013 on SharePoint 2013, and installed the first PWA which worked. But I needed to change some configurations and so I deleted the PWA instances, but now I cannot delete the Project Server Service Application. Every attempt
to delete the Service Application it gives the error above, namely:
Sorry, something went wrong
Object reference not set to an instance of an object.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: ecaeaf9c-9fec-3049-ba23-d9a18337b9e2
Date and Time: 8/18/2014 12:55:31 PM
I'd urgently appreciate help.Thanks Paul for the reply. Here's the error, and the logs below covering the time the error occurred.
I've tried to extract a section of the log file below:
==========================================================
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm.
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
08/18/2014 19:20:19.07 w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
08/18/2014 19:20:19.07* w3wp.exe (0x542C)
0x6DF4 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
08/18/2014 19:20:19.07 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
af4yd High [Forced due to logging gap, cached @ 08/18/2014 19:20:18.99, Original Level: Verbose] TenantAppEtag
record requested but there is no sitesubscription or tenantId for site {0} so we will use the WebApp Id for the cache. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.07 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Asp Runtime
aj1kp High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.10 w3wp.exe (0x7240)
0x7370 Project Server Unified Logging Service
b8fx High ULS Init Completed (w3wp.exe, Microsoft.Office.Project.Server.Native.dll) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.15 w3wp.exe (0x7240)
0x7370 0x6FB7007
6t8h High [Forced due to logging gap, cached @ 08/18/2014 19:20:19.07, Original
Level: Verbose] {0} f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.15 w3wp.exe (0x7240)
0x7370 Project Server Provisioning
9or8 High [Forced due to logging gap, Original Level: Verbose] Unprovisioning service app {0}
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.16 w3wp.exe (0x7240)
0x7370 Project Server Provisioning
8ig5 High Unregistering project psi shared application timer job. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.21 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
8nca Medium Application error when access /_admin/ServiceApplicationDelete.aspx,
Error=Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob() at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication
psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData) at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender,
EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyn... f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.21* w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
8nca Medium ...cPoint, Boolean includeStagesAfterAsyncPoint)
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.23 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Runtime
tkau Unexpected System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob()
at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData)
at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoin... f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.23* w3wp.exe (0x7240)
0x7370 SharePoint Foundation Runtime
tkau Unexpected ...t) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.24 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception
of type 'System.Web.HttpUnhandledException' was thrown. ---> System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.get_ServiceAppTimerJob()
at Microsoft.Office.Project.Server.Administration.ProjectPSISharedApplicationTimerJob.Unregister(PsiServiceApplication psi) at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.Unprovision(Boolean deleteData)
at Microsoft.SharePoint.ApplicationPages.ServiceApplicationDeletePage.OkButton_Click(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.Rais...
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.24* w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajlz0 High ...ePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm. 67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32 w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.32* w3wp.exe (0x14A4)
0x6508 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
67c4af9c-afed-3049-ba23-d538b7dde463
08/18/2014 19:20:19.38 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Upgrade
aiaih High [Forced due to logging gap, Original Level: Verbose] desiredVersion: {0}
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.41 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
aat87 Monitorable f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm. f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.43 w3wp.exe (0x7240)
0x7370 SharePoint Foundation General
ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://sharepoint:48488/_admin/ServiceApplicationDelete.aspx?id=24024e6bfd8f486ea7ab0b68658ce165&IsDlg=1
f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:19.46 w3wp.exe (0x7240)
0x7370 SharePoint Foundation Monitoring
b4ly Medium Leaving Monitored Scope (Request (POST:http://sharepoint:48488/_admin/ServiceApplicationDelete.aspx?id=24024e6bfd8f486ea7ab0b68658ce165&IsDlg=1)).
Execution Time=550.415729455012 f1c4af9c-7f7e-3049-ba23-ddc2aa2f9d7b
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
00000 Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present or running in the farm.
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedLogonTokenCache' - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'.
08/18/2014 19:20:20.08 w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
air4g Monitorable Token Cache: Failed to initialize SPDistributedSecurityTokenCache Exception: 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory
- No cache hosts are present or running in the farm. at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory() at Microsoft.SharePoint.DistributedCaching.SPDistributedCache..ctor(String
name, TimeSpan timeToLive, SPDistributedCacheContainerType containerType, Boolean encryptData) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenCache..ctor(String name, TimeSpan timeToLive, SPDistributedCacheContainerType
containerType, Boolean encrptyData, TimeSpan minimumTokenExpirationWindow) at Microsoft.SharePoint.IdentityModel.SPDistributedSecurityTokenC...
08/18/2014 19:20:20.08* w3wp.exe (0x542C)
0x6EC4 SharePoint Foundation DistributedCache
air4g Monitorable ...acheInitializer.Init(Object state)'.
08/18/2014 19:20:20.30 OWSTIMER.EXE (0x09C4)
0x09F8 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish). Parent No acba9844-723f-4477-901c-adfdcae98e4e
08/18/2014 19:20:20.30 OWSTIMER.EXE (0x09C4)
0x09F8 SharePoint Foundation Logging Correlation Data xmnv
Medium Name=Timer Job SchedulingUnpublish f1c4af9c-ffd4-3049-ba23-d4fe1cc1d1d7
08/18/2014 19:20:20.31 OWSTIMER.EXE (0x09C4)
0x0A10 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish). Parent No 5dbf5387-ba14-4980-bc61-5ba5490870fa
==============================================
Thanks for the attention. -
"object reference not set to an instance of an object" error while running ssrs report locally
Hi Folks,
I am a bit new to SSRS.
I am using ssrs 2012 and trying to use a method from a dll file. I am loaded the assembly file in reference of the report.
Now I am trying to use a static method from the Dll. e.g. applicationName.classname.MethodName()
But while running the report I am getting "object reference not set to an instance of an object" error.
For a note I am trying execute the report locally.
Any help would be highly appreciable.
sarat chandra sahooSorry for late reply Sinaloe..
I have added a dll file in my report reference. And in a textbox trying to execute this below.
=Recall.Common.LocalizationEx.Localization.GetString(Parameters!Culture.Value, "RFID", "BICustomerPortal")
where Getstring() is a static method in the dll.
I guess some configuration setting I am missing here.
1. I have copied these dlls in "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies" and "C:\Windows\Assembly".
sarat chandra sahoo -
"Object reference not set to an instance of an object" when using Sheel Shah's example
I am attempting to use a custom add dialog as in http://blogs.msdn.com/b/lightswitch/archive/2011/07/07/creating-a-custom-add-or-edit-dialog.aspx and
I get the error "Object reference not set to an instance of an object." when clicking my button to AddEntity(). My code to call the control is:
User u = new User();
userdialoghelper.AddEntity(u);
Any ideas as to why I'm getting this error? I "think" that I've set up the class properly?
ScottI may be a couple of years late to the party here (using VS2013) but I also had some issues adapting to Yann's improvements over Sheel's code.
Sheel's screen code as provided has the word "Old in the InitializeDataWorkspace and the created methods. this does not work when copy/pasted. ALso removed the "UI" from "InitialiseUI()"
Following code can be used with Yann's Helper Class.
Namespace LightSwitchApplication
Public Class EditableCustomersGrid
Private customersDialogHelper As ModalWindow
Private Sub EditableCustomersGrid_InitializeDataWorkspace(saveChangesTo As System.Collections.Generic.List(Of Microsoft.LightSwitch.IDataService))
customersDialogHelper = New ModalWindow(Me.Customers, "CustomerViewDialog")
End Sub
Private Sub EditableCustomersGrid_Created()
customersDialogHelper.Initialise()
End Sub
Private Sub gridAddAndEditNew_CanExecute(ByRef result As Boolean)
customersDialogHelper.CanAdd()
End Sub
Private Sub gridAddAndEditNew_Execute()
customersDialogHelper.AddEntity()
End Sub
Private Sub gridEditSelected_CanExecute(ByRef result As Boolean)
customersDialogHelper.CanView()
End Sub
Private Sub gridEditSelected_Execute()
customersDialogHelper.ViewEntity()
End Sub
Private Sub EditDialogOk_Execute()
customersDialogHelper.DialogOk()
End Sub
Private Sub EditDialogCancel_Execute()
customersDialogHelper.DialogCancel()
End Sub
End Class
End Namespace -
When I initially try to sign in to iCloud, I get the "Account not verified" screen and I am told to check my email for instructions to verify. No email is ever sent. My ID and password work on all other Apple app's. Why not for iCloud?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?
You cannot connect to iCloud.com from an iOS device, you can only connect from a computer. You can access any of the data in your iCloud account from the appropriate apps on your device (mail, contacts, calendars etc)
-
I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!
That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies -
Hi,
Environment: Windows server 2008 R2 , Sharepoint2010
Getting the below error while uploading a document. Below is the stack trace.
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.GetEditFormUrl(SPWeb web, SPList currentList, SPFolder currentFolder, SPContentTypeId id, String comments, SPFile spfile, String sourceUrl, HttpRequest request)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.GetEditFormUrl(SPFile spfile)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.OnSubmit(Object o, EventArgs e)
at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadExPage.OnSubmit(Object o, EventArgs e)
at System.Web.UI.HtmlControls.HtmlInputButton.OnServerClick(EventArgs e)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Still new in sharepoint, so no idea where to start. Please advice.
Thanks.Hi Alex,
Do you have any update?
Best Regards,
Eric
Eric Tao
TechNet Community Support -
when I open Firefox outside of the safe mode I get a constant sound of the "Pac Man" game playing over my speakers
== This happened ==
Every time Firefox opened
== todayhelp! when i open firefox I get the pac-man game sound and I can't get it to stop and I can't find it. I ran trend micro and avg9.
Is it malicious? can it dump or damage my data?
How do I finally remove it?
what is it anyway??
Thanks for your help. -
Starting NON-stand alone oc4j in debug mode
I have set up OC4J (in Application Server 9.0.2.0.0, NOT is stand-alone mode) and I want to start it in debug mode in order to watch some jdbc leaking connections. Which is the way? Is it done through the Enterprise Manager WebSite? All the documentation I have reached is about stand-alone mode.
Thanx in advanceAndreas,
Did you try to add the debug option in OEM (Enterprise Manager WebSite) via OC4J Home > Server properties > Command line options?
Cheers,
-lars
Maybe you are looking for
-
Form acting as child in parent child reference
Hi guys, I have a custom fields form. This form basically uses other forms in our systems information as a parent-child relationship. It uses FORM NAME and ID from that form name to query custom fields form i.e. If you go into for example a customer
-
Hi. There is a 3 column div layout on a page. I have one to float left 10% wide, one to centre 80% wide and one to float right 10% wide. This seems to be fine. I want to put a vertically repeating background in the left and right divs. I have done th
-
Serial Number for adobe photoshop elements 13
ok, i feel like a big dumb stupid, i can't seem to locate the serial number
-
Restore from backupset question
Hi, I have a backup as backupset and i need to restore it to see what the data looked like in the past. Is it possible to restore the backupset as another instance? I have two instances on the same server: mdok (production database), mdokestudio (tes
-
Disable Purchase order scheduling screen
Hi All, While creating a sales order for third party item, immidiately after entering material number & quantity, system giving a second screen as "Purchase Order Scheduling" for each item. We are having 3 option inthis screen such as "compete del,