TS4003 everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?
everything else works on my iPhone in iCloud but when I try to connect to iCloud on safari I get the page ICloud set up iCloud on this device etc. What's up?
You cannot connect to iCloud.com from an iOS device, you can only connect from a computer. You can access any of the data in your iCloud account from the appropriate apps on your device (mail, contacts, calendars etc)
Similar Messages
-
time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!
Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??
-
I can connect my iPhone to my work wifi but when I try to connect my IPad it will not connect. It says safari can not open page. What's up with that I have used IPad connected to work wifi before
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Someone gave me a airport express router. it works great with my macbook but when i try to connect via wifi to my iphone it says it can't be set up by "this software". Where can I download whatever software my iphone needs so I can get wifi?
Per chance is your AirPort Express Base Station (AX) an 802.11g model? If so, that is why you are getting this error message from the AirPort Utility running on the iPad. You would need to use either version 5.6 or 5.6.1 running on a Mac or a PC to administer this base station.
-
My PC died and in turn so did my main iTunes library. My iPhone was synced to the library that is gone. Now when I try to connect to another library, it tells me the phone must be wiped clean before I can manage music with new library. Any way around that? I don't want to lose the music that is on my phone. I am looking for a way to tell the phone to "forget" the old library and let me start working with a new library.
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy of your computer to put everything on the new one.
It sounds like you have failed to do this, which is not good at all.
You will have to transfer your itunes purchases from your iphone. Authorize your computer for your itunes account
About iTunes Store authorization and deauthorization
Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars. So do NOT sync yet. This is why a backup copy is so important.
Enter one unique contact and calendar entry on your computer.
When you first sync, you should get the option to merger the data. Choose it.
If you want your pics, then you will need to e-mail them to yourself before you sync. They will not be of the original quality as they are reduced when synced to iphone.
When all is as goos as it can be, then backup your computer, and always maintain the backup. -
I reinstalled acrobat 8 on my computer but when I try to print to a pdf it states that the program isn't activated. I tried to install and reinstall it but it still doesn't work. It shows that it is activated. I tried to deactivate and reactivate but that doesn't help either. Everything else seems to work.
Hi tspcat,
What operating system are you using, and what version? You may be running into a compatibility issue between your older version of Acrobat and the OS that you're running.
Please let us know a bit more about your setup, so we can get to the bottom of this printing issue.
Thanks,
Sara -
i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks
sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices. -
I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help
Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.
-
my sons iphone 4s is saying "disabled connect to iTunes". but when I try to connect it to iTunes I'm prompted that the phone is locked and needs to be unlocked in order to connect to iTunes. What can I do? b
Hello becca0523,
The steps detailed in the article linked below can help restore access to your iPhone.
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/HT1212
Cheers,
Allen -
I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?
Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.
-
i have purchased a iphone 4s second hand used and when i tried to update its software, it is asking for apple id . i dont have contact with the person to whom i have purchased this device now what should i do
You can't do anything. You have encountered the activation lock. Unless you have some sort of contact with the previous owner you have bought a very expensive paper weight.
You can find out more about activation lock from Apple's site here: Find My iPhone Activation Lock - Apple Support -
When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message
Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod. -
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay? If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry -
I downloaded podcast from a polish radio site. They are fine and working on my macpro but when I try to copy them to my ipod I get a massage that " this podcast can not be played on this ipod" . what can I do?
Or because the episodes are video but are in a format which plays on iTunes but not on an iPod Touch. Only the originator of the podcast can do anything about that.
-
I am in turkey. Just bought a new Turkcell SIM card for my iphone3gs. When I try to connect to Turkcell network, it says that the selected network is restricted however the sim works in ordinary phones. Can you help please.
If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked. I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed. eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money. I sell phones for a living and this happens a lot
Maybe you are looking for
-
How can i call a CGI script from java?
The subject pretty much says it all. I want to call a perl cgi script so i can read from/write to files on a server. I don't know how to sign applets and this would be the easiest way for me, if someone could please tell me.
-
WD Livewire 200 - Return from holiday, and now they wont sync up.
Hi there. I've been using my WD Livewire 200 kits for years, one in the bedroom where the router is (i know...**bleep** australian housing?) and one in the study - which is supplying internet to my and my wifes office PCs. We've just returned from a
-
I am attaching two vi's and an .mdb access file. The viewhistory.vi fetches data from the .mdb file and plots the graph.(supporting vi -->authentication table read.vi) The problem which i want to correct in the graph plot is that, the points are very
-
Copy planning for cost center Runtime error
Dear Gurus, I am running KP97 to copy planning for cost center. but I got following runtime error: =================================================================== Runtime Errors DYN_CALL_METH_CLASS_NOT_FOUND Exception CX_SY_D
-
I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic."