When the User Exit USEREXIT_PRICING_PREPARE_TKOMK gets triggered?

Hi All,
Could you please let me know when the following user exit gets triggered?
USEREXIT_PRICING_PREPARE_TKOMK
Is it before the Pricing?
or
After the pricing?
Is it like Pricing uses TKOMK structure for calculating the Pricing?? Please help me....
Thanks,
Babu Kilari

Thanks for the replies..
I would like to know when this gets triggered, because in the structure TKOMK, i tried to change the value of KALSM(Pricing procedure) and clicked on carry out new pricing.
But, the new pricing is not updated with the updated pricing procedure.
Please let me know if I am going wrong.
Your inputs will be appreciated on this.
Thanks,
Babu Kilari

Similar Messages

User exit that gets triggered at the press of 'Enter' in IW42

Hi,
Is there any user exits that gets triggered at the press of Enter key in PM order confirmation IW42 transaction. Basically the requirement is to give a customized message at the order confirmation screen when the enter key is pressed.
Regards,
Prabaharan.G

Hi,
You may try the following enhancement points and exit respectively.
CMFU0001 E EXIT_SAPLCMFU_001
CMFU0002 E EXIT_SAPLCMFU_002
Pls reward points if useful.
Regards,
Renjith Michael.
Edited by: Renjith Michael on Jan 12, 2008 12:57 PM

When the User exit EXIT_SAPLL03T_002 would be triggered?

Hi All,
When the User exit EXIT_SAPLL03T_002 would be triggered?
As per my understanding which would be triggered while confirming the transferorder (LT12). but In which conditon it will be triggered?I am unable to find out. if any one find the solution please pass ur inputs ASAP.
thanks in advance,
chandran.

Hi,
WHen the "Update SAPML03T transfer orders" is done..This user exit will be triggered..
Since the user exit is in a update module..If you put break-point it will not stop...
Enable the UPDATE DEBUGGING..It will process all the update modules..
Check when the FM L_TA_QUITTIEREN is called....You can debug through your code..
Thanks,
Naren

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

User exit not getting triggered while creating the vendor

Hi all,
I wanted to extend the idoc(crermas01) according to my reqiurement.
But when I am trying to create a vendor using the IDOC cremas01 the user exit EXIT_SAPLKD01_001 is not getting triggered.
Can anybody tell me the reason why it is happening so...........
Thanks and regards,
Vinil.

Is your Idoc generated after the execution?
Where is you break-point, it is inside EXIT_SAPLKD01_001. Please note FM EXIT_SAPLKD01_001 will not be called unless it is implemented using project (CMOD) and project is active.

User exit which gets triggered when a line item is deleted in va02

Hello all,
I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

Hello,
Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
BR
Sudhakar.

User Exit not getting Triggered in Quality Server

Hi,
In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
which is getting triggered in Development server.But when I moved it to Quality,
The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
and that in turn is assigned to Project, still the problem persists.
Can any one suggest me what could be the problem.
Regards,
Kiran B.

Kiran,
Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
<b><REMOVED BY MODERATOR></b>
Satish
Message was edited by:
Alvaro Tejada Galindo

User-exit not getting triggered in VA32

Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.

Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks

User Exit RV60AFZZ not Triggered When Processing IDOC

Hi,
I'm writing to seek some advice on why is the user exit RV60AFZZ not getting triggered when I do a vf01 bdc inside my inbouund IDOC function module. But when I try SHDB the user exit is getting triggered normally.
Thanks,
Mawi

Hi,
Yes I'm creating invoice using delivery orders, inside the idoc function module I'm using bdc call transaction vf01 but somehow it does not trigger the user exit.
But when I do manual vf01 in sap, the user exit is getting triggered.
I cant figure out why this is the behavior of sap.
Regards,
Mawi

Triggering of the User exit MWMTO012 (EXIT_SAPLL03A_012)

Hi,
Please let me know when the User exit MWMTO012 (EXIT_SAPLL03A_012) is going to trigger. This exit is used for Transfer Order split.
Thanks,
Ranjan

Hi,
Just test it :
SMOD -> Put a break-point in the ZX* prog and activate.
Then run a LT* txn and check .
( You can easily go back if it doesn't do the job ! )
Regards,
Erwan

To determine the user exit name from teh transaction code (va02)

hi folks,
when i change teh partner number of ship to party and if i press teh SAVE button a user exit is getting triggered , i want to find out teh name of that user exit thats getting triggered as soon as i press that SAVE button .........the transaction code is va02
thanks in advance,
rajeev

hi rajeev,
try this link.
http://www.erpgenie.com/abap/code/abap26.htm
Regards...
Arun.
Reward points if useful.

Problem while calling the user exit

Hi All,
In one of the program one user exit is called. Before this user exit ther is one FM . If I copy the same function module with a new name Z* , this user exit is not getting triggered. The program is going till the point where CALL CUSTOMER-FUNCTION '001' IS written but after that it's not going inside the user exit. But if I put back the original FM , this suer exit is getting triggered and it's gong inside the exit. I've activated the Project for this user exit also. As per our requirement I've to copy the original FM into Z* FM.But my doubt is when I put back the original FM , this User Exit is getting triggered whereas when I copied this FM it's not working .
Anybody could helpme out why it's happening ?
Thanks
Alok

Srinivas,
Yes it's related to the other post where I had to copy one standard Function Pool.While copying the function pool I copied the FMs also.This problem is coming out of one FM ,when I changed this to Z* at the place where it is called, the user exit which is written inside that FM is not getting triggered even though program is reaching till the point where this user exit is called .
Any clue ?
Thanks
Alok

To determine the user exit name from teh transaction code

hi folks,
when i change teh partner number of ship to party and if i press teh SAVE button a user exit is getting triggered , i want to find out teh name of that user exit thats getting triggered as soon as i press that SAVE button .........
thanks in advance,
rajeev

hi rajeev,
try this link.
http://www.erpgenie.com/abap/code/abap26.htm
Regards...
Arun.
Reward points if useful.

How does the user exit of validation rules get triggered?

SPRO
FinancialAccounting> GL Accounting > Business Transaction > GL posting > Carry out doc settings > Validation in accounting docs
Here you can specify rules and call user exits also.
To add code into the user exit, we have to copy the standard program that contains this user exit and then create a z version?
If so, where do you tell to branch into the custom z program and not the standard program?

Go to transation GGB0(Change Validation), Go to Application Area/Time -> Financial Accounting -> Line Item. Create a validation what ever you want and add the steps/rules for that. You have a provision to give Rules/Exits(User Exit).

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

When the User Exit USEREXIT_PRICING_PREPARE_TKOMK gets triggered?

Similar Messages

Maybe you are looking for