When viewing the Contact Certificates, I can see the Import option, but I do not see the option to actually save the Certificate from the original email.

The title pretty much explains it. In Outlook 2013 when I add a new contact, their certificate is not getting added to their contact page. When I look at the contact certificates section, it is blank with only import as an option.
I have been able to export a cert from the email and then import it to the contact but it says "Persona not validated"
Thanks for any insight you may have.

In Outlook 2013 when I add a new contact, their certificate is not getting added to their contact page. When I look at the contact certificates section, it is blank with only import as an option.
Yes, this is the behavior when you didn't import any Locate Certificate into Outlook contact item. How you export the cert from email? A bit more exact steps how you got to this point would be helpful.
Thanks,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Similar Messages

TS1702 My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.

After last icloud backup, unrequested by me public holidays in the UK have been marked on the calendar and I can't find how to delete this. Also, I have been trying to delete a birthday from the same calendar for months and it keeps reappearing.

iPad 2 with iOS 7.01 After the last backup to Icloud, unrequested by me, my calendar has been filled with public holidays of the UK which there doesn't seem to be any way of deleting. Also, I have been trying to delete a birthday from the calendar for months, this time using all variations of 'delete' and it keeps popping up again!

Are you also restoring from your backup? That sounds like what is happening or someone else has your Apple ID.
A backup to iCloud would have no way to add UK holidays to your calendar. Open Calendar, tap on Calendars at the bottom middle of the page and untick the ones you don't want.

TS2776 Every time I go to play a video on itunes, the itunes site shuts down. I can play music all day, but it will not play a video anymore. This has happened in the last two weeks.

Can anyone help me with this problem. Every time I click a video to play it itunes tells me it is shutting down. I bought a new monitor last week and thought it might be a resolution problem so I hooked up the old monitor and it still told me the same thing. Not sure what the problem is, can anyone help me PLEASE.

Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Hello, I added my library according to the documentation but still do not see your changes?

Hello, I added my library, class according to the documentation, com.sap.mobile.platform.client.openui.extensions, but still do not see your changes, for what? Is this the correct place, what I'm doing wrong? I would like to hide the action bar when the application Agentry, will be launched. Can someone give me examples of your changes in the UI Agentry platform androich, some screenshots, files, source? Documentations? Thank you.

Lukas,
Open UI is not designed to give you that level of control over the application. You cannot hide the action bar on the Agentry client through Open UI. Nor would you want to as the client assumes it will be there and uses it.
Open UI will allow you to extend a field control so for example instead of displaying a string field you could instead write code to display a slider control. There are a set number of fields you can extend through OpenUI.
I suggest looking at the source code that comes with the Open UI SDK and the associated Agentry project for how this works and is implemented in the definitions.
--Bill

I work for a retailer who sends out e-receipts as pdf attachements. When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment. Any ideas?

i work for a retailer who sends out e-receipts as pdf attachements. When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment. Any ideas?

i have scrolled left, right, up and down on iphone4, iphone5 and ipad and the attachment simply does not exist. It has to be something with the apple mail client setup because for any mail client, if they go to the webemail thru safari, the attachment is there and it can be viewed without issue.
I know there are plenty of people out there with this issue with the mail clients set up that you access thru the email icon on the iphone and ipad but i cannot find anyone with a resolution. I cannot find any settings in the mail client setup that has anything to do with attachments or for what attachments can or cannot be read or seen.
Hopefully someone out there has figured something out because this is an odd one.

HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

You are very welcome...there are many little boxes to check/uncheck...can be a real challenge to read all of the fine print

HT1918 Hello! Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3).

Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it.

Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it.

HT4759 When I make a new contact on my iphone they go to icloud, but they do not go to my PC (they have in the past)

When I add contacts to my iphone they move to icloud, but the contact does not move from icloud to my pc (like they have in the past). I have check settings and they seem fine. What else can I do?

Go through the troubleshooting steps listed inder "Troubleshooting iCloud Contacts update or setup issues with Microsoft Windows (Microsoft Outlook)" in this article: http://support.apple.com/kb/TS3998. In particular, make sure the iCloud add-in is active within Outlook.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

TS1702 help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

Hi melbernai - not sure if you've solved this problem yet. I had the exact same problem recently with my 2nd Gen iPod Nano. I solved it yesterday by simply updating iTunes to the most recent version, after which I could get rid of the register screen. The only other thing I needed to do to add my custom playlists was select "Manually manage music" on the screen for my iPod, since it had been in an automatic synching mode since the problem occurred.

Hello, i use premiere pro cc and i would like to uplaod my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?

Hello, i use premiere pro cc and i would like to upload my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?

Oh i'm not sure they are on same, i downloaded speedgrade this morning and i didn't upgraded premiere so it's maybe this ! thanks i will try it and let you know

When viewing the Contact Certificates, I can see the Import option, but I do not see the option to actually save the Certificate from the original email.

Similar Messages

Maybe you are looking for