When will iLife'09 come out & when will it be included in the leopard disk?

I'm about to purchase leopard, but since it's so close to the new year, I started thinking about iLife. If I got leopard now, then iLife would be out in no time and I would have to spend another $80 to get the update. But if I waited a little bit, I could get it with iLife'09 already installed on the disk. So when exactly will the new version of iLife be out, and more importantly, will it be included in the disk immediately (once they ship of course) or will there be a delay? Or will they not even include it in Leopard and wait until Snow Leopard comes out? Please and thank you.

Hi basstome97;
The fallacy in your plan is that iLife is not part of Leopard. So it doesn't matter when you buy Leopard you will not get iLife. In order to get any version of iLife you have to buy it.
Allan

Similar Messages

  • I'm just wondering when IOS7 will come out for Ipod 4th gen. because half the free apps need the new IOS!!

    I'm just wondering when IOS7 will come out for Ipod 4th gen. because half the free apps need the new IOS!!

    Some apps have older versions available.
    Try this if you want an App that says you need iOS 7 or later:
    Go to iTunes on a computer or on a device running iOS 7 and find the app you want and download it using your Apple ID and password.
    Now go back to your iPod Touch Gen 4 and go to the App Store and tap updates at the bottom right, then tap Purchased at the top.  Find the app on the list that you just downloaded on the computer (or other device) and tap the cloud to download it.  If it has an alternate version available that is compatible with your iOS, it will prompt you and allow you to download that.
    Source: http://support.apple.com/kb/ht5919

  • Verisign announced a new CA certificate in October 2010, Verisign Class 3 Secure Server G3. When will this be included in the CA list of the browser? It is in other browsers already (IE, Safari, etc)

    Verisign announced a new CA certificate in October 2010, Verisign Class 3 Secure Server G3. When will this be included in the CA list of the browser? It is in other browsers already (IE, Safari, etc), yet in Firefox you're currently prompted with a security warning for a trusted CA.

    That is one of the intermediate certificates that VeriSign is using. Intermediate certificates are part of the chain that is formed by the web server certificates and build-in root certificates. Such an intermediate certificate needs to be send by the server and is not included by default in Firefox. Firefox will store such an intermediate certificate for future use when a website sends it.
    See https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1130

  • New PS/LR bundle for 9/17: I have PSCC subscription. Will I be included in the new bundle?

    I have subscription to PSCC. Will I be included in the new bundle that has LR which is being released on 9/17

    [Moved from Forum Comments forum to Cloud forum]
    See http://forums.adobe.com/thread/1290660
    From the FAQ: http://www.adobe.com/products/creativecloud/faq.html#pslr-bundle
    This applies to your membership:
    Customers who have already joined a Creative Cloud Single App membership for Photoshop at the $9.99/month level (or corresponding local pricing matching the pricing provided in the question above) will be automatically transitioned to this new program when it ships in a few weeks, with the additional benefits and lower ongoing price

  • My users folder has 140GB used on it, but I cannot find where it is getting that calculation. I went through all of my folders and opened them all in an info panel, and they all come out to about 30GBs. Where is the rest of the data? -Using Mountain Lion

    My users folder has 140GB used on it, but I cannot find where it is getting that calculation. I went through all of my folders and opened them all in an info panel, and they all come out to about 30GBs. Where is the rest of the data? -Using Mountain Lion

    First, empty the Trash if you haven't already done so.
    Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click the line of text below to select it, then drag or copy — do not type — into the Terminal window:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Press return. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • NEW to TIME MACHINE - if files deleted, will it be missing in the hard disk

    i probably know that this is a silly question but here goes:
    i've backup my hard drive into my external hard disk using a time machine.
    if, i deleted the files in my mac. will it be missing in the hard disk too?
    because, i am already low on space and would really want to delete my important files that already backed-up.
    thanks!

    fsug2 wrote:
    i've backup my hard drive into my external hard disk using a time machine.
    if, i deleted the files in my mac. will it be missing in the hard disk too?
    YES! Not immediately, but sooner or later, Time Machine will delete it's copies of things that are no longer on your system. See #20 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    Depending on the circumstances, the copies may be deleted in as little as 24 hours.
    because, i am already low on space and would really want to delete my important files that already backed-up.
    Backups, especially Time Machine backups, and extra space are two very different things.
    Your best bet is to get a larger HD for your Mac, so you can keep all the originals there.
    Second best is a another external HD; copy some things to it and delete them from your Mac, and let Time Machine back up both your internal and the new external.

  • After updated to ios7. my iphone 4s get warm on my iphone and i go to app store to download something that i purchased from the app store...it didn't come out anything. please tell me why or the iphone updated wrong

    after updated to ios7. my iphone 4s get warm on my iphone and i go to app store to download something that i purchased from the app store...it didn't come out anything. please tell me why or the iphone updated wrong. please tell me why it happens like this. thank you

    after updated to ios7. my iphone 4s get warm on my iphone and i go to app store to download something that i purchased from the app store...it didn't come out anything. please tell me why or the iphone updated wrong. please tell me why it happens like this. thank you

  • I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. I have put the leopard disk into the drive and all it does is make a weird noise and then spits the disk right back out. It doesn't do this with other disks. HELP

    I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. When I put the leopard disk into the drive all it does is make a weird noise and then spits the disk right back out. It doesn't do this with any other discs, only this software. Is it still possible to update this computer?

    Yes. Try Amazon.
    Before you do upgrade to Snow Leopard, make sure your Mac meets the requirements.
    Mac OS X v10.6 Snow Leopard - Technical Specifications
    Make sure the disc you tried using doesn't have any fingerprints or smudges on it. The optical drive can't read the disk otherwise.
    If your Mac won't read the disc, might be a good idea to rule out any problems with the startup disk BEFORE trying to upgrade the system.
    Using Disk Utility to verify or repair disks
    Message was edited by: Carolyn

  • How do i find out what numbers i have included on the find my phone app?

    how do i find out what numbers i have included on the find my phone app?

    Sorry, but what do you mean by "what numbers I have included"? Find My iPhone doesn't store nor go by phone numbers, if that's what you're referring to. It's done by the Apple ID you used to set up Find My iPhone on the device you wish to track, and the devices will be shown by name.
    You may need to explain further what it is you're asking or are trying to accomplish.
    Regards.

  • When will iLife 13 come out and will iLife 11 be upgraded if purchased today

    ANyone have an answer to iLife question?

    The standard terms for the app store are that the "old" version will be pulled if/when a new upgrade version (e.g. from iLife 11 to 13) will be offered and that you will need to buy it again.
    If you purchase the retail disk, then you can use that as long as it will be compatible with the OS you are using; however, if you decide you want iLife 13 from the app store, the same rules as above will apply. So, either use your retail disk as long as you want/can or go with the app store's terms and keep buying new versions.

  • How do I eject a dvd disk that will not eject when I highlight it and click the eject disk in finder, has anyone had this problem?

    How do I eject a dvd disk that will not eject after I have highlighted it and clicked the eject disk in finder file menu?

    Complements of Kappy:
    Try:
    1. Restart the computer and after the chime press and hold down the 
    left mouse button until the disc ejects.
    2. Press the Eject button on your keyboard.
    3. Click on the Eject button in the menubar.
    4. Press COMMAND-E.
    5. If none of the above work try this: Open the Terminal application in
    your Utilities folder. At the prompt enter or paste the following:
    /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • WhenI print from firefox on a Mac everything comes out 50% too light, if I save the image and print from the desktop it looks fine. No problem either printing from FF with Win7. How do I fix FF on the Mac?

    My iMac runs bootcamp, so I have both OSX and win7 available. I run the latest Firefox on both as my primary browser. The printing looks like the ink is running low, but when the same image is printed from other desktop apps the printing looks fine.

    Hi, Jordan -
    Welcome to Apple's Discussions.
    If the original drive in the newer Mac is a Western Digital, its jumpers may be set to Single, which WD drives often use when there is only one device on the bus. When a second drive is added, the jumpers on the original must be reset to Master.
    OS 9's utility is named Drive Setup - you should find it in the Utilities folder on the hard drive. Run that. Select the added hard drive in the list, then select Mount Volume from the Functions menu.
    You can also check with that utility to see if the OS believes the drive has been set to automount at boot. Again, select the drive in the list. Then select Volume Settings from the Functions menu - there's a checkbox in that screen to set automount (for freshly initialized drives, that's turned on by default).
    Also, try running Disk First Aid (should also be in the Utilities folder). Let it have a look at the second drive, and repair anything it can.
    Apple System Profiler should report the format of all drives it sees. Is the format of the drive from the old Mac stated as Mac OS Standard, or as Mac OS Extended?

  • Everytime my computer comes out of standby it no longer recognizes the GPIB-USB.

    When the computer comes out of standby or hibernation I get a message saying that there is an unknown device on the USB port. Then I have to unplug the GPIB and plug it back in. Then the New Hardware Found Wizard starts up and I have to install the software again. Can this problem be fixed?

    After a bit of searching through MSDN help, I found the SetThreadExecutionState command in the kernel32.lib. If you invoke SetThreadExecutionState(&H80000001) on entry to your application, you will prevent the OS from entering standby autonomously from an idle state. A user initiated standby, though, will override this. The application should issue a SetThreadExecutionState(&H80000000) on close to ensure for good housekeeping.
    If you want the system to query the user before entering a user-initiated standby, then your application needs to intercept and respond to the WM_PowerBroadcst message fired by the PBT_APMQuerySuspend event. You will need to subclass your main application and respond to the event by returning a BROADCAST_QUERY_DENY from the wind
    ow message loop. Go to this URL for the relevant code fragment in VB: http://www.freevbcode.com/ShowCode.asp?ID=2596
    Larry E."

  • My iMac will not boot up from the Leopard upgrade disk nor will it eject it.

    My iMac is very slow and sluggish.  Followed online instructions to use the Disk Utility to run repair.  After doing so it told to reboot my system from the install disk and then run the Disk Uitility to run repair from it.  I put in my Leopard upgrade disk and tried to reboot.  I get the chime and  the Apple logo and hear the disk trying to be read, but after about 5 minutes my iMac shuts completely off.  I have tried to eject the disk using all the methods found in the community and nothing works.  I want to try my orignal Mac OS X install disk to see if that works.  My computer is about a 2007 model.  It worked great until just a couple days ago.  Frankly I can't afford to take it in so I will have to figure this out on my own with your help. :-(

    I cannot open terminal.  When booting I get the gray screen with the Apple logo and the twirling comb goes for a while and shut the computer completely off.
    I got into the single-mode user and learned the following: disk1s3: I/O error.  SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00. 
    Singleuser boot -- fsck not done
    Root device is mounted read-only. 
    If you want to make modifcations to files: /sbin/fsck -fy
    /sbin/mount -uw /
    I typed in the drutil eject and got:
    SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
    Library not loaded.  Reason: not suiteable image found. 
    It did find:
    /system/library/rivateframeworks/installserver.framwork/versions/a/installserver :  unknown file type, firfst eight bytes: 0xCA 0xfe 0xba 0xbe 0x00 0x00 0x00 0x04 Trace/BPT trap.
    I have tried holding the left mouse key, the eject key and nothing happens.  To bad I can't pull the
    thing out with tweezers. 
    So where do I go from here?

  • TS2610 'VOB_DATA.LAY' Warning: The file 'VOB_DATA.LAY' found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc. Warning: The file 'YOU_GOT_TO_BE_KIDING_.layout' found in the VIDEO_TS or HVDVD_TS folder will not be included in the f

    I have been fighting this file  witch came up out of no where for the first time ,if i could understand whats going on maybe i can burn a dvd Help !

    Looks like you are making an HD DVD...a format that lost the high def disc wars.  Only Macs with Superdrives and discontinued JVC HD DVD decks can play this format. 
    You need to make an SD DVD...I'll post the steps for that in a bit. If you want a high definition disc, you'll need a BluRay burner, and software like TOAST to burn it.
    #42 - Quick and dirty way to author a DVD
    Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
    The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
    1. Export a QT movie, either a reference file or self contained using current settings.
    2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
    3. Select the left blue one and hit delete.
    4. Now, select the green one, right click on it and select the top option "first play".
    5. Now drag your QT from the browser and drop it on top of the green monitor.
    6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
    7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
    THATS ALL!!!
    NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing.  Then take THAT result into DVD SP and follow the rest of the steps.  Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Maybe you are looking for