Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up

Problem summary: Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up.
In a different help forum someone told me that the autocomplete (autofill) feature of my browser is enabled. Seems that it is set to save autocomplete data for forms and/or usernames/passwords. I need help with the steps necessary to disable this feature.

Similar Messages

Tetris always starts with the same blocks

Has anyone else noticed that the first game in Tetris after launching it always starts with the same blocks? For me, it always gives me the red "Z" block, the yellow square, the green "Z", orange "L", purple "T", blue straight block, blue "L", and so on. Every time. Without fail. And although my second game starts with something different, all second games always start with the same sequence too (purple "T", orange "L", yellow square, green "Z", red "Z", and so on).
Seems to me like whoever wrote the random number generator used by Tetris did a very poor job. Hopefully EA creates a version 1.1 to fix this, and Apple makes the update available for free to people who already bought Tetris. I find it hard to believe that something so obvious made it past QC.
PowerMac G5 Dual 1.8 Mac OS X (10.4.5) 5G iPod 60GB

Definitely agree about the need for a 1.1 update. The random generator and also the fact that, on my iPod at least, if I am listening to music and playing at the same time, whenever there is a change in tracks, the game locks up for a few seconds and I can't see the piece and it ends up dropping some place unexpected. This desparately needs to be fixed as many a 12th level game has been ruined because of this.

Starting with the same folder automaticaly any time opening bridge

Hello everybody, is it possible to configure adobe bridge that way that each time I open it bridge is going to start with the same folder? Or can I tell bridge to use the folder that was opened when closing bridge the last time?
Thank you very much for your help.

Bridge always points to the last folder location that you used. So, each time you open Bridge, it will start with the same folder location.
However, this can be reset by resetting Bridge preferences. Resetting Bridge’s Preferences « Julieanne Kost's Blog
~ Arpit

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty. Today, after only eight months starting with the same problems ! I read online that some mac products in 2011 wer

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty.
Today, after only eight months starting with the same problems !
I read online that some mac products in 2011 were put on the market defective , you can get a warranty extension or even a replacement mac?

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

HT4623 I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

HT204053 I am looking at purchasing an iphone and we have a ipad and ipod at home all under the same apple id. I would like my daughter to have a seperate id then myself for signing in for itunes, etc...what do I need to do to make this happen.

I am looking at purchasing an iphone and have an my daughter has an ipad at home and I want to have seperate apple ids when we use them and download and such.. What do I need to do?

If you want her to have a new iTunes account then there are instructions on this page for how to create one : http://support.apple.com/kb/HT2731
Or if you don't want to give credit card details then follow the instructions on this page when creating the account : http://support.apple.com/kb/HT2534
You can then use that account on the phone (Settings > iTunes & App Store for the stores, Settings > iCloud etc)
All of your downloads from your existing account will remain tied to that account. If you want to use the same computer for syncing then you can do do, you can have more than one account authorised on a computer's iTunes (Store > Authorise This Computer menu option), but only one account can be logged in for purchasing/downloading. But if you use iTunes Match, automatic downloads or redownload an account's past purchases then you may tie that computer to that account for 90 days : http://support.apple.com/kb/HT4627 - so you won't be able to do any of those three things on a different account until the 90 days have completed (it shouldn't affect being able to make new purchases)

Reading an initial letter from a line in java and printing the word starting with the initial letter

suppose this is a string in java char str[]="this is the future" my program should work like this
it should check the initial letter in this case 't' and print the words
output should be this the

I think you can better ask this in a Java forum. This forum is about the Small Basic programming language.
Jan [ WhTurner ] The Netherlands

Pops up with all the names starting with the first letter of their name I get contact error or undefined message essage either undefind or contact error. How can I correct this?

Some times after along while it will work properly. I use AOL as my
home page. When I go back to using Internet Explorer everything works fine.

cor-el, thank you, followed your instructions, working fine. I like firefox a lot, but was getting frustrated trying to forward e-mail. Always had to go back to internet explorer which is so much slower. I owe you.
Thanks Again,
lujog

My mac book air keeps starting with the same programs and does not save changes made such as dock preferences, my mac book air keeps starting with the same programs and does not save changes made such as dock preferences

every time i boot is like groundhog day, i keep getting the same programs and system settings that either have closed or modified, like dock magnification, programs saved on the dock, etc.

every time i boot is like groundhog day, i keep getting the same programs and system settings that either have closed or modified, like dock magnification, programs saved on the dock, etc.

Problems signing into MSN Hotmail

I just recently started having problems signing into MSN Hotmail when using Safari. The strange thing is that I'm able to access it with Firefox and also with the built in mail program on the dashboard. Just a few moments ago I wasn't even able to access the MSN.com webpage from Safari.
This seems very odd. I had no problems up until a few days ago.
Anyone else having these issues??

Thank you for the suggestions.
It actually started working spontaneously for some reason. I will try above steps should it happen again.
thanks again,
Eric

I cant login on any of my Apple ID I know there correct but whenever it loads it doesn't work it goes back to sign in when I try it on my setting it is the same thing

I cant login on any of my Apple ID I know there correct but whenever it loads it doesn't work it goes back to sign in when I try it on my setting it is the same thing

Hi go to itunes bottom of page delete Apple ID then try & sign back in . Cheers Brian

HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
can anyone help me to solve this issue

i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating. I have been asking and no one knows what to do.

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Getting Started with the BlackBerry Classic

Reposted from the Inside BlackBerry Help Blog
Whether you are new or experienced with BlackBerry 10, here’s a quick guide to get you started with the BlackBerry Classic!
Step 1 – Insert your SIM and media card
The first step you’ll want to take after unboxing your new BlackBerry Classic is inserting your nano SIM card and media card. When you have your nano SIM and media card (optional) handy, use the tool that is provided in the BlackBerry Classic box to open the SIM card tray.
To do this, push the tip of the tool, or a paperclip, into the hole that is to the left of SIM on the side of your device. Doing so pops the tray out at which point you can pull it all the way out.
After doing this, with the metal contacts of your nano SIM card facing away from you, place the nano SIM into the tray, then push the tray into the slot. Repeat these steps to insert your media card by inserting the tool, or a paperclip, in the hole to the right of SD along the left side of your device.
Tip: If you don’t have the right SIM card please contact your service provider and ask them for help switching to a nano SIM card. Please avoid using a larger SIM card that has been cut to a smaller size as this may cause your device to not recognize the SIM card. Using a modified SIM card may also result in it getting stuck since the modified SIM card may be thicker than the required nano SIM card. When you have finished inserting your nano SIM and media card the next step is completing the BlackBerry Classic setup wizard.
Step 2 – Complete the set up wizard
If you haven’t already, turn on your BlackBerry Classic by pressing and holding the power button on the top of your device so you can complete the setup process. This process guides you through connecting to a Wi-Fi network, setting up a new BlackBerry ID, or signing into your existing BlackBerry ID, as well as showing you several fundamental gestures.
Tip: If you don’t have a BlackBerry ID you’ll be able to create one during the setup process and, in the event you don’t remember your BlackBerry ID password, use the Forgot Password option to reset your BlackBerry ID password. Don’t forgot to confirm your BlackBerry ID, which can help you recover your password in case you ever forget it!
When you have finished the setup wizard, the new and improved Setup app will open automatically.
Within this app you’ll be able to complete the following actions that will help you learn more about your new device and customize everything just the way you like
Find out what’s different about BlackBerry 10
Understand the various gestures used throughout your device
Add your email and social networking accounts
Transfer data from your previous device (See step 3 to learn more!)
Customize your device notifications
Setup BBM so you can connect with family and friends
Set a device password
And more!
When you have finished going through the various options within the Setup App, swipe up from the bottom of the screen to minimize it. You can always access the Setup app in the future by tapping on the Setup icon as well.
Step 3 – Transfer data from your previous device
If you are switching from another device, whether it be BlackBerry OS, BlackBerry 10, Android or iPhone, there are several different methods you can use to help transfer data to your new device.
For a visual overview, check out the following videos that guide you through this process. The Setup app on your BlackBerry Classic can also help you do this, just open the Setup app, tap Switching Devices and follow the provided steps.
Android device to BlackBerry 10 smartphone
BlackBerry OS smartphone to BlacKBerry 10 smartphone
iOS device to BlackBerry 10 smartphone
If you encounter any issues transferring your data, or would like some guidance, stop by the Device Switch board within the BlackBerry Support Community Forums and ask the community.
If you switch from another device don’t forget to perform a security wipe on your old device to remove your personal information. If your previous device was a BlackBerry device, check out our post on how to perform a security wipe.
If you use a different type of device, review the user documentation to learn how to reset it to factory settings and remove your personal information.
Step 4 – Secure your new device and turn on BlackBerry Protect
If you haven’t already set a device password, I cannot stress enough how important this is. Doing so can help prevent unwanted access if you leave your device unattended and, in the event you misplace your device, no one will be able to view your personal information. To set a device password, complete the following steps:
On the home screen, swipe down from the top of the screen
Tap Settings followed by Security and Privacy
Tap Device Password
Set the Device Password switch to On
Enter your desired password twice
After setting a device password make sure you verify that BlackBerry Protect is enabled on your device by going to Settings followed by BlackBerry Protect.
When enabled, BlackBerry Protect can help you locate, lock, or wipe your device where you are, provided your device is connected to the mobile or Wi-Fi network. To learn more about BlackBerry Protect go to http://protect.blackberry.com.
Step 5 – Where to learn more and find help
The easiest way to learn more about your new BlackBerry Classic is by opening the Help app, which contains a lot of useful information ranging from tips and tricks to how-to overviews. You can also view, download, or save the user guide for your device by visiting http://docs.blackberry.com.
I would also recommend reviewing BlackBerry Classic how-to demo videos that show the various features and functions offered by your device. These demos can be viewed on your device, computer, or tablet. Several BlackBerry Training courses are also available – make sure you try these out on your computer, or device to learn more about the BlackBerry Classic and BlackBerry 10 OS version 10.3.1.
What's New in BlackBerry 10 OS Version 10.3.1
Introducing BlackBerry 10 OS Version 10.3.1
Supporting BlackBerry 10 OS Version 10.3.1
Introducing the BlackBerry Classic smartphone
Another great way to learn more is by taking the BlackBerry 10 Pop Quiz, which you can find within BlackBerry World. This app offers short quizzes that can help you learn more about your device and it only takes a few minutes to complete each test – it’s the perfect coffee break companion!
To get the BlackBerry 10 Pop Quiz, open BlackBerry World and search for it or click here. Another great resource to learn more about your device, beyond this blog of course, is the BlackBerry Classic support site located at http://www.blackberry.com/classicsupport
If, after reviewing this content you have a question, register and join the discussions within the BlackBerry Support Community Forums or send a tweet to @BlackBerryHelp.
Got a question? Leave a comment and let me know!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

Very nice detailed information about BlackBerry Classic. Looking forward for more updates and also KB's for support.

Whenever I start to sign in (MSN Hotmail), previous addresses come up that start with the same letter as mine. I would like to clear them out so that only mine comes up

Similar Messages

Maybe you are looking for