Wheni vl01n delivery quanity not come from order automatic

when i do vl01n delivery quantity not come automatic

Hi Satyapal
A part from above suggestions , Just check if any open orders are there .
If any open orders are existed system confirm the quantity in sales order level but same delivery quantity will not be reflected in delivery document.
If any open orders are existed make it delivery for those orders or reject those with putting reason for rejection.
Check copy controls in between sales order and delivery.
Hope it will be use full
Thaks &Regards

Similar Messages

How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

How can I install a program that comes in a CD when the iMac does not come with a CD entrance?

Another option if you have access to a second Mac with a drive is to connect the two together with the iMac in Target Disk Mode, Transferring files between two computers using FireWire, and installing from the Mac with the optical drive.
OT

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

FatalInternalException The metadata for type "XYZ" did not come from a file,.....

Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
     <echo message="Schema Create for KODO"/>
     <taskdef name="kodo-schematool"
          classname="kodo.jdbc.ant.MappingToolTask"
          classpathRef="jdo.schematool.class.path"/>
     <kodo-schematool action="refresh">
     <config propertiesFile="${zeus.persistence.jdo.properties}"/>
     <fileset dir="${jdo.metadata.dir}">
          <include name="**/*.jdo" />
     </fileset>
     <classpath>
          <pathelement path="${compile.project.class.path}"/>
     </classpath>
     </kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
Christian

The only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019

Recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it. Can anybody Tell me what problem i am facing???

recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it, it is still going on since 3 hours . Can anybody Tell me what problem i am facing???

Which software did you use to restore it, if you didn't go with iTunes?

Requested delivery date not copied from quote item to order item

CRM 7.0 copying from a quote to an order is ot copying the requested date at the item or header.
For the Header we are using copying routine SLSHDR and for the item SALES
There is a date profile assigned to both the quote & item category, these objects are in the date types.
BILL_DATE                           Billing Date
INVCR_DATE     Billing Document Created On
OPP_DEL_DATE     Requested Delivery Date
ORDERACTUAL     Actual Dates
REQ_DLV_DATE     Rqstd Delivery Date Proposal - Order Hdr
VALIDFROM                           Valid From
VALIDTO                           Valid To
This seems like it should not be so complicated, we are looking at a Badi for the copy rules but has been challenging to say the least. It seems like there should be a way to configure (not code) this issue.

SAP OSS stated functionality not supported, we pushed it back a couple of times. Even though this is out of the box functionality in ECC copying a quote to an order.
Our developer was able to code a solution in method IF_EX_CRM_COPY_BADI~DATES, our ecommerce app calls this function when the quote is converted to an order in ISA.

I have an app on my phone that has a glitch.i want to get rid of the app so that i can re install it,but when i re istall,it comes from the cloud and still has the glitch. how do i remove an app from my cloud

I have an app that i want to get out of my cloud,can i do this ????? It has a glitch and wont work and when i come to re install, it comes from my cloud along with the glitch. Can anyone help ?

When you tap the iCloud download symbol it's downloading a fresh copy of the app from the App Store, not from your iCloud account. (Your previous purchases aren't stored in your iCloud account, they are stored in the App store and can be redownloaded from there.)
If the app still has a glitch, try contacting the app developer. Perhaps there's a problem with the app running with iOS 7.1.

EDI1 price is not coming from ORder ack

Hello Team
we are facing one issue in the system, where when we create PO, EDI1 and EDi2 are coming at the time of order creation ideally EDi1 , EDi2 should update at the time of order conformation, but in our system EDi1 comes from the last vendor confirmed price.
This created lot of confusion. can any one tel why this is happening, is this standard SAP or some bug in the system
Sarika

As a std procedure while creating PO price won't be picked from contract. Rather you need to create a PO w.r.t the contract. In that case PO will take the same conditions stored in the contract.
Else if you are working with sourcelist, then you need to define the contract as a source of supply. In this case when you create PO system will pick Contract as source and contract price will appear in PO.

Can not update Adobe Reader as it did not come from Apple App Store.

Can not update Adobe Reader or Adobe Lightroom 5 as they did not come through Apple App Store. Note says I selected not to accept apps other than from Apple. Just started backing up new Iphone and Ipad to Macbook Pro. Is there a setting some where that would allow updates?

Yes there is a setting for that. Open system preferences go to the security & privacy sections, click the lock icon and type in your password. Then in the "Allow applications downloaded from: area tick Anywhere.

Delivery is not comming in VT01n

Hi,
I am trying to create the shipment but after delivery in Tcode -VT01N. delivery is not showing up. kindly let me know how can i resolve this problem.
Thanks

Hi Sherry,
Delivery will not appear in the shipment if the route is not maintained in the respective Delivery transport tab. To get the route automatically in the delivery Route Determination needs to be maintained From Source Zone to Destination Zone.
SPRO---> S&D > Basic Function-> Routes ---> Define route and Route Determination ---> Maintain Route Determination.
Secondly Check the document flow is the delivery is all ready is assigned to some other shipment.
Third if the route is assigned to the delivery, is the route is relevant for transportation or not.
Revert if you have any query.
Regards
Durga Sana

Phone makes "morse code" sound when in use, not all the time but quite frequently. The sound does not come from the speakers, infact it comes from the comments inside the phone.

When in use my phone makes a quiet buzzing noise coming not from the speakers but the actual phone. It does not do it all the time but it is quite frequent, my phone is an iPhone 5. Please can you tell me what the problem is?

Make an appointment at the Genius Bar to have it evaluated by the techs there. This is not normal and is probably not something that a user can fix.

TS1389 Advice ascribed to iCloud strain with my music and music didkv not come from iTunes Store became from a downloaded from my computer and if the music does not stream up to the iCloud when I baby give my money back

I only have Iphone 5 16gb which ten GB is music. So if I pAy $24 will this free up those 10 gb

No - iCloud storage does not increase the storage on the device itself. iCloud storage is to increase storage for backups only.
Cheers,
GB

Condition records not copied from order to invoice

Hi,
I created an order and it has contion types for Frieght cost and packing cost...for both condition rocrds were found and triggered in order but whn cheked in invoice...records are not copied to invocie level..and when checked in analysis it says "access not made" for both the conditions...
Fields combination for these are shipping point and material frieght group for both condition types...
i checked the validity dates for both conditions and are still in validity dats.
Can anyone advice me is there some thing else i need to check and why condition records are not copied to invoice.
Thanks in advance
Balu

Hi Sumanth,
Copy controls are fine...it is actually delivery related billing scenarios..and in delivery to billing copy contrls in header in determine export dat feild it is set to "B :Redetermine the export data" and at tiem level the pricing type is set to "C:Copy manual pricing elements and redetermine the others"
Kindly let me know if the settings are fine or the problem is woth these settings
Regards
Balaji

Updated 2 iPhones, now both my contacts and wires are joined and when I text her it comes from herself, ***?

Updated both phones this morning, not sure why but when I text my wife it shows it as coming from her own phone.
Both of our contacts were joined together and when I deleted her contacts from my phone it also deleted them from hers.
icloud ***** !!!!!!!! What a mess

It is no wonder she is not receiving your messages if she has iMessage turned off in her iPad.
For her to receive iMessages on the iPad, she needs to turn iMessage ON in her iPad and then she needs to be connected to the internet in order to receive them. This connection can go through WiFi or through cellular data if her iPad has this functionality, but those two requirements are a must.
1. iMessages ON
2. iPad connected to Wifi or cellular data.

Slow SQL output when table alias is NOT used in order by clause

Hi guys,
My query is based on Oracle 9208
I have a table TAB1 with 68000 records with transaction_id as the primary key in this table (unique index).
I have another TAB2 with the same number of records again with transaction_id in this table (foreign key to above).
I have the below query that gets executed via an application:-
SELECT TO_CHAR(V1.TRANSACTION_ID), V1.POLICY_ID, V1.REQUEST_TYPE
FROM <VIEW> V1 WHERE V1.CERT_SERIAL_NUM=56192 AND
(V1.AUTH_GROUP_ID=0 OR V1.AUTH_GROUP_ID=1) AND ROWNUM <= 3 ORDER
BY TRANSACTION_ID ASC
The above view V1 is created as below:-
CREATE OR REPLACE FORCE VIEW "V1"
("TRANSACTION_ID",
"PARENT_TRANSACTION_ID",
"CA_DN_ID",
"AUTH_GROUP_ID",
"POLICY_ID",
"REQUEST_TYPE",
"REQUEST_STATUS",
"EE_DN_HASH",
"EE_DN",
"EE_EMAIL_HASH",
"EE_EMAIL",
"KEY_USAGE",
"SMART_CARD_SERIAL",
"CERT_TYPE",
"CERT_SERIAL_NUM",
"CERT_INDEX",
"RENEWAL_FLAG",
"ARCHIVE_FLAG",
"TIME_RECEIVED",
"DOWNLOADED",
"REQUEST_DATA",
"ACTION",
"STEP_NUM")
AS
SELECT
T1.transaction_id,
T1.parent_transaction_id,
T1.ca_dn_id,
V2.auth_group_id,
V2.policy_id,
T1.request_type,
T1.request_status,
T2.ee_dn_hash,
T2.ee_dn,
T2.ee_email_hash,
T2.ee_email,
T2.key_usage,
T2.smart_card_serial,
T2.cert_type,
T2.cert_serial_num,
T2.cert_index,
T2.renewal_flag,
T2.archive_flag,
T1.time_received,
T1.downloaded,
T1.request_data,
V2.action,
V2.step_num
FROM TAB1
<ANOTHER VIEW> V2,
TAB2 T1,
TAB2 T2
WHERE
T1.transaction_id = T2.transaction_id
AND
V2.policy_id = T1.policy_id
order by transaction_id;
The query at the top runs within milliseconds if the VIEW is created as :-
order by t2.transaction_id
But without the alias "t2" in the order by, the query takes about 1 1/2 minutes
Can you tell me why? I thought if you ordering by primary key (lesser number of values compared to foreign key values), the query should be faster..no?
Thanks in advance

Thanks for keeping up with this issue Hemant.
Here are the plans for each case.
I would be very interested in how you'd recognize which plan is the best and what are the derivatives.
I don't much (or rather anything!) what is 'card' values, 'cost' values etc which I believe are used to decide the best plan of the lot.
Thanks again
Note TAB1 and TAB2 are from view definition posted initially
1) Execution Plan for VIEW1 <<-- With ORDER BY" clause but no table ailas (order by transaction_id)
SQL> EXPLAIN PLAN FOR SELECT TO_CHAR(QT.TRANSACTION_ID), QT.POLICY_ID, QT.REQUEST_TYPE
2 FROM <VIEW1> QT WHERE QT.CERT_SERIAL_NUM=24293 AND
3 (QT.AUTH_GROUP_ID=0 OR QT.AUTH_GROUP_ID=1) AND ROWNUM <= 3 ORDER
4 BY TRANSACTION_ID ASC
5 /
Explained.
Elapsed: 00:00:01.00
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 3 | 195 | 17 |
|* 1 | COUNT STOPKEY | | | | |
| 2 | VIEW | VIEW1 | 17 | 1105 | 17 |
|* 3 | SORT ORDER BY STOPKEY | | 17 | 38573 | 17 |
| 4 | NESTED LOOPS | | 17 | 38573 | 10 |
| 5 | MERGE JOIN CARTESIAN | | 1 | 167 | 9 |
| 6 | VIEW | VIEW2 | 1 | 52 | 8 |
| 7 | SORT UNIQUE | | 1 | 156 | 8 |
| 8 | NESTED LOOPS | | 1 | 156 | 6 |
| 9 | NESTED LOOPS | | 1 | 143 | 6 |
| 10 | NESTED LOOPS OUTER | | 1 | 117 | 5 |
|* 11 | HASH JOIN | | 1 | 104 | 5 |
| 12 | NESTED LOOPS | | 1 | 52 | 2 |
|* 13 | TABLE ACCESS FULL | TAB3 | 1 | 39 | 2 |
|* 14 | INDEX UNIQUE SCAN | (PK_TAB4) | 1 | 13 | |
| 15 | TABLE ACCESS FULL | TAB5 | 82 | 4264 | 2 |
| 16 | VIEW PUSHED PREDICATE | View3 | 1 | 13 | |
| 17 | NESTED LOOPS | | 1 | 52 | 2 |
| 18 | NESTED LOOPS | | 1 | 39 | 2 |
|* 19 | INDEX UNIQUE SCAN | (PK_TAB6) | 1 | 13 | 1 |
|* 20 | INDEX RANGE SCAN | (PK_TAB7) | 1 | 26 | 1 |
|* 21 | INDEX UNIQUE SCAN | (PK_TAB8) | 1 | 13 | |
| 22 | TABLE ACCESS BY INDEX ROWID| TAB9 | 3 | 78 | 1 |
|* 23 | INDEX UNIQUE SCAN | (PK_TAB9) | 1 | | |
|* 24 | INDEX UNIQUE SCAN | (PK_TAB10)| 1 | 13 | |
| 25 | BUFFER SORT | | 1 | 115 | 9 |
| 26 | TABLE ACCESS BY INDEX ROWID | TAB2 | 1 | 115 | 1 |
|* 27 | INDEX RANGE SCAN | (TAB2_IDX2)| 1 | | |
|* 28 | TABLE ACCESS BY INDEX ROWID | TAB1 | 12 | 25224 | 1 |
|* 29 | INDEX UNIQUE SCAN | (PK_TAB1) | 1 | | |
Predicate Information (identified by operation id):
1 - filter(ROWNUM<=3)
3 - filter(ROWNUM<=3)
11 - access("TAB5"."PATH_ID"="TAB4"."PATH_ID")
13 - filter("TAB3"."AUTH_GROUP_ID"<>(-1) AND ("TAB3"."AUTH_GROUP_ID"=0 OR "TAB3"."AUTH_GROUP_ID"=1))
14 - access("TAB3"."PATH_ID"="TAB4"."PATH_ID")
19 - access("TAB5"."DOMAIN_ID"="TAB6"."DOMAIN_ID")
20 - access("TAB6"."DOMAIN_ID"="TAB7"."DOMAIN_ID")
21 - access("TAB7"."RULE_ID"="TAB8"."RULE_ID")
23 - access("TAB9"."POLICY_ID"="TAB5"."POLICY_ID")
24 - access("TAB9"."ASSOCIATED_FORM_ID"="TAB10"."FORM_ID")
27 - access("TAB2"."CERT_SERIAL_NUM"=24293)
28 - filter("View2"."POLICY_ID"="TAB1"."POLICY_ID")
29 - access("TAB1"."TRANSACTION_ID"="TAB2"."TRANSACTION_ID")
Note: cpu costing is off
54 rows selected.
Elapsed: 00:00:01.81
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 COLLECTION ITERATOR (PICKLER FETCH) OF 'DISPLAY'
Statistics
39 recursive calls
0 db block gets
629 consistent gets
0 physical reads
104 redo size
5169 bytes sent via SQL*Net to client
405 bytes received via SQL*Net from client
5 SQL*Net roundtrips to/from client
31 sorts (memory)
0 sorts (disk)
54 rows processed
2) Execution Plan for VIEW1 <<-- With ORDER BY" clause and table alias (order by TAB2.transaction_id)
SQL> explain plan for SELECT TO_CHAR(QT.TRANSACTION_ID), QT.POLICY_ID, QT.REQUEST_TYPE
2 FROM <VIEW1> QT WHERE QT.CERT_SERIAL_NUM=30003 AND
3 (QT.AUTH_GROUP_ID=0 OR QT.AUTH_GROUP_ID=1) AND ROWNUM <= 3 ORDER
4 BY TRANSACTION_ID ASC
5 /
Explained.
Elapsed: 00:00:10.20
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 3 | 195 | 14 |
| 1 | SORT ORDER BY | | 3 | 195 | 14 |
|* 2 | COUNT STOPKEY | | | | |
| 3 | VIEW | VIEW1 | 17 | 1105 | 13 |
| 4 | NESTED LOOPS | | 17 | 38573 | 13 |
| 5 | MERGE JOIN CARTESIAN | | 1 | 167 | 12 |
|* 6 | TABLE ACCESS BY INDEX ROWID | TAB2 | 1 | 115 | 4 |
| 7 | INDEX FULL SCAN | (TAB2_IDX) | 94 | | 1 |
| 8 | BUFFER SORT | | 1 | 52 | 8 |
| 9 | VIEW | VIEW2 | 1 | 52 | 8 |
| 10 | SORT UNIQUE | | 1 | 156 | 8 |
| 11 | NESTED LOOPS | | 1 | 156 | 6 |
| 12 | NESTED LOOPS | | 1 | 143 | 6 |
| 13 | NESTED LOOPS OUTER | | 1 | 117 | 5 |
|* 14 | HASH JOIN | | 1 | 104 | 5 |
| 15 | NESTED LOOPS | | 1 | 52 | 2 |
|* 16 | TABLE ACCESS FULL | TAB3 | 1 | 39 | 2 |
|* 17 | INDEX UNIQUE SCAN | (PK_TAB4) | 1 | 13 | |
| 18 | TABLE ACCESS FULL | TAB5 | 82 | 4264 | 2 |
| 19 | VIEW PUSHED PREDICATE | View3 | 1 | 13 | |
| 20 | NESTED LOOPS | | 1 | 52 | 2 |
| 21 | NESTED LOOPS | | 1 | 39 | 2 |
|* 22 | INDEX UNIQUE SCAN | (PK_TAB6) | 1 | 13 | 1 |
|* 23 | INDEX RANGE SCAN | (PK_TAB7) | 1 | 26 | 1 |
|* 24 | INDEX UNIQUE SCAN | (PK_TAB8) | 1 | 13 | |
| 25 | TABLE ACCESS BY INDEX ROWID| TAB9 | 3 | 78 | 1 |
|* 26 | INDEX UNIQUE SCAN | (PK_TAB9) | 1 | | |
|* 27 | INDEX UNIQUE SCAN | (PK_TAB10) | 1 | 13 | |
|* 28 | TABLE ACCESS BY INDEX ROWID | TAB1 | 12 | 25224 | 1 |
|* 29 | INDEX UNIQUE SCAN | (PK_TAB1) | 1 | | |
Predicate Information (identified by operation id):
2 - filter(ROWNUM<=3)
6 - filter("TAB2"."CERT_SERIAL_NUM"=30003)
14 - access("TAB5"."PATH_ID"="TAB4"."PATH_ID")
16 - filter("TAB3"."AUTH_GROUP_ID"<>(-1) AND ("TAB3"."AUTH_GROUP_ID"=0 OR "TAB3"."AUTH_GROUP_ID"=1))
17 - access("TAB3"."PATH_ID"="TAB4"."PATH_ID")
22 - access("TAB5"."DOMAIN_ID"="TAB6"."DOMAIN_ID")
23 - access("TAB6"."DOMAIN_ID"="TAB7"."DOMAIN_ID")
24 - access("TAB7"."RULE_ID"="TAB8"."RULE_ID")
26 - access("TAB9"."POLICY_ID"="TAB5"."POLICY_ID")
27 - access("TAB9"."ASSOCIATED_FORM_ID"="TAB10"."FORM_ID")
28 - filter("VIEW2"."POLICY_ID"="TAB1"."POLICY_ID")
29 - access("TAB1"."TRANSACTION_ID"="TAB2"."TRANSACTION_ID")
Note: cpu costing is off
53 rows selected.
Elapsed: 00:00:08.29
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 COLLECTION ITERATOR (PICKLER FETCH) OF 'DISPLAY'
Statistics
1079 recursive calls
0 db block gets
597 consistent gets
21 physical reads
0 redo size
5177 bytes sent via SQL*Net to client
405 bytes received via SQL*Net from client
5 SQL*Net roundtrips to/from client
63 sorts (memory)
0 sorts (disk)
53 rows processed
3) Execution Plan for VIEW1 <<-- Without any "ORDER BY" clause
SQL> explain plan for SELECT TO_CHAR(QT.TRANSACTION_ID), QT.POLICY_ID, QT.REQUEST_TYPE
2 FROM <VIEW1> QT WHERE QT.CERT_SERIAL_NUM=30003 AND
3 (QT.AUTH_GROUP_ID=0 OR QT.AUTH_GROUP_ID=1) AND ROWNUM <= 3 ORDER
4 BY TRANSACTION_ID ASC
5 /
Explained.
Elapsed: 00:00:10.20
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 3 | 213 | 11 |
| 1 | SORT ORDER BY | | 3 | 213 | 11 |
|* 2 | COUNT STOPKEY | | | | |
| 3 | NESTED LOOPS | | 17 | 1207 | 10 |
| 4 | MERGE JOIN CARTESIAN | | 1 | 32 | 9 |
| 5 | VIEW | VIEW2 | 1 | 26 | 8 |
| 6 | SORT UNIQUE | | 1 | 156 | 8 |
| 7 | NESTED LOOPS | | 1 | 156 | 6 |
| 8 | NESTED LOOPS | | 1 | 143 | 6 |
| 9 | NESTED LOOPS OUTER | | 1 | 117 | 5 |
|* 10 | HASH JOIN | | 1 | 104 | 5 |
| 11 | NESTED LOOPS | | 1 | 52 | 2 |
|* 12 | TABLE ACCESS FULL | TAB3 | 1 | 39 | 2 |
|* 13 | INDEX UNIQUE SCAN | PK_TAB4 | 1 | 13 | |
| 14 | TABLE ACCESS FULL | TAB5 | 82 | 4264 | 2 |
| 15 | VIEW PUSHED PREDICATE | VIEW3 | 1 | 13 | |
| 16 | NESTED LOOPS | | 1 | 52 | 2 |
| 17 | NESTED LOOPS | | 1 | 39 | 2 |
|* 18 | INDEX UNIQUE SCAN | PK_TAB6 | 1 | 13 | 1 |
|* 19 | INDEX RANGE SCAN | PK_TAB7 | 1 | 26 | 1 |
|* 20 | INDEX UNIQUE SCAN | PK_TAB8 | 1 | 13 | |
| 21 | TABLE ACCESS BY INDEX ROWID| TAB9 | 3 | 78 | 1 |
|* 22 | INDEX UNIQUE SCAN | PK_TAB9 | 1 | | |
|* 23 | INDEX UNIQUE SCAN | PK_TAB10 | 1 | 13 | |
| 24 | BUFFER SORT | | 1 | 6 | 9 |
| 25 | TABLE ACCESS BY INDEX ROWID | TAB2 | 1 | 6 | 1 |
|* 26 | INDEX RANGE SCAN | TAB2_IDX2 | 1 | | |
|* 27 | TABLE ACCESS BY INDEX ROWID | TAB1 | 12 | 468 | 1 |
|* 28 | INDEX UNIQUE SCAN | PK_TAB1 | 1 | | |
Predicate Information (identified by operation id):
2 - filter(ROWNUM<=3)
10 - access("TAB5"."PATH_ID"="TAB4"."PATH_ID")
12 - filter("TAB3"."AUTH_GROUP_ID"<>(-1) AND ("TAB3"."AUTH_GROUP_ID"=0 OR "TAB3"."AUTH_GROUP_ID"=1))
13 - access("TAB3"."PATH_ID"="TAB4"."PATH_ID")
18 - access("TAB5"."DOMAIN_ID"="TAB6"."DOMAIN_ID")
19 - access("TAB6"."DOMAIN_ID"="TAB7"."DOMAIN_ID")
20 - access("TAB7"."RULE_ID"="TAB8"."RULE_ID")
22 - access("TAB9"."POLICY_ID"="TAB5"."POLICY_ID")
23 - access("TAB9"."ASSOCIATED_FORM_ID"="TAB10"."FORM_ID")
26 - access("TAB2"."CERT_SERIAL_NUM"=1022)
27 - filter("VIEW2"."POLICY_ID"="TAB1"."POLICY_ID")
28 - access("TAB1"."TRANSACTION_ID"="TAB2"."TRANSACTION_ID")
Note: cpu costing is off
52 rows selected.
Elapsed: 00:00:03.37
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 COLLECTION ITERATOR (PICKLER FETCH) OF 'DISPLAY'
Statistics
38 recursive calls
0 db block gets
287 consistent gets
0 physical reads
0 redo size
5006 bytes sent via SQL*Net to client
405 bytes received via SQL*Net from client
5 SQL*Net roundtrips to/from client
29 sorts (memory)
0 sorts (disk)
52 rows processed

Wheni vl01n delivery quanity not come from order automatic

Similar Messages

Maybe you are looking for